201911 #182
Merged
201911 #182
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
* [device] DellEmc S5232 support for new hwsku C8D48 8 100G ports and 48 50G ports * 10G ports update for S5232 hwsku-C8D48 Signed-off-by: Srideep Devireddy <srideep_devireddy@dell.com>
Change PSU MAX temperature to 80 degree Change tmp75 sensors default temperature value from 25/50 to 70/80 degree.
…ce-cli difference versions can cause compatibility issue between the server and client Signed-off-by: Guohan Lu <lguohan@gmail.com>
Signed-off-by: Guohan Lu <lguohan@gmail.com>
- Updated to latest frr 7.2.1 from the master. - Updated patches accordingly
…face Binding for Multi-NPU platforms (#4491) * [sonic-buildimage] updated minigraph for ACL Table data and ACL Interface binding update for multu-npu platform based on subrole as "Frontend" or "Backend". For backend npu no ACL table is associated. For frontend npu only front-panel interface are associated. Updated with test case and fix typo in sample-mingraph for npu Address Review comments Signed-off-by: Abhishek Dosi <abdosi@microsoft.com> * Fixed the logic as per preview comment. Interface Filter logic only applies to Everflow/Mirror tables. * Address Review Comments.
* Changes for LLDP for Multi NPU Platoforms:- a) Enable LLDP for Host namespace for Management Port b) Make sure Management IP is avaliable in per asic namespace needed for LLDP Chassis configuration c) Make sure chassis mac-address is correct in per asic namespace d) Do not run lldp on eth0 of per asic namespace and avoid chassis configuration for same e) Use Linux hostname instead from Device Metadata for lldp chassis configuration since in multi-npu platforms device metadata hostname will be differnt Signed-off-by: Abhishek Dosi <abdosi@microsoft.com> * Address Review Comment with following changes: a) Use Device Metadata hostname even in per namespace conatiner. updated minigraph parsing for same to have hostname as system hostname and add new key for asic name b) Minigraph changes to have MGMT_INTERFACE Key in per asic/namespace config also as needed for LLDP for setting chassis management IP. Signed-off-by: Abhishek Dosi <abdosi@microsoft.com> * Address Review Comments
…to sonic_device_util.py (#4559) * Moved utility functions for multi-npu platforms from sonic-utilities config/main.py to here so that they can be used any module * Fix the issue with test run during compilation with acl-uploader PR#908 of sonic-utilities. * Fix get_num_npu as it was retuning string and not int * Address Review Comments * Address Review Comments
…ICE (#4573) and then we load image and reboot even if there was existing config_db.json we will look for DHCP Service. we should disbale update_graph in such cases. This behaviour is silimar to what we have in 201811 image.
…backend asics (#4588) Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>
Signed-off-by: Danny Allen <daall@microsoft.com>
[201911][show] Fix abbreviations for 'show ip bgp ...' commands (#909) Changes to support acl-loader and mirror-session config commands for multi-npu platforms. (#908) Changes to commands config reload/load-minigraph (#919) Stop/Start restapi server upon config reload (#911) [config] Add 'interface transceiver' subgroup with 'lpmode' and 'reset' subcommands (#904)
* Adding new BGP peer groups PEER_V4_INT and PEER_V6_INT. The internal BGP sessions will be added to this peer group while the external BGP sessions will be added to the exising PEER_V4 and PEER_V6 peer group. * Check for "ASIC" keyword in the hostname to identify the internal neighbors.
* Changes to support config-setup service for multi-npu platforms. For Multi-npu we are not supporting as of now config initializtion and ZTP. It will support creating config db from minigraph or using config db from previous file system Signed-off-by: Abhishek Dosi <abdosi@microsoft.com> * Address Review Comments. * Address Review comments * Address Review Comments of using pyhton based config load_minigraph/ config save/config reload from shell scripts so that we don't duplicate code. Also while running from shell we will skip stop/start services done by those commands. * Updated to use python command so no code duplication.
…ti NPU platforms (#4600) * The following changes for multi-npu platforms are done - Set the type in device_metadata for asic configuration to be same as host - Set the admin-status of internal bgp sessions as up Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan <arlakshm@microsoft.com>
* [ntp] enable/disable NTP long jump according to reboot type - Enable NTP long jump after cold reboot. - Disable NTP long jump after warrm/fast reboot. Signed-off-by: Ying Xie <ying.xie@microsoft.com> * fix typo * further refactoring * use sonic-db-cli instead
[vnet] Fix IP2ME route creation logic for BITMAP VNET interface (#1284)
PR#39 Setup module versioning Add support for get all Vlans (#37)
mudsut4ke
pushed a commit
that referenced
this pull request
May 11, 2021
872f0a3 [Y-Cable] refactor get_firmware_version to comply with all vendors (#182) cc162d6 [sonic_y_cable]: Decorate all method for mux simulator (#181) fa02416 Change import order in Ycable helper and EEPROM read bytearray change in SFP plugin (#177) 0b60982 [thermal_base] Add setter functions for critical thresholds (#180) 10dc16f [y_cable] add support for enable/disable autoswitch feature on Y cable (#176) c6c81a8 [fan_drawer_base.py] Fix FanDrawer get_status_led interface (#175) Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
jerseyang
pushed a commit
that referenced
this pull request
Jun 4, 2021
872f0a3 [Y-Cable] refactor get_firmware_version to comply with all vendors (#182) cc162d6 [sonic_y_cable]: Decorate all method for mux simulator (#181) fa02416 Change import order in Ycable helper and EEPROM read bytearray change in SFP plugin (#177) 0b60982 [thermal_base] Add setter functions for critical thresholds (#180) 10dc16f [y_cable] add support for enable/disable autoswitch feature on Y cable (#176) c6c81a8 [fan_drawer_base.py] Fix FanDrawer get_status_led interface (#175) Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
- What I did
- How I did it
- How to verify it
- Description for the changelog
- A picture of a cute animal (not mandatory but encouraged)