Rename "wifi" to "Wi-Fi" and "SSID" to "Wi-Fi" name (#468)

gui/public/i18n/en-x-owo/translation.ftl

@@ -67,7 +67,7 @@ reset-quick = quick weset
 
 ## Serial detection stuff
 serial_detection-new_device-p0 = nyu sewiaw device detected~!
-serial_detection-new_device-p1 = entaw youw wifi cwedentiaws~!
+serial_detection-new_device-p1 = entaw youw wi-fi cwedentiaws~!
 serial_detection-new_device-p2 = pwease sewect what youw want to do wit it
 serial_detection-open_wifi = cownnyect to wyfy~
 serial_detection-open_serial = awpen sewiaw console >w<
@@ -351,7 +351,7 @@ settings-osc-vrchat-network-port_out =
     .label = pawt out
     .placeholder = pawt out (defawwt: 9000)
 settings-osc-vrchat-network-address = network addwess
-settings-osc-vrchat-network-address-description = choose which addwess to send out data to vwchat (check yuw wifi settwings on yuw device)
+settings-osc-vrchat-network-address-description = choose which addwess to send out data to vwchat (check yuw wi-fi settwings on yuw device)
 settings-osc-vrchat-network-address-placeholder = vwchat ip addwess
 settings-osc-vrchat-network-trackers = trayckawws
 settings-osc-vrchat-network-trackers-description = toggle teh sending of spweciwic twackers viwa OSC
@@ -366,18 +366,18 @@ onboarding-skip = skipy setup
 onboarding-continue = continyue
 onboarding-wip = wowwk in pwowgress
 
-## WiFi setup
+## Wi-Fi setup
 onboarding-wifi_creds-back = gaww bawwk to intwoduction
-onboarding-wifi_creds = input wifi cwedentials
+onboarding-wifi_creds = input wi-fi cwedentials
 # This cares about multilines
 onboarding-wifi_creds-description =
     teh twawckaws will use these cwedentials to connect wirelessly
     pwease use teh cwedentials that yaww awe cwowently cownyected to
-onboarding-wifi_creds-skip = skipy wifi settiwyngs
+onboarding-wifi_creds-skip = skipy wi-fi settiwyngs
 onboarding-wifi_creds-submit = suwbmyt!
 onboarding-wifi_creds-ssid =
-    .label = SSID
-    .placeholder = Enter SSID
+    .label = wi-fi nawme
+    .placeholder = enter wi-fi nawme
 onboarding-wifi_creds-password =
     .label = Password
     .placeholder = Enter password
@@ -407,15 +407,15 @@ onboarding-done-description = enjoy yoaww fuww body expewwience
 onboarding-done-close = cwose the guide
 
 ## Tracker connection setup
-onboarding-connect_tracker-back = gaww bawwk to wifi cwedentials
+onboarding-connect_tracker-back = gaww bawwk to wi-fi cwedentials
 onboarding-connect_tracker-title = connect twackaws
 onboarding-connect_tracker-description-p0 = now onto teh fun pawwt, connecting awe teh twackaws!
 onboarding-connect_tracker-description-p1 = simply connect awe that awe nawt cownyected yet, through a usb powwt.
 onboarding-connect_tracker-issue-serial = i'm having twouble connecting!
 onboarding-connect_tracker-usb = usb twacker
-onboarding-connect_tracker-connection_status-connecting = sending wifi cwedentials
-onboarding-connect_tracker-connection_status-connected = cownyected to wifi
-onboarding-connect_tracker-connection_status-error = unabwe to cownyect to wifi
+onboarding-connect_tracker-connection_status-connecting = sending wi-fi cwedentials
+onboarding-connect_tracker-connection_status-connected = cownyected to wi-fi
+onboarding-connect_tracker-connection_status-error = unabwe to cownyect to wi-fi
 onboarding-connect_tracker-connection_status-start_connecting = wooking for twackaws
 onboarding-connect_tracker-connection_status-handshake = cownyected to teh sewvew
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
@@ -431,7 +431,7 @@ onboarding-connect_tracker-connected_trackers = { $amount ->
 onboarding-connect_tracker-next = i cownyected awe my twackaws
 
 ## Tracker assignment setup
-onboarding-assign_trackers-back = go bak to wifi credyentials
+onboarding-assign_trackers-back = go bak to wi-fi credyentials
 onboarding-assign_trackers-title = assign twackaws
 onboarding-assign_trackers-description = wets choyse which twackaw goes whewe. cwick on a wocation whewe yowo want to payce a twackaw
 # Look at translation of onboarding-connect_tracker-connected_trackers on how to use plurals

gui/public/i18n/en/translation.ftl

@@ -67,9 +67,9 @@ reset-quick = Quick Reset
 
 ## Serial detection stuff
 serial_detection-new_device-p0 = New serial device detected!
-serial_detection-new_device-p1 = Enter your WiFi credentials!
+serial_detection-new_device-p1 = Enter your Wi-Fi credentials!
 serial_detection-new_device-p2 = Please select what you want to do with it
-serial_detection-open_wifi = Connect to WiFi
+serial_detection-open_wifi = Connect to Wi-Fi
 serial_detection-open_serial = Open Serial Console
 serial_detection-submit = Submit!
 serial_detection-close = Close
@@ -351,7 +351,7 @@ settings-osc-vrchat-network-port_out =
     .label = Port Out
     .placeholder = Port out (default: 9000)
 settings-osc-vrchat-network-address = Network address
-settings-osc-vrchat-network-address-description = Choose which address to send out data to VRChat (check your wifi settings on your device).
+settings-osc-vrchat-network-address-description = Choose which address to send out data to VRChat (check your Wi-Fi settings on your device).
 settings-osc-vrchat-network-address-placeholder = VRChat ip address
 settings-osc-vrchat-network-trackers = Trackers
 settings-osc-vrchat-network-trackers-description = Toggle the sending of specific trackers via OSC.
@@ -366,18 +366,18 @@ onboarding-skip = Skip setup
 onboarding-continue = Continue
 onboarding-wip = Work in progress
 
-## WiFi setup
+## Wi-Fi setup
 onboarding-wifi_creds-back = Go Back to introduction
-onboarding-wifi_creds = Input WiFi credentials
+onboarding-wifi_creds = Input Wi-Fi credentials
 # This cares about multilines
 onboarding-wifi_creds-description =
     The Trackers will use these credentials to connect wirelessly.
     Please use the credentials that you are currently connected to.
-onboarding-wifi_creds-skip = Skip wifi settings
+onboarding-wifi_creds-skip = Skip Wi-Fi settings
 onboarding-wifi_creds-submit = Submit!
 onboarding-wifi_creds-ssid =
-    .label = SSID
-    .placeholder = Enter SSID
+    .label = Wi-Fi name
+    .placeholder = Enter Wi-Fi name
 onboarding-wifi_creds-password =
     .label = Password
     .placeholder = Enter password
@@ -407,15 +407,15 @@ onboarding-done-description = Enjoy your full body experience
 onboarding-done-close = Close the guide
 
 ## Tracker connection setup
-onboarding-connect_tracker-back = Go Back to WiFi credentials
+onboarding-connect_tracker-back = Go Back to Wi-Fi credentials
 onboarding-connect_tracker-title = Connect trackers
 onboarding-connect_tracker-description-p0 = Now onto the fun part, connecting all the trackers!
 onboarding-connect_tracker-description-p1 = Simply connect all that aren't connected yet, through a USB port.
 onboarding-connect_tracker-issue-serial = I'm having trouble connecting!
 onboarding-connect_tracker-usb = USB Tracker
-onboarding-connect_tracker-connection_status-connecting = Sending wifi credentials
-onboarding-connect_tracker-connection_status-connected = Connected to WiFi
-onboarding-connect_tracker-connection_status-error = Unable to connect to Wifi
+onboarding-connect_tracker-connection_status-connecting = Sending Wi-Fi credentials
+onboarding-connect_tracker-connection_status-connected = Connected to Wi-Fi
+onboarding-connect_tracker-connection_status-error = Unable to connect to Wi-Fi
 onboarding-connect_tracker-connection_status-start_connecting = Looking for trackers
 onboarding-connect_tracker-connection_status-handshake = Connected to the Server
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
@@ -431,7 +431,7 @@ onboarding-connect_tracker-connected_trackers = { $amount ->
 onboarding-connect_tracker-next = I connected all my trackers
 
 ## Tracker assignment setup
-onboarding-assign_trackers-back = Go Back to Wifi Credentials
+onboarding-assign_trackers-back = Go Back to Wi-Fi Credentials
 onboarding-assign_trackers-title = Assign trackers
 onboarding-assign_trackers-description = Let's choose which tracker goes where. Click on a location where you want to place a tracker
 # Look at translation of onboarding-connect_tracker-connected_trackers on how to use plurals

gui/public/i18n/es-419/translation.ftl

@@ -67,9 +67,9 @@ reset-quick = Reinicio rápido
 
 ## Serial detection stuff
 serial_detection-new_device-p0 = ¡Nuevo dispositivo serial detectado!
-serial_detection-new_device-p1 = ¡Ingresa tus credenciales del WiFi!
+serial_detection-new_device-p1 = ¡Ingresa tus credenciales del Wi-Fi!
 serial_detection-new_device-p2 = Por favor selecciona que quieres hacer con el
-serial_detection-open_wifi = Conectarse al WiFi
+serial_detection-open_wifi = Conectarse al Wi-Fi
 serial_detection-open_serial = Abrir consola serial
 serial_detection-submit = ¡Enviar!
 serial_detection-close = Cerrar
@@ -351,7 +351,7 @@ settings-osc-vrchat-network-port_out =
     .label = Puerto de salida
     .placeholder = Puerto de salida (por defecto: 9000)
 settings-osc-vrchat-network-address = Dirección de red
-settings-osc-vrchat-network-address-description = Establece la dirección donde se enviarán los datos de VRChat (revisa los ajustes de WiFi de tu dispositivo que tenga el juego).
+settings-osc-vrchat-network-address-description = Establece la dirección donde se enviarán los datos de VRChat (revisa los ajustes de Wi-Fi de tu dispositivo que tenga el juego).
 settings-osc-vrchat-network-address-placeholder = Dirección IP de VRChat
 settings-osc-vrchat-network-trackers = Sensores
 settings-osc-vrchat-network-trackers-description = Habilita el envío de sensores específicos mediante OSC.
@@ -366,14 +366,14 @@ onboarding-skip = Saltar configuración
 onboarding-continue = Continuar
 onboarding-wip = Trabajo en progreso
 
-## WiFi setup
+## Wi-Fi setup
 onboarding-wifi_creds-back = Volver a la introducción
-onboarding-wifi_creds = Ingresar credenciales del WiFi
+onboarding-wifi_creds = Ingresar credenciales del Wi-Fi
 # This cares about multilines
 onboarding-wifi_creds-description =
     Los sensores utilizarán estas credenciales para conectarse inalámbricamente. 
-    Por favor usa las credenciales del WiFi al cuál estás conectado actualmente.
-onboarding-wifi_creds-skip = Saltar ajustes de WiFi
+    Por favor usa las credenciales del Wi-Fi al cuál estás conectado actualmente.
+onboarding-wifi_creds-skip = Saltar ajustes de Wi-Fi
 onboarding-wifi_creds-submit = ¡Enviar!
 onboarding-wifi_creds-ssid =
     .label = SSID
@@ -407,15 +407,15 @@ onboarding-done-description = Disfruta moverte en la realidad virtual
 onboarding-done-close = Cerrar la guía
 
 ## Tracker connection setup
-onboarding-connect_tracker-back = Volver a las credenciales WiFi
+onboarding-connect_tracker-back = Volver a las credenciales Wi-Fi
 onboarding-connect_tracker-title = Conecta tus sensores
 onboarding-connect_tracker-description-p0 = Ahora la parte divertida, ¡Conectar todos tus sensores!
 onboarding-connect_tracker-description-p1 = Simplemente conecta todos los sensores que aún no están conectados, por medio de un puerto USB.
 onboarding-connect_tracker-issue-serial = ¡Tengo problemas conectándolos!
 onboarding-connect_tracker-usb = Sensor USB
-onboarding-connect_tracker-connection_status-connecting = Enviando credenciales WiFi
-onboarding-connect_tracker-connection_status-connected = Conectado al WiFi
-onboarding-connect_tracker-connection_status-error = Incapaz de conectar al WiFi
+onboarding-connect_tracker-connection_status-connecting = Enviando credenciales Wi-Fi
+onboarding-connect_tracker-connection_status-connected = Conectado al Wi-Fi
+onboarding-connect_tracker-connection_status-error = Incapaz de conectar al Wi-Fi
 onboarding-connect_tracker-connection_status-start_connecting = Buscando sensores
 onboarding-connect_tracker-connection_status-handshake = Conectado con el servidor
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
@@ -431,7 +431,7 @@ onboarding-connect_tracker-connected_trackers = { $amount ->
 onboarding-connect_tracker-next = He conectado todos mis sensores
 
 ## Tracker assignment setup
-onboarding-assign_trackers-back = Volver a las credenciales WiFi
+onboarding-assign_trackers-back = Volver a las credenciales Wi-Fi
 onboarding-assign_trackers-title = Asignación de sensores
 onboarding-assign_trackers-description = Debes escoger dónde van los sensores. Has clic en la ubicación donde quieras colocar un sensor
 # Look at translation of onboarding-connect_tracker-connected_trackers on how to use plurals

gui/public/i18n/et/translation.ftl

@@ -67,9 +67,9 @@ reset-quick = Kiir Lähtestamine
 
 ## Serial detection stuff
 serial_detection-new_device-p0 = Uus jadaseade tuvastatud!
-serial_detection-new_device-p1 = Sisestage enda WiFi andmed!
+serial_detection-new_device-p1 = Sisestage enda Wi-Fi andmed!
 serial_detection-new_device-p2 = Palun valige, mida te soovite sellega teha
-serial_detection-open_wifi = Ühendage WiFi-ga
+serial_detection-open_wifi = Ühendage Wi-Fi-ga
 serial_detection-open_serial = Avage Jadakonsool
 serial_detection-submit = Jätka!
 serial_detection-close = Sulge
@@ -351,7 +351,7 @@ settings-osc-vrchat-network-port_out =
     .label = Võrguport välja
     .placeholder = Võrguport välja (vaikimisi: 9000)
 settings-osc-vrchat-network-address = Võrgu aadress
-settings-osc-vrchat-network-address-description = Vali, mis aadressile saata andmeid VRChat-i jaoks (kontrolli enda WiFi seadeid seadmest).
+settings-osc-vrchat-network-address-description = Vali, mis aadressile saata andmeid VRChat-i jaoks (kontrolli enda Wi-Fi seadeid seadmest).
 settings-osc-vrchat-network-address-placeholder = VRChat ip aadress
 settings-osc-vrchat-network-trackers = Jälgia
 settings-osc-vrchat-network-trackers-description = Lülita sisse/välja teatud jälgijate andmete saatmise OSC kaudu.
@@ -366,14 +366,14 @@ onboarding-skip = Jäta seadistamine vahele
 onboarding-continue = Jätka
 onboarding-wip = Töö käib
 
-## WiFi setup
+## Wi-Fi setup
 onboarding-wifi_creds-back = Mine tagasi juhistele
-onboarding-wifi_creds = Sisestage enda WiFi andmed!
+onboarding-wifi_creds = Sisestage enda Wi-Fi andmed!
 # This cares about multilines
 onboarding-wifi_creds-description =
     Jälgijad kasutavad neid andmeid, et ühendada juhtmevabalt. 
-    Palun kasutage neid WiFi andmeid, millega te praegu olete ühendatud.
-onboarding-wifi_creds-skip = Jätke WiFi seaded vahele.
+    Palun kasutage neid Wi-Fi andmeid, millega te praegu olete ühendatud.
+onboarding-wifi_creds-skip = Jätke Wi-Fi seaded vahele.
 onboarding-wifi_creds-submit = Jätka!
 onboarding-wifi_creds-ssid =
     .label = SSID
@@ -407,15 +407,15 @@ onboarding-done-description = Nautige enda kogu keha jälgimis kogemust
 onboarding-done-close = Sulgege juhend
 
 ## Tracker connection setup
-onboarding-connect_tracker-back = Minge tagasi WiFi andmetesse
+onboarding-connect_tracker-back = Minge tagasi Wi-Fi andmetesse
 onboarding-connect_tracker-title = Ühendage jälgijad
 onboarding-connect_tracker-description-p0 = Nüüd lähme lõbusa osa juurde, ühendame kõik jälgijad-
 onboarding-connect_tracker-description-p1 = Lihtsalt ühendage kõik jälgijad, mis ei ole ühendatud läbi USB enda arvutisse.
 onboarding-connect_tracker-issue-serial = Mul on probleeme ühenduse loomisega!
 onboarding-connect_tracker-usb = USB Jälgija
-onboarding-connect_tracker-connection_status-connecting = Saadame WiFi andmeid
-onboarding-connect_tracker-connection_status-connected = Ühendatud WiFi võrguga
-onboarding-connect_tracker-connection_status-error = WiFi-ga ei saa ühendust luua!
+onboarding-connect_tracker-connection_status-connecting = Saadame Wi-Fi andmeid
+onboarding-connect_tracker-connection_status-connected = Ühendatud Wi-Fi võrguga
+onboarding-connect_tracker-connection_status-error = Wi-Fi-ga ei saa ühendust luua!
 onboarding-connect_tracker-connection_status-start_connecting = Jälgijate otsimine
 onboarding-connect_tracker-connection_status-handshake = Ühendatud serveriga
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
@@ -431,7 +431,7 @@ onboarding-connect_tracker-connected_trackers = { $amount ->
 onboarding-connect_tracker-next = Olen ühendanud kõik oma jälgijad
 
 ## Tracker assignment setup
-onboarding-assign_trackers-back = Minge tagasi WiFi andmetesse
+onboarding-assign_trackers-back = Minge tagasi Wi-Fi andmetesse
 onboarding-assign_trackers-title = Määrake jälgijad asukoht
 onboarding-assign_trackers-description = Valime mis jälgijad lähevad kuhu. Vajutage asukohale kuhu te tahate, et jälgija läheks.
 # Look at translation of onboarding-connect_tracker-connected_trackers on how to use plurals

gui/public/i18n/fr/translation.ftl

@@ -366,7 +366,7 @@ onboarding-skip = Passer
 onboarding-continue = Continuer
 onboarding-wip = Pas encore implémenté
 
-## WiFi setup
+## Wi-Fi setup
 onboarding-wifi_creds-back = Retour à l'introduction
 onboarding-wifi_creds = Saisir les identifiants Wi-Fi
 # This cares about multilines
@@ -376,11 +376,11 @@ onboarding-wifi_creds-description =
 onboarding-wifi_creds-skip = Passer la configuration Wi-Fi
 onboarding-wifi_creds-submit = Valider
 onboarding-wifi_creds-ssid =
-    .label = SSID
-    .placeholder = Enter SSID
+    .label = Nom du Wi-Fi
+    .placeholder = Nom
 onboarding-wifi_creds-password =
-    .label = Password
-    .placeholder = Enter password
+    .label = Mot de passe du Wi-Fi
+    .placeholder = Mot de passe
 
 ## Mounting setup
 onboarding-reset_tutorial-back = Retourner à l'alignement des capteurs