Sync up with Linus #95
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
c4iw_poll_cq_on() shouldn't fail the poll operation just because the CQE status is unknown. Rather, it should map this to the "fatal error" status and log the anomaly. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
When CONFIG_PM_SLEEP is disabled, brcm_ahci_{suspend,resume} are not
used, which causes such a build warning to occur:
CC drivers/ata/ahci_brcmstb.o
drivers/ata/ahci_brcmstb.c:212:12: warning: 'brcm_ahci_suspend' defined
but not used [-Wunused-function]
static int brcm_ahci_suspend(struct device *dev)
^
drivers/ata/ahci_brcmstb.c:224:12: warning: 'brcm_ahci_resume' defined
but not used [-Wunused-function]
static int brcm_ahci_resume(struct device *dev)
^
LD drivers/ata/built-in.o
Fixes: 766a2d9 ("ata: add Broadcom AHCI SATA3 driver for STB chips")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch addresses a v4.2-rc1 regression where backend driver module unload happening immediately after TBO->free_device() does internal call_rcu(), will currently result in IRQ context rcu_process_callbacks() use-after-free paging OOPsen. It adds the missing rcu_barrier() in target_backend_unregister() to perform an explicit RCU barrier waiting for all RCU callbacks to complete before releasing target_backend_ops memory, and allowing TBO->module exit to proceed. Also, do the same for fabric drivers in target_unregister_template() to ensure se_deve_entry->rcu_head -> kfree_rcu() callbacks have completed, before allowing target_core_fabric_ops->owner module exit to proceed. Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Make sure all non-READ SCSI commands get targ_xfer_tag initialized to 0xffffffff, not just WRITEs. Double-free of a TUR cmd object occurs under the following scenario: 1. TUR received (targ_xfer_tag is uninitialized and left at 0) 2. TUR status sent 3. First unsolicited NOPIN is sent to initiator (gets targ_xfer_tag of 0) 4. NOPOUT for NOPIN (with TTT=0) arrives - its ExpStatSN acks TUR status, TUR is queued for removal - LIO tries to find NOPIN with TTT=0, but finds the same TUR instead, TUR is queued for removal for the 2nd time (Drop unbalanced conditional bracket usage - nab) Signed-off-by: Alexei Potashnik <alexei@purestorage.com> Signed-off-by: Spencer Baugh <sbaugh@catern.com> Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
If an initiator doesn't have any real LUNs assigned, we should report LUN 0 and a LUN list length of 1. Some versions of Solaris at least go beserk if we report a LUN list length of 0. Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> # v3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This reverts commit a1524f2. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org #v4.1+
This reverts commit fe7173c. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. ATA_ID_COMMAND_SET_3/4 constants are not reverted as they're used by later changes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org #v4.1+
This reverts commit 42b966f. As implemented, ACS-4 sense reporting for ATA devices bypasses error diagnosis and handling in libata degrading EH behavior significantly. Revert the related changes for now. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org #v4.1+
The variable spd0 might be used uninitialized when pdc20621_i2c_read() fails. This also generates a compilation warning with gcc 5.1. tj: use pr_err() Signed-off-by: Tomer Barletz <barletz@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
While IS_ENABLED() is perfectly fine for CONFIG_* symbols, it is not for other symbols such as __BIG_ENDIAN that is provided directly by the compiler. Switch to use CONFIG_CPU_BIG_ENDIAN instead of __BIG_ENDIAN. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
The port is removed synchronously, but the connector delayed. This causes a use after free which can cause a kernel BUG with slug_debug=FPZU. This is fixed by freeing the port after the connector. This fixes a regression introduced with 6b8eeca "drm/dp/mst: close deadlock in connector destruction." Cc: stable@vger.kernel.org Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Dell laptop causes the white noise by login screen and headphone, and the fixup function ALC292_FIXUP_DISABLE_AAMIX can eliminate this noise. Codec: Realtek ALC3235 Vendor Id: 0x10ec0293 Subsystem Id: 0x102806db Cc: <stable@vger.kernel.org> BugLink: https://bugs.launchpad.net/bugs/1484334 Signed-off-by: Woodrow Shen <woodrow.shen@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
In commit d328c9d Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Apr 10 16:22:37 2015 +0200 drm/i915: Select starting pipe bpp irrespective or the primary plane we started to select the pipe bpp from sink capabilities and not from the primary framebuffer - that one might change (and we don't want to incur a modeset) and sprites might contain higher bpp content too. We also selected dithering on a 8 bpc screen displaying a 24bpp rgb primary, because pipe_bpp is 24 for such a typical 8 bpc sink, but since the commit mentioned above, base_bpp is always the absolute maximum supported by the hardware, e.g., 36 bpp on my Ironlake chip. Iow. the only way to not get dithering would have been to connect a deep color 12 bpc display, so pipe_bpp == 36 == base_bpp. Hence only enable dithering on 6bpc screens where we difinitely and always want it. Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Reported-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
…m set_config This should be much cleaner, with the same effects. (cherry picked for v4.2 from commit fb9d6cf) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=90398 Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch is based on the upstream commit 5ac1c4b and amended for v4.2 to make sure it works as intended. Repeated calls to begin_crtc_commit can cause warnings like this: [ 169.127746] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:616 [ 169.127835] in_atomic(): 0, irqs_disabled(): 1, pid: 1947, name: kms_flip [ 169.127840] 3 locks held by kms_flip/1947: [ 169.127843] #0: (&dev->mode_config.mutex){+.+.+.}, at: [<ffffffff814774bc>] __drm_modeset_lock_all+0x9c/0x130 [ 169.127860] #1: (crtc_ww_class_acquire){+.+.+.}, at: [<ffffffff814774cd>] __drm_modeset_lock_all+0xad/0x130 [ 169.127870] #2: (crtc_ww_class_mutex){+.+.+.}, at: [<ffffffff81477178>] drm_modeset_lock+0x38/0x110 [ 169.127879] irq event stamp: 665690 [ 169.127882] hardirqs last enabled at (665689): [<ffffffff817ffdb5>] _raw_spin_unlock_irqrestore+0x55/0x70 [ 169.127889] hardirqs last disabled at (665690): [<ffffffffc0197a23>] intel_pipe_update_start+0x113/0x5c0 [i915] [ 169.127936] softirqs last enabled at (665470): [<ffffffff8108a766>] __do_softirq+0x236/0x650 [ 169.127942] softirqs last disabled at (665465): [<ffffffff8108ae75>] irq_exit+0xc5/0xd0 [ 169.127951] CPU: 1 PID: 1947 Comm: kms_flip Not tainted 4.1.0-rc4-patser+ #4039 [ 169.127954] Hardware name: LENOVO 2349AV8/2349AV8, BIOS G1ETA5WW (2.65 ) 04/15/2014 [ 169.127957] ffff8800c49036f0 ffff8800cde5fa28 ffffffff817f6907 0000000080000001 [ 169.127964] 0000000000000000 ffff8800cde5fa58 ffffffff810aebed 0000000000000046 [ 169.127970] ffffffff81c5d518 0000000000000268 0000000000000000 ffff8800cde5fa88 [ 169.127981] Call Trace: [ 169.127992] [<ffffffff817f6907>] dump_stack+0x4f/0x7b [ 169.128001] [<ffffffff810aebed>] ___might_sleep+0x16d/0x270 [ 169.128008] [<ffffffff810aed38>] __might_sleep+0x48/0x90 [ 169.128017] [<ffffffff817fc359>] mutex_lock_nested+0x29/0x410 [ 169.128073] [<ffffffffc01635f0>] ? vgpu_write64+0x220/0x220 [i915] [ 169.128138] [<ffffffffc017fddf>] ? ironlake_update_primary_plane+0x2ff/0x410 [i915] [ 169.128198] [<ffffffffc0190e75>] intel_frontbuffer_flush+0x25/0x70 [i915] [ 169.128253] [<ffffffffc01831ac>] intel_finish_crtc_commit+0x4c/0x180 [i915] [ 169.128279] [<ffffffffc00784ac>] drm_atomic_helper_commit_planes+0x12c/0x240 [drm_kms_helper] [ 169.128338] [<ffffffffc0184264>] __intel_set_mode+0x684/0x830 [i915] [ 169.128378] [<ffffffffc018a84a>] intel_crtc_set_config+0x49a/0x620 [i915] [ 169.128385] [<ffffffff817fdd39>] ? mutex_unlock+0x9/0x10 [ 169.128391] [<ffffffff81467b69>] drm_mode_set_config_internal+0x69/0x120 [ 169.128398] [<ffffffff8119b547>] ? might_fault+0x57/0xb0 [ 169.128403] [<ffffffff8146bf93>] drm_mode_setcrtc+0x253/0x620 [ 169.128409] [<ffffffff8145c600>] drm_ioctl+0x1a0/0x6a0 [ 169.128415] [<ffffffff810b3b41>] ? get_parent_ip+0x11/0x50 [ 169.128424] [<ffffffff811e9ab8>] do_vfs_ioctl+0x2f8/0x530 [ 169.128429] [<ffffffff810d0fcd>] ? trace_hardirqs_on+0xd/0x10 [ 169.128435] [<ffffffff812e7676>] ? selinux_file_ioctl+0x56/0x100 [ 169.128439] [<ffffffff811e9d71>] SyS_ioctl+0x81/0xa0 [ 169.128445] [<ffffffff81800697>] system_call_fastpath+0x12/0x6f Solve it by using the newly introduced drm_atomic_helper_commit_planes_on_crtc. The problem here was that the drm_atomic_helper_commit_planes() helper we were using was basically designed to do begin_crtc_commit(crtc #1) begin_crtc_commit(crtc #2) ... commit all planes finish_crtc_commit(crtc #1) finish_crtc_commit(crtc #2) The problem here is that since our hardware relies on vblank evasion, our CRTC 'begin' function waits until we're out of the danger zone in which register writes might wind up straddling the vblank, then disables interrupts; our 'finish' function re-enables interrupts after the registers have been written. The expectation is that the operations between 'begin' and 'end' must be performed without sleeping (since interrupts are disabled) and should happen as quickly as possible. By clumping all of the 'begin' calls together, we introducing a couple problems: * Subsequent 'begin' invocations might sleep (which is illegal) * The first 'begin' ensured that we were far enough from the vblank that we could write our registers safely and ensure they all fell within the same frame. Adding extra delay waiting for subsequent CRTC's wasn't accounted for and could put us back into the 'danger zone' for CRTC #1. This commit solves the problem by using a new helper that allows an order of operations like: for each crtc { begin_crtc_commit(crtc) // sleep (maybe), then disable interrupts commit planes for this specific CRTC end_crtc_commit(crtc) // reenable interrupts } so that sleeps will only be performed while interrupts are enabled and we can be sure that registers for a CRTC will be written immediately once we know we're in the safe zone. The crtc->config->base.crtc update may seem unrelated, but the helper will use it to obtain the crtc for the state. Without the update it will dereference NULL and crash. Changes since v1: - Use Matt Roper's commit message. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=90398 Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
At the last iteration of the loop, j may equal zero and thus tp_list[j - 1] causes an invalid read. Change the logic of the loop so that j - 1 is always >= 0. Cc: stable@vger.kernel.org Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The recent refactoring of the IGMP and MLD parsing code into ipv6_mc_check_mld() / ip_mc_check_igmp() introduced a potential crash / BUG() invocation for bridges: I wrongly assumed that skb_get() could be used as a simple reference counter for an skb which is not the case. skb_get() bears additional semantics, a user count. This leads to a BUG() invocation in pskb_expand_head() / kernel panic if pskb_may_pull() is called on an skb with a user count greater than one - unfortunately the refactoring did just that. Fixing this by removing the skb_get() call and changing the API: The caller of ipv6_mc_check_mld() / ip_mc_check_igmp() now needs to additionally check whether the returned skb_trimmed is a clone. Fixes: 9afd85c ("net: Export IGMP/MLD message validation code") Reported-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When generating /proc/net/route we emit a header followed by a line for each route. When a short read is performed we will restart this process based on the open file descriptor. When calculating the start point we fail to take into account that the 0th entry is the header. This leads us to skip the first entry when doing a continuation read. This can be easily seen with the comparison below: while read l; do echo "$l"; done </proc/net/route >A cat /proc/net/route >B diff -bu A B | grep '^[+-]' On my example machine I have approximatly 10KB of route output. There we see the very first non-title element is lost in the while read case, and an entry around the 8K mark in the cat case: +wlan0 00000000 02021EAC 0003 0 0 400 00000000 0 0 0 -tun1 00C0AC0A 00000000 0001 0 0 950 00C0FFFF 0 0 0 Fix up the off-by-one when reaquiring position on continuation. Fixes: 8be33e9 ("fib_trie: Fib walk rcu should take a tnode and key instead of a trie and a leaf") BugLink: http://bugs.launchpad.net/bugs/1483440 Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
There are some MAC registers that need to be kept in sync with the link state parameters, see adjust_link(). However, after a MAC soft reset default values for these registers are assumed. In some cases (excepting if down/ if up for example) adjust_link() does not see that these values were reset to default because the priv->old* link parameters were left unchanged. So, reset the priv->old* link params as well during a MAC reset to let adjust_link() restore the MAC link settings to the actual link state values. Fixes following case, for example: Setting link to 100M, changing MTU (implies MAC reset), link state remains unchanged to 100M but MAC registers were reset to default (1G) breaking the connectivity w/ the PHY. Closing and re-opening the interface would restore the MAC link parameters to the correct values. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The code in question is called outside of standard driver probe()/remove() callbacks and thus will not benefit from use of devm* infrastructure. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
When replacing del_timer() with del_timer_sync(), I introduced a deadlock condition : reqsk_queue_unlink() is called from inet_csk_reqsk_queue_drop() inet_csk_reqsk_queue_drop() can be called from many contexts, one being the timer handler itself (reqsk_timer_handler()). In this case, del_timer_sync() loops forever. Simple fix is to test if timer is pending. Fixes: 2235f2a ("inet: fix races with reqsk timers") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
…code Before this commit, the following would happen: a) acpi_video_get_backlight_type() gets called b) acpi_video_get_backlight_type() calls acpi_video_init_backlight_type() c) acpi_video_init_backlight_type() locks its function static init_mutex d) acpi_video_init_backlight_type() calls backlight_register_notifier() e) backlight_register_notifier() takes its notifier-chain lock And when the backlight notifier chain gets called we've: 1) blocking_notifier_call_chain() gets called 2) blocking_notifier_call_chain() takes the notifier-chain lock 3) blocking_notifier_call_chain() calls acpi_video_backlight_notify() 4) acpi_video_backlight_notify() calls acpi_video_get_backlight_type() 5) acpi_video_get_backlight_type() calls acpi_video_init_backlight_type() 6) acpi_video_init_backlight_type() locks its function static init_mutex So in the first call sequence we have: a) init_mutex gets locked b) notifier-chain gets locked and in the second call sequence we have: 1) notifier-chain gets locked 2) init_mutex gets locked And we've a circular locking dependency. This specific locking dependency is fixable without using the big hammer otherwise known as a workqueue, but further analysis shows a similar problem with the backlight notifier chain lock vs register_count_mutex from drivers/acpi/acpi_video.c, and fixing that becomes problematic. So this commit simply fixes this with the big hammer, performance wise this is a non issue as we expect the work to get scheduled exactly zero or one times during normal system use. Fixes: 93a291d (ACPI / video: Move backlight notifier to video_detect.c) Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
During probe free the memory allocated to "exynos_info" in case of unknown SoC type. Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Lukasz Majewski <l.majewski@samsung.com> [k.kozlowski: Rebased the patch around if(of_machine_is_compatible)] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A recent change to the cpu_cooling code introduced a AB-BA deadlock
scenario between the cpufreq_policy_notifier_list rwsem and the
cooling_cpufreq_lock. This is caused by cooling_cpufreq_lock being held
before the registration/removal of the notifier block (an operation
which takes the rwsem), and the notifier code itself which takes the
locks in the reverse order:
======================================================
[ INFO: possible circular locking dependency detected ]
3.18.0+ #1453 Not tainted
-------------------------------------------------------
rc.local/770 is trying to acquire lock:
(cooling_cpufreq_lock){+.+.+.}, at: [<c04abfc4>] cpufreq_thermal_notifier+0x34/0xfc
but task is already holding lock:
((cpufreq_policy_notifier_list).rwsem){++++.+}, at: [<c0042f04>] __blocking_notifier_call_chain+0x34/0x68
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 ((cpufreq_policy_notifier_list).rwsem){++++.+}:
[<c06bc3b0>] down_write+0x44/0x9c
[<c0043444>] blocking_notifier_chain_register+0x28/0xd8
[<c04ad610>] cpufreq_register_notifier+0x68/0x90
[<c04abe4c>] __cpufreq_cooling_register.part.1+0x120/0x180
[<c04abf44>] __cpufreq_cooling_register+0x98/0xa4
[<c04abf8c>] cpufreq_cooling_register+0x18/0x1c
[<bf0046f8>] imx_thermal_probe+0x1c0/0x470 [imx_thermal]
[<c037cef8>] platform_drv_probe+0x50/0xac
[<c037b710>] driver_probe_device+0x114/0x234
[<c037b8cc>] __driver_attach+0x9c/0xa0
[<c0379d68>] bus_for_each_dev+0x5c/0x90
[<c037b204>] driver_attach+0x24/0x28
[<c037ae7c>] bus_add_driver+0xe0/0x1d8
[<c037c0cc>] driver_register+0x80/0xfc
[<c037cd80>] __platform_driver_register+0x50/0x64
[<bf007018>] 0xbf007018
[<c0008a5c>] do_one_initcall+0x88/0x1d8
[<c0095da4>] load_module+0x1768/0x1ef8
[<c0096614>] SyS_init_module+0xe0/0xf4
[<c000ec00>] ret_fast_syscall+0x0/0x48
-> #0 (cooling_cpufreq_lock){+.+.+.}:
[<c00619f8>] lock_acquire+0xb0/0x124
[<c06ba3b4>] mutex_lock_nested+0x5c/0x3d8
[<c04abfc4>] cpufreq_thermal_notifier+0x34/0xfc
[<c0042bf4>] notifier_call_chain+0x4c/0x8c
[<c0042f20>] __blocking_notifier_call_chain+0x50/0x68
[<c0042f58>] blocking_notifier_call_chain+0x20/0x28
[<c04ae62c>] cpufreq_set_policy+0x7c/0x1d0
[<c04af3cc>] store_scaling_governor+0x74/0x9c
[<c04ad418>] store+0x90/0xc0
[<c0175384>] sysfs_kf_write+0x54/0x58
[<c01746b4>] kernfs_fop_write+0xdc/0x190
[<c010dcc0>] vfs_write+0xac/0x1b4
[<c010dfec>] SyS_write+0x44/0x90
[<c000ec00>] ret_fast_syscall+0x0/0x48
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock((cpufreq_policy_notifier_list).rwsem);
lock(cooling_cpufreq_lock);
lock((cpufreq_policy_notifier_list).rwsem);
lock(cooling_cpufreq_lock);
*** DEADLOCK ***
7 locks held by rc.local/770:
#0: (sb_writers#6){.+.+.+}, at: [<c010dda0>] vfs_write+0x18c/0x1b4
#1: (&of->mutex){+.+.+.}, at: [<c0174678>] kernfs_fop_write+0xa0/0x190
#2: (s_active#52){.+.+.+}, at: [<c0174680>] kernfs_fop_write+0xa8/0x190
#3: (cpu_hotplug.lock){++++++}, at: [<c0026a60>] get_online_cpus+0x34/0x90
#4: (cpufreq_rwsem){.+.+.+}, at: [<c04ad3e0>] store+0x58/0xc0
#5: (&policy->rwsem){+.+.+.}, at: [<c04ad3f8>] store+0x70/0xc0
#6: ((cpufreq_policy_notifier_list).rwsem){++++.+}, at: [<c0042f04>] __blocking_notifier_call_chain+0x34/0x68
stack backtrace:
CPU: 0 PID: 770 Comm: rc.local Not tainted 3.18.0+ #1453
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<c00121c8>] (dump_backtrace) from [<c0012360>] (show_stack+0x18/0x1c)
r6:c0b85a80 r5:c0b75630 r4:00000000 r3:00000000
[<c0012348>] (show_stack) from [<c06b6c48>] (dump_stack+0x7c/0x98)
[<c06b6bcc>] (dump_stack) from [<c06b42a4>] (print_circular_bug+0x28c/0x2d8)
r4:c0b85a80 r3:d0071d40
[<c06b4018>] (print_circular_bug) from [<c00613b0>] (__lock_acquire+0x1acc/0x1bb0)
r10:c0b50660 r8:c09e6d80 r7:d0071d40 r6:c11d0f0c r5:00000007 r4:d0072240
[<c005f8e4>] (__lock_acquire) from [<c00619f8>] (lock_acquire+0xb0/0x124)
r10:00000000 r9:c04abfc4 r8:00000000 r7:00000000 r6:00000000 r5:c0a06f0c
r4:00000000
[<c0061948>] (lock_acquire) from [<c06ba3b4>] (mutex_lock_nested+0x5c/0x3d8)
r10:ec853800 r9:c0a06ed4 r8:d0071d40 r7:c0a06ed4 r6:c11d0f0c r5:00000000
r4:c04abfc4
[<c06ba358>] (mutex_lock_nested) from [<c04abfc4>] (cpufreq_thermal_notifier+0x34/0xfc)
r10:ec853800 r9:ec85380c r8:d00d7d3c r7:c0a06ed4 r6:d00d7d3c r5:00000000
r4:fffffffe
[<c04abf90>] (cpufreq_thermal_notifier) from [<c0042bf4>] (notifier_call_chain+0x4c/0x8c)
r7:00000000 r6:00000000 r5:00000000 r4:fffffffe
[<c0042ba8>] (notifier_call_chain) from [<c0042f20>] (__blocking_notifier_call_chain+0x50/0x68)
r8:c0a072a4 r7:00000000 r6:d00d7d3c r5:ffffffff r4:c0a06fc8 r3:ffffffff
[<c0042ed0>] (__blocking_notifier_call_chain) from [<c0042f58>] (blocking_notifier_call_chain+0x20/0x28)
r7:ec98b540 r6:c13ebc80 r5:ed76e600 r4:d00d7d3c
[<c0042f38>] (blocking_notifier_call_chain) from [<c04ae62c>] (cpufreq_set_policy+0x7c/0x1d0)
[<c04ae5b0>] (cpufreq_set_policy) from [<c04af3cc>] (store_scaling_governor+0x74/0x9c)
r7:ec98b540 r6:0000000c r5:ec98b540 r4:ed76e600
[<c04af358>] (store_scaling_governor) from [<c04ad418>] (store+0x90/0xc0)
r6:0000000c r5:ed76e6d4 r4:ed76e600
[<c04ad388>] (store) from [<c0175384>] (sysfs_kf_write+0x54/0x58)
r8:0000000c r7:d00d7f78 r6:ec98b540 r5:0000000c r4:ec853800 r3:0000000c
[<c0175330>] (sysfs_kf_write) from [<c01746b4>] (kernfs_fop_write+0xdc/0x190)
r6:ec98b540 r5:00000000 r4:00000000 r3:c0175330
[<c01745d8>] (kernfs_fop_write) from [<c010dcc0>] (vfs_write+0xac/0x1b4)
r10:0162aa70 r9:d00d6000 r8:0000000c r7:d00d7f78 r6:0162aa70 r5:0000000c
r4:eccde500
[<c010dc14>] (vfs_write) from [<c010dfec>] (SyS_write+0x44/0x90)
r10:0162aa70 r8:0000000c r7:eccde500 r6:eccde500 r5:00000000 r4:00000000
[<c010dfa8>] (SyS_write) from [<c000ec00>] (ret_fast_syscall+0x0/0x48)
r10:00000000 r8:c000edc4 r7:00000004 r6:000216cc r5:0000000c r4:0162aa70
Solve this by moving to finer grained locking - use one mutex to protect
the cpufreq_dev_list as a whole, and a separate lock to ensure correct
ordering of cpufreq notifier registration and removal.
cooling_list_lock is taken within cooling_cpufreq_lock on
(un)registration to preserve the behavior of the code, i.e. to
atomically add/remove to the list and (un)register the notifier.
Fixes: 2dcd851 ("thermal: cpu_cooling: Update always cpufreq policy with
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Its always set before getting used, don't initialize it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
If a valid cpufreq_dev is found for policy->cpu, we should update the policy and quit the for loop. There is no need to keep traversing the list of cpufreq_dev's. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
We just need to take care of single event here and there is no need to increase indentation level of most of the code (which causes lines longer that 80 columns to break). Kill the switch block. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
That's what it is for, lets name it properly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
That's what it is for, lets name it properly. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Martin KaFai Lau says: ==================== ipv6: Fix a potential deadlock when creating pcpu rt v1 -> v2: A minor change in the commit message of patch 2. This patch series fixes a potential deadlock when creating a pcpu rt. It happens when dst_alloc() decided to run gc. Something like this: read_lock(&table->tb6_lock); ip6_rt_pcpu_alloc() => dst_alloc() => ip6_dst_gc() => write_lock(&table->tb6_lock); /* oops */ Patch 1 and 2 are some prep works. Patch 3 is the fix. Original report: https://bugzilla.kernel.org/show_bug.cgi?id=102291 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
VxLAN offloading is not functional if the NIC is running in multichannel mode (UMC, FLEX-10, VNIC...). Enabling this additionally kills whole connectivity through the NIC and the device needs to be down and up to restore it. The firmware should take care about it and does not allow the conversion of interface to tunnel type (be_cmd_manage_iface) or should support VxLAN offloading if multichannel config is enabled. I have tested this on the latest available firmware (10.6.144.21). Result: [root@sm-04 ~]# ip link set enp5s0f0 up[root@sm-04 ~]# ip addr add 172.30.10.50/24 dev enp5s0f0 [root@sm-04 ~]# ping -c 3 172.30.10.254PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data. 64 bytes from 172.30.10.254: icmp_seq=1 ttl=64 time=0.317 ms 64 bytes from 172.30.10.254: icmp_seq=2 ttl=64 time=0.187 ms 64 bytes from 172.30.10.254: icmp_seq=3 ttl=64 time=0.188 ms --- 172.30.10.254 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2000ms rtt min/avg/max/mdev = 0.187/0.230/0.317/0.063 ms [root@sm-04 ~]# ip link add link enp5s0f0 vxlan10 type vxlan id 10 remote 172.30.10.60 dstport 4789 [root@sm-04 ~]# ip link set vxlan10 up [ 7900.442811] be2net 0000:05:00.0: Enabled VxLAN offloads for UDP port 4789 [ 7900.455722] be2net 0000:05:00.1: Enabled VxLAN offloads for UDP port 4789 [ 7900.468635] be2net 0000:05:00.2: Enabled VxLAN offloads for UDP port 4789 [ 7900.481553] be2net 0000:05:00.3: Enabled VxLAN offloads for UDP port 4789 [root@sm-04 ~]# ping -c 3 172.30.10.254 PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data. --- 172.30.10.254 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 1999ms [root@sm-04 ~]# ip link set vxlan10 down [ 7959.434093] be2net 0000:05:00.0: Disabled VxLAN offloads for UDP port 4789 [ 7959.444792] be2net 0000:05:00.1: Disabled VxLAN offloads for UDP port 4789 [ 7959.455592] be2net 0000:05:00.2: Disabled VxLAN offloads for UDP port 4789 [ 7959.466416] be2net 0000:05:00.3: Disabled VxLAN offloads for UDP port 4789 [root@sm-04 ~]# ip link del vxlan10 [root@sm-04 ~]# ping -c 3 172.30.10.254 PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data. --- 172.30.10.254 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 1999ms [root@sm-04 ~]# ip link set enp5s0f0 down [root@sm-04 ~]# ip link set enp5s0f0 up [ 8071.019003] be2net 0000:05:00.0 enp5s0f0: Link is Up [root@sm-04 ~]# ping -c 3 172.30.10.254 PING 172.30.10.254 (172.30.10.254) 56(84) bytes of data. 64 bytes from 172.30.10.254: icmp_seq=1 ttl=64 time=0.318 ms 64 bytes from 172.30.10.254: icmp_seq=2 ttl=64 time=0.196 ms 64 bytes from 172.30.10.254: icmp_seq=3 ttl=64 time=0.194 ms --- 172.30.10.254 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2000ms rtt min/avg/max/mdev = 0.194/0.236/0.318/0.057 ms Cc: Sathya Perla <sathya.perla@avagotech.com> Cc: Ajit Khaparde <ajit.khaparde@avagotech.com> Cc: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Ajit Khaparde <ajit.khaparde@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This is an HP-branded Sierra Wireless EM7355: https://bugzilla.redhat.com/show_bug.cgi?id=1223646#c2 Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/phy/smsc.c:127:3-4: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
…rnel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "A fix for a subtle bug introduced back during 3.17 cycle which interferes with setting configurations under specific conditions" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: use trialcs->mems_allowed as a temp variable
…rnel/git/tj/libata Pull libata fixes from Tejun Heo: "Three minor device-specific fixes and revert of NCQ autosense added during this -rc1. It turned out that NCQ autosense as currently implemented interferes with the usual error handling behavior. It will be revisited in the near future" * 'for-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: ahci_brcmstb: Fix misuse of IS_ENABLED sata_sx4: Check return code from pdc20621_i2c_read() Revert "libata: Implement NCQ autosense" Revert "libata: Implement support for sense data reporting" Revert "libata-eh: Set 'information' field for autosense" ata: ahci_brcmstb: Fix warnings with CONFIG_PM_SLEEP=n
…t/dledford/rdma Pull rdma bugfix from Doug Ledford: "Bugfix in iw_cxgb4" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: iw_cxgb4: gracefully handle unknown CQE status errors
Allow the topology code to be compiled out so that users who don't need topology don't need to havve the code compiled in, saving them some memory. Some more configuration could be added to remove some of the hooks into the core data structures but that is probably best done with some refactoring to use functions to do the updates of the data structures rather than ifdefing in the code as we'd need to do at the minute. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
Pull drm fixes from Dave Airlie: "These came in late last week, I wanted to look over the mst one before forwarding, but it seems good. Just three i915 and one MST fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Commit planes on each crtc separately. drm/i915: calculate primary visibility changes instead of calling from set_config drm/i915: Only dither on 6bpc panels drm/dp/mst: Remove port after removing connector.
Since the topology API is still in sufficient flux for changes to be identified disable the use of the userspace ABI by adding #error statements to the code, ensuring that nobody relies on the headers as currently defined. It is expected that this change will be reverted for v4.3. Signed-off-by: Mark Brown <broonie@kernel.org>
…oul/slave-dma Pull dmaengine fix from Vinod Koul: "We recently found issue with dma_request_slave_channel() API causing privatecnt value to go bad. This is fixed by balancing the privatecnt" * tag 'dmaengine-fix-4.2-rc8' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: fix balance of privatecnt inc/dec operations
The object tt_local is allocated with kmalloc and not initialized when the function batadv_tt_local_add checks for the vlan. But this function can only cleanup the object when the (not yet initialized) reference counter of the object is 1. This is unlikely and thus the object would leak when the vlan could not be found. Instead the uninitialized object tt_local has to be freed manually and the pointer has to set to NULL to avoid calling the function which would try to decrement the reference counter of the not existing object. CID: 1316518 Fixes: 354136b ("batman-adv: fix kernel crash due to missing NULL checks") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
REPORT LUNS should not fail just because the allocation length is less than 16. The relevant section of SPC-4 is: 4.2.5.6 Allocation length The ALLOCATION LENGTH field specifies the maximum number of bytes or blocks that an application client has allocated in the Data-In Buffer. The ALLOCATION LENGTH field specifies bytes unless a different requirement is stated in the command definition. An allocation length of zero specifies that no data shall be transferred. This condition shall not be considered an error. So we should just truncate our response rather than return an error. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Spencer Baugh <sbaugh@catern.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
The fix for deadlock in PM in commit [1ee23fe: ALSA: usb-audio: Fix deadlocks at resuming] introduced a new check of in_pm flag. However, the brainless patch author evaluated it in a wrong way (logical AND instead of logical OR), thus usb_autopm_get_interface() is wrongly called at probing, leading to unbalance of runtime PM refcount. This patch fixes it by correcting the logic. Reported-by: Hans Yang <hansy@nvidia.com> Fixes: 1ee23fe ('ALSA: usb-audio: Fix deadlocks at resuming') Cc: <stable@vger.kernel.org> [v3.15+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested with W541 and Ultra Dock 170w Signed-off-by: Rick Sherman <rick@shermdog.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
…m/linux/kernel/git/broonie/sound into for-linus ASoC: Disable topology support for v4.2 The topology code merged in the v4.2 merge window introduced a new ABI which was believed to be suitable for use but subsequently additional work by the developers of this feature have revealed some problems that need to be addressed. In order to allow this to be done without having to support the initial ABI add Kconfig to disable the build and also add some #error statements to the UAPI header so users can't use them.
Since commit feb44f1 (x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs) Xen guests need a full APIC driver and thus should depend on X86_LOCAL_APIC. This fixes an i386 build failure with !SMP && !CONFIG_X86_UP_APIC by disabling Xen support in this configuration. Users needing Xen support in a non-SMP i386 kernel will need to enable CONFIG_X86_UP_APIC. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org>
…/evalenti/linux-soc-thermal Pull thermal fixes from Eduardo Valentin: "Last minute fixes on the thermal-soc tree. There is a fix of a long lasting bug in cpu cooling device, thanks for RMK for being pushing this" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal/cpu_cooling: update policy limits if clipped_freq < policy->max thermal/cpu_cooling: rename max_freq as clipped_freq in notifier thermal/cpu_cooling: rename cpufreq_val as clipped_freq thermal/cpu_cooling: convert 'switch' block to 'if' block in notifier thermal/cpu_cooling: quit early after updating policy thermal/cpu_cooling: No need to initialize max_freq to 0 thermal: cpu_cooling: fix lockdep problems in cpu_cooling thermal: power_allocator: do not use devm* interfaces
Pull SCSI target fixes from Nicholas Bellinger: "This contains a v4.2-rc specific RCU module unload regression bug-fix, a long-standing iscsi-target bug-fix for duplicate target_xfer_tags during NOP processing from Alexei, and two more small REPORT_LUNs emulation related patches to make Solaris FC host LUN scanning happy from Roland. There is also one patch not included that allows target-core to limit the number of fabric driver SGLs per I/O request using residuals, that is currently required as a work-around for FC hosts which don't honor EVPD block-limits settings. At this point, it will most likely become for-next material" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix handling of small allocation lengths in REPORT LUNS target: REPORT LUNS should return LUN 0 even for dynamic ACLs target/iscsi: Fix double free of a TUR followed by a solicited NOPOUT target: Perform RCU callback barrier before backend/fabric unload
…t/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a small collecton of sound fix patches. The most significant one is the disablement of newly introduced topology API. Its ABI couldn't be stabilized enough, so we decided to delay for 4.3 in the end. Other than that, all oneliner fixes: a USB-audio runtime PM fix and a couple of HD-audio quirks" * tag 'sound-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add dock support for Thinkpad W541 (17aa:2211) ALSA: usb-audio: Fix runtime PM unbalance ASoC: topology: Disable use from userspace ASoC: topology: Add Kconfig option for topology ALSA: hda - Fix the white noise on Dell laptop
…ux/kernel/git/xen/tip Pull xen build fix from David Vrabel: "Fix i386 build with an (uncommon) configuration" * tag 'for-linus-4.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: make CONFIG_XEN depend on CONFIG_X86_LOCAL_APIC
Pull networking fixes from David Miller:
1) Out of bounds array access in 802.11 minstrel code, from Adrien
Schildknecht.
2) Don't use skb_get() in IGMP/MLD code paths, as this makes
pskb_may_pull() BUG. From Linus Luessing.
3) Fix off by one in ipv4 route dumping code, from Andy Whitcroft.
4) Fix deadlock in reqsk_queue_unlink(), from Eric Dumazet.
5) Fix ppp device deregistration wrt. netns deletion, from Guillaume
Nault.
6) Fix deadlock when creating per-cpu ipv6 routes, from Martin KaFai
Lau.
7) Fix memory leak in batman-adv code, from Sven Eckelmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
batman-adv: Fix memory leak on tt add with invalid vlan
net: phy: fix semicolon.cocci warnings
net: qmi_wwan: add HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module
be2net: avoid vxlan offloading on multichannel configs
ipv6: Fix a potential deadlock when creating pcpu rt
ipv6: Add rt6_make_pcpu_route()
ipv6: Remove un-used argument from ip6_dst_alloc()
net: phy: workaround for buggy cable detection by LAN8700 after cable plugging
net: ethernet: micrel: fix an error code
ppp: fix device unregistration upon netns deletion
net: phy: fix PHY_RUNNING in phy_state_machine
Revert "net: limit tcp/udp rmem/wmem to SOCK_{RCV,SND}BUF_MIN"
inet: fix potential deadlock in reqsk_queue_unlink()
gianfar: Restore link state settings after MAC reset
ipv4: off-by-one in continuation handling in /proc/net/route
net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code
mac80211: fix invalid read in minstrel_sort_best_tp_rates()
* acpi-video: ACPI / video: Fix circular lock dependency issue in the video-detect code * cpufreq-fixes: cpufreq: exynos: Fix for memory leak in case SoC name does not match
…nel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI backlight code and a memory
leak in the Exynos cpufreq driver.
Specifics:
- Fix a recently introduced issue in the ACPI backlight code which
causes lockdep to complain about a circular lock dependency during
initialization (Hans de Goede).
- Fix a possible memory during initialization in the Exynos cpufreq
driver (Shailendra Verma)"
* tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: exynos: Fix for memory leak in case SoC name does not match
ACPI / video: Fix circular lock dependency issue in the video-detect code
dabrace
pushed a commit
that referenced
this pull request
Dec 13, 2018
kmsan was able to trigger a kernel-infoleak using a gre device [1] nlmsg_populate_fdb_fill() has a hard coded assumption that dev->addr_len is ETH_ALEN, as normally guaranteed for ARPHRD_ETHER devices. A similar issue was fixed recently in commit da71577 ("rtnetlink: Disallow FDB configuration for non-Ethernet device") [1] BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:143 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576 CPU: 0 PID: 6697 Comm: syz-executor310 Not tainted 4.20.0-rc3+ #95 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x32d/0x480 lib/dump_stack.c:113 kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683 kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743 kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634 copyout lib/iov_iter.c:143 [inline] _copy_to_iter+0x4c0/0x2700 lib/iov_iter.c:576 copy_to_iter include/linux/uio.h:143 [inline] skb_copy_datagram_iter+0x4e2/0x1070 net/core/datagram.c:431 skb_copy_datagram_msg include/linux/skbuff.h:3316 [inline] netlink_recvmsg+0x6f9/0x19d0 net/netlink/af_netlink.c:1975 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg+0x1d1/0x230 net/socket.c:801 ___sys_recvmsg+0x444/0xae0 net/socket.c:2278 __sys_recvmsg net/socket.c:2327 [inline] __do_sys_recvmsg net/socket.c:2337 [inline] __se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334 __x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x441119 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db 0a fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffc7f008a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000441119 RDX: 0000000000000040 RSI: 00000000200005c0 RDI: 0000000000000003 RBP: 00000000006cc018 R08: 0000000000000100 R09: 0000000000000100 R10: 0000000000000100 R11: 0000000000000207 R12: 0000000000402080 R13: 0000000000402110 R14: 0000000000000000 R15: 0000000000000000 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline] kmsan_save_stack mm/kmsan/kmsan.c:261 [inline] kmsan_internal_chain_origin+0x13d/0x240 mm/kmsan/kmsan.c:469 kmsan_memcpy_memmove_metadata+0x1a9/0xf70 mm/kmsan/kmsan.c:344 kmsan_memcpy_metadata+0xb/0x10 mm/kmsan/kmsan.c:362 __msan_memcpy+0x61/0x70 mm/kmsan/kmsan_instr.c:162 __nla_put lib/nlattr.c:744 [inline] nla_put+0x20a/0x2d0 lib/nlattr.c:802 nlmsg_populate_fdb_fill+0x444/0x810 net/core/rtnetlink.c:3466 nlmsg_populate_fdb net/core/rtnetlink.c:3775 [inline] ndo_dflt_fdb_dump+0x73a/0x960 net/core/rtnetlink.c:3807 rtnl_fdb_dump+0x1318/0x1cb0 net/core/rtnetlink.c:3979 netlink_dump+0xc79/0x1c90 net/netlink/af_netlink.c:2244 __netlink_dump_start+0x10c4/0x11d0 net/netlink/af_netlink.c:2352 netlink_dump_start include/linux/netlink.h:216 [inline] rtnetlink_rcv_msg+0x141b/0x1540 net/core/rtnetlink.c:4910 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:246 [inline] kmsan_internal_poison_shadow+0x6d/0x130 mm/kmsan/kmsan.c:170 kmsan_kmalloc+0xa1/0x100 mm/kmsan/kmsan_hooks.c:186 __kmalloc+0x14c/0x4d0 mm/slub.c:3825 kmalloc include/linux/slab.h:551 [inline] __hw_addr_create_ex net/core/dev_addr_lists.c:34 [inline] __hw_addr_add_ex net/core/dev_addr_lists.c:80 [inline] __dev_mc_add+0x357/0x8a0 net/core/dev_addr_lists.c:670 dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687 ip_mc_filter_add net/ipv4/igmp.c:1128 [inline] igmp_group_added+0x4d4/0xb80 net/ipv4/igmp.c:1311 __ip_mc_inc_group+0xea9/0xf70 net/ipv4/igmp.c:1444 ip_mc_inc_group net/ipv4/igmp.c:1453 [inline] ip_mc_up+0x1c3/0x400 net/ipv4/igmp.c:1775 inetdev_event+0x1d03/0x1d80 net/ipv4/devinet.c:1522 notifier_call_chain kernel/notifier.c:93 [inline] __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x13d/0x240 kernel/notifier.c:401 __dev_notify_flags+0x3da/0x860 net/core/dev.c:1733 dev_change_flags+0x1ac/0x230 net/core/dev.c:7569 do_setlink+0x165f/0x5ea0 net/core/rtnetlink.c:2492 rtnl_newlink+0x2ad7/0x35a0 net/core/rtnetlink.c:3111 rtnetlink_rcv_msg+0x1148/0x1540 net/core/rtnetlink.c:4947 netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4965 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1699/0x1740 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x13c7/0x1440 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] ___sys_sendmsg+0xe3b/0x1240 net/socket.c:2116 __sys_sendmsg net/socket.c:2154 [inline] __do_sys_sendmsg net/socket.c:2163 [inline] __se_sys_sendmsg+0x305/0x460 net/socket.c:2161 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161 do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Bytes 36-37 of 105 are uninitialized Memory access of size 105 starts at ffff88819686c000 Data copied to user address 0000000020000380 Fixes: d83b060 ("net: add fdb generic dump routine") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Ido Schimmel <idosch@mellanox.com> Cc: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Mar 13, 2019
Fixes two typos in xsk_diag_put_umem() syzbot reported the following crash : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 7641 Comm: syz-executor946 Not tainted 5.0.0-rc7+ #95 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:xsk_diag_put_umem net/xdp/xsk_diag.c:71 [inline] RIP: 0010:xsk_diag_fill net/xdp/xsk_diag.c:113 [inline] RIP: 0010:xsk_diag_dump+0xdcb/0x13a0 net/xdp/xsk_diag.c:143 Code: 8d be c0 04 00 00 48 89 f8 48 c1 e8 03 42 80 3c 20 00 0f 85 39 04 00 00 49 8b 96 c0 04 00 00 48 8d 7a 14 48 89 f8 48 c1 e8 03 <42> 0f b6 0c 20 48 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RSP: 0018:ffff888090bcf2d8 EFLAGS: 00010203 RAX: 0000000000000002 RBX: ffff8880a0aacbc0 RCX: ffffffff86ffdc3c RDX: 0000000000000000 RSI: ffffffff86ffdc70 RDI: 0000000000000014 RBP: ffff888090bcf438 R08: ffff88808e04a700 R09: ffffed1011c74174 R10: ffffed1011c74173 R11: ffff88808e3a0b9f R12: dffffc0000000000 R13: ffff888093a6d818 R14: ffff88808e365240 R15: ffff88808e3a0b40 FS: 00000000011ea880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 000000008fa13000 CR4: 00000000001406e0 Call Trace: netlink_dump+0x55d/0xfb0 net/netlink/af_netlink.c:2252 __netlink_dump_start+0x5b4/0x7e0 net/netlink/af_netlink.c:2360 netlink_dump_start include/linux/netlink.h:226 [inline] xsk_diag_handler_dump+0x1b2/0x250 net/xdp/xsk_diag.c:170 __sock_diag_cmd net/core/sock_diag.c:232 [inline] sock_diag_rcv_msg+0x322/0x410 net/core/sock_diag.c:263 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485 sock_diag_rcv+0x2b/0x40 net/core/sock_diag.c:274 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:632 sock_write_iter+0x27c/0x3e0 net/socket.c:923 call_write_iter include/linux/fs.h:1863 [inline] do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680 do_iter_write fs/read_write.c:956 [inline] do_iter_write+0x184/0x610 fs/read_write.c:937 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001 do_writev+0xf6/0x290 fs/read_write.c:1036 __do_sys_writev fs/read_write.c:1109 [inline] __se_sys_writev fs/read_write.c:1106 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1106 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440139 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffcc966cc18 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440139 RDX: 0000000000000001 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000000000004 R11: 0000000000000246 R12: 00000000004019c0 R13: 0000000000401a50 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace 460a3c24d0a656c9 ]--- RIP: 0010:xsk_diag_put_umem net/xdp/xsk_diag.c:71 [inline] RIP: 0010:xsk_diag_fill net/xdp/xsk_diag.c:113 [inline] RIP: 0010:xsk_diag_dump+0xdcb/0x13a0 net/xdp/xsk_diag.c:143 Code: 8d be c0 04 00 00 48 89 f8 48 c1 e8 03 42 80 3c 20 00 0f 85 39 04 00 00 49 8b 96 c0 04 00 00 48 8d 7a 14 48 89 f8 48 c1 e8 03 <42> 0f b6 0c 20 48 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RSP: 0018:ffff888090bcf2d8 EFLAGS: 00010203 RAX: 0000000000000002 RBX: ffff8880a0aacbc0 RCX: ffffffff86ffdc3c RDX: 0000000000000000 RSI: ffffffff86ffdc70 RDI: 0000000000000014 RBP: ffff888090bcf438 R08: ffff88808e04a700 R09: ffffed1011c74174 R10: ffffed1011c74173 R11: ffff88808e3a0b9f R12: dffffc0000000000 R13: ffff888093a6d818 R14: ffff88808e365240 R15: ffff88808e3a0b40 FS: 00000000011ea880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001d22000 CR3: 000000008fa13000 CR4: 00000000001406f0 Fixes: a36b38a ("xsk: add sock_diag interface for AF_XDP") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
dabrace
pushed a commit
that referenced
this pull request
May 7, 2020
The mptcp_options_received structure carries several per packet flags (mp_capable, mp_join, etc.). Such fields must be cleared on each packet, even on dropped ones or packet not carrying any MPTCP options, but the current mptcp code clears them only on TCP option reset. On several races/corner cases we end-up with stray bits in incoming options, leading to WARN_ON splats. e.g.: [ 171.164906] Bad mapping: ssn=32714 map_seq=1 map_data_len=32713 [ 171.165006] WARNING: CPU: 1 PID: 5026 at net/mptcp/subflow.c:533 warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531) [ 171.167632] Modules linked in: ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel geneve ip6_udp_tunnel udp_tunnel macsec macvtap tap ipvlan macvlan 8021q garp mrp xfrm_interface veth netdevsim nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun binfmt_misc intel_rapl_msr intel_rapl_common rfkill kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel joydev virtio_balloon pcspkr i2c_piix4 sunrpc ip_tables xfs libcrc32c crc32c_intel serio_raw virtio_console ata_generic virtio_blk virtio_net net_failover failover ata_piix libata [ 171.199464] CPU: 1 PID: 5026 Comm: repro Not tainted 5.7.0-rc1.mptcp_f227fdf5d388+ #95 [ 171.200886] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 171.202546] RIP: 0010:warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531) [ 171.206537] Code: c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 1d 8b 55 3c 44 89 e6 48 c7 c7 20 51 13 95 e8 37 8b 22 fe <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 89 4c 24 04 e8 db d6 94 fe 8b 4c [ 171.220473] RSP: 0018:ffffc90000150560 EFLAGS: 00010282 [ 171.221639] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 171.223108] RDX: 0000000000000000 RSI: 0000000000000008 RDI: fffff5200002a09e [ 171.224388] RBP: ffff8880aa6e3c00 R08: 0000000000000001 R09: fffffbfff2ec9955 [ 171.225706] R10: ffffffff9764caa7 R11: fffffbfff2ec9954 R12: 0000000000007fca [ 171.227211] R13: ffff8881066f4a7f R14: ffff8880aa6e3c00 R15: 0000000000000020 [ 171.228460] FS: 00007f8623719740(0000) GS:ffff88810be00000(0000) knlGS:0000000000000000 [ 171.230065] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 171.231303] CR2: 00007ffdab190a50 CR3: 00000001038ea006 CR4: 0000000000160ee0 [ 171.232586] Call Trace: [ 171.233109] <IRQ> [ 171.233531] get_mapping_status (linux-mptcp/net/mptcp/subflow.c:691) [ 171.234371] mptcp_subflow_data_available (linux-mptcp/net/mptcp/subflow.c:736 linux-mptcp/net/mptcp/subflow.c:832) [ 171.238181] subflow_state_change (linux-mptcp/net/mptcp/subflow.c:1085 (discriminator 1)) [ 171.239066] tcp_fin (linux-mptcp/net/ipv4/tcp_input.c:4217) [ 171.240123] tcp_data_queue (linux-mptcp/./include/linux/compiler.h:199 linux-mptcp/net/ipv4/tcp_input.c:4822) [ 171.245083] tcp_rcv_established (linux-mptcp/./include/linux/skbuff.h:1785 linux-mptcp/./include/net/tcp.h:1774 linux-mptcp/./include/net/tcp.h:1847 linux-mptcp/net/ipv4/tcp_input.c:5238 linux-mptcp/net/ipv4/tcp_input.c:5730) [ 171.254089] tcp_v4_rcv (linux-mptcp/./include/linux/spinlock.h:393 linux-mptcp/net/ipv4/tcp_ipv4.c:2009) [ 171.258969] ip_protocol_deliver_rcu (linux-mptcp/net/ipv4/ip_input.c:204 (discriminator 1)) [ 171.260214] ip_local_deliver_finish (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/ipv4/ip_input.c:232) [ 171.261389] ip_local_deliver (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:252) [ 171.265884] ip_rcv (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:539) [ 171.273666] process_backlog (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/core/dev.c:6135) [ 171.275328] net_rx_action (linux-mptcp/net/core/dev.c:6572 linux-mptcp/net/core/dev.c:6640) [ 171.280472] __do_softirq (linux-mptcp/./arch/x86/include/asm/jump_label.h:25 linux-mptcp/./include/linux/jump_label.h:200 linux-mptcp/./include/trace/events/irq.h:142 linux-mptcp/kernel/softirq.c:293) [ 171.281379] do_softirq_own_stack (linux-mptcp/arch/x86/entry/entry_64.S:1083) [ 171.282358] </IRQ> We could address the issue clearing explicitly the relevant fields in several places - tcp_parse_option, tcp_fast_parse_options, possibly others. Instead we move the MPTCP option parsing into the already existing mptcp ingress hook, so that we need to clear the fields in a single place. This allows us dropping an MPTCP hook from the TCP code and removing the quite large mptcp_options_received from the tcp_sock struct. On the flip side, the MPTCP sockets will traverse the option space twice (in tcp_parse_option() and in mptcp_incoming_options(). That looks acceptable: we already do that for syn and 3rd ack packets, plain TCP socket will benefit from it, and even MPTCP sockets will experience better code locality, reducing the jumps between TCP and MPTCP code. v1 -> v2: - rebased on current '-net' tree Fixes: 648ef4b ("mptcp: Implement MPTCP receive path") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
dabrace
pushed a commit
that referenced
this pull request
Nov 10, 2020
The minimum reserve size was adjusted to take into account the height of the tree we are merging, however we can have a root with a level == 0. What we want is root_level + 1 to get the number of nodes we may have to cow. This fixes the enospc_debug warning pops with btrfs/101. Nikolay: this fixes failures on btrfs/060 btrfs/062 btrfs/063 and btrfs/195 That I was seeing, the call trace was: [ 3680.515564] ------------[ cut here ]------------ [ 3680.515566] BTRFS: block rsv returned -28 [ 3680.515585] WARNING: CPU: 2 PID: 8339 at fs/btrfs/block-rsv.c:521 btrfs_use_block_rsv+0x162/0x180 [ 3680.515587] Modules linked in: [ 3680.515591] CPU: 2 PID: 8339 Comm: btrfs Tainted: G W 5.9.0-rc8-default #95 [ 3680.515593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 3680.515595] RIP: 0010:btrfs_use_block_rsv+0x162/0x180 [ 3680.515600] RSP: 0018:ffffa01ac9753910 EFLAGS: 00010282 [ 3680.515602] RAX: 0000000000000000 RBX: ffff984b34200000 RCX: 0000000000000027 [ 3680.515604] RDX: 0000000000000027 RSI: 0000000000000000 RDI: ffff984b3bd19e28 [ 3680.515606] RBP: 0000000000004000 R08: ffff984b3bd19e20 R09: 0000000000000001 [ 3680.515608] R10: 0000000000000004 R11: 0000000000000046 R12: ffff984b264fdc00 [ 3680.515609] R13: ffff984b13149000 R14: 00000000ffffffe4 R15: ffff984b34200000 [ 3680.515613] FS: 00007f4e2912b8c0(0000) GS:ffff984b3bd00000(0000) knlGS:0000000000000000 [ 3680.515615] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3680.515617] CR2: 00007fab87122150 CR3: 0000000118e42000 CR4: 00000000000006e0 [ 3680.515620] Call Trace: [ 3680.515627] btrfs_alloc_tree_block+0x8b/0x340 [ 3680.515633] ? __lock_acquire+0x51a/0xac0 [ 3680.515646] alloc_tree_block_no_bg_flush+0x4f/0x60 [ 3680.515651] __btrfs_cow_block+0x14e/0x7e0 [ 3680.515662] btrfs_cow_block+0x144/0x2c0 [ 3680.515670] merge_reloc_root+0x4d4/0x610 [ 3680.515675] ? btrfs_lookup_fs_root+0x78/0x90 [ 3680.515686] merge_reloc_roots+0xee/0x280 [ 3680.515695] relocate_block_group+0x2ce/0x5e0 [ 3680.515704] btrfs_relocate_block_group+0x16e/0x310 [ 3680.515711] btrfs_relocate_chunk+0x38/0xf0 [ 3680.515716] btrfs_shrink_device+0x200/0x560 [ 3680.515728] btrfs_rm_device+0x1ae/0x6a6 [ 3680.515744] ? _copy_from_user+0x6e/0xb0 [ 3680.515750] btrfs_ioctl+0x1afe/0x28c0 [ 3680.515755] ? find_held_lock+0x2b/0x80 [ 3680.515760] ? do_user_addr_fault+0x1f8/0x418 [ 3680.515773] ? __x64_sys_ioctl+0x77/0xb0 [ 3680.515775] __x64_sys_ioctl+0x77/0xb0 [ 3680.515781] do_syscall_64+0x31/0x70 [ 3680.515785] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: Nikolay Borisov <nborisov@suse.com> Fixes: 44d354a ("btrfs: relocation: review the call sites which can be interrupted by signal") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Nikolay Borisov <nborisov@suse.com> Tested-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.