Cannot start container: no space left on device (cpuset cgroup) #133
Comments
|
I have this issue as well. The workaround is to run the following command before starting a Docker container: |
|
I think docker-archive/libcontainer#642 alread fixed it, you can try again after moby/moby#14693 is merged. |
|
Oh, I didn't see that PR. Pretty sure it fixes the problem. I'll try again when libcontainer is updated and reopen if I still have problems. Thanks! |
|
In the process of testing a backport of docker-archive/libcontainer#642 into docker 1.7.1 it seems the problem is not fully solved for me. If I reproduce the issue with a version of docker that includes the fix, docker will produce the same error. If I run docker again, the issue is then resolved until the next restart of the machine. I've found that both 1.7.1 (with backported fix) and 1.8.0-rc1 will behave identically in this regard. |
|
http://permalink.gmane.org/gmane.linux.kernel.cgroups/13990
Merged in mainline: torvalds/linux@24ee3cf |
danilocesar
pushed a commit
to danilocesar/linux
that referenced
this issue
Aug 21, 2015
The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
|
A |
|
@pbx0 Is this problem still existed? Can you show the steps how you reproduce the issue? |
|
@alban 's patch did fix the kernel bug in 3.17+, @pbx0 if you are using kernel newer than 3.17, probably should merge that kernel fix and try again. |
|
@hqhq I can confirm alban's kernel patch fixed it for me. Forgot to come back here and say so. |
Whissi
pushed a commit
to Whissi/linux-stable
that referenced
this issue
Sep 13, 2015
commit 24ee3cf upstream. The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
I'll close this one since you reported back the kernel update fixed it for you. Thanks! |
Whissi
pushed a commit
to Whissi/linux-stable
that referenced
this issue
Oct 3, 2015
[ Upstream commit 24ee3cf ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
|
|
|
Unfortunately, problem is still present (Debian wheezy, kernel 3.16.0-0.bpo.4-amd64, Docker 1.9.1) |
|
@truebit in my case, Wheezy, kernel 3.16.0-0.bpo.4-amd64, Docker 1.9.1, just like @romuald's your fix doesn't do the trick. You're running Docker 1.8.3 though. $ cat /sys/fs/cgroup/docker/cgroup.clone_children
1I have stop/start docker and I am trying to run a (progrium/consul)[https://hub.docker.com/r/progrium/consul/] container fails with the following: 95003f34b7dba95e6dd63a96774ee3505027bb34529dfc7a22999b3d93c57779
Error response from daemon: Cannot start container 95003f34b7dba95e6dd63a96774ee3505027bb34529dfc7a22999b3d93c57779: [8] System error: write /sys/fs/cgroup/docker/95003f34b7dba95e6dd63a96774ee3505027bb34529dfc7a22999b3d93c57779/cgroup.procs: no space left on device@romuald have you found any fix for this? Thanks :). |
|
There's something wrong with the node in question. On another Wheezy/Docker 1.9.1 works. My node needs a restart. |
msdx321
added a commit
to msdx321/android_kernel_samsung_heroXqltechn
that referenced
this issue
Jun 16, 2016
x86/xen: Initialize cr4 shadow for 64-bit PV(H) guests
[ Upstream commit 5054daa285beaf706f051fbd395dc36c9f0f907f ]
Commit 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4")
introduced CR4 shadows.
These shadows are initialized in early boot code. The commit missed
initialization for 64-bit PV(H) guests that this patch adds.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ipc,sem: fix use after free on IPC_RMID after a task using same semaphore set exits
[ Upstream commit 602b8593d2b4138c10e922eeaafe306f6b51817b ]
The current semaphore code allows a potential use after free: in
exit_sem we may free the task's sem_undo_list while there is still
another task looping through the same semaphore set and cleaning the
sem_undo list at freeary function (the task called IPC_RMID for the same
semaphore set).
For example, with a test program [1] running which keeps forking a lot
of processes (which then do a semop call with SEM_UNDO flag), and with
the parent right after removing the semaphore set with IPC_RMID, and a
kernel built with CONFIG_SLAB, CONFIG_SLAB_DEBUG and
CONFIG_DEBUG_SPINLOCK, you can easily see something like the following
in the kernel log:
Slab corruption (Not tainted): kmalloc-64 start=ffff88003b45c1c0, len=64
000: 6b 6b 6b 6b 6b 6b 6b 6b 00 6b 6b 6b 6b 6b 6b 6b kkkkkkkk.kkkkkkk
010: ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........
Prev obj: start=ffff88003b45c180, len=64
000: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a .....N......ZZZZ
010: ff ff ff ff ff ff ff ff c0 fb 01 37 00 88 ff ff ...........7....
Next obj: start=ffff88003b45c200, len=64
000: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a .....N......ZZZZ
010: ff ff ff ff ff ff ff ff 68 29 a7 3c 00 88 ff ff ........h).<....
BUG: spinlock wrong CPU on CPU#2, test/18028
general protection fault: 0000 [#1] SMP
Modules linked in: 8021q mrp garp stp llc nf_conntrack_ipv4 nf_defrag_ipv4 ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc ppdev input_leds joydev parport_pc parport floppy serio_raw virtio_balloon virtio_rng virtio_console virtio_net iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcspkr qxl ttm drm_kms_helper drm snd_hda_codec_generic i2c_piix4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore crc32c_intel virtio_pci virtio_ring virtio pata_acpi ata_generic [last unloaded: speedstep_lib]
CPU: 2 PID: 18028 Comm: test Not tainted 4.2.0-rc5+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014
RIP: spin_dump+0x53/0xc0
Call Trace:
spin_bug+0x30/0x40
do_raw_spin_unlock+0x71/0xa0
_raw_spin_unlock+0xe/0x10
freeary+0x82/0x2a0
? _raw_spin_lock+0xe/0x10
semctl_down.clone.0+0xce/0x160
? __do_page_fault+0x19a/0x430
? __audit_syscall_entry+0xa8/0x100
SyS_semctl+0x236/0x2c0
? syscall_trace_leave+0xde/0x130
entry_SYSCALL_64_fastpath+0x12/0x71
Code: 8b 80 88 03 00 00 48 8d 88 60 05 00 00 48 c7 c7 a0 2c a4 81 31 c0 65 8b 15 eb 40 f3 7e e8 08 31 68 00 4d 85 e4 44 8b 4b 08 74 5e <45> 8b 84 24 88 03 00 00 49 8d 8c 24 60 05 00 00 8b 53 04 48 89
RIP [<ffffffff810d6053>] spin_dump+0x53/0xc0
RSP <ffff88003750fd68>
---[ end trace 783ebb76612867a0 ]---
NMI watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [test:18053]
Modules linked in: 8021q mrp garp stp llc nf_conntrack_ipv4 nf_defrag_ipv4 ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc ppdev input_leds joydev parport_pc parport floppy serio_raw virtio_balloon virtio_rng virtio_console virtio_net iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcspkr qxl ttm drm_kms_helper drm snd_hda_codec_generic i2c_piix4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore crc32c_intel virtio_pci virtio_ring virtio pata_acpi ata_generic [last unloaded: speedstep_lib]
CPU: 3 PID: 18053 Comm: test Tainted: G D 4.2.0-rc5+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014
RIP: native_read_tsc+0x0/0x20
Call Trace:
? delay_tsc+0x40/0x70
__delay+0xf/0x20
do_raw_spin_lock+0x96/0x140
_raw_spin_lock+0xe/0x10
sem_lock_and_putref+0x11/0x70
SYSC_semtimedop+0x7bf/0x960
? handle_mm_fault+0xbf6/0x1880
? dequeue_task_fair+0x79/0x4a0
? __do_page_fault+0x19a/0x430
? kfree_debugcheck+0x16/0x40
? __do_page_fault+0x19a/0x430
? __audit_syscall_entry+0xa8/0x100
? do_audit_syscall_entry+0x66/0x70
? syscall_trace_enter_phase1+0x139/0x160
SyS_semtimedop+0xe/0x10
SyS_semop+0x10/0x20
entry_SYSCALL_64_fastpath+0x12/0x71
Code: 47 10 83 e8 01 85 c0 89 47 10 75 08 65 48 89 3d 1f 74 ff 7e c9 c3 0f 1f 44 00 00 55 48 89 e5 e8 87 17 04 00 66 90 c9 c3 0f 1f 00 <55> 48 89 e5 0f 31 89 c1 48 89 d0 48 c1 e0 20 89 c9 48 09 c8 c9
Kernel panic - not syncing: softlockup: hung tasks
I wasn't able to trigger any badness on a recent kernel without the
proper config debugs enabled, however I have softlockup reports on some
kernel versions, in the semaphore code, which are similar as above (the
scenario is seen on some servers running IBM DB2 which uses semaphore
syscalls).
The patch here fixes the race against freeary, by acquiring or waiting
on the sem_undo_list lock as necessary (exit_sem can race with freeary,
while freeary sets un->semid to -1 and removes the same sem_undo from
list_proc or when it removes the last sem_undo).
After the patch I'm unable to reproduce the problem using the test case
[1].
[1] Test case used below:
#include <stdio.h>
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/sem.h>
#include <sys/wait.h>
#include <stdlib.h>
#include <time.h>
#include <unistd.h>
#include <errno.h>
#define NSEM 1
#define NSET 5
int sid[NSET];
void thread()
{
struct sembuf op;
int s;
uid_t pid = getuid();
s = rand() % NSET;
op.sem_num = pid % NSEM;
op.sem_op = 1;
op.sem_flg = SEM_UNDO;
semop(sid[s], &op, 1);
exit(EXIT_SUCCESS);
}
void create_set()
{
int i, j;
pid_t p;
union {
int val;
struct semid_ds *buf;
unsigned short int *array;
struct seminfo *__buf;
} un;
/* Create and initialize semaphore set */
for (i = 0; i < NSET; i++) {
sid[i] = semget(IPC_PRIVATE , NSEM, 0644 | IPC_CREAT);
if (sid[i] < 0) {
perror("semget");
exit(EXIT_FAILURE);
}
}
un.val = 0;
for (i = 0; i < NSET; i++) {
for (j = 0; j < NSEM; j++) {
if (semctl(sid[i], j, SETVAL, un) < 0)
perror("semctl");
}
}
/* Launch threads that operate on semaphore set */
for (i = 0; i < NSEM * NSET * NSET; i++) {
p = fork();
if (p < 0)
perror("fork");
if (p == 0)
thread();
}
/* Free semaphore set */
for (i = 0; i < NSET; i++) {
if (semctl(sid[i], NSEM, IPC_RMID))
perror("IPC_RMID");
}
/* Wait for forked processes to exit */
while (wait(NULL)) {
if (errno == ECHILD)
break;
};
}
int main(int argc, char **argv)
{
pid_t p;
srand(time(NULL));
while (1) {
p = fork();
if (p < 0) {
perror("fork");
exit(EXIT_FAILURE);
}
if (p == 0) {
create_set();
goto end;
}
/* Wait for forked processes to exit */
while (wait(NULL)) {
if (errno == ECHILD)
break;
};
}
end:
return 0;
}
[akpm@linux-foundation.org: use normal comment layout]
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Rafael Aquini <aquini@redhat.com>
CC: Aristeu Rozanski <aris@redhat.com>
Cc: David Jeffery <djeffery@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ipc/sem.c: update/correct memory barriers
[ Upstream commit 3ed1f8a99d70ea1cd1508910eb107d0edcae5009 ]
sem_lock() did not properly pair memory barriers:
!spin_is_locked() and spin_unlock_wait() are both only control barriers.
The code needs an acquire barrier, otherwise the cpu might perform read
operations before the lock test.
As no primitive exists inside <include/spinlock.h> and since it seems
noone wants another primitive, the code creates a local primitive within
ipc/sem.c.
With regards to -stable:
The change of sem_wait_array() is a bugfix, the change to sem_lock() is a
nop (just a preprocessor redefinition to improve the readability). The
bugfix is necessary for all kernels that use sem_wait_array() (i.e.:
starting from 3.10).
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org> [3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
mm/hwpoison: fix page refcount of unknown non LRU page
[ Upstream commit 4f32be677b124a49459e2603321c7a5605ceb9f8 ]
After trying to drain pages from pagevec/pageset, we try to get reference
count of the page again, however, the reference count of the page is not
reduced if the page is still not on LRU list.
Fix it by adding the put_page() to drop the page reference which is from
__get_any_page().
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org> [3.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
mm: hugetlb: introduce page_huge_active
[ Upstream commit bcc54222309c70ebcb6c69c156fba4a13dee0a3b ]
We are not safe from calling isolate_huge_page() on a hugepage
concurrently, which can make the victim hugepage in invalid state and
results in BUG_ON().
The root problem of this is that we don't have any information on struct
page (so easily accessible) about hugepages' activeness. Note that
hugepages' activeness means just being linked to
hstate->hugepage_activelist, which is not the same as normal pages'
activeness represented by PageActive flag.
Normal pages are isolated by isolate_lru_page() which prechecks PageLRU
before isolation, so let's do similarly for hugetlb with a new
paeg_huge_active().
set/clear_page_huge_active() should be called within hugetlb_lock. But
hugetlb_cow() and hugetlb_no_page() don't do this, being justified because
in these functions set_page_huge_active() is called right after the
hugepage is allocated and no other thread tries to isolate it.
[akpm@linux-foundation.org: s/PageHugeActive/page_huge_active/, make it return bool]
[fengguang.wu@intel.com: set_page_huge_active() can be static]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
mm/hwpoison: fix fail isolate hugetlbfs page w/ refcount held
[ Upstream commit 036138080a4376e5f3e5d0cca8ac99084c5cf06e ]
Hugetlbfs pages will get a refcount in get_any_page() or
madvise_hwpoison() if soft offlining through madvise. The refcount which
is held by the soft offline path should be released if we fail to isolate
hugetlbfs pages.
Fix it by reducing the refcount for both isolation success and failure.
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org> [3.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
xen-blkfront: don't add indirect pages to list when !feature_persistent
[ Upstream commit 7b0767502b5db11cb1f0daef2d01f6d71b1192dc ]
We should consider info->feature_persistent when adding indirect page to list
info->indirect_pages, else the BUG_ON() in blkif_free() would be triggered.
When we are using persistent grants the indirect_pages list
should always be empty because blkfront has pre-allocated enough
persistent pages to fill all requests on the ring.
CC: stable@vger.kernel.org
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
xen-blkback: replace work_pending with work_busy in purge_persistent_gnt()
[ Upstream commit 53bc7dc004fecf39e0ba70f2f8d120a1444315d3 ]
The BUG_ON() in purge_persistent_gnt() will be triggered when previous purge
work haven't finished.
There is a work_pending() before this BUG_ON, but it doesn't account if the work
is still currently running.
CC: stable@vger.kernel.org
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
perf: Fix fasync handling on inherited events
[ Upstream commit fed66e2cdd4f127a43fd11b8d92a99bdd429528c ]
Vince reported that the fasync signal stuff doesn't work proper for
inherited events. So fix that.
Installing fasync allocates memory and sets filp->f_flags |= FASYNC,
which upon the demise of the file descriptor ensures the allocation is
freed and state is updated.
Now for perf, we can have the events stick around for a while after the
original FD is dead because of references from child events. So we
cannot copy the fasync pointer around. We can however consistently use
the parent's fasync, as that will be updated.
Reported-and-Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Arnaldo Carvalho deMelo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1434011521.1495.71.camel@twins
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
perf: Fix PERF_EVENT_IOC_PERIOD migration race
[ Upstream commit c7999c6f3fed9e383d3131474588f282ae6d56b9 ]
I ran the perf fuzzer, which triggered some WARN()s which are due to
trying to stop/restart an event on the wrong CPU.
Use the normal IPI pattern to ensure we run the code on the correct CPU.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: bad7192b842c ("perf: Fix PERF_EVENT_IOC_PERIOD to force-reset the period")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
rtlwifi: rtl8723be: Add module parameter for MSI interrupts
[ Upstream commit 741e3b9902d11585e18bfc7f8d47e913616bb070 ]
The driver code allows for the disabling of MSI interrupts; however the
module_parm line was missed and the option fails to show with modinfo.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [3.15+]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
x86/xen: build "Xen PV" APIC driver for domU as well
[ Upstream commit fc5fee86bdd3d720e2d1d324e4fae0c35845fa63 ]
It turns out that a PV domU also requires the "Xen PV" APIC
driver. Otherwise, the flat driver is used and we get stuck in busy
loops that never exit, such as in this stack trace:
(gdb) target remote localhost:9999
Remote debugging using localhost:9999
__xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56
56 while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY)
(gdb) bt
#0 __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56
#1 __default_send_IPI_shortcut (shortcut=<optimized out>,
dest=<optimized out>, vector=<optimized out>) at
./arch/x86/include/asm/ipi.h:75
#2 apic_send_IPI_self (vector=246) at arch/x86/kernel/apic/probe_64.c:54
#3 0xffffffff81011336 in arch_irq_work_raise () at
arch/x86/kernel/irq_work.c:47
#4 0xffffffff8114990c in irq_work_queue (work=0xffff88000fc0e400) at
kernel/irq_work.c:100
#5 0xffffffff8110c29d in wake_up_klogd () at kernel/printk/printk.c:2633
#6 0xffffffff8110ca60 in vprintk_emit (facility=0, level=<optimized
out>, dict=0x0 <irq_stack_union>, dictlen=<optimized out>,
fmt=<optimized out>, args=<optimized out>)
at kernel/printk/printk.c:1778
#7 0xffffffff816010c8 in printk (fmt=<optimized out>) at
kernel/printk/printk.c:1868
#8 0xffffffffc00013ea in ?? ()
#9 0x0000000000000000 in ?? ()
Mailing-list-thread: https://lkml.org/lkml/2015/8/4/755
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
dm thin metadata: delete btrees when releasing metadata snapshot
[ Upstream commit 7f518ad0a212e2a6fd68630e176af1de395070a7 ]
The device details and mapping trees were just being decremented
before. Now btree_del() is called to do a deep delete.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
localmodconfig: Use Kbuild files too
[ Upstream commit c0ddc8c745b7f89c50385fd7aa03c78dc543fa7a ]
In kbuild it is allowed to define objects in files named "Makefile"
and "Kbuild".
Currently localmodconfig reads objects only from "Makefile"s and misses
modules like nouveau.
Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at
Cc: stable@vger.kernel.org
Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
EDAC, ppc4xx: Access mci->csrows array elements properly
[ Upstream commit 5c16179b550b9fd8114637a56b153c9768ea06a5 ]
The commit
de3910eb79ac ("edac: change the mem allocation scheme to
make Documentation/kobject.txt happy")
changed the memory allocation for the csrows member. But ppc4xx_edac was
forgotten in the patch. Fix it.
Signed-off-by: Michael Walle <michael@walle.cc>
Cc: <stable@vger.kernel.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.cc
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
drm/radeon: add new OLAND pci id
[ Upstream commit e037239e5e7b61007763984aa35a8329596d8c88 ]
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
drm/vmwgfx: Fix execbuf locking issues
[ Upstream commit 3e04e2fe6d87807d27521ad6ebb9e7919d628f25 ]
This addresses two issues that cause problems with viewperf maya-03 in
situation with memory pressure.
The first issue causes attempts to unreserve buffers if batched
reservation fails due to, for example, a signal pending. While previously
the ttm_eu api was resistant against this type of error, it is no longer
and the lockdep code will complain about attempting to unreserve buffers
that are not reserved. The issue is resolved by avoid calling
ttm_eu_backoff_reservation in the buffer reserve error path.
The second issue is that the binding_mutex may be held when user-space
fence objects are created and hence during memory reclaims. This may cause
recursive attempts to grab the binding mutex. The issue is resolved by not
holding the binding mutex across fence creation and submission.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
libfc: Fix fc_exch_recv_req() error path
[ Upstream commit f6979adeaab578f8ca14fdd32b06ddee0d9d3314 ]
Due to patch "libfc: Do not invoke the response handler after
fc_exch_done()" (commit ID 7030fd62) the lport_recv() call
in fc_exch_recv_req() is passed a dangling pointer. Avoid this
by moving the fc_frame_free() call from fc_invoke_resp() to its
callers. This patch fixes the following crash:
general protection fault: 0000 [#3] PREEMPT SMP
RIP: fc_lport_recv_req+0x72/0x280 [libfc]
Call Trace:
fc_exch_recv+0x642/0xde0 [libfc]
fcoe_percpu_receive_thread+0x46a/0x5ed [fcoe]
kthread+0x10a/0x120
ret_from_fork+0x42/0x70
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
libfc: Fix fc_fcp_cleanup_each_cmd()
[ Upstream commit 8f2777f53e3d5ad8ef2a176a4463a5c8e1a16431 ]
Since fc_fcp_cleanup_cmd() can sleep this function must not
be called while holding a spinlock. This patch avoids that
fc_fcp_cleanup_each_cmd() triggers the following bug:
BUG: scheduling while atomic: sg_reset/1512/0x00000202
1 lock held by sg_reset/1512:
#0: (&(&fsp->scsi_pkt_lock)->rlock){+.-...}, at: [<ffffffffc0225cd5>] fc_fcp_cleanup_each_cmd.isra.21+0xa5/0x150 [libfc]
Preemption disabled at:[<ffffffffc0225cd5>] fc_fcp_cleanup_each_cmd.isra.21+0xa5/0x150 [libfc]
Call Trace:
[<ffffffff816c612c>] dump_stack+0x4f/0x7b
[<ffffffff810828bc>] __schedule_bug+0x6c/0xd0
[<ffffffff816c87aa>] __schedule+0x71a/0xa10
[<ffffffff816c8ad2>] schedule+0x32/0x80
[<ffffffffc0217eac>] fc_seq_set_resp+0xac/0x100 [libfc]
[<ffffffffc0218b11>] fc_exch_done+0x41/0x60 [libfc]
[<ffffffffc0225cff>] fc_fcp_cleanup_each_cmd.isra.21+0xcf/0x150 [libfc]
[<ffffffffc0225f43>] fc_eh_device_reset+0x1c3/0x270 [libfc]
[<ffffffff814a2cc9>] scsi_try_bus_device_reset+0x29/0x60
[<ffffffff814a3908>] scsi_ioctl_reset+0x258/0x2d0
[<ffffffff814a2650>] scsi_ioctl+0x150/0x440
[<ffffffff814b3a9d>] sd_ioctl+0xad/0x120
[<ffffffff8132f266>] blkdev_ioctl+0x1b6/0x810
[<ffffffff811da608>] block_ioctl+0x38/0x40
[<ffffffff811b4e08>] do_vfs_ioctl+0x2f8/0x530
[<ffffffff811b50c1>] SyS_ioctl+0x81/0xa0
[<ffffffff816cf8b2>] system_call_fastpath+0x16/0x7a
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
mfd: arizona: Fix initialisation of the PM runtime
[ Upstream commit 72e43164fd472f6c2659c8313b87da962322dbcf ]
The PM runtime core by default assumes a chip is suspended when runtime
PM is enabled. Currently the arizona driver enables runtime PM when the
chip is fully active and then disables the DCVDD regulator at the end of
arizona_dev_init. This however has several problems, firstly the if we
reach the end of arizona_dev_init, we did not properly follow all the
proceedures for shutting down the chip, and most notably we never marked
the chip as cache only so any writes occurring between then and the next
PM runtime resume will be lost. Secondly, if we are already resumed when
we reach the end of dev_init, then at best we get unbalanced regulator
enable/disables at work we lose DCVDD whilst we need it.
Additionally, since the commit 4f0216409f7c ("mfd: arizona: Add better
support for system suspend"), the PM runtime operations may
disable/enable the IRQ, so the IRQs must now be enabled before we call
any PM operations.
This patch adds a call to pm_runtime_set_active to inform the PM core
that the device is starting up active and moves the PM enabling to
around the IRQ initialisation to avoid any PM callbacks happening until
the IRQs are initialised.
Cc: stable@vger.kernel.org # v3.5+
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
regmap: regcache-rbtree: Clean new present bits on present bitmap resize
[ Upstream commit 8ef9724bf9718af81cfc5132253372f79c71b7e2 ]
When inserting a new register into a block, the present bit map size is
increased using krealloc. krealloc does not clear the additionally
allocated memory, leaving it filled with random values. Result is that
some registers are considered cached even though this is not the case.
Fix the problem by clearing the additionally allocated memory. Also, if
the bitmap size does not increase, do not reallocate the bitmap at all
to reduce overhead.
Fixes: 3f4ff561bc88 ("regmap: rbtree: Make cache_present bitmap per node")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
MIPS: Fix seccomp syscall argument for MIPS64
[ Upstream commit 9f161439e4104b641a7bfb9b89581d801159fec8 ]
Commit 4c21b8fd8f14 ("MIPS: seccomp: Handle indirect system calls (o32)")
fixed indirect system calls on O32 but it also introduced a bug for MIPS64
where it erroneously modified the v0 (syscall) register with the assumption
that the sycall offset hasn't been taken into consideration. This breaks
seccomp on MIPS64 n64 and n32 ABIs. We fix this by replacing the addition
with a move instruction.
Fixes: 4c21b8fd8f14 ("MIPS: seccomp: Handle indirect system calls (o32)")
Cc: <stable@vger.kernel.org> # 3.15+
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10951/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
libiscsi: Fix host busy blocking during connection teardown
[ Upstream commit 660d0831d1494a6837b2f810d08b5be092c1f31d ]
In case of hw iscsi offload, an host can have N-number of active
connections. There can be IO's running on some connections which
make host->host_busy always TRUE. Now if logout from a connection
is tried then the code gets into an infinite loop as host->host_busy
is always TRUE.
iscsi_conn_teardown(....)
{
.........
/*
* Block until all in-progress commands for this connection
* time out or fail.
*/
for (;;) {
spin_lock_irqsave(session->host->host_lock, flags);
if (!atomic_read(&session->host->host_busy)) { /* OK for ERL == 0 */
spin_unlock_irqrestore(session->host->host_lock, flags);
break;
}
spin_unlock_irqrestore(session->host->host_lock, flags);
msleep_interruptible(500);
iscsi_conn_printk(KERN_INFO, conn, "iscsi conn_destroy(): "
"host_busy %d host_failed %d\n",
atomic_read(&session->host->host_busy),
session->host->host_failed);
................
...............
}
}
This is not an issue with software-iscsi/iser as each cxn is a separate
host.
Fix:
Acquiring eh_mutex in iscsi_conn_teardown() before setting
session->state = ISCSI_STATE_TERMINATE.
Signed-off-by: John Soni Jose <sony.john@avagotech.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Chris Leech <cleech@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
sd: Fix maximum I/O size for BLOCK_PC requests
[ Upstream commit 4f258a46346c03fa0bbb6199ffaf4e1f9f599660 ]
Commit bcdb247c6b6a ("sd: Limit transfer length") clamped the maximum
size of an I/O request to the MAXIMUM TRANSFER LENGTH field in the BLOCK
LIMITS VPD. This had the unfortunate effect of also limiting the maximum
size of non-filesystem requests sent to the device through sg/bsg.
Avoid using blk_queue_max_hw_sectors() and set the max_sectors queue
limit directly.
Also update the comment in blk_limits_max_hw_sectors() to clarify that
max_hw_sectors defines the limit for the I/O controller only.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Brian King <brking@linux.vnet.ibm.com>
Tested-by: Brian King <brking@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
crypto: caam - fix memory corruption in ahash_final_ctx
[ Upstream commit b310c178e6d897f82abb9da3af1cd7c02b09f592 ]
When doing pointer operation for accessing the HW S/G table,
a value representing number of entries (and not number of bytes)
must be used.
Cc: <stable@vger.kernel.org> # 3.6+
Fixes: 045e36780f115 ("crypto: caam - ahash hmac support")
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
cpuset: use trialcs->mems_allowed as a temp variable
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ]
The comment says it's using trialcs->mems_allowed as a temp variable but
it didn't match the code. Change the code to match the comment.
This fixes an issue when writing in cpuset.mems when a sub-directory
exists: we need to write several times for the information to persist:
| root@alban:/sys/fs/cgroup/cpuset# mkdir footest9
| root@alban:/sys/fs/cgroup/cpuset# cd footest9
| root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa
| root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems
|
| root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems
| root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems
|
| root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems
| root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems
| 0
| root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems
|
| root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems
| root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems
| 0
| root@alban:/sys/fs/cgroup/cpuset/footest9#
This should help to fix the following issue in Docker:
https://github.com/opencontainers/runc/issues/133
In some conditions, a Docker container needs to be started twice in
order to work.
Signed-off-by: Alban Crequy <alban@endocode.com>
Tested-by: Iago López Galeiras <iago@endocode.com>
Cc: <stable@vger.kernel.org> # 3.17+
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Add factory recertified Crucial M500s to blacklist
[ Upstream commit 7a7184b01aa9deb86df661c6f7cbcf69a95b728c ]
The Crucial M500 is known to have issues with queued TRIM commands, the
factory recertified SSDs use a different model number naming convention
which causes them to get ignored by the blacklist.
The new naming convention boils down to: s/Crucial_/FC/
Signed-off-by: Guillermo A. Amaral <g@maral.me>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
arm64: KVM: Fix host crash when injecting a fault into a 32bit guest
[ Upstream commit 126c69a0bd0e441bf6766a5d9bf20de011be9f68 ]
When injecting a fault into a misbehaving 32bit guest, it seems
rather idiotic to also inject a 64bit fault that is only going
to corrupt the guest state. This leads to a situation where we
perform an illegal exception return at EL2 causing the host
to crash instead of killing the guest.
Just fix the stupid bug that has been there from day 1.
Cc: <stable@vger.kernel.org>
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
x86/xen: make CONFIG_XEN depend on CONFIG_X86_LOCAL_APIC
[ Upstream commit 87ffd2b9bb74061c120f450e4d0f3409bb603ae0 ]
Since commit feb44f1f7a4ac299d1ab1c3606860e70b9b89d69 (x86/xen:
Provide a "Xen PV" APIC driver to support >255 VCPUs) Xen guests need
a full APIC driver and thus should depend on X86_LOCAL_APIC.
This fixes an i386 build failure with !SMP && !CONFIG_X86_UP_APIC by
disabling Xen support in this configuration.
Users needing Xen support in a non-SMP i386 kernel will need to enable
CONFIG_X86_UP_APIC.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ALSA: usb: Add native DSD support for Gustard DAC-X20U
[ Upstream commit 9544f8b6e2ee9ed02d2322ff018837b185f51d45 ]
This patch adds native DSD support for the Gustard DAC-X20U.
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
SCSI: Fix NULL pointer dereference in runtime PM
[ Upstream commit 49718f0fb8c9af192b33d8af3a2826db04025371 ]
The routines in scsi_rpm.c assume that if a runtime-PM callback is
invoked for a SCSI device, it can only mean that the device's driver
has asked the block layer to handle the runtime power management (by
calling blk_pm_runtime_init(), which among other things sets q->dev).
However, this assumption turns out to be wrong for things like the ses
driver. Normally ses devices are not allowed to do runtime PM, but
userspace can override this setting. If this happens, the kernel gets
a NULL pointer dereference when blk_post_runtime_resume() tries to use
the uninitialized q->dev pointer.
This patch fixes the problem by calling the block layer's runtime-PM
routines only if the device's driver really does have a runtime-PM
callback routine. Since ses doesn't define any such callbacks, the
crash won't occur.
This fixes Bugzilla #101371.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Stanisław Pitucha <viraptor@gmail.com>
Reported-by: Ilan Cohen <ilanco@gmail.com>
Tested-by: Ilan Cohen <ilanco@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
HID: usbhid: add Chicony/Pixart usb optical mouse that needs QUIRK_ALWAYS_POLL
[ Upstream commit 7250dc3fee806eb2b7560ab7d6072302e7ae8cf8 ]
I received a report from an user of following mouse which needs this quirk:
usb 1-1.6: USB disconnect, device number 58
usb 1-1.6: new low speed USB device number 59 using ehci_hcd
usb 1-1.6: New USB device found, idVendor=04f2, idProduct=1053
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: USB Optical Mouse
usb 1-1.6: Manufacturer: PixArt
usb 1-1.6: configuration #1 chosen from 1 choice
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input5887
generic-usb 0003:04F2:1053.16FE: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.0-1.6/input0
The quirk was tested by the reporter and it fixed the frequent disconnections etc.
[jkosina@suse.cz: reorder the position in hid-ids.h]
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
x86/nmi: Enable nested do_nmi() handling for 64-bit kernels
[ Upstream commit 9d05041679904b12c12421cbcf9cb5f4860a8d7b ]
32-bit kernels handle nested NMIs in C. Enable the exact same
handling on 64-bit kernels as well. This isn't currently
necessary, but it will become necessary once the asm code starts
allowing limited nesting.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
x86/nmi/64: Remove asm code that saves CR2
[ Upstream commit 0e181bb58143cb4a2e8f01c281b0816cd0e4798e ]
Now that do_nmi saves CR2, we don't need to save it in asm.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
x86/nmi/64: Switch stacks on userspace NMI entry
[ Upstream commit 9b6e6a8334d56354853f9c255d1395c2ba570e0a ]
Returning to userspace is tricky: IRET can fail, and ESPFIX can
rearrange the stack prior to IRET.
The NMI nesting fixup relies on a precise stack layout and
atomic IRET. Rather than trying to teach the NMI nesting fixup
to handle ESPFIX and failed IRET, punt: run NMIs that came from
user mode on the normal kernel stack.
This will make some nested NMIs visible to C code, but the C
code is okay with that.
As a side effect, this should speed up perf: it eliminates an
RDMSR when NMIs come from user mode.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
rcu: Move lockless_dereference() out of rcupdate.h
[ Upstream commit 0a04b0166929405cd833c1cc40f99e862b965ddc ]
I want to use lockless_dereference() from seqlock.h, which would mean
including rcupdate.h from it, however rcupdate.h already includes
seqlock.h.
Avoid this by moving lockless_dereference() into compiler.h. This is
somewhat tricky since it uses smp_read_barrier_depends() which isn't
available there, but its a CPP macro so we can get away with it.
The alternative would be moving it into asm/barrier.h, but that would
be updating each arch (I can do if people feel that is more
appropriate).
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
x86/ldt: Make modify_ldt synchronous
[ Upstream commit 37868fe113ff2ba814b3b4eb12df214df555f8dc ]
modify_ldt() has questionable locking and does not synchronize
threads. Improve it: redesign the locking and synchronize all
threads' LDTs using an IPI on all modifications.
This will dramatically slow down modify_ldt in multithreaded
programs, but there shouldn't be any multithreaded programs that
care about modify_ldt's performance in the first place.
This fixes some fallout from the CVE-2015-5157 fixes.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: security@kernel.org <security@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: xen-devel <xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/4c6978476782160600471bd865b318db34c7b628.1438291540.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
x86/ldt: Correct LDT access in single stepping logic
[ Upstream commit 136d9d83c07c5e30ac49fc83b27e8c4842f108fc ]
Commit 37868fe113ff ("x86/ldt: Make modify_ldt synchronous")
introduced a new struct ldt_struct anchored at mm->context.ldt.
convert_ip_to_linear() was changed to reflect this, but indexing
into the ldt has to be changed as the pointer is no longer void *.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: <stable@vger.kernel.org> # On top of: 37868fe113ff: x86/ldt: Make modify_ldt synchronous
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Link: http://lkml.kernel.org/r/1438848278-12906-1-git-send-email-jgross@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
mfd: lpc_ich: Assign subdevice ids automatically
[ Upstream commit 1abf25a25b86dcfe28d243a5af71bd1c9d6de1ef ]
Using -1 as platform device id means that the platform driver core will not
assign any id to the device (the device name will not have id at all). This
results problems on systems that have multiple PCHs (Platform Controller
HUBs) because all of them also include their own copy of LPC device.
All the subsequent device creations will fail because there already exists
platform device with the same name.
Fix this by passing PLATFORM_DEVID_AUTO as platform device id. This makes
the platform device core to allocate new ids automatically.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
drm/radeon: fix hotplug race at startup
[ Upstream commit 7f98ca454ad373fc1b76be804fa7138ff68c1d27 ]
We apparantly get a hotplug irq before we've initialised
modesetting,
[drm] Loading R100 Microcode
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c125f56f>] __mutex_lock_slowpath+0x23/0x91
*pde = 00000000
Oops: 0002 [#1]
Modules linked in: radeon(+) drm_kms_helper ttm drm i2c_algo_bit backlight pcspkr psmouse evdev sr_mod input_leds led_class cdrom sg parport_pc parport floppy intel_agp intel_gtt lpc_ich acpi_cpufreq processor button mfd_core agpgart uhci_hcd ehci_hcd rng_core snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm usbcore usb_common i2c_i801 i2c_core snd_timer snd soundcore thermal_sys
CPU: 0 PID: 15 Comm: kworker/0:1 Not tainted 4.2.0-rc7-00015-gbf67402 #111
Hardware name: MicroLink /D850MV , BIOS MV85010A.86A.0067.P24.0304081124 04/08/2003
Workqueue: events radeon_hotplug_work_func [radeon]
task: f6ca5900 ti: f6d3e000 task.ti: f6d3e000
EIP: 0060:[<c125f56f>] EFLAGS: 00010282 CPU: 0
EIP is at __mutex_lock_slowpath+0x23/0x91
EAX: 00000000 EBX: f5e900fc ECX: 00000000 EDX: fffffffe
ESI: f6ca5900 EDI: f5e90100 EBP: f5e90000 ESP: f6d3ff0c
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 36f61000 CR4: 000006d0
Stack:
f5e90100 00000000 c103c4c1 f6d2a5a0 f5e900fc f6df394c c125f162 f8b0faca
f6d2a5a0 c138ca00 f6df394c f7395600 c1034741 00d40000 00000000 f6d2a5a0
c138ca00 f6d2a5b8 c138ca10 c1034b58 00000001 f6d40000 f6ca5900 f6d0c940
Call Trace:
[<c103c4c1>] ? dequeue_task_fair+0xa4/0xb7
[<c125f162>] ? mutex_lock+0x9/0xa
[<f8b0faca>] ? radeon_hotplug_work_func+0x17/0x57 [radeon]
[<c1034741>] ? process_one_work+0xfc/0x194
[<c1034b58>] ? worker_thread+0x18d/0x218
[<c10349cb>] ? rescuer_thread+0x1d5/0x1d5
[<c103742a>] ? kthread+0x7b/0x80
[<c12601c0>] ? ret_from_kernel_thread+0x20/0x30
[<c10373af>] ? init_completion+0x18/0x18
Code: 42 08 e8 8e a6 dd ff c3 57 56 53 83 ec 0c 8b 35 48 f7 37 c1 8b 10 4a 74 1a 89 c3 8d 78 04 8b 40 08 89 63
Reported-and-Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ipv6: Make MLD packets to only be processed locally
[ Upstream commit 4c938d22c88a9ddccc8c55a85e0430e9c62b1ac5 ]
Before commit daad151263cf ("ipv6: Make ipv6_is_mld() inline and use it
from ip6_mc_input().") MLD packets were only processed locally. After the
change, a copy of MLD packet goes through ip6_mr_input, causing
MRT6MSG_NOCACHE message to be generated to user space.
Make MLD packet only processed locally.
Fixes: daad151263cf ("ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input().")
Signed-off-by: Hermin Anggawijaya <hermin.anggawijaya@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
net: graceful exit from netif_alloc_netdev_queues()
[ Upstream commit d339727c2b1a10f25e6636670ab6e1841170e328 ]
User space can crash kernel with
ip link add ifb10 numtxqueues 100000 type ifb
We must replace a BUG_ON() by proper test and return -EINVAL for
crazy values.
Fixes: 60877a32bce00 ("net: allow large number of tx queues")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ip_tunnel: fix ipv4 pmtu check to honor inner ip header df
[ Upstream commit fc24f2b2094366da8786f59f2606307e934cea17 ]
Frag needed should be sent only if the inner header asked
to not fragment. Currently fragmentation is broken if the
tunnel has df set, but df was not asked in the original
packet. The tunnel's df needs to be still checked to update
internally the pmtu cache.
Commit 23a3647bc4f93bac broke it, and this commit fixes
the ipv4 df check back to the way it was.
Fixes: 23a3647bc4f93bac ("ip_tunnels: Use skb-len to PMTU check.")
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
net/tipc: initialize security state for new connection socket
[ Upstream commit fdd75ea8df370f206a8163786e7470c1277a5064 ]
Calling connect() with an AF_TIPC socket would trigger a series
of error messages from SELinux along the lines of:
SELinux: Invalid class 0
type=AVC msg=audit(1434126658.487:34500): avc: denied { <unprintable> }
for pid=292 comm="kworker/u16:5" scontext=system_u:system_r:kernel_t:s0
tcontext=system_u:object_r:unlabeled_t:s0 tclass=<unprintable>
permissive=0
This was due to a failure to initialize the security state of the new
connection sock by the tipc code, leaving it with junk in the security
class field and an unlabeled secid. Add a call to security_sk_clone()
to inherit the security state from the parent socket.
Reported-by: Tim Shearer <tim.shearer@overturenetworks.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
bridge: mdb: zero out the local br_ip variable before use
[ Upstream commit f1158b74e54f2e2462ba5e2f45a118246d9d5b43 ]
Since commit b0e9a30dd669 ("bridge: Add vlan id to multicast groups")
there's a check in br_ip_equal() for a matching vlan id, but the mdb
functions were not modified to use (or at least zero it) so when an
entry was added it would have a garbage vlan id (from the local br_ip
variable in __br_mdb_add/del) and this would prevent it from being
matched and also deleted. So zero out the whole local ip var to protect
ourselves from future changes and also to fix the current bug, since
there's no vlan id support in the mdb uapi - use always vlan id 0.
Example before patch:
root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb
dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent
RTNETLINK answers: Invalid argument
After patch:
root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb
dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Fixes: b0e9a30dd669 ("bridge: Add vlan id to multicast groups")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
net: pktgen: fix race between pktgen_thread_worker() and kthread_stop()
[ Upstream commit fecdf8be2d91e04b0a9a4f79ff06499a36f5d14f ]
pktgen_thread_worker() is obviously racy, kthread_stop() can come
between the kthread_should_stop() check and set_current_state().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Reported-by: Marcelo Leitner <mleitner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
net: do not process device backlog during unregistration
[ Upstream commit e9e4dd3267d0c5234c5c0f47440456b10875dec9 ]
commit 381c759d9916 ("ipv4: Avoid crashing in ip_error")
fixes a problem where processed packet comes from device
with destroyed inetdev (dev->ip_ptr). This is not expected
because inetdev_destroy is called in NETDEV_UNREGISTER
phase and packets should not be processed after
dev_close_many() and synchronize_net(). Above fix is still
required because inetdev_destroy can be called for other
reasons. But it shows the real problem: backlog can keep
packets for long time and they do not hold reference to
device. Such packets are then delivered to upper levels
at the same time when device is unregistered.
Calling flush_backlog after NETDEV_UNREGISTER_FINAL still
accounts all packets from backlog but before that some packets
continue to be delivered to upper levels long after the
synchronize_net call which is supposed to wait the last
ones. Also, as Eric pointed out, processed packets, mostly
from other devices, can continue to add new packets to backlog.
Fix the problem by moving flush_backlog early, after the
device driver is stopped and before the synchronize_net() call.
Then use netif_running check to make sure we do not add more
packets to backlog. We have to do it in enqueue_to_backlog
context when the local IRQ is disabled. As result, after the
flush_backlog and synchronize_net sequence all packets
should be accounted.
Thanks to Eric W. Biederman for the test script and his
valuable feedback!
Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue")
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
net: Fix skb csum races when peeking
[ Upstream commit 89c22d8c3b278212eef6a8cc66b570bc840a6f5a ]
When we calculate the checksum on the recv path, we store the
result in the skb as an optimisation in case we need the checksum
again down the line.
This is in fact bogus for the MSG_PEEK case as this is done without
any locking. So multiple threads can peek and then store the result
to the same skb, potentially resulting in bogus skb states.
This patch fixes this by only storing the result if the skb is not
shared. This preserves the optimisations for the few cases where
it can be done safely due to locking or other reasons, e.g., SIOCINQ.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
bridge: mdb: fix double add notification
[ Upstream commit 5ebc784625ea68a9570d1f70557e7932988cd1b4 ]
Since the mdb add/del code was introduced there have been 2 br_mdb_notify
calls when doing br_mdb_add() resulting in 2 notifications on each add.
Example:
Command: bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
Before patch:
root@debian:~# bridge monitor all
[MDB]dev br0 port eth1 grp 239.0.0.1 permanent
[MDB]dev br0 port eth1 grp 239.0.0.1 permanent
After patch:
root@debian:~# bridge monitor all
[MDB]dev br0 port eth1 grp 239.0.0.1 permanent
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: cfd567543590 ("bridge: add support of adding and deleting mdb entries")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
isdn/gigaset: reset tty->receive_room when attaching ser_gigaset
[ Upstream commit fd98e9419d8d622a4de91f76b306af6aa627aa9c ]
Commit 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc"),
first merged in kernel release 3.10, caused the following regression
in the Gigaset M101 driver:
Before that commit, when closing the N_TTY line discipline in
preparation to switching to N_GIGASET_M101, receive_room would be
reset to a non-zero value by the call to n_tty_flush_buffer() in
n_tty's close method. With the removal of that call, receive_room
might be left at zero, blocking data reception on the serial line.
The present patch fixes that regression by setting receive_room
to an appropriate value in the ldisc open method.
Fixes: 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc")
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ipv6: lock socket in ip6_datagram_connect()
[ Upstream commit 03645a11a570d52e70631838cb786eb4253eb463 ]
ip6_datagram_connect() is doing a lot of socket changes without
socket being locked.
This looks wrong, at least for udp_lib_rehash() which could corrupt
lists because of concurrent udp_sk(sk)->udp_portaddr_hash accesses.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
bonding: fix destruction of bond with devices different from arphrd_ether
[ Upstream commit 06f6d1094aa0992432b1e2a0920b0ee86ccd83bf ]
When the bonding is being unloaded and the netdevice notifier is
unregistered it executes NETDEV_UNREGISTER for each device which should
remove the bond's proc entry but if the device enslaved is not of
ARPHRD_ETHER type and is in front of the bonding, it may execute
bond_release_and_destroy() first which would release the last slave and
destroy the bond device leaving the proc entry and thus we will get the
following error (with dynamic debug on for bond_netdev_event to see the
events order):
[ 908.963051] eql: event: 9
[ 908.963052] eql: IFF_SLAVE
[ 908.963054] eql: event: 2
[ 908.963056] eql: IFF_SLAVE
[ 908.963058] eql: event: 6
[ 908.963059] eql: IFF_SLAVE
[ 908.963110] bond0: Releasing active interface eql
[ 908.976168] bond0: Destroying bond bond0
[ 908.976266] bond0 (unregistering): Released all slaves
[ 908.984097] ------------[ cut here ]------------
[ 908.984107] WARNING: CPU: 0 PID: 1787 at fs/proc/generic.c:575
remove_proc_entry+0x112/0x160()
[ 908.984110] remove_proc_entry: removing non-empty directory
'net/bonding', leaking at least 'bond0'
[ 908.984111] Modules linked in: bonding(-) eql(O) 9p nfsd auth_rpcgss
oid_registry nfs_acl nfs lockd grace fscache sunrpc crct10dif_pclmul
crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev qxl drm_kms_helper
snd_hda_codec_generic aesni_intel ttm aes_x86_64 glue_helper pcspkr lrw
gf128mul ablk_helper cryptd snd_hda_intel virtio_console snd_hda_codec
psmouse serio_raw snd_hwdep snd_hda_core 9pnet_virtio 9pnet evdev joydev
drm virtio_balloon snd_pcm snd_timer snd soundcore i2c_piix4 i2c_core
pvpanic acpi_cpufreq parport_pc parport processor thermal_sys button
autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid hid sg sr_mod cdrom
ata_generic virtio_blk virtio_net floppy ata_piix e1000 libata ehci_pci
virtio_pci scsi_mod uhci_hcd ehci_hcd virtio_ring virtio usbcore
usb_common [last unloaded: bonding]
[ 908.984168] CPU: 0 PID: 1787 Comm: rmmod Tainted: G W O
4.2.0-rc2+ #8
[ 908.984170] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 908.984172] 0000000000000000 ffffffff81732d41 ffffffff81525b34
ffff8800358dfda8
[ 908.984175] ffffffff8106c521 ffff88003595af78 ffff88003595af40
ffff88003e3a4280
[ 908.984178] ffffffffa058d040 0000000000000000 ffffffff8106c59a
ffffffff8172ebd0
[ 908.984181] Call Trace:
[ 908.984188] [<ffffffff81525b34>] ? dump_stack+0x40/0x50
[ 908.984193] [<ffffffff8106c521>] ? warn_slowpath_common+0x81/0xb0
[ 908.984196] [<ffffffff8106c59a>] ? warn_slowpath_fmt+0x4a/0x50
[ 908.984199] [<ffffffff81218352>] ? remove_proc_entry+0x112/0x160
[ 908.984205] [<ffffffffa05850e6>] ? bond_destroy_proc_dir+0x26/0x30
[bonding]
[ 908.984208] [<ffffffffa057540e>] ? bond_net_exit+0x8e/0xa0 [bonding]
[ 908.984217] [<ffffffff8142f407>] ? ops_exit_list.isra.4+0x37/0x70
[ 908.984225] [<ffffffff8142f52d>] ?
unregister_pernet_operations+0x8d/0xd0
[ 908.984228] [<ffffffff8142f58d>] ?
unregister_pernet_subsys+0x1d/0x30
[ 908.984232] [<ffffffffa0585269>] ? bonding_exit+0x23/0xdba [bonding]
[ 908.984236] [<ffffffff810e28ba>] ? SyS_delete_module+0x18a/0x250
[ 908.984241] [<ffffffff81086f99>] ? task_work_run+0x89/0xc0
[ 908.984244] [<ffffffff8152b732>] ?
entry_SYSCALL_64_fastpath+0x16/0x75
[ 908.984247] ---[ end trace 7c006ed4abbef24b ]---
Thus remove the proc entry manually if bond_release_and_destroy() is
used. Because of the checks in bond_remove_proc_entry() it's not a
problem for a bond device to change namespaces (the bug fixed by the
Fixes commit) but since commit
f9399814927ad ("bonding: Don't allow bond devices to change network
namespaces.") that can't happen anyway.
Reported-by: Carol Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: a64d49c3dd50 ("bonding: Manage /proc/net/bonding/ entries from
the netdev events")
Tested-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
bonding: correct the MAC address for "follow" fail_over_mac policy
[ Upstream commit a951bc1e6ba58f11df5ed5ddc41311e10f5fd20b ]
The "follow" fail_over_mac policy is useful for multiport devices that
either become confused or incur a performance penalty when multiple
ports are programmed with the same MAC address, but the same MAC
address still may happened by this steps for this policy:
1) echo +eth0 > /sys/class/net/bond0/bonding/slaves
bond0 has the same mac address with eth0, it is MAC1.
2) echo +eth1 > /sys/class/net/bond0/bonding/slaves
eth1 is backup, eth1 has MAC2.
3) ifconfig eth0 down
eth1 became active slave, bond will swap MAC for eth0 and eth1,
so eth1 has MAC1, and eth0 has MAC2.
4) ifconfig eth1 down
there is no active slave, and eth1 still has MAC1, eth2 has MAC2.
5) ifconfig eth0 up
the eth0 became active slave again, the bond set eth0 to MAC1.
Something wrong here, then if you set eth1 up, the eth0 and eth1 will have the same
MAC address, it will break this policy for ACTIVE_BACKUP mode.
This patch will fix this problem by finding the old active slave and
swap them MAC address before change active slave.
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
inet: frags: fix defragmented packet's IP header for af_packet
[ Upstream commit 0848f6428ba3a2e42db124d41ac6f548655735bf ]
When ip_frag_queue() computes positions, it assumes that the passed
sk_buff does not contain L2 headers.
However, when PACKET_FANOUT_FLAG_DEFRAG is used, IP reassembly
functions can be called on outgoing packets that contain L2 headers.
Also, IPv4 checksum is not corrected after reassembly.
Fixes: 7736d33f4262 ("packet: Add pre-defragmentation support for ipv4 fanouts.")
Signed-off-by: Edward Hyunkoo Jee <edjee@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
netlink: don't hold mutex in rcu callback when releasing mmapd ring
[ Upstream commit 0470eb99b4721586ccac954faac3fa4472da0845 ]
Kirill A. Shutemov says:
This simple test-case trigers few locking asserts in kernel:
int main(int argc, char **argv)
{
unsigned int block_size = 16 * 4096;
struct nl_mmap_req req = {
.nm_block_size = block_size,
.nm_block_nr = 64,
.nm_frame_size = 16384,
.nm_frame_nr = 64 * block_size / 16384,
};
unsigned int ring_size;
int fd;
fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC);
if (setsockopt(fd, SOL_NETLINK, NETLINK_RX_RING, &req, sizeof(req)) < 0)
exit(1);
if (setsockopt(fd, SOL_NETLINK, NETLINK_TX_RING, &req, sizeof(req)) < 0)
exit(1);
ring_size = req.nm_block_nr * req.nm_block_size;
mmap(NULL, 2 * ring_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
return 0;
}
+++ exited with 0 +++
BUG: sleeping function called from invalid context at /home/kas/git/public/linux-mm/kernel/locking/mutex.c:616
in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init
3 locks held by init/1:
#0: (reboot_mutex){+.+...}, at: [<ffffffff81080959>] SyS_reboot+0xa9/0x220
#1: ((reboot_notifier_list).rwsem){.+.+..}, at: [<ffffffff8107f379>] __blocking_notifier_call_chain+0x39/0x70
#2: (rcu_callback){......}, at: [<ffffffff810d32e0>] rcu_do_batch.isra.49+0x160/0x10c0
Preemption disabled at:[<ffffffff8145365f>] __delay+0xf/0x20
CPU: 1 PID: 1 Comm: init Not tainted 4.1.0-00009-gbddf4c4818e0 #253
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Debian-1.8.2-1 04/01/2014
ffff88017b3d8000 ffff88027bc03c38 ffffffff81929ceb 0000000000000102
0000000000000000 ffff88027bc03c68 ffffffff81085a9d 0000000000000002
ffffffff81ca2a20 0000000000000268 0000000000000000 ffff88027bc03c98
Call Trace:
<IRQ> [<ffffffff81929ceb>] dump_stack+0x4f/0x7b
[<ffffffff81085a9d>] ___might_sleep+0x16d/0x270
[<ffffffff81085bed>] __might_sleep+0x4d/0x90
[<ffffffff8192e96f>] mutex_lock_nested+0x2f/0x430
[<ffffffff81932fed>] ? _raw_spin_unlock_irqrestore+0x5d/0x80
[<ffffffff81464143>] ? __this_cpu_preempt_check+0x13/0x20
[<ffffffff8182fc3d>] netlink_set_ring+0x1ed/0x350
[<ffffffff8182e000>] ? netlink_undo_bind+0x70/0x70
[<ffffffff8182fe20>] netlink_sock_destruct+0x80/0x150
[<ffffffff817e484d>] __sk_free+0x1d/0x160
[<ffffffff817e49a9>] sk_free+0x19/0x20
[..]
Cong Wang says:
We can't hold mutex lock in a rcu callback, [..]
Thomas Graf says:
The socket should be dead at this point. It might be simpler to
add a netlink_release_ring() function which doesn't require
locking at all.
Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Diagnosed-by: Cong Wang <cwang@twopensource.com>
Suggested-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
net/mlx4_core: Fix wrong index in propagating port change event to VFs
[ Upstream commit 1c1bf34951e8d17941bf708d1901c47e81b15d55 ]
The port-change e…
parheliamm
pushed a commit
to moetayuko/android_kernel_oneplus_msm8996
that referenced
this issue
Jun 24, 2016
[ Upstream commit 24ee3cf ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Alucard24
pushed a commit
to Alucard24/Alucard-Kernel-LG-G5
that referenced
this issue
Jul 14, 2016
[ Upstream commit 24ee3cf ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Alucard24
pushed a commit
to Alucard24/Alucard-Kernel-LG-G5
that referenced
this issue
Jul 19, 2016
[ Upstream commit 24ee3cf ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
|
I see this issue of cannot start containers on "3.19.0-25-generic". |
LGaljo
pushed a commit
to LGaljo/android_kernel_samsung_herolte
that referenced
this issue
Oct 15, 2017
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
GhaithCraft
pushed a commit
to GhaithCraft/old-source
that referenced
this issue
Nov 3, 2017
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
GhaithCraft
pushed a commit
to Exynos7880/OptiKernel
that referenced
this issue
Jan 13, 2018
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
lzzy12
pushed a commit
to lzzy12/universal7870
that referenced
this issue
Jan 24, 2018
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Mohi1117
pushed a commit
to Mohi1117/android_kernel_samsung_exynos7870
that referenced
this issue
Feb 15, 2018
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Mohi1117
pushed a commit
to Mohi1117/android_kernel_samsung_exynos7870
that referenced
this issue
Feb 18, 2018
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
kirito96
pushed a commit
to kirito96/android_kernel_tcl_pixi4-4
that referenced
this issue
Jul 28, 2018
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
prashantpaddune
pushed a commit
to Quantum-kernel/Quantum-Exynos7870
that referenced
this issue
Nov 22, 2018
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Astrako
pushed a commit
to Astrako/a3y17lte_oreo_sources
that referenced
this issue
Dec 20, 2018
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> (cherry picked from commit 8953953036ccc1d2276e388cf3f25cd4e1d80e1e)
DidntRead
pushed a commit
to DidntRead/android_kernel_lenovo_k5fpr
that referenced
this issue
Feb 12, 2019
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Koloses
pushed a commit
to Koloses/android_kernel_a3y17lte
that referenced
this issue
Feb 27, 2019
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Kyvangka1610
pushed a commit
to Kyvangka1610/android_kernel_LenovoA7010a48
that referenced
this issue
Aug 18, 2019
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
488315
pushed a commit
to mt8163/android_kernel_amazon_karnak
that referenced
this issue
Aug 22, 2019
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
488315
pushed a commit
to mt8163/android_kernel_amazon_karnak
that referenced
this issue
Sep 9, 2019
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
carlitros900
pushed a commit
to carlitros900/android_kernel_amazon_douglas
that referenced
this issue
Nov 3, 2019
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
akamphon
pushed a commit
to akamphon/android_kernel_samsung_universal7880
that referenced
this issue
Nov 25, 2019
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
bphaslett
pushed a commit
to bphaslett/android_kernel_amazon_karnak
that referenced
this issue
Jun 1, 2020
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
bphaslett
pushed a commit
to bphaslett/android_kernel_amazon_karnak
that referenced
this issue
Jun 11, 2020
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Huawei-Dev
pushed a commit
to Huawei-Dev/android_kernel_huawei_btv
that referenced
this issue
Jul 5, 2020
The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
rlawoehd187
pushed a commit
to rlawoehd187/android_kernel_pantech_msm8937
that referenced
this issue
Jul 9, 2020
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
rlawoehd187
pushed a commit
to rlawoehd187/android_kernel_pantech_msm8937
that referenced
this issue
Jul 10, 2020
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
almondnguyen
pushed a commit
to almondnguyen/android_kernel_samsung_grandppltedx
that referenced
this issue
Jan 22, 2021
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
ghost
pushed a commit
to crevanthsv/kernel_xiaomi_sakura
that referenced
this issue
May 15, 2021
The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
turtleletortue
pushed a commit
to turtleletortue/android_kernel_retroid_pocket2
that referenced
this issue
Dec 4, 2021
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
|
Is this still an issue? I see a lot of commits above that mention fixing this issue |
HoangLong-Lumi
pushed a commit
to almondnguyen/android_kernel_samsung_grandppltedx
that referenced
this issue
Sep 6, 2023
[ Upstream commit 24ee3cf89bef04e8bc23788aca4e029a3f0f06d9 ] The comment says it's using trialcs->mems_allowed as a temp variable but it didn't match the code. Change the code to match the comment. This fixes an issue when writing in cpuset.mems when a sub-directory exists: we need to write several times for the information to persist: | root@alban:/sys/fs/cgroup/cpuset# mkdir footest9 | root@alban:/sys/fs/cgroup/cpuset# cd footest9 | root@alban:/sys/fs/cgroup/cpuset/footest9# mkdir aa | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | | root@alban:/sys/fs/cgroup/cpuset/footest9# echo 0 > aa/cpuset.mems | root@alban:/sys/fs/cgroup/cpuset/footest9# cat aa/cpuset.mems | 0 | root@alban:/sys/fs/cgroup/cpuset/footest9# This should help to fix the following issue in Docker: opencontainers/runc#133 In some conditions, a Docker container needs to be started twice in order to work. Signed-off-by: Alban Crequy <alban@endocode.com> Tested-by: Iago López Galeiras <iago@endocode.com> Cc: <stable@vger.kernel.org> # 3.17+ Acked-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I was occasionally getting this error when running docker:
After investigating a bit I found the cause of the problem.
I get this error because
cpuset.memsin the container's cpuset cgroup directory is empty. In that case, libcontainer sets that file to the value of the parent and does this recursively until it finds an existing parent.An example might be easier to understand, if the container's cpuset cgroup directory is
and the current existing directories are
libcontainer will start at
docker-ca65deb2d7972d5a1772023ad82d843bb639fcfea9d75e78e0f99fcad9e683ba.scope, go to the parent and then go one more level up tocpusetbecausesystem.slicedoesn't exist. Then it will set/sys/fs/cgroup/cpuset/system.slice/cpuset.memsto the value in/sys/fs/cgroup/cpuset/cpuset.memsand/sys/fs/cgroup/cpuset/system.slice/docker-ca65deb2d7972d5a1772023ad82d843bb639fcfea9d75e78e0f99fcad9e683ba.scope/cpuset.memsto that same value.This works fine when
/sys/fs/cgroup/system.slicedoesn't exist. But if it exists and has an empty value,/sys/fs/cgroup/cpuset/system.slice/docker-ca65deb2d7972d5a1772023ad82d843bb639fcfea9d75e78e0f99fcad9e683ba.scope/cpuset.memswill also end up with an empty value, causing the error.The solution could be keeping the recursion until you find the first non-empty value or you're out of the cpuset controller.
/cc @crosbymichael @kayrus @alban
The text was updated successfully, but these errors were encountered: