README: add the deep-kernel information to the README #5

huangbibo · 2022-10-21T06:11:31Z

Signed-off-by: huangbibo huangbibo@uniontech.com
Change-Id: I71a252108c26840205576414db19a6c4c9e1b7f1

Signed-off-by: huangbibo <huangbibo@uniontech.com> Change-Id: I71a252108c26840205576414db19a6c4c9e1b7f1

[ Upstream commit 93a3319 ] The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7962ef1 ] In 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") it only was freeing if strcmp(evsel->tp_format->system, "syscalls") returned zero, while the corresponding initialization of evsel->priv was being performed if it was _not_ zero, i.e. if the tp system wasn't 'syscalls'. Just stop looking for that and free it if evsel->priv was set, which should be equivalent. Also use the pre-existing evsel_trace__delete() function. This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]# With this we plug all leaks with "perf trace sleep 1". Fixes: 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Link: https://lore.kernel.org/lkml/20230719202951.534582-5-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ef23cb5 ] While debugging a segfault on 'perf lock contention' without an available perf.data file I noticed that it was basically calling: perf_session__delete(ERR_PTR(-1)) Resulting in: (gdb) run lock contention Starting program: /root/bin/perf lock contention [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". failed to open perf.data: No such file or directory (try 'perf record' first) Initializing perf session failed Program received signal SIGSEGV, Segmentation fault. 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 2858 if (!session->auxtrace) (gdb) p session $1 = (struct perf_session *) 0xffffffffffffffff (gdb) bt #0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 #1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300 #2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161 #3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604 #4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322 #5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375 #6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419 #7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535 (gdb) So just set it to NULL after using PTR_ERR(session) to decode the error as perf_session__delete(NULL) is supported. The same problem was found in 'perf top' after an audit of all perf_session__new() failure handling. Fixes: 6ef81c5 ("perf session: Return error code for perf_session__new() function on failure") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Cc: Mukesh Ojha <mojha@codeaurora.org> Cc: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: https://lore.kernel.org/lkml/ZN4Q2rxxsL08A8rd@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit abaf1e0 ] While debugging a segfault on 'perf lock contention' without an available perf.data file I noticed that it was basically calling: perf_session__delete(ERR_PTR(-1)) Resulting in: (gdb) run lock contention Starting program: /root/bin/perf lock contention [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". failed to open perf.data: No such file or directory (try 'perf record' first) Initializing perf session failed Program received signal SIGSEGV, Segmentation fault. 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 2858 if (!session->auxtrace) (gdb) p session $1 = (struct perf_session *) 0xffffffffffffffff (gdb) bt #0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 #1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300 #2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161 #3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604 #4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322 #5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375 #6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419 #7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535 (gdb) So just set it to NULL after using PTR_ERR(session) to decode the error as perf_session__delete(NULL) is supported. Fixes: eef4fee ("perf lock: Dynamically allocate lockhash_table") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Ross Zwisler <zwisler@chromium.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Yang Jihong <yangjihong1@huawei.com> Link: https://lore.kernel.org/lkml/ZN4R1AYfsD2J8lRs@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ade32bd ] unix_tot_inflight is changed under spin_lock(unix_gc_lock), but unix_release_sock() reads it locklessly. Let's use READ_ONCE() for unix_tot_inflight. Note that the writer side was marked by commit 9d6d7f1 ("af_unix: annote lockless accesses to unix_tot_inflight & gc_in_progress") BUG: KCSAN: data-race in unix_inflight / unix_release_sock write (marked) to 0xffffffff871852b8 of 4 bytes by task 123 on cpu 1: unix_inflight+0x130/0x180 net/unix/scm.c:64 unix_attach_fds+0x137/0x1b0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1832 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1955 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x148/0x160 net/socket.c:747 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2493 ___sys_sendmsg+0xc6/0x140 net/socket.c:2547 __sys_sendmsg+0x94/0x140 net/socket.c:2576 __do_sys_sendmsg net/socket.c:2585 [inline] __se_sys_sendmsg net/socket.c:2583 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2583 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffffffff871852b8 of 4 bytes by task 4891 on cpu 0: unix_release_sock+0x608/0x910 net/unix/af_unix.c:671 unix_release+0x59/0x80 net/unix/af_unix.c:1058 __sock_release+0x7d/0x170 net/socket.c:653 sock_close+0x19/0x30 net/socket.c:1385 __fput+0x179/0x5e0 fs/file_table.c:321 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 4891 Comm: systemd-coredum Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 9305cfa ("[AF_UNIX]: Make unix_tot_inflight counter non-atomic") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 374012b upstream. Fix the deadlock by refactoring the MR cache cleanup flow to flush the workqueue without holding the rb_lock. This adds a race between cache cleanup and creation of new entries which we solve by denied creation of new entries after cache cleanup started. Lockdep: WARNING: possible circular locking dependency detected [ 2785.326074 ] 6.2.0-rc6_for_upstream_debug_2023_01_31_14_02 #1 Not tainted [ 2785.339778 ] ------------------------------------------------------ [ 2785.340848 ] devlink/53872 is trying to acquire lock: [ 2785.341701 ] ffff888124f8c0c8 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0xc8/0x900 [ 2785.343403 ] [ 2785.343403 ] but task is already holding lock: [ 2785.344464 ] ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] [ 2785.346273 ] [ 2785.346273 ] which lock already depends on the new lock. [ 2785.346273 ] [ 2785.347720 ] [ 2785.347720 ] the existing dependency chain (in reverse order) is: [ 2785.349003 ] [ 2785.349003 ] -> #1 (&dev->cache.rb_lock){+.+.}-{3:3}: [ 2785.350160 ] __mutex_lock+0x14c/0x15c0 [ 2785.350962 ] delayed_cache_work_func+0x2d1/0x610 [mlx5_ib] [ 2785.352044 ] process_one_work+0x7c2/0x1310 [ 2785.352879 ] worker_thread+0x59d/0xec0 [ 2785.353636 ] kthread+0x28f/0x330 [ 2785.354370 ] ret_from_fork+0x1f/0x30 [ 2785.355135 ] [ 2785.355135 ] -> #0 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}: [ 2785.356515 ] __lock_acquire+0x2d8a/0x5fe0 [ 2785.357349 ] lock_acquire+0x1c1/0x540 [ 2785.358121 ] __flush_work+0xe8/0x900 [ 2785.358852 ] __cancel_work_timer+0x2c7/0x3f0 [ 2785.359711 ] mlx5_mkey_cache_cleanup+0xfb/0x250 [mlx5_ib] [ 2785.360781 ] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x16/0x30 [mlx5_ib] [ 2785.361969 ] __mlx5_ib_remove+0x68/0x120 [mlx5_ib] [ 2785.362960 ] mlx5r_remove+0x63/0x80 [mlx5_ib] [ 2785.363870 ] auxiliary_bus_remove+0x52/0x70 [ 2785.364715 ] device_release_driver_internal+0x3c1/0x600 [ 2785.365695 ] bus_remove_device+0x2a5/0x560 [ 2785.366525 ] device_del+0x492/0xb80 [ 2785.367276 ] mlx5_detach_device+0x1a9/0x360 [mlx5_core] [ 2785.368615 ] mlx5_unload_one_devl_locked+0x5a/0x110 [mlx5_core] [ 2785.369934 ] mlx5_devlink_reload_down+0x292/0x580 [mlx5_core] [ 2785.371292 ] devlink_reload+0x439/0x590 [ 2785.372075 ] devlink_nl_cmd_reload+0xaef/0xff0 [ 2785.372973 ] genl_family_rcv_msg_doit.isra.0+0x1bd/0x290 [ 2785.374011 ] genl_rcv_msg+0x3ca/0x6c0 [ 2785.374798 ] netlink_rcv_skb+0x12c/0x360 [ 2785.375612 ] genl_rcv+0x24/0x40 [ 2785.376295 ] netlink_unicast+0x438/0x710 [ 2785.377121 ] netlink_sendmsg+0x7a1/0xca0 [ 2785.377926 ] sock_sendmsg+0xc5/0x190 [ 2785.378668 ] __sys_sendto+0x1bc/0x290 [ 2785.379440 ] __x64_sys_sendto+0xdc/0x1b0 [ 2785.380255 ] do_syscall_64+0x3d/0x90 [ 2785.381031 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 2785.381967 ] [ 2785.381967 ] other info that might help us debug this: [ 2785.381967 ] [ 2785.383448 ] Possible unsafe locking scenario: [ 2785.383448 ] [ 2785.384544 ] CPU0 CPU1 [ 2785.385383 ] ---- ---- [ 2785.386193 ] lock(&dev->cache.rb_lock); [ 2785.386940 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.388327 ] lock(&dev->cache.rb_lock); [ 2785.389425 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.390414 ] [ 2785.390414 ] *** DEADLOCK *** [ 2785.390414 ] [ 2785.391579 ] 6 locks held by devlink/53872: [ 2785.392341 ] #0: ffffffff84c17a50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 [ 2785.393630 ] #1: ffff888142280218 (&devlink->lock_key){+.+.}-{3:3}, at: devlink_get_from_attrs_lock+0x12d/0x2d0 [ 2785.395324 ] #2: ffff8881422d3c38 (&dev->lock_key){+.+.}-{3:3}, at: mlx5_unload_one_devl_locked+0x4a/0x110 [mlx5_core] [ 2785.397322 ] #3: ffffffffa0e59068 (mlx5_intf_mutex){+.+.}-{3:3}, at: mlx5_detach_device+0x60/0x360 [mlx5_core] [ 2785.399231 ] #4: ffff88810e3cb0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 2785.400864 ] #5: ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] Fixes: b958451 ("RDMA/mlx5: Change the cache structure to an RB-tree") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c15cdea upstream. Commit b035f5a ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible") allows architectures with non-coherent DMA to define a small ARCH_KMALLOC_MINALIGN (e.g. sizeof(unsigned long long)) and this has been enabled on arm64. With KASAN_HW_TAGS enabled, however, ARCH_SLAB_MINALIGN becomes 16 on arm64 (arch_slab_minalign() dynamically selects it since commit d949a81 ("mm: make minimum slab alignment a runtime property")). This can lead to a situation where kmalloc-8 caches are attempted to be created with a kmem_caches.size aligned to 16. When the cache is mergeable, it can lead to kernel warnings like: sysfs: cannot create duplicate filename '/kernel/slab/:d-0000016' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc1-00001-gda98843cd306-dirty #5 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: dump_backtrace+0x90/0xe8 show_stack+0x18/0x24 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x24 sysfs_warn_dup+0x64/0x80 sysfs_create_dir_ns+0xe8/0x108 kobject_add_internal+0x98/0x264 kobject_init_and_add+0x8c/0xd8 sysfs_slab_add+0x12c/0x248 slab_sysfs_init+0x98/0x14c do_one_initcall+0x6c/0x1b0 kernel_init_freeable+0x1c0/0x288 kernel_init+0x24/0x1e0 ret_from_fork+0x10/0x20 kobject: kobject_add_internal failed for :d-0000016 with -EEXIST, don't try to register things with the same name in the same directory. SLUB: Unable to add boot slab dma-kmalloc-8 to sysfs Limit the __kmalloc_minalign() return value (used to create the kmalloc-* caches) to arch_slab_minalign() so that kmalloc-8 caches are skipped when KASAN_HW_TAGS is enabled (both config and runtime). Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: b035f5a ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible") Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: stable@vger.kernel.org # 6.5.x Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a84fbf2 ] Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 #12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230906003912.3317462-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ede72dc ] Fuzzing found that an invalid tracepoint name would create a memory leak with an address sanitizer build: ``` $ perf stat -e '*:o/' true event syntax error: '*:o/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ================================================================= ==59380==ERROR: LeakSanitizer: detected memory leaks Direct leak of 4 byte(s) in 2 object(s) allocated from: #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x55f2f41be73b in str util/parse-events.l:49 #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338 #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464 #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822 #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094 #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279 #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251 #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351 #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539 #10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654 #11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501 #12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322 #13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375 #14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419 #15 0x55f2f409412b in main tools/perf/perf.c:535 SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s). ``` Fix by adding the missing destructor. Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <irogers@google.com> Cc: He Kuang <hekuang@huawei.com> Link: https://lore.kernel.org/r/20230914164028.363220-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a84fbf2 ] Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 #12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230906003912.3317462-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ede72dc ] Fuzzing found that an invalid tracepoint name would create a memory leak with an address sanitizer build: ``` $ perf stat -e '*:o/' true event syntax error: '*:o/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ================================================================= ==59380==ERROR: LeakSanitizer: detected memory leaks Direct leak of 4 byte(s) in 2 object(s) allocated from: #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x55f2f41be73b in str util/parse-events.l:49 #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338 #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464 #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822 #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094 #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279 #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251 #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351 #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539 #10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654 #11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501 #12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322 #13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375 #14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419 #15 0x55f2f409412b in main tools/perf/perf.c:535 SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s). ``` Fix by adding the missing destructor. Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <irogers@google.com> Cc: He Kuang <hekuang@huawei.com> Link: https://lore.kernel.org/r/20230914164028.363220-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit d8b90d6 upstream. When scanning namespaces, it is possible to get valid data from the first call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second call in nvme_update_ns_info_block(). In particular, if the NSID becomes inactive between the two commands, a storage device may return a buffer filled with zero as per 4.1.5.1. In this case, we can get a kernel crash due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will be set to zero. PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10" #0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7 #1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa #2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788 #3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb #4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce #5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595 #6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6 #7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926 [exception RIP: blk_stack_limits+434] RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core] #9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core] This happened when the check for valid data was moved out of nvme_identify_ns() into one of the callers. Fix this by checking in both callers. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186 Fixes: 0dd6fff ("nvme: bring back auto-removal of deleted namespaces during sequential scan") Cc: stable@vger.kernel.org Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit fe2b122 upstream. When working on LED support for r8169 I got the following lockdep warning. Easiest way to prevent this scenario seems to be to take the RTNL lock before the trigger_data lock in set_device_name(). ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc2-next-20231124+ #2 Not tainted ------------------------------------------------------ bash/383 is trying to acquire lock: ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev] but task is already holding lock: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 rtnl_lock+0x12/0x20 set_device_name+0xa9/0x120 [ledtrig_netdev] netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 -> #0 (&trigger_data->lock){+.+.}-{3:3}: __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&trigger_data->lock); lock(rtnl_mutex); lock(&trigger_data->lock); *** DEADLOCK *** 8 locks held by bash/383: #0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0 #1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210 #2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210 #3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140 #4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140 #5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140 #6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120 #7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 stack backtrace: CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2 Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023 Call Trace: <TASK> dump_stack_lvl+0x5c/0xd0 dump_stack+0x10/0x20 print_circular_bug+0x2dd/0x410 check_noncircular+0x131/0x150 __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] __mutex_lock+0x9b/0xb50 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __this_cpu_preempt_check+0x13/0x20 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __cancel_work_timer+0x11c/0x1b0 ? __mutex_lock+0x123/0xb50 mutex_lock_nested+0x16/0x20 ? mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 ? preempt_count_add+0x49/0xc0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 RIP: 0033:0x7f269055d034 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034 RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001 RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007 R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000 </TASK> Fixes: d5e0126 ("leds: trigger: netdev: add additional specific link speed mode") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/fb5c8294-2a10-4bf5-8f10-3d2b77d2757e@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1469417 ] Trying to suspend to RAM on SAMA5D27 EVK leads to the following lockdep warning: ============================================ WARNING: possible recursive locking detected 6.7.0-rc5-wt+ #532 Not tainted -------------------------------------------- sh/92 is trying to acquire lock: c3cf306c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 but task is already holding lock: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by sh/92: #0: c3aa0258 (sb_writers#6){.+.+}-{0:0}, at: ksys_write+0xd8/0x178 #1: c4c2df44 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x138/0x284 #2: c32684a0 (kn->active){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x148/0x284 #3: c232b6d4 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend+0x13c/0x4e8 #4: c387b088 (&dev->mutex){....}-{3:3}, at: __device_suspend+0x1e8/0x91c #5: c3d7c46c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0xe8/0x100 stack backtrace: CPU: 0 PID: 92 Comm: sh Not tainted 6.7.0-rc5-wt+ #532 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __lock_acquire+0x19ec/0x3a0c __lock_acquire from lock_acquire.part.0+0x124/0x2d0 lock_acquire.part.0 from _raw_spin_lock_irqsave+0x5c/0x78 _raw_spin_lock_irqsave from __irq_get_desc_lock+0xe8/0x100 __irq_get_desc_lock from irq_set_irq_wake+0xa8/0x204 irq_set_irq_wake from atmel_gpio_irq_set_wake+0x58/0xb4 atmel_gpio_irq_set_wake from irq_set_irq_wake+0x100/0x204 irq_set_irq_wake from gpio_keys_suspend+0xec/0x2b8 gpio_keys_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from dpm_suspend+0x224/0x43c dpm_suspend from dpm_suspend_start+0x9c/0xa8 dpm_suspend_start from suspend_devices_and_enter+0x1e0/0xa84 suspend_devices_and_enter from pm_suspend+0x460/0x4e8 pm_suspend from state_store+0x78/0xe4 state_store from kernfs_fop_write_iter+0x1a0/0x284 kernfs_fop_write_iter from vfs_write+0x38c/0x6f4 vfs_write from ksys_write+0xd8/0x178 ksys_write from ret_fast_syscall+0x0/0x1c Exception stack(0xc52b3fa8 to 0xc52b3ff0) 3fa0: 00000004 005a0ae8 00000001 005a0ae8 00000004 00000001 3fc0: 00000004 005a0ae8 00000001 00000004 00000004 b6c616c0 00000020 0059d190 3fe0: 00000004 b6c61678 aec5a041 aebf1a26 This warning is raised because pinctrl-at91-pio4 uses chained IRQ. Whenever a wake up source configures an IRQ through irq_set_irq_wake, it will lock the corresponding IRQ desc, and then call irq_set_irq_wake on "parent" IRQ which will do the same on its own IRQ desc, but since those two locks share the same class, lockdep reports this as an issue. Fix lockdep false positive by setting a different class for parent and children IRQ Fixes: 7761808 ("pinctrl: introduce driver for Atmel PIO4 controller") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Link: https://lore.kernel.org/r/20231215-lockdep_warning-v1-1-8137b2510ed5@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit a8f68b1 upstream. Validate next header's offset in ->next_header() so that it isn't smaller than MID_HEADER_SIZE(server) and then standard_receive3() or ->receive() ends up writing off the end of the buffer because 'pdu_length - MID_HEADER_SIZE(server)' wraps up to a huge length: BUG: KASAN: slab-out-of-bounds in _copy_to_iter+0x4fc/0x840 Write of size 701 at addr ffff88800caf407f by task cifsd/1090 CPU: 0 PID: 1090 Comm: cifsd Not tainted 6.7.0-rc4 #5 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x650 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __phys_addr+0x46/0x90 kasan_report+0xd8/0x110 ? _copy_to_iter+0x4fc/0x840 ? _copy_to_iter+0x4fc/0x840 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x3c/0x60 _copy_to_iter+0x4fc/0x840 ? srso_alias_return_thunk+0x5/0xfbef5 ? hlock_class+0x32/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx__copy_to_iter+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_is_held_type+0x90/0x100 ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_resched+0x278/0x360 ? __pfx___might_resched+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 __skb_datagram_iter+0x2c2/0x460 ? __pfx_simple_copy_to_iter+0x10/0x10 skb_copy_datagram_iter+0x6c/0x110 tcp_recvmsg_locked+0x9be/0xf40 ? __pfx_tcp_recvmsg_locked+0x10/0x10 ? mark_held_locks+0x5d/0x90 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_recvmsg+0xe2/0x310 ? __pfx_tcp_recvmsg+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x14a/0x3a0 ? srso_alias_return_thunk+0x5/0xfbef5 inet_recvmsg+0xd0/0x370 ? __pfx_inet_recvmsg+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? do_raw_spin_trylock+0xd1/0x120 sock_recvmsg+0x10d/0x150 cifs_readv_from_socket+0x25a/0x490 [cifs] ? __pfx_cifs_readv_from_socket+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 cifs_read_from_socket+0xb5/0x100 [cifs] ? __pfx_cifs_read_from_socket+0x10/0x10 [cifs] ? __pfx_lock_release+0x10/0x10 ? do_raw_spin_trylock+0xd1/0x120 ? _raw_spin_unlock+0x23/0x40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __smb2_find_mid+0x126/0x230 [cifs] cifs_demultiplex_thread+0xd39/0x1270 [cifs] ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] ? __pfx_lock_release+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? mark_held_locks+0x1a/0x90 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0xce/0xf0 ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] kthread+0x18d/0x1d0 ? kthread+0xdb/0x1d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Fixes: 8ce79ec ("cifs: update multiplex loop to handle compounded responses") Cc: stable@vger.kernel.org Reported-by: Robert Morris <rtm@csail.mit.edu> Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

@Req

commit 33eae65 upstream. A small CIFS buffer (448 bytes) isn't big enough to hold SMB2_QUERY_INFO request along with user's input data from CIFS_QUERY_INFO ioctl. That is, if the user passed an input buffer > 344 bytes, the client will memcpy() off the end of @req->Buffer in SMB2_query_info_init() thus causing the following KASAN splat: BUG: KASAN: slab-out-of-bounds in SMB2_query_info_init+0x242/0x250 [cifs] Write of size 1023 at addr ffff88801308c5a8 by task a.out/1240 CPU: 1 PID: 1240 Comm: a.out Not tainted 6.7.0-rc4 #5 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x650 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __phys_addr+0x46/0x90 kasan_report+0xd8/0x110 ? SMB2_query_info_init+0x242/0x250 [cifs] ? SMB2_query_info_init+0x242/0x250 [cifs] kasan_check_range+0x105/0x1b0 __asan_memcpy+0x3c/0x60 SMB2_query_info_init+0x242/0x250 [cifs] ? __pfx_SMB2_query_info_init+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? smb_rqst_len+0xa6/0xc0 [cifs] smb2_ioctl_query_info+0x4f4/0x9a0 [cifs] ? __pfx_smb2_ioctl_query_info+0x10/0x10 [cifs] ? __pfx_cifsConvertToUTF16+0x10/0x10 [cifs] ? kasan_set_track+0x25/0x30 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kasan_kmalloc+0x8f/0xa0 ? srso_alias_return_thunk+0x5/0xfbef5 ? cifs_strndup_to_utf16+0x12d/0x1a0 [cifs] ? __build_path_from_dentry_optional_prefix+0x19d/0x2d0 [cifs] ? __pfx_smb2_ioctl_query_info+0x10/0x10 [cifs] cifs_ioctl+0x11c7/0x1de0 [cifs] ? __pfx_cifs_ioctl+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? rcu_is_watching+0x23/0x50 ? srso_alias_return_thunk+0x5/0xfbef5 ? __rseq_handle_notify_resume+0x6cd/0x850 ? __pfx___schedule+0x10/0x10 ? blkcg_iostat_update+0x250/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 ? ksys_write+0xe9/0x170 __x64_sys_ioctl+0xc9/0x100 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f893dde49cf Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00 00 RSP: 002b:00007ffc03ff4160 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffc03ff4378 RCX: 00007f893dde49cf RDX: 00007ffc03ff41d0 RSI: 00000000c018cf07 RDI: 0000000000000003 RBP: 00007ffc03ff4260 R08: 0000000000000410 R09: 0000000000000001 R10: 00007f893dce7300 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc03ff4388 R14: 00007f893df15000 R15: 0000000000406de0 </TASK> Fix this by increasing size of SMB2_QUERY_INFO request buffers and validating input length to prevent other callers from overflowing @Req in SMB2_query_info_init() as well. Fixes: f5b05d6 ("cifs: add IOCTL for QUERY_INFO passthrough to userspace") Cc: stable@vger.kernel.org Reported-by: Robert Morris <rtm@csail.mit.edu> Signed-off-by: Paulo Alcantara <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c312828 upstream. bpf_cgroup_from_id() is basically a wrapper to cgroup_get_from_id(), that is relying on kernfs to determine the right cgroup associated to the target id. As a kfunc, it has the potential to be attached to any function through BPF, particularly in contexts where certain locks are held. However, kernfs is not using an irq safe spinlock for kernfs_idr_lock, that means any kernfs function that is acquiring this lock can be interrupted and potentially hit bpf_cgroup_from_id() in the process, triggering a deadlock. For example, it is really easy to trigger a lockdep splat between kernfs_idr_lock and rq->_lock, attaching a small BPF program to __set_cpus_allowed_ptr_locked() that just calls bpf_cgroup_from_id(): ===================================================== WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected 6.7.0-rc7-virtme deepin-community#5 Not tainted ----------------------------------------------------- repro/131 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: ffffffffb2dc4578 (kernfs_idr_lock){+.+.}-{2:2}, at: kernfs_find_and_get_node_by_id+0x1d/0x80 and this task is already holding: ffff911cbecaf218 (&rq->__lock){-.-.}-{2:2}, at: task_rq_lock+0x50/0xc0 which would create a new lock dependency: (&rq->__lock){-.-.}-{2:2} -> (kernfs_idr_lock){+.+.}-{2:2} but this new dependency connects a HARDIRQ-irq-safe lock: (&rq->__lock){-.-.}-{2:2} ... which became HARDIRQ-irq-safe at: lock_acquire+0xbf/0x2b0 _raw_spin_lock_nested+0x2e/0x40 scheduler_tick+0x5d/0x170 update_process_times+0x9c/0xb0 tick_periodic+0x27/0xe0 tick_handle_periodic+0x24/0x70 __sysvec_apic_timer_interrupt+0x64/0x1a0 sysvec_apic_timer_interrupt+0x6f/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 memcpy+0xc/0x20 arch_dup_task_struct+0x15/0x30 copy_process+0x1ce/0x1eb0 kernel_clone+0xac/0x390 kernel_thread+0x6f/0xa0 kthreadd+0x199/0x230 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 to a HARDIRQ-irq-unsafe lock: (kernfs_idr_lock){+.+.}-{2:2} ... which became HARDIRQ-irq-unsafe at: ... lock_acquire+0xbf/0x2b0 _raw_spin_lock+0x30/0x40 __kernfs_new_node.isra.0+0x83/0x280 kernfs_create_root+0xf6/0x1d0 sysfs_init+0x1b/0x70 mnt_init+0xd9/0x2a0 vfs_caches_init+0xcf/0xe0 start_kernel+0x58a/0x6a0 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0xc5/0xe0 secondary_startup_64_no_verify+0x178/0x17b other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(kernfs_idr_lock); local_irq_disable(); lock(&rq->__lock); lock(kernfs_idr_lock); <Interrupt> lock(&rq->__lock); *** DEADLOCK *** Prevent this deadlock condition converting kernfs_idr_lock to a raw irq safe spinlock. The performance impact of this change should be negligible and it also helps to prevent similar deadlock conditions with any other subsystems that may depend on kernfs. Fixes: 332ea1f ("bpf: Add bpf_cgroup_from_id() kfunc") Cc: stable <stable@kernel.org> Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20231229074916.53547-1-andrea.righi@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fc3a553 ] An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 deepin-community#1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 deepin-community#2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 deepin-community#3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 deepin-community#4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 deepin-community#5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () deepin-community#6 0x000000000087ad92 in tracing::span::Span::in_scope () deepin-community#7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () deepin-community#8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () deepin-community#9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com> Signed-off-by: Xin Liu <liuxin350@huawei.com> Signed-off-by: Changye Wu <wuchangye@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 817349b upstream. Upstream commit bac1ec5 ("usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK") introduced a new quirk in XHCI which fixes XHC timeout, which was seen on synopsys XHCs while using SG buffers. But the support for this quirk isn't present in the DWC3 layer. We will encounter this XHCI timeout/hung issue if we run iperf loopback tests using RTL8156 ethernet adaptor on DWC3 targets with scatter-gather enabled. This gets resolved after enabling the XHCI_SG_TRB_CACHE_SIZE_QUIRK. This patch enables it using the xhci device property since its needed for DWC3 controller. In Synopsys DWC3 databook, Table 9-3: xHCI Debug Capability Limitations Chained TRBs greater than TRB cache size: The debug capability driver must not create a multi-TRB TD that describes smaller than a 1K packet that spreads across 8 or more TRBs on either the IN TR or the OUT TR. Cc: stable@vger.kernel.org deepin-community#5.11 Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240116055816.1169821-2-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d3ea125 ] If CONFIG_HARDENED_USERCOPY is enabled, copying completion record from event log cache to user triggers a kernel bug. [ 1987.159822] usercopy: Kernel memory exposure attempt detected from SLUB object 'dsa0' (offset 74, size 31)! [ 1987.170845] ------------[ cut here ]------------ [ 1987.176086] kernel BUG at mm/usercopy.c:102! [ 1987.180946] invalid opcode: 0000 [deepin-community#1] PREEMPT SMP NOPTI [ 1987.186866] CPU: 17 PID: 528 Comm: kworker/17:1 Not tainted 6.8.0-rc2+ deepin-community#5 [ 1987.194537] Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023 [ 1987.206405] Workqueue: wq0.0 idxd_evl_fault_work [idxd] [ 1987.212338] RIP: 0010:usercopy_abort+0x72/0x90 [ 1987.217381] Code: 58 65 9c 50 48 c7 c2 17 85 61 9c 57 48 c7 c7 98 fd 6b 9c 48 0f 44 d6 48 c7 c6 b3 08 62 9c 4c 89 d1 49 0f 44 f3 e8 1e 2e d5 ff <0f> 0b 49 c7 c1 9e 42 61 9c 4c 89 cf 4d 89 c8 eb a9 66 66 2e 0f 1f [ 1987.238505] RSP: 0018:ff62f5cf20607d60 EFLAGS: 00010246 [ 1987.244423] RAX: 000000000000005f RBX: 000000000000001f RCX: 0000000000000000 [ 1987.252480] RDX: 0000000000000000 RSI: ffffffff9c61429e RDI: 00000000ffffffff [ 1987.260538] RBP: ff62f5cf20607d78 R08: ff2a6a89ef3fffe8 R09: 00000000fffeffff [ 1987.268595] R10: ff2a6a89eed00000 R11: 0000000000000003 R12: ff2a66934849c89a [ 1987.276652] R13: 0000000000000001 R14: ff2a66934849c8b9 R15: ff2a66934849c899 [ 1987.284710] FS: 0000000000000000(0000) GS:ff2a66b22fe40000(0000) knlGS:0000000000000000 [ 1987.293850] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1987.300355] CR2: 00007fe291a37000 CR3: 000000010fbd4005 CR4: 0000000000f71ef0 [ 1987.308413] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1987.316470] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 1987.324527] PKRU: 55555554 [ 1987.327622] Call Trace: [ 1987.330424] <TASK> [ 1987.332826] ? show_regs+0x6e/0x80 [ 1987.336703] ? die+0x3c/0xa0 [ 1987.339988] ? do_trap+0xd4/0xf0 [ 1987.343662] ? do_error_trap+0x75/0xa0 [ 1987.347922] ? usercopy_abort+0x72/0x90 [ 1987.352277] ? exc_invalid_op+0x57/0x80 [ 1987.356634] ? usercopy_abort+0x72/0x90 [ 1987.360988] ? asm_exc_invalid_op+0x1f/0x30 [ 1987.365734] ? usercopy_abort+0x72/0x90 [ 1987.370088] __check_heap_object+0xb7/0xd0 [ 1987.374739] __check_object_size+0x175/0x2d0 [ 1987.379588] idxd_copy_cr+0xa9/0x130 [idxd] [ 1987.384341] idxd_evl_fault_work+0x127/0x390 [idxd] [ 1987.389878] process_one_work+0x13e/0x300 [ 1987.394435] ? __pfx_worker_thread+0x10/0x10 [ 1987.399284] worker_thread+0x2f7/0x420 [ 1987.403544] ? _raw_spin_unlock_irqrestore+0x2b/0x50 [ 1987.409171] ? __pfx_worker_thread+0x10/0x10 [ 1987.414019] kthread+0x107/0x140 [ 1987.417693] ? __pfx_kthread+0x10/0x10 [ 1987.421954] ret_from_fork+0x3d/0x60 [ 1987.426019] ? __pfx_kthread+0x10/0x10 [ 1987.430281] ret_from_fork_asm+0x1b/0x30 [ 1987.434744] </TASK> The issue arises because event log cache is created using kmem_cache_create() which is not suitable for user copy. Fix the issue by creating event log cache with kmem_cache_create_usercopy(), ensuring safe user copy. Fixes: c2f156b ("dmaengine: idxd: create kmem cache for event log fault items") Reported-by: Tony Zhu <tony.zhu@intel.com> Tested-by: Tony Zhu <tony.zhu@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Lijun Pan <lijun.pan@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20240209191412.1050270-1-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…pty list [ Upstream commit 55b6c73 ] If all peers are removed via wg_peer_remove_all(), rather than setting peer_list to empty, the peer is added to a temporary list with a head on the stack of wg_peer_remove_all(). If a netlink dump is resumed and the cursored peer is one that has been removed via wg_peer_remove_all(), it will iterate from that peer and then attempt to dump freed peers. Fix this by instead checking peer->is_dead, which was explictly created for this purpose. Also move up the device_update_lock lockdep assertion, since reading is_dead relies on that. It can be reproduced by a small script like: echo "Setting config..." ip link add dev wg0 type wireguard wg setconf wg0 /big-config ( while true; do echo "Showing config..." wg showconf wg0 > /dev/null done ) & sleep 4 wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n") Resulting in: BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20 Read of size 8 at addr ffff88811956ec70 by task wg/59 CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ deepin-community#5 Call Trace: <TASK> dump_stack_lvl+0x47/0x70 print_address_description.constprop.0+0x2c/0x380 print_report+0xab/0x250 kasan_report+0xba/0xf0 __lock_acquire+0x182a/0x1b20 lock_acquire+0x191/0x4b0 down_read+0x80/0x440 get_peer+0x140/0xcb0 wg_get_device_dump+0x471/0x1130 Cc: stable@vger.kernel.org Fixes: e7096c1 ("net: WireGuard secure network tunnel") Reported-by: Lillian Berry <lillian@star-ark.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 4be9075 upstream. The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the corresponding ttm_resource_manager is not allocated. This leads to a crash when trying to read from this file. Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file only when the corresponding ttm_resource_manager is allocated. crash> bt PID: 3133409 TASK: ffff8fe4834a5000 CPU: 3 COMMAND: "grep" #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3 deepin-community#1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a deepin-community#2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1 deepin-community#3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1 deepin-community#4 [ffffb954506b3c70] no_context at ffffffffb2a7e913 deepin-community#5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c deepin-community#6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887 deepin-community#7 [ffffb954506b3d40] page_fault at ffffffffb360116e [exception RIP: ttm_resource_manager_debug+0x11] RIP: ffffffffc04afd11 RSP: ffffb954506b3df0 RFLAGS: 00010246 RAX: ffff8fe41a6d1200 RBX: 0000000000000000 RCX: 0000000000000940 RDX: 0000000000000000 RSI: ffffffffc04b4338 RDI: 0000000000000000 RBP: ffffb954506b3e08 R8: ffff8fee3ffad000 R9: 0000000000000000 R10: ffff8fe41a76a000 R11: 0000000000000001 R12: 00000000ffffffff R13: 0000000000000001 R14: ffff8fe5bb6f3900 R15: ffff8fe41a6d1200 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 deepin-community#8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm] deepin-community#9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3 RIP: 00007f4c4eda8985 RSP: 00007ffdbba9e9f8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 000000000037e000 RCX: 00007f4c4eda8985 RDX: 000000000037e000 RSI: 00007f4c41573000 RDI: 0000000000000003 RBP: 000000000037e000 R8: 0000000000000000 R9: 000000000037fe30 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4c41573000 R13: 0000000000000003 R14: 00007f4c41572010 R15: 0000000000000003 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: af4a25b ("drm/vmwgfx: Add debugfs entries for various ttm resource managers") Cc: <stable@vger.kernel.org> Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240312093551.196609-1-jfalempe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* cifs: make cifs_chan_update_iface() a void function [ Upstream commit 8d606c311b75e81063b4ea650b301cbe0c4ed5e1 ] The return values for cifs_chan_update_iface() didn't match what the documentation said and nothing was checking them anyway. Just make it a void function. Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Steve French <stfrench@microsoft.com> Stable-dep-of: 16a57d768111 ("cifs: reduce warning log level for server not advertising interfaces") Signed-off-by: Sasha Levin <sashal@kernel.org> * cifs: reduce warning log level for server not advertising interfaces [ Upstream commit 16a57d7681110b25708c7042688412238e6f73a9 ] Several users have reported this log getting dumped too regularly to kernel log. The likely root cause has been identified, and it suggests that this situation is expected for some configurations (for example SMB2.1). Since the function returns appropriately even for such cases, it is fairly harmless to make this a debug log. When needed, the verbosity can be increased to capture this log. Cc: stable@vger.kernel.org Reported-by: Jan Čermák <sairon@sairon.cz> Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * cifs: open_cached_dir(): add FILE_READ_EA to desired access [ Upstream commit f1b8224b4e6ed59e7e6f5c548673c67410098d8d ] Since smb2_query_eas() reads EA and uses cached directory, open_cached_dir() should request FILE_READ_EA access. Otherwise listxattr() and getxattr() will fail with EACCES (0xc0000022 STATUS_ACCESS_DENIED SMB status). Link: https://bugzilla.kernel.org/show_bug.cgi?id=218543 Cc: stable@vger.kernel.org Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * mtd: rawnand: Fix and simplify again the continuous read derivations [ Upstream commit c7ee7c8d4b60fe46d4861b1200bc1c7ab657960a ] We need to avoid the first page if we don't read it entirely. We need to avoid the last page if we don't read it entirely. While rather simple, this logic has been failed in the previous fix. This time I wrote about 30 unit tests locally to check each possible condition, hopefully I covered them all. Reported-by: Christophe Kerello <christophe.kerello@foss.st.com> Closes: https://lore.kernel.org/linux-mtd/20240221175327.42f7076d@xps-13/T/#m399bacb10db8f58f6b1f0149a1df867ec086bb0a Suggested-by: Christophe Kerello <christophe.kerello@foss.st.com> Fixes: 828f6df1bcba ("mtd: rawnand: Clarify conditions to enable continuous reads") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Christophe Kerello <christophe.kerello@foss.st.com> Link: https://lore.kernel.org/linux-mtd/20240223115545.354541-2-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org> * mtd: rawnand: Constrain even more when continuous reads are enabled [ Upstream commit 78ffbefba8d7822b232585570b293de5bc397da6 ] As a matter of fact, continuous reads require additional handling at the operation level in order for them to work properly. The core helpers do have this additional logic now, but any time a controller implements its own page helper, this extra logic is "lost". This means we need another level of per-controller driver checks to ensure they can leverage continuous reads. This is for now unsupported, so in order to ensure continuous reads are enabled only when fully using the core page helpers, we need to add more initial checks. Also, as performance is not relevant during raw accesses, we also prevent these from enabling the feature. This should solve the issue seen with controllers such as the STM32 FMC2 when in sequencer mode. In this case, the continuous read feature would be enabled but not leveraged, and most importantly not disabled, leading to further operations to fail. Reported-by: Christophe Kerello <christophe.kerello@foss.st.com> Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Christophe Kerello <christophe.kerello@foss.st.com> Link: https://lore.kernel.org/linux-mtd/20240307115315.1942678-1-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org> * cpufreq: dt: always allocate zeroed cpumask [ Upstream commit d2399501c2c081eac703ca9597ceb83c7875a537 ] Commit 0499a78369ad ("ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512") changed the handling of cpumasks on ARM 64bit, what resulted in the strange issues and warnings during cpufreq-dt initialization on some big.LITTLE platforms. This was caused by mixing OPPs between big and LITTLE cores, because OPP-sharing information between big and LITTLE cores is computed on cpumask, which in turn was not zeroed on allocation. Fix this by switching to zalloc_cpumask_var() call. Fixes: dc279ac6e5b4 ("cpufreq: dt: Refactor initialization to handle probe deferral properly") CC: stable@vger.kernel.org # v5.10+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Christoph Lameter (Ampere) <cl@linux.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * x86/CPU/AMD: Update the Zenbleed microcode revisions [ Upstream commit 5c84b051bd4e777cf37aaff983277e58c99618d5 ] Update them to the correct revision numbers. Fixes: 522b1d69219d ("x86/cpu/amd: Add a Zenbleed fix") Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * net: esp: fix bad handling of pages from page_pool [ Upstream commit c3198822c6cb9fb588e446540485669cc81c5d34 ] When the skb is reorganized during esp_output (!esp->inline), the pages coming from the original skb fragments are supposed to be released back to the system through put_page. But if the skb fragment pages are originating from a page_pool, calling put_page on them will trigger a page_pool leak which will eventually result in a crash. This leak can be easily observed when using CONFIG_DEBUG_VM and doing ipsec + gre (non offloaded) forwarding: BUG: Bad page state in process ksoftirqd/16 pfn:1451b6 page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6 flags: 0x200000000000000(node=0|zone=2) page_type: 0xffffffff() raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000 raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000 page dumped because: page_pool leak Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core] CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x36/0x50 bad_page+0x70/0xf0 free_unref_page_prepare+0x27a/0x460 free_unref_page+0x38/0x120 esp_ssg_unref.isra.0+0x15f/0x200 esp_output_tail+0x66d/0x780 esp_xmit+0x2c5/0x360 validate_xmit_xfrm+0x313/0x370 ? validate_xmit_skb+0x1d/0x330 validate_xmit_skb_list+0x4c/0x70 sch_direct_xmit+0x23e/0x350 __dev_queue_xmit+0x337/0xba0 ? nf_hook_slow+0x3f/0xd0 ip_finish_output2+0x25e/0x580 iptunnel_xmit+0x19b/0x240 ip_tunnel_xmit+0x5fb/0xb60 ipgre_xmit+0x14d/0x280 [ip_gre] dev_hard_start_xmit+0xc3/0x1c0 __dev_queue_xmit+0x208/0xba0 ? nf_hook_slow+0x3f/0xd0 ip_finish_output2+0x1ca/0x580 ip_sublist_rcv_finish+0x32/0x40 ip_sublist_rcv+0x1b2/0x1f0 ? ip_rcv_finish_core.constprop.0+0x460/0x460 ip_list_rcv+0x103/0x130 __netif_receive_skb_list_core+0x181/0x1e0 netif_receive_skb_list_internal+0x1b3/0x2c0 napi_gro_receive+0xc8/0x200 gro_cell_poll+0x52/0x90 __napi_poll+0x25/0x1a0 net_rx_action+0x28e/0x300 __do_softirq+0xc3/0x276 ? sort_range+0x20/0x20 run_ksoftirqd+0x1e/0x30 smpboot_thread_fn+0xa6/0x130 kthread+0xcd/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x31/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> The suggested fix is to introduce a new wrapper (skb_page_unref) that covers page refcounting for page_pool pages as well. Cc: stable@vger.kernel.org Fixes: 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling") Reported-and-tested-by: Anatoli N.Chechelnickiy <Anatoli.Chechelnickiy@m.interpipe.biz> Reported-by: Ian Kumlien <ian.kumlien@gmail.com> Link: https://lore.kernel.org/netdev/CAA85sZvvHtrpTQRqdaOx6gd55zPAVsqMYk_Lwh4Md5knTq7AyA@mail.gmail.com Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * NFSD: Fix nfsd_clid_class use of __string_len() macro [ Upstream commit 9388a2aa453321bcf1ad2603959debea9e6ab6d4 ] I'm working on restructuring the __string* macros so that it doesn't need to recalculate the string twice. That is, it will save it off when processing __string() and the __assign_str() will not need to do the work again as it currently does. Currently __string_len(item, src, len) doesn't actually use "src", but my changes will require src to be correct as that is where the __assign_str() will get its value from. The event class nfsd_clid_class has: __string_len(name, name, clp->cl_name.len) But the second "name" does not exist and causes my changes to fail to build. That second parameter should be: clp->cl_name.data. Link: https://lore.kernel.org/linux-trace-kernel/20240222122828.3d8d213c@gandalf.local.home Cc: Neil Brown <neilb@suse.de> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Tom Talpey <tom@talpey.com> Cc: stable@vger.kernel.org Fixes: d27b74a8675ca ("NFSD: Use new __string_len C macros for nfsd_clid_class") Acked-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/i915: Add missing ; to __assign_str() macros in tracepoint code [ Upstream commit 0df4c388a1e310400a6e90fb10b286e2673756f0 ] I'm working on improving the __assign_str() and __string() macros to be more efficient, and removed some unneeded semicolons. This triggered a bug in the build as some of the __assign_str() macros in intel_display_trace was missing a terminating semicolon. Link: https://lore.kernel.org/linux-trace-kernel/20240222133057.2af72a19@gandalf.local.home Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: stable@vger.kernel.org Fixes: 2ceea5d88048b ("drm/i915: Print plane name in fbc tracepoints") Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * net: hns3: tracing: fix hclgevf trace event strings [ Upstream commit 3f9952e8d80cca2da3b47ecd5ad9ec16cfd1a649 ] The __string() and __assign_str() helper macros of the TRACE_EVENT() macro are going through some optimizations where only the source string of __string() will be used and the __assign_str() source will be ignored and later removed. To make sure that there's no issues, a new check is added between the __string() src argument and the __assign_str() src argument that does a strcmp() to make sure they are the same string. The hclgevf trace events have: __assign_str(devname, &hdev->nic.kinfo.netdev->name); Which triggers the warning: hclgevf_trace.h:34:39: error: passing argument 1 of ‘strcmp’ from incompatible pointer type [-Werror=incompatible-pointer-types] 34 | __assign_str(devname, &hdev->nic.kinfo.netdev->name); [..] arch/x86/include/asm/string_64.h:75:24: note: expected ‘const char *’ but argument is of type ‘char (*)[16]’ 75 | int strcmp(const char *cs, const char *ct); | ~~~~~~~~~~~~^~ Because __assign_str() now has: WARN_ON_ONCE(__builtin_constant_p(src) ? \ strcmp((src), __data_offsets.dst##_ptr_) : \ (src) != __data_offsets.dst##_ptr_); \ The problem is the '&' on hdev->nic.kinfo.netdev->name. That's because that name is: char name[IFNAMSIZ] Where passing an address '&' of a char array is not compatible with strcmp(). The '&' is not necessary, remove it. Link: https://lore.kernel.org/linux-trace-kernel/20240313093454.3909afe7@gandalf.local.home Cc: netdev <netdev@vger.kernel.org> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Yufeng Mo <moyufeng@huawei.com> Cc: Huazhong Tan <tanhuazhong@huawei.com> Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Jijie Shao <shaojijie@huawei.com> Fixes: d8355240cf8fb ("net: hns3: add trace event support for PF/VF mailbox") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * cxl/trace: Properly initialize cxl_poison region name [ Upstream commit 6c871260965255a1c142fb77ccee58b172d1690b ] The TP_STRUCT__entry that gets assigned the region name, or an empty string if no region is present, is erroneously initialized to the cxl_region pointer. It needs to be properly initialized otherwise it's length is wrong and garbage chars can appear in the kernel trace output: /sys/kernel/tracing/trace The bad initialization was due in part to a naming conflict with the parameter: struct cxl_region *region. The field 'region' is already exposed externally as the region name, so changing that to something logical, like 'region_name' is not an option. Instead rename the internal only struct cxl_region to the commonly used 'cxlr'. Impact is that tooling depending on that trace data can miss picking up a valid event when searching by region name. The TP_printk() output, if enabled, does emit the correct region names in the dmesg log. This was found during testing of the cxl-list option to report media-errors for a region. Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: stable@vger.kernel.org Fixes: ddf49d57b841 ("cxl/trace: Add TRACE support for CXL media-error records") Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * virtio: reenable config if freezing device failed [ Upstream commit 310227f42882c52356b523e2f4e11690eebcd2ab ] Currently, we don't reenable the config if freezing the device failed. For example, virtio-mem currently doesn't support suspend+resume, and trying to freeze the device will always fail. Afterwards, the device will no longer respond to resize requests, because it won't get notified about config changes. Let's fix this by re-enabling the config if freezing fails. Fixes: 22b7050a024d ("virtio: defer config changed notifications") Cc: <stable@kernel.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20240213135425.795001-1-david@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * LoongArch: Change __my_cpu_offset definition to avoid mis-optimization [ Upstream commit c87e12e0e8c1241410e758e181ca6bf23efa5b5b ] From GCC commit 3f13154553f8546a ("df-scan: remove ad-hoc handling of global regs in asms"), global registers will no longer be forced to add to the def-use chain. Then current_thread_info(), current_stack_pointer and __my_cpu_offset may be lifted out of the loop because they are no longer treated as "volatile variables". This optimization is still correct for the current_thread_info() and current_stack_pointer usages because they are associated to a thread. However it is wrong for __my_cpu_offset because it is associated to a CPU rather than a thread: if the thread migrates to a different CPU in the loop, __my_cpu_offset should be changed. Change __my_cpu_offset definition to treat it as a "volatile variable", in order to avoid such a mis-optimization. Cc: stable@vger.kernel.org Reported-by: Xiaotian Wu <wuxiaotian@loongson.cn> Reported-by: Miao Wang <shankerwangmiao@gmail.com> Signed-off-by: Xing Li <lixing@loongson.cn> Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn> Signed-off-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Sasha Levin <sashal@kernel.org> * LoongArch: Define the __io_aw() hook as mmiowb() [ Upstream commit 9c68ece8b2a5c5ff9b2fcaea923dd73efeb174cd ] Commit fb24ea52f78e0d595852e ("drivers: Remove explicit invocations of mmiowb()") remove all mmiowb() in drivers, but it says: "NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation." The mmio in radeon_ring_commit() is protected by a mutex rather than a spinlock, but in the mutex fastpath it behaves similar to spinlock. We can add mmiowb() calls in the radeon driver but the maintainer says he doesn't like such a workaround, and radeon is not the only example of mutex protected mmio. So we should extend the mmiowb tracking system from spinlock to mutex, and maybe other locking primitives. This is not easy and error prone, so we solve it in the architectural code, by simply defining the __io_aw() hook as mmiowb(). And we no longer need to override queued_spin_unlock() so use the generic definition. Without this, we get such an error when run 'glxgears' on weak ordering architectures such as LoongArch: radeon 0000:04:00.0: ring 0 stalled for more than 10324msec radeon 0000:04:00.0: ring 3 stalled for more than 10240msec radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000001f412 last fence id 0x000000000001f414 on ring 3) radeon 0000:04:00.0: GPU lockup (current fence id 0x000000000000f940 last fence id 0x000000000000f941 on ring 0) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) radeon 0000:04:00.0: scheduling IB failed (-35). [drm:radeon_gem_va_ioctl [radeon]] *ERROR* Couldn't update BO_VA (-35) Link: https://lore.kernel.org/dri-devel/29df7e26-d7a8-4f67-b988-44353c4270ac@amd.com/T/#t Link: https://lore.kernel.org/linux-arch/20240301130532.3953167-1-chenhuacai@loongson.cn/T/#t Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Sasha Levin <sashal@kernel.org> * LoongArch/crypto: Clean up useless assignment operations [ Upstream commit fea1c949f6ca5059e12de00d0483645debc5b206 ] The LoongArch CRC32 hw acceleration is based on arch/mips/crypto/ crc32-mips.c. While the MIPS code supports both MIPS32 and MIPS64, but LoongArch32 lacks the CRC instruction. As a result, the line "len -= sizeof(u32)" is unnecessary. Removing it can make context code style more unified and improve code readability. Cc: stable@vger.kernel.org Reviewed-by: WANG Xuerui <git@xen0n.name> Suggested-by: Wentao Guan <guanwentao@uniontech.com> Signed-off-by: Yuli Wang <wangyuli@uniontech.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Sasha Levin <sashal@kernel.org> * wireguard: netlink: check for dangling peer via is_dead instead of empty list [ Upstream commit 55b6c738673871c9b0edae05d0c97995c1ff08c4 ] If all peers are removed via wg_peer_remove_all(), rather than setting peer_list to empty, the peer is added to a temporary list with a head on the stack of wg_peer_remove_all(). If a netlink dump is resumed and the cursored peer is one that has been removed via wg_peer_remove_all(), it will iterate from that peer and then attempt to dump freed peers. Fix this by instead checking peer->is_dead, which was explictly created for this purpose. Also move up the device_update_lock lockdep assertion, since reading is_dead relies on that. It can be reproduced by a small script like: echo "Setting config..." ip link add dev wg0 type wireguard wg setconf wg0 /big-config ( while true; do echo "Showing config..." wg showconf wg0 > /dev/null done ) & sleep 4 wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n") Resulting in: BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20 Read of size 8 at addr ffff88811956ec70 by task wg/59 CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5 Call Trace: <TASK> dump_stack_lvl+0x47/0x70 print_address_description.constprop.0+0x2c/0x380 print_report+0xab/0x250 kasan_report+0xba/0xf0 __lock_acquire+0x182a/0x1b20 lock_acquire+0x191/0x4b0 down_read+0x80/0x440 get_peer+0x140/0xcb0 wg_get_device_dump+0x471/0x1130 Cc: stable@vger.kernel.org Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Reported-by: Lillian Berry <lillian@star-ark.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * wireguard: netlink: access device through ctx instead of peer [ Upstream commit 71cbd32e3db82ea4a74e3ef9aeeaa6971969c86f ] The previous commit fixed a bug that led to a NULL peer->device being dereferenced. It's actually easier and faster performance-wise to instead get the device from ctx->wg. This semantically makes more sense too, since ctx->wg->peer_allowedips.seq is compared with ctx->allowedips_seq, basing them both in ctx. This also acts as a defence in depth provision against freed peers. Cc: stable@vger.kernel.org Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * wireguard: selftests: set RISCV_ISA_FALLBACK on riscv{32,64} [ Upstream commit e995f5dd9a9cef818af32ec60fc38d68614afd12 ] This option is needed to continue booting with QEMU. Recent changes that made this optional meant that it gets unset in the test harness, and so WireGuard CI has been broken. Fix this by simply setting this option. Cc: stable@vger.kernel.org Fixes: 496ea826d1e1 ("RISC-V: provide Kconfig & commandline options to control parsing "riscv,isa"") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * ahci: asm1064: correct count of reported ports [ Upstream commit 9815e39617541ef52d0dfac4be274ad378c6dc09 ] The ASM1064 SATA host controller always reports wrongly, that it has 24 ports. But in reality, it only has four ports. before: ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst after: ahci 0000:04:00.0: ASM1064 has only four ports ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst Signed-off-by: "Andrey Jr. Melnikov" <temnota.am@gmail.com> Signed-off-by: Niklas Cassel <cassel@kernel.org> Stable-dep-of: 6cd8adc3e189 ("ahci: asm1064: asm1166: don't limit reported ports") Signed-off-by: Sasha Levin <sashal@kernel.org> * ahci: asm1064: asm1166: don't limit reported ports [ Upstream commit 6cd8adc3e18960f6e59d797285ed34ef473cc896 ] Previously, patches have been added to limit the reported count of SATA ports for asm1064 and asm1166 SATA controllers, as those controllers do report more ports than physically having. While it is allowed to report more ports than physically having in CAP.NP, it is not allowed to report more ports than physically having in the PI (Ports Implemented) register, which is what these HBAs do. (This is a AHCI spec violation.) Unfortunately, it seems that the PMP implementation in these ASMedia HBAs is also violating the AHCI and SATA-IO PMP specification. What these HBAs do is that they do not report that they support PMP (CAP.SPM (Supports Port Multiplier) is not set). Instead, they have decided to add extra "virtual" ports in the PI register that is used if a port multiplier is connected to any of the physical ports of the HBA. Enumerating the devices behind the PMP as specified in the AHCI and SATA-IO specifications, by using PMP READ and PMP WRITE commands to the physical ports of the HBA is not possible, you have to use the "virtual" ports. This is of course bad, because this gives us no way to detect the device and vendor ID of the PMP actually connected to the HBA, which means that we can not apply the proper PMP quirks for the PMP that is connected to the HBA. Limiting the port map will thus stop these controllers from working with SATA Port Multipliers. This patch reverts both patches for asm1064 and asm1166, so old behavior is restored and SATA PMP will work again, but it will also reintroduce the (minutes long) extra boot time for the ASMedia controllers that do not have a PMP connected (either on the PCIe card itself, or an external PMP). However, a longer boot time for some, is the lesser evil compared to some other users not being able to detect their drives at all. Fixes: 0077a504e1a4 ("ahci: asm1166: correct count of reported ports") Fixes: 9815e3961754 ("ahci: asm1064: correct count of reported ports") Cc: stable@vger.kernel.org Reported-by: Matt <cryptearth@googlemail.com> Signed-off-by: Conrad Kostecki <conikost@gentoo.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> [cassel: rewrote commit message] Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/amdgpu: amdgpu_ttm_gart_bind set gtt bound flag [ Upstream commit 6c6064cbe58b43533e3451ad6a8ba9736c109ac3 ] Otherwise after the GTT bo is released, the GTT and gart space is freed but amdgpu_ttm_backend_unbind will not clear the gart page table entry and leave valid mapping entry pointing to the stale system page. Then if GPU access the gart address mistakely, it will read undefined value instead page fault, harder to debug and reproduce the real issue. Cc: stable@vger.kernel.org Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/amd/display: Return the correct HDCP error code [ Upstream commit e64b3f55e458ce7e2087a0051f47edabf74545e7 ] [WHY & HOW] If the display is null when creating an HDCP session, return a proper error code. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/amd/display: Fix noise issue on HDMI AV mute [ Upstream commit 69e3be6893a7e668660b05a966bead82bbddb01d ] [Why] When mode switching is triggered there is momentary noise visible on some HDMI TV or displays. [How] Wait for 2 frames to make sure we have enough time to send out AV mute and sink receives a full frame. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * dm snapshot: fix lockup in dm_exception_table_exit [ Upstream commit 6e7132ed3c07bd8a6ce3db4bb307ef2852b322dc ] There was reported lockup when we exit a snapshot with many exceptions. Fix this by adding "cond_resched" to the loop that frees the exceptions. Reported-by: John Pittman <jpittman@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * x86/pm: Work around false positive kmemleak report in msr_build_context() [ Upstream commit e3f269ed0accbb22aa8f25d2daffa23c3fccd407 ] Since: 7ee18d677989 ("x86/power: Make restore_processor_context() sane") kmemleak reports this issue: unreferenced object 0xf68241e0 (size 32): comm "swapper/0", pid 1, jiffies 4294668610 (age 68.432s) hex dump (first 32 bytes): 00 cc cc cc 29 10 01 c0 00 00 00 00 00 00 00 00 ....)........... 00 42 82 f6 cc cc cc cc cc cc cc cc cc cc cc cc .B.............. backtrace: [<461c1d50>] __kmem_cache_alloc_node+0x106/0x260 [<ea65e13b>] __kmalloc+0x54/0x160 [<c3858cd2>] msr_build_context.constprop.0+0x35/0x100 [<46635aff>] pm_check_save_msr+0x63/0x80 [<6b6bb938>] do_one_initcall+0x41/0x1f0 [<3f3add60>] kernel_init_freeable+0x199/0x1e8 [<3b538fde>] kernel_init+0x1a/0x110 [<938ae2b2>] ret_from_fork+0x1c/0x28 Which is a false positive. Reproducer: - Run rsync of whole kernel tree (multiple times if needed). - start a kmemleak scan - Note this is just an example: a lot of our internal tests hit these. The root cause is similar to the fix in: b0b592cf0836 x86/pm: Fix false positive kmemleak report in msr_build_context() ie. the alignment within the packed struct saved_context which has everything unaligned as there is only "u16 gs;" at start of struct where in the past there were four u16 there thus aligning everything afterwards. The issue is with the fact that Kmemleak only searches for pointers that are aligned (see how pointers are scanned in kmemleak.c) so when the struct members are not aligned it doesn't see them. Testing: We run a lot of tests with our CI, and after applying this fix we do not see any kmemleak issues any more whilst without it we see hundreds of the above report. From a single, simple test run consisting of 416 individual test cases on kernel 5.10 x86 with kmemleak enabled we got 20 failures due to this, which is quite a lot. With this fix applied we get zero kmemleak related failures. Fixes: 7ee18d677989 ("x86/power: Make restore_processor_context() sane") Signed-off-by: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Cc: stable@vger.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20240314142656.17699-1-anton@tuxera.com Signed-off-by: Sasha Levin <sashal@kernel.org> * wifi: brcmfmac: add per-vendor feature detection callback [ Upstream commit 14e1391b71027948cdbacdbea4bf8858c2068eb7 ] Adding a .feat_attach() callback allowing per-vendor overrides of the driver feature flags. In this patch the callback is only provided by BCA vendor to disable SAE feature as it has not been confirmed yet. BCA chips generally do not have the in-driver supplicant (idsup) feature so they rely on NL80211_CMD_EXTERNAL_AUTH to trigger user-space authentication. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103095704.135651-3-arend.vanspriel@broadcom.com Stable-dep-of: 85da8f71aaa7 ("wifi: brcmfmac: Demote vendor-specific attach/detach messages to info") Signed-off-by: Sasha Levin <sashal@kernel.org> * wifi: brcmfmac: cfg80211: Use WSEC to set SAE password [ Upstream commit 9f7861c56b51b84d30114e7fea9d744a9d5ba9b7 ] Using the WSEC command instead of sae_password seems to be the supported mechanism on newer firmware, and also how the brcmdhd driver does it. The existing firmware mechanism intended for (some) Cypress chips has been separated from the new firmware mechanism using the multi-vendor framework. Depending on the device it will select the appropriate firmware mechanism. This makes WPA3 work with iwd, or with wpa_supplicant pending a support patchset [2]. [1] https://rachelbythebay.com/w/2023/11/06/wpa3/ [2] http://lists.infradead.org/pipermail/hostap/2023-July/041653.html Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Neal Gompa <neal@gompa.dev> [arend.vanspriel@broadcom.com: use multi-vendor framework] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103095704.135651-5-arend.vanspriel@broadcom.com Stable-dep-of: 85da8f71aaa7 ("wifi: brcmfmac: Demote vendor-specific attach/detach messages to info") Signed-off-by: Sasha Levin <sashal@kernel.org> * wifi: brcmfmac: Demote vendor-specific attach/detach messages to info [ Upstream commit 85da8f71aaa7b83ea7ef0e89182e0cd47e16d465 ] People are getting spooked by brcmfmac errors on their boot console. There's no reason for these messages to be errors. Cc: stable@vger.kernel.org # 6.2.x Fixes: d6a5c562214f ("wifi: brcmfmac: add support for vendor-specific firmware api") Signed-off-by: Hector Martin <marcan@marcan.st> [arend.vanspriel@broadcom.com: remove attach/detach vendor callbacks] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240106103835.269149-2-arend.vanspriel@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/ttm: Make sure the mapped tt pages are decrypted when needed [ Upstream commit 71ce046327cfd3aef3f93d1c44e091395eb03f8f ] Some drivers require the mapped tt pages to be decrypted. In an ideal world this would have been handled by the dma layer, but the TTM page fault handling would have to be rewritten to able to do that. A side-effect of the TTM page fault handling is using a dma allocation per order (via ttm_pool_alloc_page) which makes it impossible to just trivially use dma_mmap_attrs. As a result ttm has to be very careful about trying to make its pgprot for the mapped tt pages match what the dma layer thinks it is. At the ttm layer it's possible to deduce the requirement to have tt pages decrypted by checking whether coherent dma allocations have been requested and the system is running with confidential computing technologies. This approach isn't ideal but keeping TTM matching DMAs expectations for the page properties is in general fragile, unfortunately proper fix would require a rewrite of TTM's page fault handling. Fixes vmwgfx with SEV enabled. v2: Explicitly include cc_platform.h v3: Use CC_ATTR_GUEST_MEM_ENCRYPT instead of CC_ATTR_MEM_ENCRYPT to limit the scope to guests and log when memory decryption is enabled. Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Fixes: 3bf3710e3718 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem") Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Acked-by: Christian König <christian.koenig@amd.com> Cc: Huang Rui <ray.huang@amd.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> # v5.14+ Link: https://patchwork.freedesktop.org/patch/msgid/20230926040359.3040017-1-zack@kde.org Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/bridge: add ->edid_read hook and drm_bridge_edid_read() [ Upstream commit d807ad80d811ba0c22adfd871e2a46491f80d6e2 ] Add new struct drm_edid based ->edid_read hook and drm_bridge_edid_read() function to call the hook. v2: Include drm/drm_edid.h Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/9d08d22eaffcb9c59a2b677e45d7e61fc689bc2f.1706038510.git.jani.nikula@intel.com Stable-dep-of: 171b711b26cc ("drm/bridge: lt8912b: do not return negative values from .get_modes()") Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/bridge: lt8912b: use drm_bridge_edid_read() [ Upstream commit 60d1fe1a7f302cc1151b155ac2d134db59bb1420 ] Prefer using the struct drm_edid based functions. cc: Adrien Grassein <adrien.grassein@gmail.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/32c9b52fe6fa7cbad6bfd0ff00041876977e02ea.1706038510.git.jani.nikula@intel.com Stable-dep-of: 171b711b26cc ("drm/bridge: lt8912b: do not return negative values from .get_modes()") Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/bridge: lt8912b: clear the EDID property on failures [ Upstream commit 29e032296da5d6294378ffa8bad8e976c5aadbf5 ] If EDID read fails, clear the EDID property. Cc: Adrien Grassein <adrien.grassein@gmail.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/2080adaadf4bba3d85f58c42c065caf9aad9a4ef.1706038510.git.jani.nikula@intel.com Stable-dep-of: 171b711b26cc ("drm/bridge: lt8912b: do not return negative values from .get_modes()") Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/bridge: lt8912b: do not return negative values from .get_modes() [ Upstream commit 171b711b26cce208bb628526b1b368aeec7b6fa4 ] The .get_modes() hooks aren't supposed to return negative error codes. Return 0 for no modes, whatever the reason. Cc: Adrien Grassein <adrien.grassein@gmail.com> Cc: stable@vger.kernel.org Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/dcdddcbcb64b6f6cdc55022ee50c10dee8ddbc3d.1709913674.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * workqueue: Shorten events_freezable_power_efficient name commit 8318d6a6362f5903edb4c904a8dd447e59be4ad1 upstream. Since we have set the WQ_NAME_LEN to 32, decrease the name of events_freezable_power_efficient so that it does not trip the name length warning when the workqueue is created. Signed-off-by: Audra Mitchell <audra@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * drm/amd/display: Use freesync when `DRM_EDID_FEATURE_CONTINUOUS_FREQ` found commit 2f14c0c8cae8e9e3b603a3f91909baba66540027 upstream. The monitor shipped with the Framework 16 supports VRR [1], but it's not being advertised. This is because the detailed timing block doesn't contain `EDID_DETAIL_MONITOR_RANGE` which amdgpu looks for to find min and max frequencies. This check however is superfluous for this case because update_display_info() calls drm_get_monitor_range() to get these ranges already. So if the `DRM_EDID_FEATURE_CONTINUOUS_FREQ` EDID feature is found then turn on freesync without extra checks. v2: squash in fix from Harry Closes: https://www.reddit.com/r/framework/comments/1b4y2i5/no_variable_refresh_rate_on_the_framework_16_on/ Closes: https://www.reddit.com/r/framework/comments/1b6vzcy/framework_16_variable_refresh_rate/ Closes: https://community.frame.work/t/resolved-no-vrr-freesync-with-amd-version/42338 Link: https://gist.github.com/superm1/e8fbacfa4d0f53150231d3a3e0a13faf Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * net: fix IPSTATS_MIB_OUTPKGS increment in OutForwDatagrams. commit b4a11b2033b7d3dfdd46592f7036a775b18cecd1 upstream. Reproduce environment: network with 3 VM linuxs is connected as below: VM1<---->VM2(latest kernel 6.5.0-rc7)<---->VM3 VM1: eth0 ip: 192.168.122.207 MTU 1500 VM2: eth0 ip: 192.168.122.208, eth1 ip: 192.168.123.224 MTU 1500 VM3: eth0 ip: 192.168.123.240 MTU 1500 Reproduce: VM1 send 1400 bytes UDP data to VM3 using tools scapy with flags=0. scapy command: send(IP(dst="192.168.123.240",flags=0)/UDP()/str('0'*1400),count=1, inter=1.000000) Result: Before IP data is sent. ---------------------------------------------------------------------- root@qemux86-64:~# cat /proc/net/snmp Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails FragOKs FragFails FragCreates Ip: 1 64 11 0 3 4 0 0 4 7 0 0 0 0 0 0 0 0 0 ...... ---------------------------------------------------------------------- After IP data is sent. ---------------------------------------------------------------------- root@qemux86-64:~# cat /proc/net/snmp Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails FragOKs FragFails FragCreates Ip: 1 64 12 0 3 5 0 0 4 8 0 0 0 0 0 0 0 0 0 ...... ---------------------------------------------------------------------- "ForwDatagrams" increase from 4 to 5 and "OutRequests" also increase from 7 to 8. Issue description and patch: IPSTATS_MIB_OUTPKTS("OutRequests") is counted with IPSTATS_MIB_OUTOCTETS ("OutOctets") in ip_finish_output2(). According to RFC 4293, it is "OutOctets" counted with "OutTransmits" but not "OutRequests". "OutRequests" does not include any datagrams counted in "ForwDatagrams". ipSystemStatsOutOctets OBJECT-TYPE DESCRIPTION "The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in ipIfStatsOutTransmits MUST be counted here. ipSystemStatsOutRequests OBJECT-TYPE DESCRIPTION "The total number of IP datagrams that local IP user- protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipSystemStatsOutForwDatagrams. So do patch to define IPSTATS_MIB_OUTPKTS to "OutTransmits" and add IPSTATS_MIB_OUTREQUESTS for "OutRequests". Add IPSTATS_MIB_OUTREQUESTS counter in __ip_local_out() for ipv4 and add IPSTATS_MIB_OUT counter in ip6_finish_output2() for ipv6. Test result with patch: Before IP data is sent. ---------------------------------------------------------------------- root@qemux86-64:~# cat /proc/net/snmp Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails FragOKs FragFails FragCreates OutTransmits Ip: 1 64 9 0 5 1 0 0 3 3 0 0 0 0 0 0 0 0 0 4 ...... root@qemux86-64:~# cat /proc/net/netstat ...... IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts InECT0Pkts InCEPkts ReasmOverlaps IpExt: 0 0 0 0 0 0 2976 1896 0 0 0 0 0 9 0 0 0 0 ---------------------------------------------------------------------- After IP data is sent. ---------------------------------------------------------------------- root@qemux86-64:~# cat /proc/net/snmp Ip: Forwarding DefaultTTL InReceives InHdrErrors InAddrErrors ForwDatagrams InUnknownProtos InDiscards InDelivers OutRequests OutDiscards OutNoRoutes ReasmTimeout ReasmReqds ReasmOKs ReasmFails FragOKs FragFails FragCreates OutTransmits Ip: 1 64 10 0 5 2 0 0 3 3 0 0 0 0 0 0 0 0 0 5 ...... root@qemux86-64:~# cat /proc/net/netstat ...... IpExt: InNoRoutes InTruncatedPkts InMcastPkts OutMcastPkts InBcastPkts OutBcastPkts InOctets OutOctets InMcastOctets OutMcastOctets InBcastOctets OutBcastOctets InCsumErrors InNoECTPkts InECT1Pkts InECT0Pkts InCEPkts ReasmOverlaps IpExt: 0 0 0 0 0 0 4404 3324 0 0 0 0 0 10 0 0 0 0 ---------------------------------------------------------------------- "ForwDatagrams" increase from 1 to 2 and "OutRequests" is keeping 3. "OutTransmits" increase from 4 to 5 and "OutOctets" increase 1428. Signed-off-by: Heng Guo <heng.guo@windriver.com> Reviewed-by: Kun Song <Kun.Song@windriver.com> Reviewed-by: Filip Pudak <filip.pudak@windriver.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Reported-by: Vitezslav Samel <vitezslav@samel.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout commit 552705a3650bbf46a22b1adedc1b04181490fc36 upstream. While the rhashtable set gc runs asynchronously, a race allows it to collect elements from anonymous sets with timeouts while it is being released from the commit path. Mingi Cho originally reported this issue in a different path in 6.1.x with a pipapo set with low timeouts which is not possible upstream since 7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set element timeout"). Fix this by setting on the dead flag for anonymous sets to skip async gc in this case. According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on transaction abort"), Florian plans to accelerate abort path by releasing objects via workqueue, therefore, this sets on the dead flag for abort path too. Cc: stable@vger.kernel.org Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Reported-by: Mingi Cho <mgcho.minic@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * netfilter: nf_tables: disallow anonymous set with timeout flag commit 16603605b667b70da974bea8216c93e7db043bf1 upstream. Anonymous sets are never used with timeout from userspace, reject this. Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work. Cc: stable@vger.kernel.org Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support") Reported-by: lonial con <kongln9170@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * netfilter: nf_tables: reject constant set with timeout commit 5f4fc4bd5cddb4770ab120ce44f02695c4505562 upstream. This set combination is weird: it allows for elements to be added/deleted, but once bound to the rule it cannot be updated anymore. Eventually, all elements expire, leading to an empty set which cannot be updated anymore. Reject this flags combination. Cc: stable@vger.kernel.org Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memory commit b8209544296edbd1af186e2ea9c648642c37b18c upstream. The VMBUS_RING_SIZE macro adds space for a ring buffer header to the requested ring buffer size. The header size is always 1 page, and so its size varies based on the PAGE_SIZE for which the kernel is built. If the requested ring buffer size is a large power-of-2 size and the header size is small, the resulting size is inefficient in its use of memory. For example, a 512 Kbyte ring buffer with a 4 Kbyte page size results in a 516 Kbyte allocation, which is rounded to up 1 Mbyte by the memory allocator, and wastes 508 Kbytes of memory. In such situations, the exact size of the ring buffer isn't that important, and it's OK to allocate the 4 Kbyte header at the beginning of the 512 Kbytes, leaving the ring buffer itself with just 508 Kbytes. The memory allocation can be 512 Kbytes instead of 1 Mbyte and nothing is wasted. Update VMBUS_RING_SIZE to implement this approach for "large" ring buffer sizes. "Large" is somewhat arbitrarily defined as 8 times the size of the ring buffer header (which is of size PAGE_SIZE). For example, for 4 Kbyte PAGE_SIZE, ring buffers of 32 Kbytes and larger use the first 4 Kbytes as the ring buffer header. For 64 Kbyte PAGE_SIZE, ring buffers of 512 Kbytes and larger use the first 64 Kbytes as the ring buffer header. In both cases, smaller sizes add space for the header so the ring size isn't reduced too much by using part of the space for the header. For example, with a 64 Kbyte page size, we don't want a 128 Kbyte ring buffer to be reduced to 64 Kbytes by allocating half of the space for the header. In such a case, the memory allocation is less efficient, but it's the best that can be done. While the new algorithm slightly changes the amount of space allocated for ring buffers by drivers that use VMBUS_RING_SIZE, the devices aren't known to be sensitive to small changes in ring buffer size, so there shouldn't be any effect. Fixes: c1135c7fd0e9 ("Drivers: hv: vmbus: Introduce types of GPADL") Fixes: 6941f67ad37d ("hv_netvsc: Calculate correct ring size when PAGE_SIZE is not 4 Kbytes") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218502 Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Tested-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Link: https://lore.kernel.org/r/20240229004533.313662-1-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20240229004533.313662-1-mhklinux@outlook.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * nouveau: lock the client object tree. commit b7cc4ff787a572edf2c55caeffaa88cd801eb135 upstream. It appears the client object tree has no locking unless I've missed something else. Fix races around adding/removing client objects, mostly vram bar mappings. 4562.099306] general protection fault, probably for non-canonical address 0x6677ed422bceb80c: 0000 [#1] PREEMPT SMP PTI [ 4562.099314] CPU: 2 PID: 23171 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 [ 4562.099324] Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 [ 4562.099330] RIP: 0010:nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099503] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 48 89 f8 48 85 f6 74 39 48 8b 87 a0 00 00 00 48 85 c0 74 12 <48> 8b 48 f8 48 39 ce 73 15 48 8b 40 10 48 85 c0 75 ee 48 c7 c0 fe [ 4562.099506] RSP: 0000:ffffa94cc420bbf8 EFLAGS: 00010206 [ 4562.099512] RAX: 6677ed422bceb814 RBX: ffff98108791f400 RCX: ffff9810f26b8f58 [ 4562.099517] RDX: 0000000000000000 RSI: ffff9810f26b9158 RDI: ffff98108791f400 [ 4562.099519] RBP: ffff9810f26b9158 R08: 0000000000000000 R09: 0000000000000000 [ 4562.099521] R10: ffffa94cc420bc48 R11: 0000000000000001 R12: ffff9810f02a7cc0 [ 4562.099526] R13: 0000000000000000 R14: 00000000000000ff R15: 0000000000000007 [ 4562.099528] FS: 00007f629c5017c0(0000) GS:ffff98142c700000(0000) knlGS:0000000000000000 [ 4562.099534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4562.099536] CR2: 00007f629a882000 CR3: 000000017019e004 CR4: 00000000003706f0 [ 4562.099541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4562.099542] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4562.099544] Call Trace: [ 4562.099555] <TASK> [ 4562.099573] ? die_addr+0x36/0x90 [ 4562.099583] ? exc_general_protection+0x246/0x4a0 [ 4562.099593] ? asm_exc_general_protection+0x26/0x30 [ 4562.099600] ? nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099730] nvkm_ioctl+0xa1/0x250 [nouveau] [ 4562.099861] nvif_object_map_handle+0xc8/0x180 [nouveau] [ 4562.099986] nouveau_ttm_io_mem_reserve+0x122/0x270 [nouveau] [ 4562.100156] ? dma_resv_test_signaled+0x26/0xb0 [ 4562.100163] ttm_bo_vm_fault_reserved+0x97/0x3c0 [ttm] [ 4562.100182] ? __mutex_unlock_slowpath+0x2a/0x270 [ 4562.100189] nouveau_ttm_fault+0x69/0xb0 [nouveau] [ 4562.100356] __do_fault+0x32/0x150 [ 4562.100362] do_fault+0x7c/0x560 [ 4562.100369] __handle_mm_fault+0x800/0xc10 [ 4562.100382] handle_mm_fault+0x17c/0x3e0 [ 4562.100388] do_user_addr_fault+0x208/0x860 [ 4562.100395] exc_page_fault+0x7f/0x200 [ 4562.100402] asm_exc_page_fault+0x26/0x30 [ 4562.100412] RIP: 0033:0x9b9870 [ 4562.100419] Code: 85 a8 f7 ff ff 8b 8d 80 f7 ff ff 89 08 e9 18 f2 ff ff 0f 1f 84 00 00 00 00 00 44 89 32 e9 90 fa ff ff 0f 1f 84 00 00 00 00 00 <44> 89 32 e9 f8 f1 ff ff 0f 1f 84 00 00 00 00 00 66 44 89 32 e9 e7 [ 4562.100422] RSP: 002b:00007fff9ba2dc70 EFLAGS: 00010246 [ 4562.100426] RAX: 0000000000000004 RBX: 000000000dd65e10 RCX: 000000fff0000000 [ 4562.100428] RDX: 00007f629a882000 RSI: 00007f629a882000 RDI: 0000000000000066 [ 4562.100432] RBP: 00007fff9ba2e570 R08: 0000000000000000 R09: 0000000123ddf000 [ 4562.100434] R10: 0000000000000001 R11: 0000000000000246 R12: 000000007fffffff [ 4562.100436] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 4562.100446] </TASK> [ 4562.100448] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink cmac bnep sunrpc iwlmvm intel_rapl_msr intel_rapl_common snd_sof_pci_intel_cnl x86_pkg_temp_thermal intel_powerclamp snd_sof_intel_hda_common mac80211 coretemp snd_soc_acpi_intel_match kvm_intel snd_soc_acpi snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda_mlink snd_sof_intel_hda snd_sof kvm snd_sof_utils snd_soc_core snd_hda_codec_realtek libarc4 snd_hda_codec_generic snd_compress snd_hda_ext_core vfat fat snd_hda_intel snd_intel_dspcfg irqbypass iwlwifi snd_hda_codec snd_hwdep snd_hda_core btusb btrtl mei_hdcp iTCO_wdt rapl mei_pxp btintel snd_seq iTCO_vendor_support btbcm snd_seq_device intel_cstate bluetooth snd_pcm cfg80211 intel_wmi_thunderbolt wmi_bmof intel_uncore snd_timer mei_me snd ecdh_generic i2c_i801 [ 4562.100541] ecc mei i2c_smbus soundcore rfkill intel_pch_thermal acpi_pad zram nouveau drm_ttm_helper ttm gpu_sched i2c_algo_bit drm_gpuvm drm_exec mxm_wmi drm_display_helper drm_kms_helper drm crct10dif_pclmul crc32_pclmul nvme e1000e crc32c_intel nvme_core ghash_clmulni_intel video wmi pinctrl_cannonlake ip6_tables ip_tables fuse [ 4562.100616] ---[ end trace 0000000000000000 ]--- Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * drm/nouveau: fix stale locked mutex in nouveau_gem_ioctl_pushbuf commit daf8739c3322a762ce84f240f50e0c39181a41ab upstream. If VM_BIND is enabled on the client the legacy submission ioctl can't be used, however if a client tries to do so regardless it will return an error. In this case the clients mutex remained unlocked leading to a deadlock inside nouveau_drm_postclose or any other nouveau ioctl call. Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI") Cc: Danilo Krummrich <dakr@redhat.com> Cc: <stable@vger.kernel.org> # v6.6+ Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240305133853.2214268-1-kherbst@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * crypto: rk3288 - Fix use after free in unprepare commit c0afb6b88fbbc177fa322a835f874be217bffe45 upstream. The unprepare call must be carried out before the finalize call as the latter can free the request. Fixes: c66c17a0f69b ("crypto: rk3288 - Remove prepare/unprepare request") Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * crypto: sun8i-ce - Fix use after free in unprepare commit 183420038444547c149a0fc5f58e792c2752860c upstream. sun8i_ce_cipher_unprepare should be called before crypto_finalize_skcipher_request, because client callbacks may immediately free memory, that isn't needed anymore. But it will be used by unprepare after free. Before removing prepare/unprepare callbacks it was handled by crypto engine in crypto_finalize_request. Usually that results in a pointer dereference problem during a in crypto selftest. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000004716d000 [0000000000000030] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP This problem is detected by KASAN as well. ================================================================== BUG: KASAN: slab-use-after-free in sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce] Read of size 8 at addr ffff00000dcdc040 by task 1c15000.crypto-/373 Hardware name: Pine64 PinePhone (1.2) (DT) Call trace: dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5d8 kasan_report+0x90/0xd0 __asan_load8+0x9c/0xc0 sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce] crypto_pump_work+0x354/0x620 [crypto_engine] kthread_worker_fn+0x244/0x498 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Allocated by task 379: kasan_save_stack+0x3c/0x68 kasan_set_track+0x2c/0x40 kasan_save_alloc_info+0x24/0x38 __kasan_kmalloc+0xd4/0xd8 __kmalloc+0x74/0x1d0 alg_test_skcipher+0x90/0x1f0 alg_test+0x24c/0x830 cryptomgr_test+0x38/0x60 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Freed by task 379: kasan_save_stack+0x3c/0x68 kasan_set_track+0x2c/0x40 kasan_save_free_info+0x38/0x60 __kasan_slab_free+0x100/0x170 slab_free_freelist_hook+0xd4/0x1e8 __kmem_cache_free+0x15c/0x290 kfree+0x74/0x100 kfree_sensitive+0x80/0xb0 alg_test_skcipher+0x12c/0x1f0 alg_test+0x24c/0x830 cryptomgr_test+0x38/0x60 kthread+0x168/0x178 ret_from_fork+0x10/0x20 The buggy address belongs to the object at ffff00000dcdc000 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 64 bytes inside of freed 256-byte region [ffff00000dcdc000, ffff00000dcdc100) Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Fixes: 4136212ab18e ("crypto: sun8i-ce - Remove prepare/unprepare request") Cc: <stable@vger.kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * xfrm: Avoid clang fortify warning in copy_to_user_tmpl() commit 1a807e46aa93ebad1dfbed4f82dc3bf779423a6e upstream. After a couple recent changes in LLVM, there is a warning (or error with CONFIG_WERROR=y or W=e) from the compile time fortify source routines, specifically the memset() in copy_to_user_tmpl(). In file included from net/xfrm/xfrm_user.c:14: ... include/linux/fortify-string.h:438:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning] 438 | __write_overflow_field(p_size_field, size); | ^ 1 error generated. While ->xfrm_nr has been validated against XFRM_MAX_DEPTH when its value is first assigned in copy_templates() by calling validate_tmpl() first (so there should not be any issue in practice), LLVM/clang cannot really deduce that across the boundaries of these functions. Without that knowledge, it cannot assume that the loop stops before i is greater than XFRM_MAX_DEPTH, which would indeed result a stack buffer overflow in the memset(). To make the bounds of ->xfrm_nr clear to the compiler and add additional defense in case copy_to_user_tmpl() is ever used in a path where ->xfrm_nr has not been properly validated against XFRM_MAX_DEPTH first, add an explicit bound check and early return, which clears up the warning. Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/1985 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * mm, mmap: fix vma_merge() case 7 with vma_ops->close commit fc0c8f9089c20d198d8fe51ddc28bfa1af588dce upstream. When debugging issues with a workload using SysV shmem, Michal Hocko has come up with a reproducer that shows how a series of mprotect() operations can result in an elevated shm_nattch and thus leak of the resource. The problem is caused by wrong assumptions in vma_merge() commit 714965ca8252 ("mm/mmap: start distinguishing if vma can be removed in mergeability test"). The shmem vmas have a vma_ops->close callback that decrements shm_nattch, and we remove the vma without calling it. vma_merge() has thus historically avoided merging vma's with vma_ops->close and commit 714965ca8252 was supposed to keep it that way. It relaxed the checks for vma_ops->close in can_vma_merge_after() assuming that it is never called on a vma that would be a candidate for…

* ASoC: Intel: common: DMI remap for rebranded Intel NUC M15 (LAPRC710) laptops [ Upstream commit c13e03126a5be90781084437689724254c8226e1 ] Added DMI quirk to handle the rebranded variants of Intel NUC M15 (LAPRC710) laptops. The DMI matching is based on motherboard attributes. Link: https://github.com/thesofproject/linux/issues/4218 Signed-off-by: Máté Mosonyi <mosomate@gmail.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240208165545.93811-20-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * rcu/nocb: Fix WARN_ON_ONCE() in the rcu_nocb_bypass_lock() [ Upstream commit dda98810b552fc6bf650f4270edeebdc2f28bd3f ] For the kernels built with CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y and CONFIG_RCU_LAZY=y, the following scenarios will trigger WARN_ON_ONCE() in the rcu_nocb_bypass_lock() and rcu_nocb_wait_contended() functions: CPU2 CPU11 kthread rcu_nocb_cb_kthread ksys_write rcu_do_batch vfs_write rcu_torture_timer_cb proc_sys_write __kmem_cache_free proc_sys_call_handler kmemleak_free drop_caches_sysctl_handler delete_object_full drop_slab __delete_object shrink_slab put_object lazy_rcu_shrink_scan call_rcu rcu_nocb_flush_bypass __call_rcu_commn rcu_nocb_bypass_lock raw_spin_trylock(&rdp->nocb_bypass_lock) fail atomic_inc(&rdp->nocb_lock_contended); rcu_nocb_wait_contended WARN_ON_ONCE(smp_processor_id() != rdp->cpu); WARN_ON_ONCE(atomic_read(&rdp->nocb_lock_contended)) | |_ _ _ _ _ _ _ _ _ _same rdp and rdp->cpu != 11_ _ _ _ _ _ _ _ _ __| Reproduce this bug with "echo 3 > /proc/sys/vm/drop_caches". This commit therefore uses rcu_nocb_try_flush_bypass() instead of rcu_nocb_flush_bypass() in lazy_rcu_shrink_scan(). If the nocb_bypass queue is being flushed, then rcu_nocb_try_flush_bypass will return directly. Signed-off-by: Zqiang <qiang.zhang1211@gmail.com> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * rcu-tasks: Repair RCU Tasks Trace quiescence check [ Upstream commit 2eb52fa8900e642b3b5054c4bf9776089d2a935f ] The context-switch-time check for RCU Tasks Trace quiescence expects current->trc_reader_special.b.need_qs to be zero, and if so, updates it to TRC_NEED_QS_CHECKED. This is backwards, because if this value is zero, there is no RCU Tasks Trace grace period in flight, an thus no need for a quiescent state. Instead, when a grace period starts, this field is set to TRC_NEED_QS. This commit therefore changes the check from zero to TRC_NEED_QS. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * Julia Lawall reported this null pointer dereference, this should fix it. [ Upstream commit 9bf93dcfc453fae192fe5d7874b89699e8f800ac ] Signed-off-by: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * media: sta2x11: fix irq handler cast [ Upstream commit 3de49ae81c3a0f83a554ecbce4c08e019f30168e ] clang-16 warns about casting incompatible function pointers: drivers/media/pci/sta2x11/sta2x11_vip.c:1057:6: error: cast from 'irqreturn_t (*)(int, struct sta2x11_vip *)' (aka 'enum irqreturn (*)(int, struct sta2x11_vip *)') to 'irq_handler_t' (aka 'enum irqreturn (*)(int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] Change the prototype of the irq handler to the regular version with a local variable to adjust the argument type. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil: update argument documentation] Signed-off-by: Sasha Levin <sashal@kernel.org> * ALSA: firewire-lib: handle quirk to calculate payload quadlets as data block counter [ Upstream commit 4a486439d2ca85752c46711f373b6ddc107bb35d ] Miglia Harmony Audio (OXFW970) has a quirk to put the number of accumulated quadlets in CIP payload into the dbc field of CIP header. This commit handles the quirk in the packet processing layer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20240218074128.95210-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/panel: simple: Add BOE BP082WX1-100 8.2" panel [ Upstream commit dc90214ff58be575fdceb549f901506cdef5d093 ] The BOE BP082WX1-100 is a 8.2" panel similar to the 10.1" panel BP101WX1-100. Both panels use the same timings. Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240211111703.7567-2-tony@atomide.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240211111703.7567-2-tony@atomide.com Signed-off-by: Sasha Levin <sashal@kernel.org> * x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o [ Upstream commit b388e57d4628eb22782bdad4cd5b83ca87a1b7c9 ] For CONFIG_RETHUNK kernels, objtool annotates all the function return sites so they can be patched during boot. By design, after apply_returns() is called, all tail-calls to the compiler-generated default return thunk (__x86_return_thunk) should be patched out and replaced with whatever's needed for any mitigations (or lack thereof). The commit 4461438a8405 ("x86/retpoline: Ensure default return thunk isn't used at runtime") adds a runtime check and a WARN_ONCE() if the default return thunk ever gets executed after alternatives have been applied. This warning is a sanity check to make sure objtool and apply_returns() are doing their job. As Nathan reported, that check found something: Unpatched return thunk in use. This should not happen! WARNING: CPU: 0 PID: 1 at arch/x86/kernel/cpu/bugs.c:2856 __warn_thunk+0x27/0x40 RIP: 0010:__warn_thunk+0x27/0x40 Call Trace: <TASK> ? show_regs ? __warn ? __warn_thunk ? report_bug ? console_unlock ? handle_bug ? exc_invalid_op ? asm_exc_invalid_op ? ia32_binfmt_init ? __warn_thunk warn_thunk_thunk do_one_initcall kernel_init_freeable ? __pfx_kernel_init kernel_init ret_from_fork ? __pfx_kernel_init ret_from_fork_asm </TASK> Boris debugged to find that the unpatched return site was in init_vdso_image_64(), and its translation unit wasn't being analyzed by objtool, so it never got annotated. So it got ignored by apply_returns(). This is only a minor issue, as this function is only called during boot. Still, objtool needs full visibility to the kernel. Fix it by enabling objtool on vdso-image-{32,64}.o. Note this problem can only be seen with !CONFIG_X86_KERNEL_IBT, as that requires objtool to run individually on all translation units rather on vmlinux.o. [ bp: Massage commit message. ] Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240215032049.GA3944823@dev-arch.thelio-3990X Signed-off-by: Sasha Levin <sashal@kernel.org> * ASoC: Intel: avs: Populate board selection with new I2S entries [ Upstream commit 5b417fe0cded0b5917683398e6519aae8045cd40 ] Update board selection with tables specifying supported I2S configurations. DMIC/HDAudio board selection require no update as dmic/hdaudio machine boards are generic and not tied to any specific codec. Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://msgid.link/r/20240220115035.770402-11-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * ext4: add a hint for block bitmap corrupt state in mb_groups [ Upstream commit 68ee261fb15457ecb17e3683cb4e6a4792ca5b71 ] If one group is marked as block bitmap corrupted, its free blocks cannot be used and its free count is also deducted from the global sbi->s_freeclusters_counter. User might be confused about the absent free space because we can't query the information about corrupted block groups except unreliable error messages in syslog. So add a hint to show block bitmap corrupted groups in mb_groups. Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240119061154.1525781-1-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org> * ext4: forbid commit inconsistent quota data when errors=remount-ro [ Upstream commit d8b945fa475f13d787df00c26a6dc45a3e2e1d1d ] There's issue as follows When do IO fault injection test: Quota error (device dm-3): find_block_dqentry: Quota for id 101 referenced but not present Quota error (device dm-3): qtree_read_dquot: Can't read quota structure for id 101 Quota error (device dm-3): do_check_range: Getting block 2021161007 out of range 1-186 Quota error (device dm-3): qtree_read_dquot: Can't read quota structure for id 661 Now, ext4_write_dquot()/ext4_acquire_dquot()/ext4_release_dquot() may commit inconsistent quota data even if process failed. This may lead to filesystem corruption. To ensure filesystem consistent when errors=remount-ro there is need to call ext4_handle_error() to abort journal. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240119062908.3598806-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/amd/display: Fix nanosec stat overflow [ Upstream commit 14d68acfd04b39f34eea7bea65dda652e6db5bf6 ] [Why] Nanosec stats can overflow on long running systems potentially causing statistic logging issues. [How] Use 64bit types for nanosec stats to ensure no overflow. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * accel/habanalabs: increase HL_MAX_STR to 64 bytes to avoid warnings [ Upstream commit 8c075401f2dbda43600c61f780a165abde77877a ] Fix a warning of a buffer overflow: ‘snprintf’ output between 38 and 47 bytes into a destination of size 32 Signed-off-by: Koby Elbaz <kelbaz@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC [ Upstream commit c94612a72ac87b0337a0d85b9263266776ed4190 ] I believe RX FIFO depth define 0 is incorrect on Wangxun 10Gb NIC. It must be at least 1 since code is able to read received data from the DW_IC_DATA_CMD register. For now this define is irrelevant since the txgbe_i2c_dw_xfer_quirk() doesn't use the rx_fifo_depth member variable of struct dw_i2c_dev but is needed when converting code into generic polling mode implementation. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * HID: input: avoid polling stylus battery on Chromebook Pompom [ Upstream commit 9a5b1521e2d0d7ace70c6e5eed073babcec91409 ] Internal touchscreen on Trogdor Pompom (AKA Dynabook Chromebook C1) supports USI stylus. Unfortunately the HID descriptor for the stylus interface does not contain "Stylus" physical collection, which makes the kernel to try and pull battery information, resulting in errors. Apply HID_BATTERY_QUIRK_AVOID_QUERY to the device. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/amd/amdgpu: Fix potential ioremap() memory leaks in amdgpu_device_init() [ Upstream commit eb4f139888f636614dab3bcce97ff61cefc4b3a7 ] This ensures that the memory mapped by ioremap for adev->rmmio, is properly handled in amdgpu_device_init(). If the function exits early due to an error, the memory is unmapped. If the function completes successfully, the memory remains mapped. Reported by smatch: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:4337 amdgpu_device_init() warn: 'adev->rmmio' from ioremap() not released on lines: 4035,4045,4051,4058,4068,4337 Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * drm: Check output polling initialized before disabling [ Upstream commit 5abffb66d12bcac84bf7b66389c571b8bb6e82bd ] In drm_kms_helper_poll_disable() check if output polling support is initialized before disabling polling. If not flag this as a warning. Additionally in drm_mode_config_helper_suspend() and drm_mode_config_helper_resume() calls, that re the callers of these functions, avoid invoking them if polling is not initialized. For drivers like hyperv-drm, that do not initialize connector polling, if suspend is called without this check, it leads to suspend failure with following stack [ 770.719392] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 770.720592] printk: Suspending console(s) (use no_console_suspend to debug) [ 770.948823] ------------[ cut here ]------------ [ 770.948824] WARNING: CPU: 1 PID: 17197 at kernel/workqueue.c:3162 __flush_work.isra.0+0x212/0x230 [ 770.948831] Modules linked in: rfkill nft_counter xt_conntrack xt_owner udf nft_compat crc_itu_t nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink vfat fat mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common kvm_amd ccp mlxfw kvm psample hyperv_drm tls drm_shmem_helper drm_kms_helper irqbypass pcspkr syscopyarea sysfillrect sysimgblt hv_balloon hv_utils joydev drm fuse xfs libcrc32c pci_hyperv pci_hyperv_intf sr_mod sd_mod cdrom t10_pi sg hv_storvsc scsi_transport_fc hv_netvsc serio_raw hyperv_keyboard hid_hyperv crct10dif_pclmul crc32_pclmul crc32c_intel hv_vmbus ghash_clmulni_intel dm_mirror dm_region_hash dm_log dm_mod [ 770.948863] CPU: 1 PID: 17197 Comm: systemd-sleep Not tainted 5.14.0-362.2.1.el9_3.x86_64 #1 [ 770.948865] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 770.948866] RIP: 0010:__flush_work.isra.0+0x212/0x230 [ 770.948869] Code: 8b 4d 00 4c 8b 45 08 89 ca 48 c1 e9 04 83 e2 08 83 e1 0f 83 ca 02 89 c8 48 0f ba 6d 00 03 e9 25 ff ff ff 0f 0b e9 4e ff ff ff <0f> 0b 45 31 ed e9 44 ff ff ff e8 8f 89 b2 00 66 66 2e 0f 1f 84 00 [ 770.948870] RSP: 0018:ffffaf4ac213fb10 EFLAGS: 00010246 [ 770.948871] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8c992857 [ 770.948872] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff9aad82b00330 [ 770.948873] RBP: ffff9aad82b00330 R08: 0000000000000000 R09: ffff9aad87ee3d10 [ 770.948874] R10: 0000000000000200 R11: 0000000000000000 R12: ffff9aad82b00330 [ 770.948874] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 [ 770.948875] FS: 00007ff1b2f6bb40(0000) GS:ffff9aaf37d00000(0000) knlGS:0000000000000000 [ 770.948878] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 770.948878] CR2: 0000555f345cb666 CR3: 00000001462dc005 CR4: 0000000000370ee0 [ 770.948879] Call Trace: [ 770.948880] <TASK> [ 770.948881] ? show_trace_log_lvl+0x1c4/0x2df [ 770.948884] ? show_trace_log_lvl+0x1c4/0x2df [ 770.948886] ? __cancel_work_timer+0x103/0x190 [ 770.948887] ? __flush_work.isra.0+0x212/0x230 [ 770.948889] ? __warn+0x81/0x110 [ 770.948891] ? __flush_work.isra.0+0x212/0x230 [ 770.948892] ? report_bug+0x10a/0x140 [ 770.948895] ? handle_bug+0x3c/0x70 [ 770.948898] ? exc_invalid_op+0x14/0x70 [ 770.948899] ? asm_exc_invalid_op+0x16/0x20 [ 770.948903] ? __flush_work.isra.0+0x212/0x230 [ 770.948905] __cancel_work_timer+0x103/0x190 [ 770.948907] ? _raw_spin_unlock_irqrestore+0xa/0x30 [ 770.948910] drm_kms_helper_poll_disable+0x1e/0x40 [drm_kms_helper] [ 770.948923] drm_mode_config_helper_suspend+0x1c/0x80 [drm_kms_helper] [ 770.948933] ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus] [ 770.948942] hyperv_vmbus_suspend+0x17/0x40 [hyperv_drm] [ 770.948944] ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus] [ 770.948951] dpm_run_callback+0x4c/0x140 [ 770.948954] __device_suspend_noirq+0x74/0x220 [ 770.948956] dpm_noirq_suspend_devices+0x148/0x2a0 [ 770.948958] dpm_suspend_end+0x54/0xe0 [ 770.948960] create_image+0x14/0x290 [ 770.948963] hibernation_snapshot+0xd6/0x200 [ 770.948964] hibernate.cold+0x8b/0x1fb [ 770.948967] state_store+0xcd/0xd0 [ 770.948969] kernfs_fop_write_iter+0x124/0x1b0 [ 770.948973] new_sync_write+0xff/0x190 [ 770.948976] vfs_write+0x1ef/0x280 [ 770.948978] ksys_write+0x5f/0xe0 [ 770.948979] do_syscall_64+0x5c/0x90 [ 770.948981] ? syscall_exit_work+0x103/0x130 [ 770.948983] ? syscall_exit_to_user_mode+0x12/0x30 [ 770.948985] ? do_syscall_64+0x69/0x90 [ 770.948986] ? do_syscall_64+0x69/0x90 [ 770.948987] ? do_user_addr_fault+0x1d6/0x6a0 [ 770.948989] ? do_syscall_64+0x69/0x90 [ 770.948990] ? exc_page_fault+0x62/0x150 [ 770.948992] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 770.948995] RIP: 0033:0x7ff1b293eba7 [ 770.949010] Code: 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 770.949011] RSP: 002b:00007ffde3912128 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 770.949012] RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007ff1b293eba7 [ 770.949013] RDX: 0000000000000005 RSI: 00007ffde3912210 RDI: 0000000000000004 [ 770.949014] RBP: 00007ffde3912210 R08: 000055d7dd4c9510 R09: 00007ff1b29b14e0 [ 770.949014] R10: 00007ff1b29b13e0 R11: 0000000000000246 R12: 0000000000000005 [ 770.949015] R13: 000055d7dd4c53e0 R14: 0000000000000005 R15: 00007ff1b29f69e0 [ 770.949016] </TASK> [ 770.949017] ---[ end trace e6fa0618bfa2f31d ]--- Built-on: Rhel9, Ubuntu22 Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1706856208-9617-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Sasha Levin <sashal@kernel.org> * drm: Check polling initialized before enabling in drm_helper_probe_single_connector_modes commit 048a36d8a6085bbd8ab9e5794b713b92ac986450 upstream. In function drm_helper_probe_single_connector_modes() when we enable polling again, if it is already uninitialized, a warning is reported. This patch fixes the warning message by checking if poll is initialized before enabling it. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202401191128.db8423f1-oliver.sang@intel.com Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1706856224-9725-1-git-send-email-shradhagupta@linux.microsoft.com Cc: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * SUNRPC: increase size of rpc_wait_queue.qlen from unsigned short to unsigned int [ Upstream commit 2c35f43b5a4b9cdfaa6fdd946f5a212615dac8eb ] When the NFS client is under extreme load the rpc_wait_queue.qlen counter can be overflowed. Here is an instant of the backlog queue overflow in a real world environment shown by drgn helper: rpc_task_stats(rpc_clnt): ------------------------- rpc_clnt: 0xffff92b65d2bae00 rpc_xprt: 0xffff9275db64f000 Queue: sending[64887] pending[524] backlog[30441] binding[0] XMIT task: 0xffff925c6b1d8e98 WRITE: 750654 __dta_call_status_580: 65463 __dta_call_transmit_status_579: 1 call_reserveresult: 685189 nfs_client_init_is_complete: 1 COMMIT: 584 call_reserveresult: 573 __dta_call_status_580: 11 ACCESS: 1 __dta_call_status_580: 1 GETATTR: 10 __dta_call_status_580: 4 call_reserveresult: 6 751249 tasks for server 111.222.333.444 Total tasks: 751249 count_rpc_wait_queues(xprt): ---------------------------- **** rpc_xprt: 0xffff9275db64f000 num_reqs: 65511 wait_queue: xprt_binding[0] cnt: 0 wait_queue: xprt_binding[1] cnt: 0 wait_queue: xprt_binding[2] cnt: 0 wait_queue: xprt_binding[3] cnt: 0 rpc_wait_queue[xprt_binding].qlen: 0 maxpriority: 0 wait_queue: xprt_sending[0] cnt: 0 wait_queue: xprt_sending[1] cnt: 64887 wait_queue: xprt_sending[2] cnt: 0 wait_queue: xprt_sending[3] cnt: 0 rpc_wait_queue[xprt_sending].qlen: 64887 maxpriority: 3 wait_queue: xprt_pending[0] cnt: 524 wait_queue: xprt_pending[1] cnt: 0 wait_queue: xprt_pending[2] cnt: 0 wait_queue: xprt_pending[3] cnt: 0 rpc_wait_queue[xprt_pending].qlen: 524 maxpriority: 0 wait_queue: xprt_backlog[0] cnt: 0 wait_queue: xprt_backlog[1] cnt: 685801 wait_queue: xprt_backlog[2] cnt: 0 wait_queue: xprt_backlog[3] cnt: 0 rpc_wait_queue[xprt_backlog].qlen: 30441 maxpriority: 3 [task cnt mismatch] There is no effect on operations when this overflow occurs. However it causes confusion when trying to diagnose the performance problem. Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * PCI: Disable D3cold on Asus B1400 PCI-NVMe bridge [ Upstream commit cdea98bf1faef23166262825ce44648be6ebff42 ] The Asus B1400 with original shipped firmware versions and VMD disabled cannot resume from suspend: the NVMe device becomes unresponsive and inaccessible. This appears to be an untested D3cold transition by the vendor; Intel socwatch shows that Windows leaves the NVMe device and parent bridge in D0 during suspend, even though these firmware versions have StorageD3Enable=1. The NVMe device and parent PCI bridge both share the same "PXP" ACPI power resource, which gets turned off as both devices are put into D3cold during suspend. The _OFF() method calls DL23() which sets a L23E bit at offset 0xe2 into the PCI configuration space for this root port. This is the specific write that the _ON() routine is unable to recover from. This register is not documented in the public chipset datasheet. Disallow D3cold on the PCI bridge to enable successful suspend/resume. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742 Link: https://lore.kernel.org/r/20240228075316.7404-1-drake@endlessos.org Signed-off-by: Daniel Drake <drake@endlessos.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jian-Hong Pan <jhp@endlessos.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * Revert "ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default" [ Upstream commit cb98555fcd8eee98c30165537c7e394f3a66e809 ] This reverts commit d52848620de00cde4a3a5df908e231b8c8868250, which was originally put in place to work around a s2idle failure on this platform where the NVMe device was inaccessible upon resume. After extended testing, we found that the firmware's implementation of S3 is buggy and intermittently fails to wake up the system. We need to revert to s2idle mode. The NVMe issue has now been solved more precisely in the commit titled "PCI: Disable D3cold on Asus B1400 PCI-NVMe bridge" Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742 Link: https://lore.kernel.org/r/20240228075316.7404-2-drake@endlessos.org Signed-off-by: Daniel Drake <drake@endlessos.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jian-Hong Pan <jhp@endlessos.org> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * libperf evlist: Avoid out-of-bounds access [ Upstream commit 1947b92464c3268381604bbe2ac977a3fd78192f ] Parallel testing appears to show a race between allocating and setting evsel ids. As there is a bounds check on the xyarray it yields a segv like: ``` AddressSanitizer:DEADLYSIGNAL ================================================================= ==484408==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000010 ==484408==The signal is caused by a WRITE memory access. ==484408==Hint: address points to the zero page. #0 0x55cef5d4eff4 in perf_evlist__id_hash tools/lib/perf/evlist.c:256 #1 0x55cef5d4f132 in perf_evlist__id_add tools/lib/perf/evlist.c:274 #2 0x55cef5d4f545 in perf_evlist__id_add_fd tools/lib/perf/evlist.c:315 #3 0x55cef5a1923f in store_evsel_ids util/evsel.c:3130 #4 0x55cef5a19400 in evsel__store_ids util/evsel.c:3147 #5 0x55cef5888204 in __run_perf_stat tools/perf/builtin-stat.c:832 #6 0x55cef5888c06 in run_perf_stat tools/perf/builtin-stat.c:960 #7 0x55cef58932db in cmd_stat tools/perf/builtin-stat.c:2878 ... ``` Avoid this crash by early exiting the perf_evlist__id_add_fd and perf_evlist__id_add is the access is out-of-bounds. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240229070757.796244-1-irogers@google.com Signed-off-by: Sasha Levin <sashal@kernel.org> * crypto: iaa - Fix async_disable descriptor leak [ Upstream commit 262534ddc88dfea7474ed18adfecf856e4fbe054 ] The disable_async paths of iaa_compress/decompress() don't free idxd descriptors in the async_disable case. Currently this only happens in the testcases where req->dst is set to null. Add a test to free them in those paths. Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org> * input/touchscreen: imagis: Correct the maximum touch area value [ Upstream commit 54a62ed17a705ef1ac80ebca2b62136b19243e19 ] As specified in downstream IST3038B driver and proved by testing, the correct maximum reported value of touch area is 16. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> Signed-off-by: Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240301164659.13240-2-karelb@gimli.ms.mff.cuni.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * drivers/perf: hisi: Enable HiSilicon Erratum 162700402 quirk for HIP09 [ Upstream commit e10b6976f6b9afdf3564f88c851e42d139bb19c0 ] HiSilicon UC PMU v2 suffers the erratum 162700402 that the PMU counter cannot be set due to the lack of clock under power saving mode. This will lead to error or inaccurate counts. The clock can be enabled by the PMU global enabling control. This patch tries to fix this by set the UC PMU enable before set event period to turn on the clock, and then restore the UC PMU configuration. The counter register can hold its value without a clock. Signed-off-by: Junhao He <hejunhao3@huawei.com> Reviewed-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240227125231.53127-1-hejunhao3@huawei.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * block: prevent division by zero in blk_rq_stat_sum() [ Upstream commit 93f52fbeaf4b676b21acfe42a5152620e6770d02 ] The expression dst->nr_samples + src->nr_samples may have zero value on overflow. It is necessary to add a check to avoid division by zero. Found by Linux Verification Center (linuxtesting.org) with Svace. Signed-off-by: Roman Smirnov <r.smirnov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20240305134509.23108-1-r.smirnov@omp.ru Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> * RDMA/cm: add timeout to cm_destroy_id wait [ Upstream commit 96d9cbe2f2ff7abde021bac75eafaceabe9a51fa ] Add timeout to cm_destroy_id, so that userspace can trigger any data collection that would help in analyzing the cause of delay in destroying the cm_id. New noinline function helps dtrace/ebpf programs to hook on to it. Existing functionality isn't changed except triggering a probe-able new function at every timeout interval. We have seen cases where CM messages stuck with MAD layer (either due to software bug or faulty HCA), leading to cm_id getting stuck in the following call stack. This patch helps in resolving such issues faster. kernel: ... INFO: task XXXX:56778 blocked for more than 120 seconds. ... Call Trace: __schedule+0x2bc/0x895 schedule+0x36/0x7c schedule_timeout+0x1f6/0x31f ? __slab_free+0x19c/0x2ba wait_for_completion+0x12b/0x18a ? wake_up_q+0x80/0x73 cm_destroy_id+0x345/0x610 [ib_cm] ib_destroy_cm_id+0x10/0x20 [ib_cm] rdma_destroy_id+0xa8/0x300 [rdma_cm] ucma_destroy_id+0x13e/0x190 [rdma_ucm] ucma_write+0xe0/0x160 [rdma_ucm] __vfs_write+0x3a/0x16d vfs_write+0xb2/0x1a1 ? syscall_trace_enter+0x1ce/0x2b8 SyS_write+0x5c/0xd3 do_syscall_64+0x79/0x1b9 entry_SYSCALL_64_after_hwframe+0x16d/0x0 Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com> Link: https://lore.kernel.org/r/20240309063323.458102-1-manjunath.b.patil@oracle.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * Input: imagis - use FIELD_GET where applicable [ Upstream commit c0ca3dbd03d66c6b9e044f48720e6ab5cef37ae5 ] Instead of manually extracting certain bits from registers with binary ANDs and shifts, the FIELD_GET macro can be used. With this in mind, the *_SHIFT macros can be dropped. Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr> Link: https://lore.kernel.org/r/20240306-b4-imagis-keys-v3-1-2c429afa8420@skole.hr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * Input: allocate keycode for Display refresh rate toggle [ Upstream commit cfeb98b95fff25c442f78a6f616c627bc48a26b7 ] Newer Lenovo Yogas and Legions with 60Hz/90Hz displays send a wmi event when Fn + R is pressed. This is intended for use to switch between the two refresh rates. Allocate a new KEY_REFRESH_RATE_TOGGLE keycode for it. Signed-off-by: Gergo Koteles <soyer@irl.hu> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/15a5d08c84cf4d7b820de34ebbcf8ae2502fb3ca.1710065750.git.soyer@irl.hu Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * platform/x86: acer-wmi: Add support for Acer PH16-71 [ Upstream commit 20a36ec343d4c5abc2378a45ab5e7ea1ca85020a ] Add Acer Predator PH16-71 to Acer_quirks with predator_v4 to support mode button and fan speed sensor. Signed-off-by: SungHwan Jung <onenowy@gmail.com> Link: https://lore.kernel.org/r/20240220055231.6451-1-onenowy@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * platform/x86: acer-wmi: Add predator_v4 module parameter [ Upstream commit f9124f2a454a6f1edb4eae9f0646b1a61fd74dba ] This parameter allows predator laptop users to test and use features (mode button, platform profile, fan speed monitoring) without adding model names to acer_quirks and compiling kernel. Signed-off-by: SungHwan Jung <onenowy@gmail.com> Link: https://lore.kernel.org/r/20240220080416.6395-1-onenowy@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * platform/x86: touchscreen_dmi: Add an extra entry for a variant of the Chuwi Vi8 tablet [ Upstream commit 1266e2efb7512dbf20eac820ca2ed34de6b1c3e7 ] Signed-off-by: Alban Boyé <alban.boye@protonmail.com> Link: https://lore.kernel.org/r/20240227223919.11587-1-alban.boye@protonmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * perf/x86/amd/lbr: Discard erroneous branch entries [ Upstream commit 29297ffffb0bf388778bd4b581a43cee6929ae65 ] The Revision Guide for AMD Family 19h Model 10-1Fh processors declares Erratum 1452 which states that non-branch entries may erroneously be recorded in the Last Branch Record (LBR) stack with the valid and spec bits set. Such entries can be recognized by inspecting bit 61 of the corresponding LastBranchStackToIp register. This bit is currently reserved but if found to be set, the associated branch entry should be discarded. Signed-off-by: Sandipan Das <sandipan.das@amd.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://bugzilla.kernel.org/attachment.cgi?id=305518 Link: https://lore.kernel.org/r/3ad2aa305f7396d41a40e3f054f740d464b16b7f.1706526029.git.sandipan.das@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org> * ALSA: hda/realtek: Add quirk for Lenovo Yoga 9 14IMH9 [ Upstream commit 9b714a59b719b1ba9382c092f0f7aa4bbe94eba1 ] The speakers on the Lenovo Yoga 9 14IMH9 are similar to previous generations such as the 14IAP7, and the bass speakers can be fixed using similar methods with one caveat: 14IMH9 uses CS35L41 amplifiers which need to be activated separately. Signed-off-by: Jichi Zhang <i@jichi.ca> Message-ID: <20240315081954.45470-3-i@jichi.ca> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> * ktest: force $buildonly = 1 for 'make_warnings_file' test type [ Upstream commit 07283c1873a4d0eaa0e822536881bfdaea853910 ] The test type "make_warnings_file" should have no mandatory configuration parameters other than the ones required by the "build" test type, because its purpose is to create a file with build warnings that may or may not be used by other subsequent tests. Currently, the only way to use it as a stand-alone test is by setting POWER_CYCLE, CONSOLE, SSH_USER, BUILD_TARGET, TARGET_IMAGE, REBOOT_TYPE and GRUB_MENU. Link: https://lkml.kernel.org/r/20240315-ktest-v2-1-c5c20a75f6a3@marliere.net Cc: John Hawley <warthog9@eaglescrag.net> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * Input: xpad - add support for Snakebyte GAMEPADs [ Upstream commit 81c32343d04f8ca974681d5fb5d939d2e1f58851 ] Add Snakebyte GAMEPAD BASE X and Snakebyte GAMEPAD RGB X to the list of supported devices. Signed-off-by: Matt Scialabba <matt.git@fastmail.fm> Link: https://lore.kernel.org/r/efbfb428-06b0-48f9-8701-db291c2a9d65@app.fastmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * ring-buffer: use READ_ONCE() to read cpu_buffer->commit_page in concurrent environment [ Upstream commit f1e30cb6369251c03f63c564006f96a54197dcc4 ] In function ring_buffer_iter_empty(), cpu_buffer->commit_page is read while other threads may change it. It may cause the time_stamp that read in the next line come from a different page. Use READ_ONCE() to avoid having to reason about compiler optimizations now and in future. Link: https://lore.kernel.org/linux-trace-kernel/tencent_DFF7D3561A0686B5E8FC079150A02505180A@qq.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: linke li <lilinke99@qq.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * tools: iio: replace seekdir() in iio_generic_buffer [ Upstream commit 4e6500bfa053dc133021f9c144261b77b0ba7dc8 ] Replace seekdir() with rewinddir() in order to fix a localized glibc bug. One of the glibc patches that stable Gentoo is using causes an improper directory stream positioning bug on 32bit arm. That in turn ends up as a floating point exception in iio_generic_buffer. The attached patch provides a fix by using an equivalent function which should not cause trouble for other distros and is easier to reason about in general as it obviously always goes back to to the start. https://sourceware.org/bugzilla/show_bug.cgi?id=31212 Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro> Link: https://lore.kernel.org/r/20240108103224.3986-1-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * bus: mhi: host: Add MHI_PM_SYS_ERR_FAIL state [ Upstream commit bce3f770684cc1d91ff9edab431b71ac991faf29 ] When processing a SYSERR, if the device does not respond to the MHI_RESET from the host, the host will be stuck in a difficult to recover state. The host will remain in MHI_PM_SYS_ERR_PROCESS and not clean up the host channels. Clients will not be notified of the SYSERR via the destruction of their channel devices, which means clients may think that the device is still up. Subsequent SYSERR events such as a device fatal error will not be processed as the state machine cannot transition from PROCESS back to DETECT. The only way to recover from this is to unload the mhi module (wipe the state machine state) or for the mhi controller to initiate SHUTDOWN. This issue was discovered by stress testing soc_reset events on AIC100 via the sysfs node. soc_reset is processed entirely in hardware. When the register write hits the endpoint hardware, it causes the soc to reset without firmware involvement. In stress testing, there is a rare race where soc_reset N will cause the soc to reset and PBL to signal SYSERR (fatal error). If soc_reset N+1 is triggered before PBL can process the MHI_RESET from the host, then the soc will reset again, and re-run PBL from the beginning. This will cause PBL to lose all state. PBL will be waiting for the host to respond to the new syserr, but host will be stuck expecting the previous MHI_RESET to be processed. Additionally, the AMSS EE firmware (QSM) was hacked to synthetically reproduce the issue by simulating a FW hang after the QSM issued a SYSERR. In this case, soc_reset would not recover the device. For this failure case, to recover the device, we need a state similar to PROCESS, but can transition to DETECT. There is not a viable existing state to use. POR has the needed transitions, but assumes the device is in a good state and could allow the host to attempt to use the device. Allowing PROCESS to transition to DETECT invites the possibility of parallel SYSERR processing which could get the host and device out of sync. Thus, invent a new state - MHI_PM_SYS_ERR_FAIL This essentially a holding state. It allows us to clean up the host elements that are based on the old state of the device (channels), but does not allow us to directly advance back to an operational state. It does allow the detection and processing of another SYSERR which may recover the device, or allows the controller to do a clean shutdown. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20240112180800.536733-1-quic_jhugo@quicinc.com Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * kernfs: RCU protect kernfs_nodes and avoid kernfs_idr_lock in kernfs_find_and_get_node_by_id() [ Upstream commit 4207b556e62f0a8915afc5da4c5d5ad915a253a5 ] The BPF helper bpf_cgroup_from_id() calls kernfs_find_and_get_node_by_id() which acquires kernfs_idr_lock, which is an non-raw non-IRQ-safe lock. This can lead to deadlocks as bpf_cgroup_from_id() can be called from any BPF programs including e.g. the ones that attach to functions which are holding the scheduler rq lock. Consider the following BPF program: SEC("fentry/__set_cpus_allowed_ptr_locked") int BPF_PROG(__set_cpus_allowed_ptr_locked, struct task_struct *p, struct affinity_context *affn_ctx, struct rq *rq, struct rq_flags *rf) { struct cgroup *cgrp = bpf_cgroup_from_id(p->cgroups->dfl_cgrp->kn->id); if (cgrp) { bpf_printk("%d[%s] in %s", p->pid, p->comm, cgrp->kn->name); bpf_cgroup_release(cgrp); } return 0; } __set_cpus_allowed_ptr_locked() is called with rq lock held and the above BPF program calls bpf_cgroup_from_id() within leading to the following lockdep warning: ===================================================== WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected 6.7.0-rc3-work-00053-g07124366a1d7-dirty #147 Not tainted ----------------------------------------------------- repro/1620 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: ffffffff833b3688 (kernfs_idr_lock){+.+.}-{2:2}, at: kernfs_find_and_get_node_by_id+0x1e/0x70 and this task is already holding: ffff888237ced698 (&rq->__lock){-.-.}-{2:2}, at: task_rq_lock+0x4e/0xf0 which would create a new lock dependency: (&rq->__lock){-.-.}-{2:2} -> (kernfs_idr_lock){+.+.}-{2:2} ... Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(kernfs_idr_lock); local_irq_disable(); lock(&rq->__lock); lock(kernfs_idr_lock); <Interrupt> lock(&rq->__lock); *** DEADLOCK *** ... Call Trace: dump_stack_lvl+0x55/0x70 dump_stack+0x10/0x20 __lock_acquire+0x781/0x2a40 lock_acquire+0xbf/0x1f0 _raw_spin_lock+0x2f/0x40 kernfs_find_and_get_node_by_id+0x1e/0x70 cgroup_get_from_id+0x21/0x240 bpf_cgroup_from_id+0xe/0x20 bpf_prog_98652316e9337a5a___set_cpus_allowed_ptr_locked+0x96/0x11a bpf_trampoline_6442545632+0x4f/0x1000 __set_cpus_allowed_ptr_locked+0x5/0x5a0 sched_setaffinity+0x1b3/0x290 __x64_sys_sched_setaffinity+0x4f/0x60 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e Let's fix it by protecting kernfs_node and kernfs_root with RCU and making kernfs_find_and_get_node_by_id() acquire rcu_read_lock() instead of kernfs_idr_lock. This adds an rcu_head to kernfs_node making it larger by 16 bytes on 64bit. Combined with the preceding rearrange patch, the net increase is 8 bytes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andrea Righi <andrea.righi@canonical.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20240109214828.252092-4-tj@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * usb: typec: ucsi: Add qcm6490-pmic-glink as needing PDOS quirk [ Upstream commit 88bae831f3810e02c9c951233c7ee662aa13dc2c ] The QCM6490 Linux Android firmware needs this workaround as well. Add it to the list. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20240208-fp5-pmic-glink-v2-2-4837d4abd5a4@fairphone.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * thunderbolt: Calculate DisplayPort tunnel bandwidth after DPRX capabilities read [ Upstream commit ccd845021147dc8257a05ed8f5a7f9c61a9101e3 ] According to USB4 Connection Manager guide, after DisplayPort tunnel was setup, the DPRX capabilities read is performed by the DPTX. According to VESA spec, this shall be completed within 5 seconds after the DisplayPort tunnel was setup. Hence, if the bit: DPRX Capabilities Read Done, was not set to '1' by this time, we timeout and fail calculating DisplayPort tunnel consumed bandwidth. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * usb: gadget: uvc: refactor the check for a valid buffer in the pump worker [ Upstream commit 5e7ea65daf13a95a6cc63d1377e4c500e4e1340f ] By toggling the condition check for a valid buffer, the else path can be completely avoided. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20240214-uvc-gadget-cleanup-v1-2-de6d78780459@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * usb: gadget: uvc: mark incomplete frames with UVC_STREAM_ERR [ Upstream commit 2a3b7af120477d0571b815ccb8600cafd5ebf02f ] If an frame was transmitted incomplete to the host, we set the UVC_STREAM_ERR bit in the header for the last request that is going to be queued. This way the host will know that it should drop the frame instead of trying to display the corrupted content. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20240214-uvc-error-tag-v1-2-37659a3877fe@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * usb: typec: ucsi: Limit read size on v1.2 [ Upstream commit b3db266fb031fba88c423d4bb8983a73a3db6527 ] Between UCSI 1.2 and UCSI 2.0, the size of the MESSAGE_IN region was increased from 16 to 256. In order to avoid overflowing reads for older systems, add a mechanism to use the read UCSI version to truncate read sizes on UCSI v1.2. Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Link: https://lore.kernel.org/r/20240209143723.v5.1.Iacf5570a66b82b73ef03daa6557e2fc0db10266a@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * serial: 8250_of: Drop quirk fot NPCM from 8250_port [ Upstream commit cd0eb354d441488feed6685adbeb1acd45db1b8d ] We are not supposed to spread quirks in 8250_port module especially when we have a separate driver for the hardware in question. Move quirk from generic module to the driver that uses it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240215145029.581389-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * thunderbolt: Keep the domain powered when USB4 port is in redrive mode [ Upstream commit a75e0684efe567ae5f6a8e91a8360c4c1773cf3a ] If a DiplayPort cable is directly connected to the host routers USB4 port, there is no tunnel involved but the port is in "redrive" mode meaning that it is re-driving the DisplayPort signals from its DisplayPort source. In this case we need to keep the domain powered on otherwise once the domain enters D3cold the connected monitor blanks too. Since this happens only on Intel Barlow Ridge add a quirk that takes runtime PM reference if we detect that the USB4 port entered redrive mode (and release it once it exits the mode). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * usb: typec: tcpci: add generic tcpci fallback compatible [ Upstream commit 8774ea7a553e2aec323170d49365b59af0a2b7e0 ] The driver already support the tcpci binding for the i2c_device_id so add the support for the of_device_id too. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240222210903.208901-3-m.felsch@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined [ Upstream commit 12f371e2b6cb4b79c788f1f073992e115f4ca918 ] Function checkdone is only required if QUIRK2 is defined, so add appropriate #if / #endif around the function. Cleans up clang scan build warning: drivers/usb/host/sl811-hcd.c:588:18: warning: unused function 'checkdone' [-Wunused-function] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240307111351.1982382-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * ASoC: amd: yc: Fix non-functional mic on ASUS M7600RE [ Upstream commit db185362fca554b201e2c62beb15a02bb39a064b ] The ASUS M7600RE (Vivobook Pro 16X OLED) needs a quirks-table entry for the internal microphone to function properly. Signed-off-by: Mitch Cooley <m.cooley.198@gmail.com> Link: https://msgid.link/r/CALijGznExWW4fujNWwMzmn_K=wo96sGzV_2VkT7NjvEUdkg7Gw@mail.gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * thermal/of: Assume polling-delay(-passive) 0 when absent [ Upstream commit 488164006a281986d95abbc4b26e340c19c4c85b ] Currently, thermal zones associated with providers that have interrupts for signaling hot/critical trips are required to set a polling-delay of 0 to indicate no polling. This feels a bit backwards. Change the code such that "no polling delay" also means "no polling". Suggested-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20240125-topic-thermal-v1-2-3c9d4dced138@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org> * ASoC: soc-core.c: Skip dummy codec when adding platforms [ Upstream commit 23fb6bc2696119391ec3a92ccaffe50e567c515e ] When pcm_runtime is adding platform components it will scan all registered components. In case of DPCM FE/BE some DAI links will configure dummy platform. However both dummy codec and dummy platform are using "snd-soc-dummy" as component->name. Dummy codec should be skipped when adding platforms otherwise there'll be overflow and UBSAN complains. Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com> Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Link: https://msgid.link/r/20240305065606.3778642-1-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * x86/xen: attempt to inflate the memory balloon on PVH [ Upstream commit 38620fc4e8934f1801c7811ef39a041914ac4c1d ] When running as PVH or HVM Linux will use holes in the memory map as scratch space to map grants, foreign domain pages and possibly miscellaneous other stuff. However the usage of such memory map holes for Xen purposes can be problematic. The request of holesby Xen happen quite early in the kernel boot process (grant table setup already uses scratch map space), and it's possible that by then not all devices have reclaimed their MMIO space. It's not unlikely for chunks of Xen scratch map space to end up using PCI bridge MMIO window memory, which (as expected) causes quite a lot of issues in the system. At least for PVH dom0 we have the possibility of using regions marked as UNUSABLE in the e820 memory map. Either if the region is UNUSABLE in the native memory map, or it has been converted into UNUSABLE in order to hide RAM regions from dom0, the second stage translation page-tables can populate those areas without issues. PV already has this kind of logic, where the balloon driver is inflated at boot. Re-use the current logic in order to also inflate it when running as PVH. onvert UNUSABLE regions up to the ratio specified in EXTRA_MEM_RATIO to RAM, while reserving them using xen_add_extra_mem() (which is also moved so it's no longer tied to CONFIG_PV). [jgross: fixed build for CONFIG_PVH without CONFIG_XEN_PVH] Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20240220174341.56131-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * fbdev: viafb: fix typo in hw_bitblt_1 and hw_bitblt_2 [ Upstream commit bc87bb342f106a0402186bcb588fcbe945dced4b ] There are some actions with value 'tmp' but 'dst_addr' is checked instead. It is obvious that a copy-paste error was made here and the value of variable 'tmp' should be checked here. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org> * io_uring: clear opcode specific data for an early failure [ Upstream commit e21e1c45e1fe2e31732f40256b49c04e76a17cee ] If failure happens before the opcode prep handler is called, ensure that we clear the opcode specific area of the request, which holds data specific to that request type. This prevents errors where opcode handlers either don't get to clear per-request private data since prep isn't even called. Reported-and-tested-by: syzbot+f8e9a371388aa62ecab4@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> * modpost: fix null pointer dereference [ Upstream commit 23dfd914d2bfc4c9938b0084dffd7105de231d98 ] If the find_fromsym() call fails and returns NULL, the warn() call will dereference this NULL pointer and cause the program to crash. This happened when I tried to build with "test_user_copy" module. With this fix, it prints lots of warnings like this: WARNING: modpost: lib/test_user_copy: section mismatch in reference: (unknown)+0x4 (section: .text.fixup) -> (unknown) (section: .init.text) masahiroy@kernel.org: The issue is reproduced with ARCH=arm allnoconfig + CONFIG_MODULES=y + CONFIG_RUNTIME_TESTING_MENU=y + CONFIG_TEST_USER_COPY=m Signed-off-by: Max Kellermann <max.kellermann@ionos.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * drivers/nvme: Add quirks for device 126f:2262 [ Upstream commit e89086c43f0500bc7c4ce225495b73b8ce234c1f ] This commit adds NVME_QUIRK_NO_DEEPEST_PS and NVME_QUIRK_BOGUS_NID for device [126f:2262], which appears to be a generic VID:PID pair used for many SSDs based on the Silicon Motion SM2262/SM2262EN controller. Two of my SSDs with this VID:PID pair exhibit the same behavior: * They frequently have trouble exiting the deepest power state (5), resulting in the entire disk unresponsive. Verified by setting nvme_core.default_ps_max_latency_us=10000 and observing them behaving normally. * They produce all-zero nguid and eui64 with `nvme id-ns` command. The offending products are: * HP SSD EX950 1TB * HIKVISION C2000Pro 2TB Signed-off-by: Jiawei Fu <i@ibugone.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> * fbmon: prevent division by zero in fb_videomode_from_videomode() [ Upstream commit c2d953276b8b27459baed1277a4fdd5dd9bd4126 ] The expression htotal * vtotal can have a zero value on overflow. It is necessary to prevent division by zero like in fb_var_to_videomode(). Found by Linux Verification Center (linuxtesting.org) with Svace. Signed-off-by: Roman Smirnov <r.smirnov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org> * ALSA: hda/realtek: Add quirks for some Clevo laptops [ Upstream commit 33affa7fb46c0c07f6c49d4ddac9dd436715064c ] Add audio quirks to fix speaker output and headset detection on some new Clevo models: - L240TU (ALC245) - PE60SNE-G (ALC1220) - V350SNEQ (ALC245) Co-authored-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Message-ID: <20240319212726.62888-1-tcrawford@system76.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> * drm/amdgpu: Init zone device and drm client after mode-1 reset on reload [ Upstream commit f679fd6057fbf5ab34aaee28d58b7f81af0cbf48 ] In passthrough environment, when amdgpu is reloaded after unload, mode-1 is triggered after initializing the necessary IPs, That init does not include KFD, and KFD init waits until the reset is completed. KFD init is called in the reset handler, but in this case, the zone device and drm client is not initialized, causing app to create kernel panic. v2: Removing the init KFD condition from amdgpu_amdkfd_drm_client_create. As the previous version has the potential of creating DRM client twice. v3: v2 patch results in SDMA engine hung as DRM open causes VM clear to SDMA before SDMA init. Adding the condition to in drm client creation, on top of v1, to guard against drm client creation call multiple times. Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org> * gcc-plugins/stackleak: Avoid .head.text section commit e7d24c0aa8e678f41457d1304e2091cac6fd1a2e upstream. The .head.text section carries the startup code that runs with the MMU off or with a translation of memory that deviates from the ordinary one. So avoid instrumentation with the stackleak plugin, which already avoids .init.text and .noinstr.text entirely. Fixes: 48204aba801f1b51 ("x86/sme: Move early SME kernel encryption handling into .head.text") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202403221630.2692c998-oliver.sang@intel.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20240328064256.2358634-2-ardb+git@google.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> * media: mediatek: vcodec: Fix oops when HEVC init fails [ Upstream commit 97c75ee5de060d271d80109b0c47cb6008439e5b ] The stateless HEVC decoder saves the instance pointer in the context regardless if the initialization worked or not. This caused a use after free, when the pointer is freed in case of a failure in the deinit function. Only store the instance pointer when the initialization was successful, to solve this issue. Hardware name: Acer Tomato (rev3 - 4) board (DT) pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] lr : vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] sp : ffff80008750bc20 x29: ffff80008750bc20 x28: ffff1299f6d70000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff80008750bc98 x22: 000000000000a003 x21: ffffd45c4cfae000 x20: 0000000000000010 x19: ffff1299fd668310 x18: 000000000000001a x17: 000000040044ffff x16: ffffd45cb15dc648 x15: 0000000000000000 x14: ffff1299c08da1c0 x13: ffffd45cb1f87a10 x12: ffffd45cb2f5fe80 x11: 0000000000000001 x10: 0000000000001b30 x9 : ffffd45c4d12b488 x8 : 1fffe25339380d81 x7 : 0000000000000001 x6 : ffff1299c9c06c00 x5 : 0000000000000132 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000010 x1 : ffff80008750bc98 x0 : 0000000000000000 Call trace: vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] vpu_dec_deinit+0x1c/0x30 [mtk_vcodec_dec] vdec_hevc_slice_deinit+0x30/0x98 [mtk_vcodec_dec] vdec_if_deinit+0x38/0x68 [mtk_vcodec_dec] mtk_vcodec_dec_release+0x20/0x40 [mtk_vcodec_dec] fops_vcodec_release+0x64/0x118 [mtk_vcodec_dec] v4l2_release+0x7c/0x100 __fput+0x80/0x2d8 __fput_sync+0x58/0x70 __arm64_sys_close+0x40/0x90 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0xd8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x1a8/0x1b0 Code: d503201f f9401660 b900127f b900227f (f9400400) Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Fixes: 2674486aac7d ("media: mediatek: vcodec: support stateless hevc decoder") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org> * media: mediatek: vcodec: adding lock to protect decoder context list [ Upstream commit 6467cda18c9f9b5f2f9a0aa1e2861c653e41f382 ] Add a lock for the ctx_list, to avoid accessing a NULL pointer within the 'vpu_dec_ipi_handler' function when the ctx_list has been deleted due to an unexpected behavior on the SCP IP block. Hardware name: Google juniper sku16 board (DT) pstate: 20400005 (nzCv daif +PAN -UAO -TCO BTYPE=--) pc : vpu_dec_ipi_handler+0x58/0x1f8 [mtk_vcodec_dec] lr : scp_ipi_handler+0xd0/0x194 [mtk_scp] sp : ffffffc0131dbbd0 x29: ffffffc0131dbbd0 x28: 0000000000000000 x27: ffffff9bb277f348 x26: ffffff9bb242ad00 x25: ffffffd2d440d3b8 x24: ffffffd2a13ff1d4 x23: ffffff9bb7fe85a0 x22: ffffffc0133fbdb0 x21: 0000000000000010 x20: ffffff9b050ea328 x19: ffffffc0131dbc08 x18: 0000000000001000 x17: 0000000000000000 x16: ffffffd2d461c6e0 x15: 0000000000000242 x14: 000000000000018f x13: 000000000000004d x12: 0000000000000000 x11: 0000000000000001 x10: fffffffffffffff0 x9 : ffffff9bb6e793a8 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : fffffffffffffff0 x3 : 0000000000000020 x2 : ffffff9bb6e79080 x1 : 0000000000000010 x0 : ffffffc0131dbc08 Call trace: vpu_dec_ipi_handler+0x58/0x1f8 [mtk_vcodec_dec (HASH:6c3f 2)] scp_ipi_handler+0xd0/0x194 [mtk_scp (HASH:7046 3)] mt8183_scp_irq_handler+0x44/0x88 [mtk_scp (HASH:7046 3)] scp_irq_handler+0x48/0x90 [mtk_scp (HASH:7046 3)] irq_thread_fn+0x38/0x94 irq_thread+0x100/0x1c0 kthread+0x140/0x1fc ret_from_fork+0x10/0x30 Code: 54000088 f94ca50a eb14015f 54000060 (f9400108) ---[ end trace ace43ce36cbd5c93 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: 0x12c4000000 from 0xffffffc010000000 PHYS_OFFSET: 0xffffffe580000000 CPU features: 0x08240002,2188200c Memory Limit: none Fixes: 655b86e52eac ("media: mediatek: vcodec: Fix possible invalid memory access for decoder") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@…

[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e deepin-community#3 [fffffe00003fced0] do_nmi at ffffffff8922660d deepin-community#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 deepin-community#5 [ffffa655314979e8] io_serial_in at ffffffff89792594 deepin-community#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 deepin-community#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 deepin-community#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 deepin-community#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 deepin-community#10 [ffffa65531497ac8] console_unlock at ffffffff89316124 deepin-community#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 deepin-community#12 [ffffa65531497b68] printk at ffffffff89318306 deepin-community#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 deepin-community#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] deepin-community#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] deepin-community#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] deepin-community#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] deepin-community#18 [ffffa65531497f10] kthread at ffffffff892d2e72 deepin-community#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 86a41ea9fd79ddb6145cb8ebf5aeafceabca6f7d ] When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/87sfialu2n.fsf@cloudflare.com/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ deepin-community#34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 deepin-community#3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 deepin-community#4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 deepin-community#5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 deepin-community#6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 deepin-community#7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 deepin-community#8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 deepin-community#9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ deepin-community#34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c597 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+6acef9e0a4d1f46c83d4@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: gnault@redhat.com CC: cong.wang@bytedance.com Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Link: https://patch.msgid.link/20240806160626.1248317-1-jchapman@katalix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 86a41ea9fd79ddb6145cb8ebf5aeafceabca6f7d ] When l2tp tunnels use a socket provided by userspace, we can hit lockdep splats like the below when data is transmitted through another (unrelated) userspace socket which then gets routed over l2tp. This issue was previously discussed here: https://lore.kernel.org/netdev/87sfialu2n.fsf@cloudflare.com/ The solution is to have lockdep treat socket locks of l2tp tunnel sockets separately than those of standard INET sockets. To do so, use a different lockdep subclass where lock nesting is possible. ============================================ WARNING: possible recursive locking detected 6.10.0+ #34 Not tainted -------------------------------------------- iperf3/771 is trying to acquire lock: ffff8881027601d8 (slock-AF_INET/1){+.-.}-{2:2}, at: l2tp_xmit_skb+0x243/0x9d0 but task is already holding lock: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_INET/1); lock(slock-AF_INET/1); *** DEADLOCK *** May be due to missing lock nesting notation 10 locks held by iperf3/771: #0: ffff888102650258 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x1a/0x40 #1: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #2: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #3: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x28b/0x9f0 #4: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0xf9/0x260 #5: ffff888102650d98 (slock-AF_INET/1){+.-.}-{2:2}, at: tcp_v4_rcv+0x1848/0x1e10 #6: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x4b/0xbc0 #7: ffffffff822ac220 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x17a/0x1130 #8: ffffffff822ac1e0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0xcc/0x1450 #9: ffff888101f33258 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock#2){+...}-{2:2}, at: __dev_queue_xmit+0x513/0x1450 stack backtrace: CPU: 2 UID: 0 PID: 771 Comm: iperf3 Not tainted 6.10.0+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x69/0xa0 dump_stack+0xc/0x20 __lock_acquire+0x135d/0x2600 ? srso_alias_return_thunk+0x5/0xfbef5 lock_acquire+0xc4/0x2a0 ? l2tp_xmit_skb+0x243/0x9d0 ? __skb_checksum+0xa3/0x540 _raw_spin_lock_nested+0x35/0x50 ? l2tp_xmit_skb+0x243/0x9d0 l2tp_xmit_skb+0x243/0x9d0 l2tp_eth_dev_xmit+0x3c/0xc0 dev_hard_start_xmit+0x11e/0x420 sch_direct_xmit+0xc3/0x640 __dev_queue_xmit+0x61c/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 __tcp_send_ack+0x1b8/0x340 tcp_send_ack+0x23/0x30 __tcp_ack_snd_check+0xa8/0x530 ? srso_alias_return_thunk+0x5/0xfbef5 tcp_rcv_established+0x412/0xd70 tcp_v4_do_rcv+0x299/0x420 tcp_v4_rcv+0x1991/0x1e10 ip_protocol_deliver_rcu+0x50/0x220 ip_local_deliver_finish+0x158/0x260 ip_local_deliver+0xc8/0xe0 ip_rcv+0xe5/0x1d0 ? __pfx_ip_rcv+0x10/0x10 __netif_receive_skb_one_core+0xce/0xe0 ? process_backlog+0x28b/0x9f0 __netif_receive_skb+0x34/0xd0 ? process_backlog+0x28b/0x9f0 process_backlog+0x2cb/0x9f0 __napi_poll.constprop.0+0x61/0x280 net_rx_action+0x332/0x670 ? srso_alias_return_thunk+0x5/0xfbef5 ? find_held_lock+0x2b/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0xda/0x480 ? __dev_queue_xmit+0xa2c/0x1450 do_softirq+0xa1/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0xc8/0xe0 ? __dev_queue_xmit+0xa2c/0x1450 __dev_queue_xmit+0xa48/0x1450 ? ip_finish_output2+0xf4c/0x1130 ip_finish_output2+0x6b6/0x1130 ? srso_alias_return_thunk+0x5/0xfbef5 ? __ip_finish_output+0x217/0x380 ? srso_alias_return_thunk+0x5/0xfbef5 __ip_finish_output+0x217/0x380 ip_output+0x99/0x120 __ip_queue_xmit+0xae4/0xbc0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? tcp_options_write.constprop.0+0xcb/0x3e0 ip_queue_xmit+0x34/0x40 __tcp_transmit_skb+0x1625/0x1890 tcp_write_xmit+0x766/0x2fb0 ? __entry_text_end+0x102ba9/0x102bad ? srso_alias_return_thunk+0x5/0xfbef5 ? __might_fault+0x74/0xc0 ? srso_alias_return_thunk+0x5/0xfbef5 __tcp_push_pending_frames+0x56/0x190 tcp_push+0x117/0x310 tcp_sendmsg_locked+0x14c1/0x1740 tcp_sendmsg+0x28/0x40 inet_sendmsg+0x5d/0x90 sock_write_iter+0x242/0x2b0 vfs_write+0x68d/0x800 ? __pfx_sock_write_iter+0x10/0x10 ksys_write+0xc8/0xf0 __x64_sys_write+0x3d/0x50 x64_sys_call+0xfaf/0x1f50 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f4d143af992 Code: c3 8b 07 85 c0 75 24 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> e9 01 cc ff ff 41 54 b8 02 00 00 0 RSP: 002b:00007ffd65032058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f4d143af992 RDX: 0000000000000025 RSI: 00007f4d143f3bcc RDI: 0000000000000005 RBP: 00007f4d143f2b28 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4d143f3bcc R13: 0000000000000005 R14: 0000000000000000 R15: 00007ffd650323f0 </TASK> Fixes: 0b2c597 ("l2tp: close all race conditions in l2tp_tunnel_register()") Suggested-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+6acef9e0a4d1f46c83d4@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6acef9e0a4d1f46c83d4 CC: gnault@redhat.com CC: cong.wang@bytedance.com Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Link: https://patch.msgid.link/20240806160626.1248317-1-jchapman@katalix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…complete_hypercall_exit() hygon inclusion category: bugfix CVE: NA --------------------------- In the commit b5aead0 ("KVM: x86: Assume a 64-bit hypercall for guests with protected state"), is_64_bit_mode() will trigger warning, as the following messages, for SEV-ES or CSV2 guest. [85350.053201] ------------[ cut here ]------------ [85350.053206] WARNING: CPU: 2 PID: 68989 at arch/x86/kvm/x86.h:156 complete_hypercall_exit+0x6a/0x70 [kvm] [85350.053299] Modules linked in: kvm_amd(OE) kvm(OE) ccp(E) irqbypass(E) vhost_net(E) vhost(E) vhost_iotlb(E) tap(E) fuse(E) xt_CHECKSUM(E) xt_MASQUERADE(E) xt_conntrack(E) ipt_REJECT(E) nf_reject_ipv4(E) ip6table_mangle(E) ip6table_nat(E) iptable_mangle(E) iptable_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) nf_tables(E) libcrc32c(E) nfnetlink(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) tun(E) bridge(E) stp(E) llc(E) rfkill(E) vfat(E) fat(E) binfmt_misc(E) intel_rapl_msr(E) intel_rapl_common(E) amd64_edac(E) edac_mce_amd(E) crct10dif_pclmul(E) crc32_pclmul(E) acpi_ipmi(E) ipmi_ssif(E) ipmi_si(E) ast(E) joydev(E) mousedev(E) ghash_clmulni_intel(E) rapl(E) ipmi_devintf(E) drm_shmem_helper(E) drm_kms_helper(E) ipmi_msghandler(E) sg(E) k10temp(E) acpi_cpufreq(E) squashfs(E) loop(E) parport_pc(E) ppdev(E) lp(E) parport(E) drm(E) ip_tables(E) sd_mod(E) t10_pi(E) crc64_rocksoft(E) crc64(E) ahci(E) igb(E) i2c_designware_platform(E) libahci(E) i2c_algo_bit(E) dca(E) i2c_piix4(E) [85350.053421] i2c_designware_core(E) crc32c_intel(E) libata(E) i2c_core(E) [last unloaded: kvm(OE)] [85350.053432] CPU: 2 PID: 68989 Comm: qemu-system-x86 Tainted: GF W OE 6.6.7-for-openanolis deepin-community#5 [85350.053438] Hardware name: HYGON HongHaiA1b/HongHaiA1, BIOS A1633050 02/02/2023 [85350.053441] RIP: 0010:complete_hypercall_exit+0x6a/0x70 [kvm] [85350.053511] Code: e8 9b fb ff ff 48 83 c4 08 5b 5d e9 60 68 68 d8 48 8d 54 24 04 48 89 e6 48 89 ef e8 40 db 12 00 8b 44 24 04 85 c0 74 c4 eb c4 <0f> 0b eb b5 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 [85350.053514] RSP: 0018:ffffc90000ea3e28 EFLAGS: 00010202 [85350.053519] RAX: ffff8881419f0000 RBX: 0000000000000000 RCX: ffff8881003ad780 [85350.053522] RDX: 0000606fc0a29bc0 RSI: 00000000fffffe01 RDI: ffff888b5dc20000 [85350.053525] RBP: ffff888b5dc20000 R08: 0000000000000001 R09: 0000000000000000 [85350.053527] R10: ffffc90000ea3ee8 R11: 0000000000000000 R12: ffff88810fe1ea00 [85350.053530] R13: ffff888b5dc20000 R14: ffff888b5dc20048 R15: 0000000000000000 [85350.053532] FS: 00007eff45528700(0000) GS:ffff88903f080000(0000) knlGS:0000000000000000 [85350.053536] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [85350.053539] CR2: 0000000000000000 CR3: 00000001415d2000 CR4: 00000000003506e0 [85350.053541] Call Trace: [85350.053545] <TASK> [85350.053550] ? __warn+0x84/0x140 [85350.053558] ? complete_hypercall_exit+0x6a/0x70 [kvm] [85350.053627] ? report_bug+0x1bd/0x1d0 [85350.053635] ? handle_bug+0x3c/0x70 [85350.053640] ? exc_invalid_op+0x18/0x70 [85350.053645] ? asm_exc_invalid_op+0x1a/0x20 [85350.053655] ? complete_hypercall_exit+0x6a/0x70 [kvm] [85350.053724] kvm_arch_vcpu_ioctl_run+0x3dd/0x410 [kvm] [85350.053796] kvm_vcpu_ioctl+0x277/0x6c0 [kvm] [85350.053855] __x64_sys_ioctl+0x92/0xd0 [85350.053864] do_syscall_64+0x3f/0x90 [85350.053868] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [85350.053874] RIP: 0033:0x7eff486c33ab [85350.053878] Code: 0f 1e fa 48 8b 05 e5 7a 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b5 7a 0d 00 f7 d8 64 89 01 48 [85350.053881] RSP: 002b:00007eff45527848 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [85350.053886] RAX: ffffffffffffffda RBX: 000000000000ae80 RCX: 00007eff486c33ab [85350.053888] RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000010 [85350.053891] RBP: 0000563586e32430 R08: 0000563584ff1d30 R09: 00007eff455276a4 [85350.053893] R10: 00007eff4552769c R11: 0000000000000246 R12: 0000000000000000 [85350.053896] R13: 00005635856bcd60 R14: 0000000000000000 R15: 0000000000000000 [85350.053904] </TASK> [85350.053906] ---[ end trace 0000000000000000 ]--- Use is_64_bit_hypercall() instead of is_64_bit_mode() in complete_hypercall_exit() to avoid warning when the SEV-ES or CSV2 guest invoking KVM_HC_MAP_GPA_RANGE hypercall. Fixes: b5aead0 ("KVM: x86: Assume a 64-bit hypercall for guests with protected state") Signed-off-by: hanliyang <hanliyang@hygon.cn>

…complete_hypercall_exit() hygon inclusion category: bugfix CVE: NA --------------------------- In the commit b5aead0 ("KVM: x86: Assume a 64-bit hypercall for guests with protected state"), is_64_bit_mode() will trigger warning, as the following messages, for SEV-ES or CSV2 guest. [85350.053201] ------------[ cut here ]------------ [85350.053206] WARNING: CPU: 2 PID: 68989 at arch/x86/kvm/x86.h:156 complete_hypercall_exit+0x6a/0x70 [kvm] [85350.053299] Modules linked in: kvm_amd(OE) kvm(OE) ccp(E) irqbypass(E) vhost_net(E) vhost(E) vhost_iotlb(E) tap(E) fuse(E) xt_CHECKSUM(E) xt_MASQUERADE(E) xt_conntrack(E) ipt_REJECT(E) nf_reject_ipv4(E) ip6table_mangle(E) ip6table_nat(E) iptable_mangle(E) iptable_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) nf_tables(E) libcrc32c(E) nfnetlink(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) tun(E) bridge(E) stp(E) llc(E) rfkill(E) vfat(E) fat(E) binfmt_misc(E) intel_rapl_msr(E) intel_rapl_common(E) amd64_edac(E) edac_mce_amd(E) crct10dif_pclmul(E) crc32_pclmul(E) acpi_ipmi(E) ipmi_ssif(E) ipmi_si(E) ast(E) joydev(E) mousedev(E) ghash_clmulni_intel(E) rapl(E) ipmi_devintf(E) drm_shmem_helper(E) drm_kms_helper(E) ipmi_msghandler(E) sg(E) k10temp(E) acpi_cpufreq(E) squashfs(E) loop(E) parport_pc(E) ppdev(E) lp(E) parport(E) drm(E) ip_tables(E) sd_mod(E) t10_pi(E) crc64_rocksoft(E) crc64(E) ahci(E) igb(E) i2c_designware_platform(E) libahci(E) i2c_algo_bit(E) dca(E) i2c_piix4(E) [85350.053421] i2c_designware_core(E) crc32c_intel(E) libata(E) i2c_core(E) [last unloaded: kvm(OE)] [85350.053432] CPU: 2 PID: 68989 Comm: qemu-system-x86 Tainted: GF W OE 6.6.7-for-openanolis #5 [85350.053438] Hardware name: HYGON HongHaiA1b/HongHaiA1, BIOS A1633050 02/02/2023 [85350.053441] RIP: 0010:complete_hypercall_exit+0x6a/0x70 [kvm] [85350.053511] Code: e8 9b fb ff ff 48 83 c4 08 5b 5d e9 60 68 68 d8 48 8d 54 24 04 48 89 e6 48 89 ef e8 40 db 12 00 8b 44 24 04 85 c0 74 c4 eb c4 <0f> 0b eb b5 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 [85350.053514] RSP: 0018:ffffc90000ea3e28 EFLAGS: 00010202 [85350.053519] RAX: ffff8881419f0000 RBX: 0000000000000000 RCX: ffff8881003ad780 [85350.053522] RDX: 0000606fc0a29bc0 RSI: 00000000fffffe01 RDI: ffff888b5dc20000 [85350.053525] RBP: ffff888b5dc20000 R08: 0000000000000001 R09: 0000000000000000 [85350.053527] R10: ffffc90000ea3ee8 R11: 0000000000000000 R12: ffff88810fe1ea00 [85350.053530] R13: ffff888b5dc20000 R14: ffff888b5dc20048 R15: 0000000000000000 [85350.053532] FS: 00007eff45528700(0000) GS:ffff88903f080000(0000) knlGS:0000000000000000 [85350.053536] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [85350.053539] CR2: 0000000000000000 CR3: 00000001415d2000 CR4: 00000000003506e0 [85350.053541] Call Trace: [85350.053545] <TASK> [85350.053550] ? __warn+0x84/0x140 [85350.053558] ? complete_hypercall_exit+0x6a/0x70 [kvm] [85350.053627] ? report_bug+0x1bd/0x1d0 [85350.053635] ? handle_bug+0x3c/0x70 [85350.053640] ? exc_invalid_op+0x18/0x70 [85350.053645] ? asm_exc_invalid_op+0x1a/0x20 [85350.053655] ? complete_hypercall_exit+0x6a/0x70 [kvm] [85350.053724] kvm_arch_vcpu_ioctl_run+0x3dd/0x410 [kvm] [85350.053796] kvm_vcpu_ioctl+0x277/0x6c0 [kvm] [85350.053855] __x64_sys_ioctl+0x92/0xd0 [85350.053864] do_syscall_64+0x3f/0x90 [85350.053868] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [85350.053874] RIP: 0033:0x7eff486c33ab [85350.053878] Code: 0f 1e fa 48 8b 05 e5 7a 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b5 7a 0d 00 f7 d8 64 89 01 48 [85350.053881] RSP: 002b:00007eff45527848 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [85350.053886] RAX: ffffffffffffffda RBX: 000000000000ae80 RCX: 00007eff486c33ab [85350.053888] RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000010 [85350.053891] RBP: 0000563586e32430 R08: 0000563584ff1d30 R09: 00007eff455276a4 [85350.053893] R10: 00007eff4552769c R11: 0000000000000246 R12: 0000000000000000 [85350.053896] R13: 00005635856bcd60 R14: 0000000000000000 R15: 0000000000000000 [85350.053904] </TASK> [85350.053906] ---[ end trace 0000000000000000 ]--- Use is_64_bit_hypercall() instead of is_64_bit_mode() in complete_hypercall_exit() to avoid warning when the SEV-ES or CSV2 guest invoking KVM_HC_MAP_GPA_RANGE hypercall. Fixes: b5aead0 ("KVM: x86: Assume a 64-bit hypercall for guests with protected state") Signed-off-by: hanliyang <hanliyang@hygon.cn>

…complete_hypercall_exit() hygon inclusion category: bugfix CVE: NA --------------------------- In the commit b5aead0 ("KVM: x86: Assume a 64-bit hypercall for guests with protected state"), is_64_bit_mode() will trigger warning, as the following messages, for SEV-ES or CSV2 guest. [85350.053201] ------------[ cut here ]------------ [85350.053206] WARNING: CPU: 2 PID: 68989 at arch/x86/kvm/x86.h:156 complete_hypercall_exit+0x6a/0x70 [kvm] [85350.053299] Modules linked in: kvm_amd(OE) kvm(OE) ccp(E) irqbypass(E) vhost_net(E) vhost(E) vhost_iotlb(E) tap(E) fuse(E) xt_CHECKSUM(E) xt_MASQUERADE(E) xt_conntrack(E) ipt_REJECT(E) nf_reject_ipv4(E) ip6table_mangle(E) ip6table_nat(E) iptable_mangle(E) iptable_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) nf_tables(E) libcrc32c(E) nfnetlink(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) tun(E) bridge(E) stp(E) llc(E) rfkill(E) vfat(E) fat(E) binfmt_misc(E) intel_rapl_msr(E) intel_rapl_common(E) amd64_edac(E) edac_mce_amd(E) crct10dif_pclmul(E) crc32_pclmul(E) acpi_ipmi(E) ipmi_ssif(E) ipmi_si(E) ast(E) joydev(E) mousedev(E) ghash_clmulni_intel(E) rapl(E) ipmi_devintf(E) drm_shmem_helper(E) drm_kms_helper(E) ipmi_msghandler(E) sg(E) k10temp(E) acpi_cpufreq(E) squashfs(E) loop(E) parport_pc(E) ppdev(E) lp(E) parport(E) drm(E) ip_tables(E) sd_mod(E) t10_pi(E) crc64_rocksoft(E) crc64(E) ahci(E) igb(E) i2c_designware_platform(E) libahci(E) i2c_algo_bit(E) dca(E) i2c_piix4(E) [85350.053421] i2c_designware_core(E) crc32c_intel(E) libata(E) i2c_core(E) [last unloaded: kvm(OE)] [85350.053432] CPU: 2 PID: 68989 Comm: qemu-system-x86 Tainted: GF W OE 6.6.7-for-openanolis deepin-community#5 [85350.053438] Hardware name: HYGON HongHaiA1b/HongHaiA1, BIOS A1633050 02/02/2023 [85350.053441] RIP: 0010:complete_hypercall_exit+0x6a/0x70 [kvm] [85350.053511] Code: e8 9b fb ff ff 48 83 c4 08 5b 5d e9 60 68 68 d8 48 8d 54 24 04 48 89 e6 48 89 ef e8 40 db 12 00 8b 44 24 04 85 c0 74 c4 eb c4 <0f> 0b eb b5 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 [85350.053514] RSP: 0018:ffffc90000ea3e28 EFLAGS: 00010202 [85350.053519] RAX: ffff8881419f0000 RBX: 0000000000000000 RCX: ffff8881003ad780 [85350.053522] RDX: 0000606fc0a29bc0 RSI: 00000000fffffe01 RDI: ffff888b5dc20000 [85350.053525] RBP: ffff888b5dc20000 R08: 0000000000000001 R09: 0000000000000000 [85350.053527] R10: ffffc90000ea3ee8 R11: 0000000000000000 R12: ffff88810fe1ea00 [85350.053530] R13: ffff888b5dc20000 R14: ffff888b5dc20048 R15: 0000000000000000 [85350.053532] FS: 00007eff45528700(0000) GS:ffff88903f080000(0000) knlGS:0000000000000000 [85350.053536] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [85350.053539] CR2: 0000000000000000 CR3: 00000001415d2000 CR4: 00000000003506e0 [85350.053541] Call Trace: [85350.053545] <TASK> [85350.053550] ? __warn+0x84/0x140 [85350.053558] ? complete_hypercall_exit+0x6a/0x70 [kvm] [85350.053627] ? report_bug+0x1bd/0x1d0 [85350.053635] ? handle_bug+0x3c/0x70 [85350.053640] ? exc_invalid_op+0x18/0x70 [85350.053645] ? asm_exc_invalid_op+0x1a/0x20 [85350.053655] ? complete_hypercall_exit+0x6a/0x70 [kvm] [85350.053724] kvm_arch_vcpu_ioctl_run+0x3dd/0x410 [kvm] [85350.053796] kvm_vcpu_ioctl+0x277/0x6c0 [kvm] [85350.053855] __x64_sys_ioctl+0x92/0xd0 [85350.053864] do_syscall_64+0x3f/0x90 [85350.053868] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [85350.053874] RIP: 0033:0x7eff486c33ab [85350.053878] Code: 0f 1e fa 48 8b 05 e5 7a 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b5 7a 0d 00 f7 d8 64 89 01 48 [85350.053881] RSP: 002b:00007eff45527848 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [85350.053886] RAX: ffffffffffffffda RBX: 000000000000ae80 RCX: 00007eff486c33ab [85350.053888] RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000010 [85350.053891] RBP: 0000563586e32430 R08: 0000563584ff1d30 R09: 00007eff455276a4 [85350.053893] R10: 00007eff4552769c R11: 0000000000000246 R12: 0000000000000000 [85350.053896] R13: 00005635856bcd60 R14: 0000000000000000 R15: 0000000000000000 [85350.053904] </TASK> [85350.053906] ---[ end trace 0000000000000000 ]--- Use is_64_bit_hypercall() instead of is_64_bit_mode() in complete_hypercall_exit() to avoid warning when the SEV-ES or CSV2 guest invoking KVM_HC_MAP_GPA_RANGE hypercall. Fixes: b5aead0 ("KVM: x86: Assume a 64-bit hypercall for guests with protected state") Signed-off-by: hanliyang <hanliyang@hygon.cn>

[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 deepin-community#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 deepin-community#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e deepin-community#3 [fffffe00003fced0] do_nmi at ffffffff8922660d deepin-community#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 deepin-community#5 [ffffa655314979e8] io_serial_in at ffffffff89792594 deepin-community#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 deepin-community#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 deepin-community#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 deepin-community#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 deepin-community#10 [ffffa65531497ac8] console_unlock at ffffffff89316124 deepin-community#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 deepin-community#12 [ffffa65531497b68] printk at ffffffff89318306 deepin-community#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 deepin-community#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] deepin-community#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] deepin-community#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] deepin-community#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] deepin-community#18 [ffffa65531497f10] kthread at ffffffff892d2e72 deepin-community#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 9e985cb upstream. Drop support for virtualizing adaptive PEBS, as KVM's implementation is architecturally broken without an obvious/easy path forward, and because exposing adaptive PEBS can leak host LBRs to the guest, i.e. can leak host kernel addresses to the guest. Bug deepin-community#1 is that KVM doesn't account for the upper 32 bits of IA32_FIXED_CTR_CTRL when (re)programming fixed counters, e.g fixed_ctrl_field() drops the upper bits, reprogram_fixed_counters() stores local variables as u8s and truncates the upper bits too, etc. Bug deepin-community#2 is that, because KVM _always_ sets precise_ip to a non-zero value for PEBS events, perf will _always_ generate an adaptive record, even if the guest requested a basic record. Note, KVM will also enable adaptive PEBS in individual *counter*, even if adaptive PEBS isn't exposed to the guest, but this is benign as MSR_PEBS_DATA_CFG is guaranteed to be zero, i.e. the guest will only ever see Basic records. Bug deepin-community#3 is in perf. intel_pmu_disable_fixed() doesn't clear the upper bits either, i.e. leaves ICL_FIXED_0_ADAPTIVE set, and intel_pmu_enable_fixed() effectively doesn't clear ICL_FIXED_0_ADAPTIVE either. I.e. perf _always_ enables ADAPTIVE counters, regardless of what KVM requests. Bug deepin-community#4 is that adaptive PEBS *might* effectively bypass event filters set by the host, as "Updated Memory Access Info Group" records information that might be disallowed by userspace via KVM_SET_PMU_EVENT_FILTER. Bug deepin-community#5 is that KVM doesn't ensure LBR MSRs hold guest values (or at least zeros) when entering a vCPU with adaptive PEBS, which allows the guest to read host LBRs, i.e. host RIPs/addresses, by enabling "LBR Entries" records. Disable adaptive PEBS support as an immediate fix due to the severity of the LBR leak in particular, and because fixing all of the bugs will be non-trivial, e.g. not suitable for backporting to stable kernels. Note! This will break live migration, but trying to make KVM play nice with live migration would be quite complicated, wouldn't be guaranteed to work (i.e. KVM might still kill/confuse the guest), and it's not clear that there are any publicly available VMMs that support adaptive PEBS, let alone live migrate VMs that support adaptive PEBS, e.g. QEMU doesn't support PEBS in any capacity. Link: https://lore.kernel.org/all/20240306230153.786365-1-seanjc@google.com Link: https://lore.kernel.org/all/ZeepGjHCeSfadANM@google.com Fixes: c59a1f1 ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS") Cc: stable@vger.kernel.org Cc: Like Xu <like.xu.linux@gmail.com> Cc: Mingwei Zhang <mizhang@google.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhang Xiong <xiong.y.zhang@intel.com> Cc: Lv Zhiyuan <zhiyuan.lv@intel.com> Cc: Dapeng Mi <dapeng1.mi@intel.com> Cc: Jim Mattson <jmattson@google.com> Acked-by: Like Xu <likexu@tencent.com> Link: https://lore.kernel.org/r/20240307005833.827147-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 89f9a1e upstream. On the time to free xbc memory in xbc_exit(), memblock may has handed over memory to buddy allocator. So it doesn't make sense to free memory back to memblock. memblock_free() called by xbc_exit() even causes UAF bugs on architectures with CONFIG_ARCH_KEEP_MEMBLOCK disabled like x86. Following KASAN logs shows this case. This patch fixes the xbc memory free problem by calling memblock_free() in early xbc init error rewind path and calling memblock_free_late() in xbc exit path to free memory to buddy allocator. [ 9.410890] ================================================================== [ 9.418962] BUG: KASAN: use-after-free in memblock_isolate_range+0x12d/0x260 [ 9.426850] Read of size 8 at addr ffff88845dd30000 by task swapper/0/1 [ 9.435901] CPU: 9 PID: 1 Comm: swapper/0 Tainted: G U 6.9.0-rc3-00208-g586b5dfb51b9 deepin-community#5 [ 9.446403] Hardware name: Intel Corporation RPLP LP5 (CPU:RaptorLake)/RPLP LP5 (ID:13), BIOS IRPPN02.01.01.00.00.19.015.D-00000000 Dec 28 2023 [ 9.460789] Call Trace: [ 9.463518] <TASK> [ 9.465859] dump_stack_lvl+0x53/0x70 [ 9.469949] print_report+0xce/0x610 [ 9.473944] ? __virt_addr_valid+0xf5/0x1b0 [ 9.478619] ? memblock_isolate_range+0x12d/0x260 [ 9.483877] kasan_report+0xc6/0x100 [ 9.487870] ? memblock_isolate_range+0x12d/0x260 [ 9.493125] memblock_isolate_range+0x12d/0x260 [ 9.498187] memblock_phys_free+0xb4/0x160 [ 9.502762] ? __pfx_memblock_phys_free+0x10/0x10 [ 9.508021] ? mutex_unlock+0x7e/0xd0 [ 9.512111] ? __pfx_mutex_unlock+0x10/0x10 [ 9.516786] ? kernel_init_freeable+0x2d4/0x430 [ 9.521850] ? __pfx_kernel_init+0x10/0x10 [ 9.526426] xbc_exit+0x17/0x70 [ 9.529935] kernel_init+0x38/0x1e0 [ 9.533829] ? _raw_spin_unlock_irq+0xd/0x30 [ 9.538601] ret_from_fork+0x2c/0x50 [ 9.542596] ? __pfx_kernel_init+0x10/0x10 [ 9.547170] ret_from_fork_asm+0x1a/0x30 [ 9.551552] </TASK> [ 9.555649] The buggy address belongs to the physical page: [ 9.561875] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x45dd30 [ 9.570821] flags: 0x200000000000000(node=0|zone=2) [ 9.576271] page_type: 0xffffffff() [ 9.580167] raw: 0200000000000000 ffffea0011774c48 ffffea0012ba1848 0000000000000000 [ 9.588823] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 [ 9.597476] page dumped because: kasan: bad access detected [ 9.605362] Memory state around the buggy address: [ 9.610714] ffff88845dd2ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 9.618786] ffff88845dd2ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 9.626857] >ffff88845dd30000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.634930] ^ [ 9.638534] ffff88845dd30080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.646605] ffff88845dd30100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.654675] ================================================================== Link: https://lore.kernel.org/all/20240414114944.1012359-1-qiang4.zhang@linux.intel.com/ Fixes: 40caa12 ("init: bootconfig: Remove all bootconfig data when the init memory is removed") Cc: Stable@vger.kernel.org Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ac01c8c4246546fd8340a232f3ada1921dc0ee48 upstream. AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 deepin-community#3 0x5650d804568f in __hists__add_entry util/hist.c:754 deepin-community#4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 deepin-community#5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 deepin-community#6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 deepin-community#7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 deepin-community#8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 deepin-community#9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 deepin-community#10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 deepin-community#11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 deepin-community#12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 deepin-community#13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <yunzhao@cloudflare.com> Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com> Cc: Ian Rogers <irogers@google.com> Cc: kernel-team@cloudflare.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org # v5.13+ Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9af2efee41b27a0f386fb5aa95d8d0b4b5d9fede upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 deepin-community#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 deepin-community#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 deepin-community#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 deepin-community#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 deepin-community#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 deepin-community#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 deepin-community#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 deepin-community#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 deepin-community#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 deepin-community#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 deepin-community#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 deepin-community#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 deepin-community#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 deepin-community#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 deepin-community#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Matt Fleming <matt@readmodwrite.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ac01c8c4246546fd8340a232f3ada1921dc0ee48 upstream. AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 deepin-community#3 0x5650d804568f in __hists__add_entry util/hist.c:754 deepin-community#4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 deepin-community#5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 deepin-community#6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 deepin-community#7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 deepin-community#8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 deepin-community#9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 deepin-community#10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 deepin-community#11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 deepin-community#12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 deepin-community#13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <yunzhao@cloudflare.com> Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com> Cc: Ian Rogers <irogers@google.com> Cc: kernel-team@cloudflare.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org # v5.13+ Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9af2efee41b27a0f386fb5aa95d8d0b4b5d9fede upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 deepin-community#3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 deepin-community#4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 deepin-community#5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 deepin-community#6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 deepin-community#7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 deepin-community#8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 deepin-community#9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 deepin-community#10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 deepin-community#11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 deepin-community#12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 deepin-community#13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 deepin-community#14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 deepin-community#15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 deepin-community#16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 deepin-community#17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Matt Fleming <matt@readmodwrite.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ac01c8c4246546fd8340a232f3ada1921dc0ee48 upstream. AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 #3 0x5650d804568f in __hists__add_entry util/hist.c:754 #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <yunzhao@cloudflare.com> Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com> Cc: Ian Rogers <irogers@google.com> Cc: kernel-team@cloudflare.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org # v5.13+ Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9af2efee41b27a0f386fb5aa95d8d0b4b5d9fede upstream. The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c4246546fd ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Matt Fleming <matt@readmodwrite.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…tion to perf_sched__replay() [ Upstream commit c690786 ] The start_work_mutex and work_done_wait_mutex are used only for the 'perf sched replay'. Put their initialization in perf_sched__replay () to reduce unnecessary actions in other commands. Simple functional testing: # perf sched record perf bench sched messaging # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.197 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 14.952 MB perf.data (134165 samples) ] # perf sched replay run measurement overhead: 108 nsecs sleep measurement overhead: 65658 nsecs the run test took 999991 nsecs the sleep test took 1079324 nsecs nr_run_events: 42378 nr_sleep_events: 43102 nr_wakeup_events: 31852 target-less wakeups: 17 multi-target wakeups: 712 task 0 ( swapper: 0), nr_events: 10451 task 1 ( swapper: 1), nr_events: 3 task 2 ( swapper: 2), nr_events: 1 <SNIP> task 717 ( sched-messaging: 74483), nr_events: 152 task 718 ( sched-messaging: 74484), nr_events: 1944 task 719 ( sched-messaging: 74485), nr_events: 73 task 720 ( sched-messaging: 74486), nr_events: 163 task 721 ( sched-messaging: 74487), nr_events: 942 task 722 ( sched-messaging: 74488), nr_events: 78 task 723 ( sched-messaging: 74489), nr_events: 1090 ------------------------------------------------------------ #1 : 1366.507, ravg: 1366.51, cpu: 7682.70 / 7682.70 #2 : 1410.072, ravg: 1370.86, cpu: 7723.88 / 7686.82 #3 : 1396.296, ravg: 1373.41, cpu: 7568.20 / 7674.96 #4 : 1381.019, ravg: 1374.17, cpu: 7531.81 / 7660.64 #5 : 1393.826, ravg: 1376.13, cpu: 7725.25 / 7667.11 #6 : 1401.581, ravg: 1378.68, cpu: 7594.82 / 7659.88 #7 : 1381.337, ravg: 1378.94, cpu: 7371.22 / 7631.01 #8 : 1373.842, ravg: 1378.43, cpu: 7894.92 / 7657.40 #9 : 1364.697, ravg: 1377.06, cpu: 7324.91 / 7624.15 #10 : 1363.613, ravg: 1375.72, cpu: 7209.55 / 7582.69 # echo $? 0 Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240206083228.172607-2-yangjihong1@huawei.com Stable-dep-of: 1a5efc9e13f3 ("libsubcmd: Don't free the usage string") Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 85ca3d45bd402b1b252e17b34ca0052d2a523cd3)

…f_sched__{lat|map|replay}() [ Upstream commit bd2cdf2 ] The curr_pid and cpu_last_switched are used only for the 'perf sched replay/latency/map'. Put their initialization in perf_sched__{lat|map|replay () to reduce unnecessary actions in other commands. Simple functional testing: # perf sched record perf bench sched messaging # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.209 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ] # perf sched lat ------------------------------------------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end | ------------------------------------------------------------------------------------------------------------------------------------------- sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s <SNIP> ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s ----------------------------------------------------------------------------------------------------------------- TOTAL: | 3180.750 ms | 41368 | --------------------------------------------------- # echo $? 0 # perf sched map *A0 456532.510141 secs A0 => migration/0:15 *. 456532.510171 secs . => swapper:0 . *B0 456532.510261 secs B0 => migration/1:21 . *. 456532.510279 secs <SNIP> L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs # echo $? 0 # perf sched replay run measurement overhead: 108 nsecs sleep measurement overhead: 66473 nsecs the run test took 1000002 nsecs the sleep test took 1082686 nsecs nr_run_events: 49334 nr_sleep_events: 50054 nr_wakeup_events: 34701 target-less wakeups: 165 multi-target wakeups: 766 task 0 ( swapper: 0), nr_events: 15419 task 1 ( swapper: 1), nr_events: 1 task 2 ( swapper: 2), nr_events: 1 <SNIP> task 715 ( sched-messaging: 110248), nr_events: 1438 task 716 ( sched-messaging: 110249), nr_events: 512 task 717 ( sched-messaging: 110250), nr_events: 500 task 718 ( sched-messaging: 110251), nr_events: 537 task 719 ( sched-messaging: 110252), nr_events: 823 ------------------------------------------------------------ #1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35 #2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56 #3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39 #4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86 #5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34 #6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39 #7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09 #8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57 #9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90 #10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07 # echo $? 0 Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com Stable-dep-of: 1a5efc9e13f3 ("libsubcmd: Don't free the usage string") Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 03cec19f546de992f5685afe6ef55741795d068b)

[ Upstream commit a848c29e3486189aaabd5663bc11aea50c5bd144 ] On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828 [232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a [232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058 [232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000 [232066.601636] Call trace: [232066.601749] nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.601998] nfs4_do_reclaim+0x1b8/0x28c [nfsv4] [232066.602218] nfs4_state_manager+0x928/0x10f0 [nfsv4] [232066.602455] nfs4_run_state_manager+0x78/0x1b0 [nfsv4] [232066.602690] kthread+0x110/0x114 [232066.602830] ret_from_fork+0x10/0x20 [232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00) [232066.603284] SMP: stopping secondary CPUs [232066.606936] Starting crashdump kernel... [232066.607146] Bye! Analysing the vmcore, we know that nfs4_copy_state listed by destination nfs_server->ss_copies was added by the field copies in handle_async_copy(), and we found a waiting copy process with the stack as: PID: 3511963 TASK: ffff710028b47e00 CPU: 0 COMMAND: "cp" #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4 #1 [ffff8001116ef760] __schedule at ffff800008dd0650 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4] #7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4] #8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4] #9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4] The NULL-pointer dereference was due to nfs42_complete_copies() listed the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state. So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and the data accessed through this pointer was also incorrect. Generally, the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state(). When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED and copies are not deleted in nfs_server->ss_copies, the source state may be passed to the nfs42_complete_copies() process earlier, resulting in this crash scene finally. To solve this issue, we add a list_head nfs_server->ss_src_copies for a server-to-server copy specially. Fixes: 0e65a32 ("NFS: handle source server reboot") Signed-off-by: Yanjun Zhang <zhangyanjun@cestc.cn> Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit fca41e5fa4914d12b2136c25f9dad69520b52683)

…tion to perf_sched__replay() [ Upstream commit c690786 ] The start_work_mutex and work_done_wait_mutex are used only for the 'perf sched replay'. Put their initialization in perf_sched__replay () to reduce unnecessary actions in other commands. Simple functional testing: # perf sched record perf bench sched messaging # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.197 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 14.952 MB perf.data (134165 samples) ] # perf sched replay run measurement overhead: 108 nsecs sleep measurement overhead: 65658 nsecs the run test took 999991 nsecs the sleep test took 1079324 nsecs nr_run_events: 42378 nr_sleep_events: 43102 nr_wakeup_events: 31852 target-less wakeups: 17 multi-target wakeups: 712 task 0 ( swapper: 0), nr_events: 10451 task 1 ( swapper: 1), nr_events: 3 task 2 ( swapper: 2), nr_events: 1 <SNIP> task 717 ( sched-messaging: 74483), nr_events: 152 task 718 ( sched-messaging: 74484), nr_events: 1944 task 719 ( sched-messaging: 74485), nr_events: 73 task 720 ( sched-messaging: 74486), nr_events: 163 task 721 ( sched-messaging: 74487), nr_events: 942 task 722 ( sched-messaging: 74488), nr_events: 78 task 723 ( sched-messaging: 74489), nr_events: 1090 ------------------------------------------------------------ #1 : 1366.507, ravg: 1366.51, cpu: 7682.70 / 7682.70 #2 : 1410.072, ravg: 1370.86, cpu: 7723.88 / 7686.82 #3 : 1396.296, ravg: 1373.41, cpu: 7568.20 / 7674.96 #4 : 1381.019, ravg: 1374.17, cpu: 7531.81 / 7660.64 #5 : 1393.826, ravg: 1376.13, cpu: 7725.25 / 7667.11 #6 : 1401.581, ravg: 1378.68, cpu: 7594.82 / 7659.88 #7 : 1381.337, ravg: 1378.94, cpu: 7371.22 / 7631.01 #8 : 1373.842, ravg: 1378.43, cpu: 7894.92 / 7657.40 #9 : 1364.697, ravg: 1377.06, cpu: 7324.91 / 7624.15 #10 : 1363.613, ravg: 1375.72, cpu: 7209.55 / 7582.69 # echo $? 0 Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240206083228.172607-2-yangjihong1@huawei.com Stable-dep-of: 1a5efc9e13f3 ("libsubcmd: Don't free the usage string") Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 85ca3d45bd402b1b252e17b34ca0052d2a523cd3)

…f_sched__{lat|map|replay}() [ Upstream commit bd2cdf2 ] The curr_pid and cpu_last_switched are used only for the 'perf sched replay/latency/map'. Put their initialization in perf_sched__{lat|map|replay () to reduce unnecessary actions in other commands. Simple functional testing: # perf sched record perf bench sched messaging # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.209 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ] # perf sched lat ------------------------------------------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end | ------------------------------------------------------------------------------------------------------------------------------------------- sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s <SNIP> ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s ----------------------------------------------------------------------------------------------------------------- TOTAL: | 3180.750 ms | 41368 | --------------------------------------------------- # echo $? 0 # perf sched map *A0 456532.510141 secs A0 => migration/0:15 *. 456532.510171 secs . => swapper:0 . *B0 456532.510261 secs B0 => migration/1:21 . *. 456532.510279 secs <SNIP> L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs # echo $? 0 # perf sched replay run measurement overhead: 108 nsecs sleep measurement overhead: 66473 nsecs the run test took 1000002 nsecs the sleep test took 1082686 nsecs nr_run_events: 49334 nr_sleep_events: 50054 nr_wakeup_events: 34701 target-less wakeups: 165 multi-target wakeups: 766 task 0 ( swapper: 0), nr_events: 15419 task 1 ( swapper: 1), nr_events: 1 task 2 ( swapper: 2), nr_events: 1 <SNIP> task 715 ( sched-messaging: 110248), nr_events: 1438 task 716 ( sched-messaging: 110249), nr_events: 512 task 717 ( sched-messaging: 110250), nr_events: 500 task 718 ( sched-messaging: 110251), nr_events: 537 task 719 ( sched-messaging: 110252), nr_events: 823 ------------------------------------------------------------ #1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35 #2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56 #3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39 #4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86 #5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34 #6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39 #7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09 #8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57 #9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90 #10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07 # echo $? 0 Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240206083228.172607-5-yangjihong1@huawei.com Stable-dep-of: 1a5efc9e13f3 ("libsubcmd: Don't free the usage string") Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 03cec19f546de992f5685afe6ef55741795d068b)

[ Upstream commit a848c29e3486189aaabd5663bc11aea50c5bd144 ] On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828 [232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a [232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058 [232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000 [232066.601636] Call trace: [232066.601749] nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.601998] nfs4_do_reclaim+0x1b8/0x28c [nfsv4] [232066.602218] nfs4_state_manager+0x928/0x10f0 [nfsv4] [232066.602455] nfs4_run_state_manager+0x78/0x1b0 [nfsv4] [232066.602690] kthread+0x110/0x114 [232066.602830] ret_from_fork+0x10/0x20 [232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00) [232066.603284] SMP: stopping secondary CPUs [232066.606936] Starting crashdump kernel... [232066.607146] Bye! Analysing the vmcore, we know that nfs4_copy_state listed by destination nfs_server->ss_copies was added by the field copies in handle_async_copy(), and we found a waiting copy process with the stack as: PID: 3511963 TASK: ffff710028b47e00 CPU: 0 COMMAND: "cp" #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4 #1 [ffff8001116ef760] __schedule at ffff800008dd0650 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4] #7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4] #8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4] #9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4] The NULL-pointer dereference was due to nfs42_complete_copies() listed the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state. So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and the data accessed through this pointer was also incorrect. Generally, the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state(). When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED and copies are not deleted in nfs_server->ss_copies, the source state may be passed to the nfs42_complete_copies() process earlier, resulting in this crash scene finally. To solve this issue, we add a list_head nfs_server->ss_src_copies for a server-to-server copy specially. Fixes: 0e65a32 ("NFS: handle source server reboot") Signed-off-by: Yanjun Zhang <zhangyanjun@cestc.cn> Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit fca41e5fa4914d12b2136c25f9dad69520b52683)

…ation commit c728a95ccf2a8ba544facfc30a4418d4c68c39f0 upstream. When testing the XDP_REDIRECT function on the LS1028A platform, we found a very reproducible issue that the Tx frames can no longer be sent out even if XDP_REDIRECT is turned off. Specifically, if there is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on, the console may display some warnings like "timeout for tx ring #6 clear", and all redirected frames will be dropped, the detailed log is as follows. root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2 Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc) [203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear [204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear [204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear eno0->eno2 1420505 rx/s 1420590 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420590 drop/s 0 drv_err/s 15.71 bulk-avg eno0->eno2 1420484 rx/s 1420485 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420485 drop/s 0 drv_err/s 15.71 bulk-avg By analyzing the XDP_REDIRECT implementation of enetc driver, the driver will reconfigure Tx and Rx BD rings when a bpf program is installed or uninstalled, but there is no mechanisms to block the redirected frames when enetc driver reconfigures rings. Similarly, XDP_TX verdicts on received frames can also lead to frames being enqueued in the Tx rings. Because XDP ignores the state set by the netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to suppress transmission of XDP frames. Fixes: c33bfaf ("net: enetc: set up XDP program under enetc_reconfigure()") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-3-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 37184349468a0919267179acbf7324a2de767f6b)

commit 348a1983cf4cf5099fc398438a968443af4c9f65 upstream. Luis has been reporting an assert failure when freeing an inode cluster during inode inactivation for a while. The assert looks like: XFS: Assertion failed: bp->b_flags & XBF_DONE, file: fs/xfs/xfs_trans_buf.c, line: 241 ------------[ cut here ]------------ kernel BUG at fs/xfs/xfs_message.c:102! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 73 Comm: kworker/4:1 Not tainted 6.10.0-rc1 #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: xfs-inodegc/loop5 xfs_inodegc_worker [xfs] RIP: 0010:assfail (fs/xfs/xfs_message.c:102) xfs RSP: 0018:ffff88810188f7f0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88816e748250 RCX: 1ffffffff844b0e7 RDX: 0000000000000004 RSI: ffff88810188f558 RDI: ffffffffc2431fa0 RBP: 1ffff11020311f01 R08: 0000000042431f9f R09: ffffed1020311e9b R10: ffff88810188f4df R11: ffffffffac725d70 R12: ffff88817a3f4000 R13: ffff88812182f000 R14: ffff88810188f998 R15: ffffffffc2423f80 FS: 0000000000000000(0000) GS:ffff8881c8400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fe9d0f109c CR3: 000000014426c002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> xfs_trans_read_buf_map (fs/xfs/xfs_trans_buf.c:241 (discriminator 1)) xfs xfs_imap_to_bp (fs/xfs/xfs_trans.h:210 fs/xfs/libxfs/xfs_inode_buf.c:138) xfs xfs_inode_item_precommit (fs/xfs/xfs_inode_item.c:145) xfs xfs_trans_run_precommits (fs/xfs/xfs_trans.c:931) xfs __xfs_trans_commit (fs/xfs/xfs_trans.c:966) xfs xfs_inactive_ifree (fs/xfs/xfs_inode.c:1811) xfs xfs_inactive (fs/xfs/xfs_inode.c:2013) xfs xfs_inodegc_worker (fs/xfs/xfs_icache.c:1841 fs/xfs/xfs_icache.c:1886) xfs process_one_work (kernel/workqueue.c:3231) worker_thread (kernel/workqueue.c:3306 (discriminator 2) kernel/workqueue.c:3393 (discriminator 2)) kthread (kernel/kthread.c:389) ret_from_fork (arch/x86/kernel/process.c:147) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> And occurs when the the inode precommit handlers is attempt to look up the inode cluster buffer to attach the inode for writeback. The trail of logic that I can reconstruct is as follows. 1. the inode is clean when inodegc runs, so it is not attached to a cluster buffer when precommit runs. 2. #1 implies the inode cluster buffer may be clean and not pinned by dirty inodes when inodegc runs. 3. #2 implies that the inode cluster buffer can be reclaimed by memory pressure at any time. 4. The assert failure implies that the cluster buffer was attached to the transaction, but not marked done. It had been accessed earlier in the transaction, but not marked done. 5. #4 implies the cluster buffer has been invalidated (i.e. marked stale). 6. #5 implies that the inode cluster buffer was instantiated uninitialised in the transaction in xfs_ifree_cluster(), which only instantiates the buffers to invalidate them and never marks them as done. Given factors 1-3, this issue is highly dependent on timing and environmental factors. Hence the issue can be very difficult to reproduce in some situations, but highly reliable in others. Luis has an environment where it can be reproduced easily by g/531 but, OTOH, I've reproduced it only once in ~2000 cycles of g/531. I think the fix is to have xfs_ifree_cluster() set the XBF_DONE flag on the cluster buffers, even though they may not be initialised. The reasons why I think this is safe are: 1. A buffer cache lookup hit on a XBF_STALE buffer will clear the XBF_DONE flag. Hence all future users of the buffer know they have to re-initialise the contents before use and mark it done themselves. 2. xfs_trans_binval() sets the XFS_BLI_STALE flag, which means the buffer remains locked until the journal commit completes and the buffer is unpinned. Hence once marked XBF_STALE/XFS_BLI_STALE by xfs_ifree_cluster(), the only context that can access the freed buffer is the currently running transaction. 3. #2 implies that future buffer lookups in the currently running transaction will hit the transaction match code and not the buffer cache. Hence XBF_STALE and XFS_BLI_STALE will not be cleared unless the transaction initialises and logs the buffer with valid contents again. At which point, the buffer will be marked marked XBF_DONE again, so having XBF_DONE already set on the stale buffer is a moot point. 4. #2 also implies that any concurrent access to that cluster buffer will block waiting on the buffer lock until the inode cluster has been fully freed and is no longer an active inode cluster buffer. 5. #4 + #1 means that any future user of the disk range of that buffer will always see the range of disk blocks covered by the cluster buffer as not done, and hence must initialise the contents themselves. 6. Setting XBF_DONE in xfs_ifree_cluster() then means the unlinked inode precommit code will see a XBF_DONE buffer from the transaction match as it expects. It can then attach the stale but newly dirtied inode to the stale but newly dirtied cluster buffer without unexpected failures. The stale buffer will then sail through the journal and do the right thing with the attached stale inode during unpin. Hence the fix is just one line of extra code. The explanation of why we have to set XBF_DONE in xfs_ifree_cluster, OTOH, is long and complex.... Fixes: 82842fe ("xfs: fix AGF vs inode cluster buffer deadlock") Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 740a427e8f45720bc43e2c380a19a5259d7abc06)

commit 3d041393ea8c815f773020fb4a995331a69c0139 upstream. Syzkaller reported a lockdep splat: ============================================ WARNING: possible recursive locking detected 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Not tainted -------------------------------------------- syz-executor364/5113 is trying to acquire lock: ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 but task is already holding lock: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-slock-AF_INET); lock(k-slock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by syz-executor364/5113: #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x153/0x1b10 net/mptcp/protocol.c:1806 #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg_fastopen+0x11f/0x530 net/mptcp/protocol.c:1727 #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x5f/0x1b80 net/ipv4/ip_output.c:470 #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1390 net/ipv4/ip_output.c:228 #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: local_lock_acquire include/linux/local_lock_internal.h:29 [inline] #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x33b/0x15b0 net/core/dev.c:6104 #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x230/0x5f0 net/ipv4/ip_input.c:232 #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 stack backtrace: CPU: 0 UID: 0 PID: 5113 Comm: syz-executor364 Not tainted 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_deadlock kernel/locking/lockdep.c:3061 [inline] validate_chain+0x15d3/0x5900 kernel/locking/lockdep.c:3855 __lock_acquire+0x137a/0x2040 kernel/locking/lockdep.c:5142 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 mptcp_sk_clone_init+0x32/0x13c0 net/mptcp/protocol.c:3279 subflow_syn_recv_sock+0x931/0x1920 net/mptcp/subflow.c:874 tcp_check_req+0xfe4/0x1a20 net/ipv4/tcp_minisocks.c:853 tcp_v4_rcv+0x1c3e/0x37f0 net/ipv4/tcp_ipv4.c:2267 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x1763/0x3e90 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:235 ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:535 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6542 [inline] tcp_rcv_state_process+0x2c32/0x4570 net/ipv4/tcp_input.c:6729 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1934 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x214/0x350 net/core/sock.c:3004 release_sock+0x61/0x1f0 net/core/sock.c:3558 mptcp_sendmsg_fastopen+0x1ad/0x530 net/mptcp/protocol.c:1733 mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1812 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f04fb13a6b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 01 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd651f42d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f04fb13a6b9 RDX: 0000000000000001 RSI: 0000000020000d00 RDI: 0000000000000004 RBP: 00007ffd651f4310 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000020000080 R11: 0000000000000246 R12: 00000000000f4240 R13: 00007f04fb187449 R14: 00007ffd651f42f4 R15: 00007ffd651f4300 </TASK> As noted by Cong Wang, the splat is false positive, but the code path leading to the report is an unexpected one: a client is attempting an MPC handshake towards the in-kernel listener created by the in-kernel PM for a port based signal endpoint. Such connection will be never accepted; many of them can make the listener queue full and preventing the creation of MPJ subflow via such listener - its intended role. Explicitly detect this scenario at initial-syn time and drop the incoming MPC request. Fixes: 1729cf1 ("mptcp: create the listening socket for new port") Cc: stable@vger.kernel.org Reported-by: syzbot+f4aacdfef2c6a6529c3e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f4aacdfef2c6a6529c3e Cc: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-1-7faea8e6b6ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Conflicts in mib.[ch], because commit 6982826fe5e5 ("mptcp: fallback to TCP after SYN+MPC drops"), and commit 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole") are linked to new features, not available in this version. Resolving the conflicts is easy, simply adding the new lines declaring the new "endpoint attempt" MIB entry. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 37d9305caace99024085dbe532e21df00f6f2bd0)

…ation commit c728a95ccf2a8ba544facfc30a4418d4c68c39f0 upstream. When testing the XDP_REDIRECT function on the LS1028A platform, we found a very reproducible issue that the Tx frames can no longer be sent out even if XDP_REDIRECT is turned off. Specifically, if there is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on, the console may display some warnings like "timeout for tx ring #6 clear", and all redirected frames will be dropped, the detailed log is as follows. root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2 Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc) [203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear [204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear [204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear eno0->eno2 1420505 rx/s 1420590 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420590 drop/s 0 drv_err/s 15.71 bulk-avg eno0->eno2 1420484 rx/s 1420485 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420485 drop/s 0 drv_err/s 15.71 bulk-avg By analyzing the XDP_REDIRECT implementation of enetc driver, the driver will reconfigure Tx and Rx BD rings when a bpf program is installed or uninstalled, but there is no mechanisms to block the redirected frames when enetc driver reconfigures rings. Similarly, XDP_TX verdicts on received frames can also lead to frames being enqueued in the Tx rings. Because XDP ignores the state set by the netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to suppress transmission of XDP frames. Fixes: c33bfaf ("net: enetc: set up XDP program under enetc_reconfigure()") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-3-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 37184349468a0919267179acbf7324a2de767f6b)

commit 348a1983cf4cf5099fc398438a968443af4c9f65 upstream. Luis has been reporting an assert failure when freeing an inode cluster during inode inactivation for a while. The assert looks like: XFS: Assertion failed: bp->b_flags & XBF_DONE, file: fs/xfs/xfs_trans_buf.c, line: 241 ------------[ cut here ]------------ kernel BUG at fs/xfs/xfs_message.c:102! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 73 Comm: kworker/4:1 Not tainted 6.10.0-rc1 #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: xfs-inodegc/loop5 xfs_inodegc_worker [xfs] RIP: 0010:assfail (fs/xfs/xfs_message.c:102) xfs RSP: 0018:ffff88810188f7f0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88816e748250 RCX: 1ffffffff844b0e7 RDX: 0000000000000004 RSI: ffff88810188f558 RDI: ffffffffc2431fa0 RBP: 1ffff11020311f01 R08: 0000000042431f9f R09: ffffed1020311e9b R10: ffff88810188f4df R11: ffffffffac725d70 R12: ffff88817a3f4000 R13: ffff88812182f000 R14: ffff88810188f998 R15: ffffffffc2423f80 FS: 0000000000000000(0000) GS:ffff8881c8400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fe9d0f109c CR3: 000000014426c002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> xfs_trans_read_buf_map (fs/xfs/xfs_trans_buf.c:241 (discriminator 1)) xfs xfs_imap_to_bp (fs/xfs/xfs_trans.h:210 fs/xfs/libxfs/xfs_inode_buf.c:138) xfs xfs_inode_item_precommit (fs/xfs/xfs_inode_item.c:145) xfs xfs_trans_run_precommits (fs/xfs/xfs_trans.c:931) xfs __xfs_trans_commit (fs/xfs/xfs_trans.c:966) xfs xfs_inactive_ifree (fs/xfs/xfs_inode.c:1811) xfs xfs_inactive (fs/xfs/xfs_inode.c:2013) xfs xfs_inodegc_worker (fs/xfs/xfs_icache.c:1841 fs/xfs/xfs_icache.c:1886) xfs process_one_work (kernel/workqueue.c:3231) worker_thread (kernel/workqueue.c:3306 (discriminator 2) kernel/workqueue.c:3393 (discriminator 2)) kthread (kernel/kthread.c:389) ret_from_fork (arch/x86/kernel/process.c:147) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> And occurs when the the inode precommit handlers is attempt to look up the inode cluster buffer to attach the inode for writeback. The trail of logic that I can reconstruct is as follows. 1. the inode is clean when inodegc runs, so it is not attached to a cluster buffer when precommit runs. 2. #1 implies the inode cluster buffer may be clean and not pinned by dirty inodes when inodegc runs. 3. #2 implies that the inode cluster buffer can be reclaimed by memory pressure at any time. 4. The assert failure implies that the cluster buffer was attached to the transaction, but not marked done. It had been accessed earlier in the transaction, but not marked done. 5. #4 implies the cluster buffer has been invalidated (i.e. marked stale). 6. #5 implies that the inode cluster buffer was instantiated uninitialised in the transaction in xfs_ifree_cluster(), which only instantiates the buffers to invalidate them and never marks them as done. Given factors 1-3, this issue is highly dependent on timing and environmental factors. Hence the issue can be very difficult to reproduce in some situations, but highly reliable in others. Luis has an environment where it can be reproduced easily by g/531 but, OTOH, I've reproduced it only once in ~2000 cycles of g/531. I think the fix is to have xfs_ifree_cluster() set the XBF_DONE flag on the cluster buffers, even though they may not be initialised. The reasons why I think this is safe are: 1. A buffer cache lookup hit on a XBF_STALE buffer will clear the XBF_DONE flag. Hence all future users of the buffer know they have to re-initialise the contents before use and mark it done themselves. 2. xfs_trans_binval() sets the XFS_BLI_STALE flag, which means the buffer remains locked until the journal commit completes and the buffer is unpinned. Hence once marked XBF_STALE/XFS_BLI_STALE by xfs_ifree_cluster(), the only context that can access the freed buffer is the currently running transaction. 3. #2 implies that future buffer lookups in the currently running transaction will hit the transaction match code and not the buffer cache. Hence XBF_STALE and XFS_BLI_STALE will not be cleared unless the transaction initialises and logs the buffer with valid contents again. At which point, the buffer will be marked marked XBF_DONE again, so having XBF_DONE already set on the stale buffer is a moot point. 4. #2 also implies that any concurrent access to that cluster buffer will block waiting on the buffer lock until the inode cluster has been fully freed and is no longer an active inode cluster buffer. 5. #4 + #1 means that any future user of the disk range of that buffer will always see the range of disk blocks covered by the cluster buffer as not done, and hence must initialise the contents themselves. 6. Setting XBF_DONE in xfs_ifree_cluster() then means the unlinked inode precommit code will see a XBF_DONE buffer from the transaction match as it expects. It can then attach the stale but newly dirtied inode to the stale but newly dirtied cluster buffer without unexpected failures. The stale buffer will then sail through the journal and do the right thing with the attached stale inode during unpin. Hence the fix is just one line of extra code. The explanation of why we have to set XBF_DONE in xfs_ifree_cluster, OTOH, is long and complex.... Fixes: 82842fe ("xfs: fix AGF vs inode cluster buffer deadlock") Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 740a427e8f45720bc43e2c380a19a5259d7abc06)

commit 3d041393ea8c815f773020fb4a995331a69c0139 upstream. Syzkaller reported a lockdep splat: ============================================ WARNING: possible recursive locking detected 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Not tainted -------------------------------------------- syz-executor364/5113 is trying to acquire lock: ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 but task is already holding lock: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-slock-AF_INET); lock(k-slock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by syz-executor364/5113: #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x153/0x1b10 net/mptcp/protocol.c:1806 #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg_fastopen+0x11f/0x530 net/mptcp/protocol.c:1727 #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x5f/0x1b80 net/ipv4/ip_output.c:470 #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1390 net/ipv4/ip_output.c:228 #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: local_lock_acquire include/linux/local_lock_internal.h:29 [inline] #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x33b/0x15b0 net/core/dev.c:6104 #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x230/0x5f0 net/ipv4/ip_input.c:232 #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 stack backtrace: CPU: 0 UID: 0 PID: 5113 Comm: syz-executor364 Not tainted 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_deadlock kernel/locking/lockdep.c:3061 [inline] validate_chain+0x15d3/0x5900 kernel/locking/lockdep.c:3855 __lock_acquire+0x137a/0x2040 kernel/locking/lockdep.c:5142 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 mptcp_sk_clone_init+0x32/0x13c0 net/mptcp/protocol.c:3279 subflow_syn_recv_sock+0x931/0x1920 net/mptcp/subflow.c:874 tcp_check_req+0xfe4/0x1a20 net/ipv4/tcp_minisocks.c:853 tcp_v4_rcv+0x1c3e/0x37f0 net/ipv4/tcp_ipv4.c:2267 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x1763/0x3e90 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:235 ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:535 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6542 [inline] tcp_rcv_state_process+0x2c32/0x4570 net/ipv4/tcp_input.c:6729 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1934 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x214/0x350 net/core/sock.c:3004 release_sock+0x61/0x1f0 net/core/sock.c:3558 mptcp_sendmsg_fastopen+0x1ad/0x530 net/mptcp/protocol.c:1733 mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1812 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f04fb13a6b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 01 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd651f42d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f04fb13a6b9 RDX: 0000000000000001 RSI: 0000000020000d00 RDI: 0000000000000004 RBP: 00007ffd651f4310 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000020000080 R11: 0000000000000246 R12: 00000000000f4240 R13: 00007f04fb187449 R14: 00007ffd651f42f4 R15: 00007ffd651f4300 </TASK> As noted by Cong Wang, the splat is false positive, but the code path leading to the report is an unexpected one: a client is attempting an MPC handshake towards the in-kernel listener created by the in-kernel PM for a port based signal endpoint. Such connection will be never accepted; many of them can make the listener queue full and preventing the creation of MPJ subflow via such listener - its intended role. Explicitly detect this scenario at initial-syn time and drop the incoming MPC request. Fixes: 1729cf1 ("mptcp: create the listening socket for new port") Cc: stable@vger.kernel.org Reported-by: syzbot+f4aacdfef2c6a6529c3e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f4aacdfef2c6a6529c3e Cc: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-1-7faea8e6b6ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ Conflicts in mib.[ch], because commit 6982826fe5e5 ("mptcp: fallback to TCP after SYN+MPC drops"), and commit 27069e7cb3d1 ("mptcp: disable active MPTCP in case of blackhole") are linked to new features, not available in this version. Resolving the conflicts is easy, simply adding the new lines declaring the new "endpoint attempt" MIB entry. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 37d9305caace99024085dbe532e21df00f6f2bd0)

The following handshake mechanism needs be followed after firmware download is completed to bring the firmware to running state. After firmware fragments of Operational image are downloaded and secure sends result of the image succeeds, 1. Driver sends HCI Intel reset with boot option #1 to switch FW image. 2. FW sends Alive GP[0] MSIx 3. Driver enables data path (doorbell 0x460 for RBDs, etc...) 4. Driver gets Bootup event from firmware 5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0) 6. FW sends Alive GP[0] MSIx 7. Device host interface is fully set for BT protocol stack operation. 8. Driver may optionally get debug event with ID 0x97 which can be dropped For Intermediate loadger image, all the above steps are applicable expcept #5 and #6. On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait for it before passing control over to bluetooth stack. Co-developed-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> (cherry picked from commit 05c200c8f0295c9c91beeb3ee0552331c1f8adbe)

@strlen

[ Upstream commit 146b6f1112eb30a19776d6c323c994e9d67790db ] Under certain kernel configurations when building with Clang/LLVM, the compiler does not generate a return or jump as the terminator instruction for ip_vs_protocol_init(), triggering the following objtool warning during build time: vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6() At runtime, this either causes an oops when trying to load the ipvs module or a boot-time panic if ipvs is built-in. This same issue has been reported by the Intel kernel test robot previously. Digging deeper into both LLVM and the kernel code reveals this to be a undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer of 64 chars to store the registered protocol names and leaves it uninitialized after definition. The function calls strnlen() when concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE strnlen() performs an extra step to check whether the last byte of the input char buffer is a null character (commit 3009f89 ("fortify: Allow strlen() and strnlen() to pass compile-time known lengths")). This, together with possibly other configurations, cause the following IR to be generated: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr deepin-community#5 section ".init.text" align 16 !kcfi_type !29 { %1 = alloca [64 x i8], align 16 ... 14: ; preds = %11 %15 = getelementptr inbounds i8, ptr %1, i64 63 %16 = load i8, ptr %15, align 1 %17 = tail call i1 @llvm.is.constant.i8(i8 %16) %18 = icmp eq i8 %16, 0 %19 = select i1 %17, i1 %18, i1 false br i1 %19, label %20, label %23 20: ; preds = %14 %21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) deepin-community#23 ... 23: ; preds = %14, %11, %20 %24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) deepin-community#24 ... } The above code calculates the address of the last char in the buffer (value %15) and then loads from it (value %16). Because the buffer is never initialized, the LLVM GVN pass marks value %16 as undefined: %13 = getelementptr inbounds i8, ptr %1, i64 63 br i1 undef, label %14, label %17 This gives later passes (SCCP, in particular) more DCE opportunities by propagating the undef value further, and eventually removes everything after the load on the uninitialized stack location: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 { %1 = alloca [64 x i8], align 16 ... 12: ; preds = %11 %13 = getelementptr inbounds i8, ptr %1, i64 63 unreachable } In this way, the generated native code will just fall through to the next function, as LLVM does not generate any code for the unreachable IR instruction and leaves the function without a terminator. Zero the on-stack buffer to avoid this possible UB. Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402100205.PWXIz1ZK-lkp@intel.com/ Co-developed-by: Ruowen Qin <ruqin@redhat.com> Signed-off-by: Ruowen Qin <ruqin@redhat.com> Signed-off-by: Jinghao Jia <jinghao7@illinois.edu> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

@strlen

[ Upstream commit 146b6f1112eb30a19776d6c323c994e9d67790db ] Under certain kernel configurations when building with Clang/LLVM, the compiler does not generate a return or jump as the terminator instruction for ip_vs_protocol_init(), triggering the following objtool warning during build time: vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6() At runtime, this either causes an oops when trying to load the ipvs module or a boot-time panic if ipvs is built-in. This same issue has been reported by the Intel kernel test robot previously. Digging deeper into both LLVM and the kernel code reveals this to be a undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer of 64 chars to store the registered protocol names and leaves it uninitialized after definition. The function calls strnlen() when concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE strnlen() performs an extra step to check whether the last byte of the input char buffer is a null character (commit 3009f89 ("fortify: Allow strlen() and strnlen() to pass compile-time known lengths")). This, together with possibly other configurations, cause the following IR to be generated: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #5 section ".init.text" align 16 !kcfi_type !29 { %1 = alloca [64 x i8], align 16 ... 14: ; preds = %11 %15 = getelementptr inbounds i8, ptr %1, i64 63 %16 = load i8, ptr %15, align 1 %17 = tail call i1 @llvm.is.constant.i8(i8 %16) %18 = icmp eq i8 %16, 0 %19 = select i1 %17, i1 %18, i1 false br i1 %19, label %20, label %23 20: ; preds = %14 %21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) #23 ... 23: ; preds = %14, %11, %20 %24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) #24 ... } The above code calculates the address of the last char in the buffer (value %15) and then loads from it (value %16). Because the buffer is never initialized, the LLVM GVN pass marks value %16 as undefined: %13 = getelementptr inbounds i8, ptr %1, i64 63 br i1 undef, label %14, label %17 This gives later passes (SCCP, in particular) more DCE opportunities by propagating the undef value further, and eventually removes everything after the load on the uninitialized stack location: define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 { %1 = alloca [64 x i8], align 16 ... 12: ; preds = %11 %13 = getelementptr inbounds i8, ptr %1, i64 63 unreachable } In this way, the generated native code will just fall through to the next function, as LLVM does not generate any code for the unreachable IR instruction and leaves the function without a terminator. Zero the on-stack buffer to avoid this possible UB. Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402100205.PWXIz1ZK-lkp@intel.com/ Co-developed-by: Ruowen Qin <ruqin@redhat.com> Signed-off-by: Ruowen Qin <ruqin@redhat.com> Signed-off-by: Jinghao Jia <jinghao7@illinois.edu> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

README: add the deep-kernel information to the README

d1e52dd

Signed-off-by: huangbibo <huangbibo@uniontech.com> Change-Id: I71a252108c26840205576414db19a6c4c9e1b7f1

zccrs approved these changes Oct 21, 2022

View reviewed changes

zccrs merged commit 19a1571 into deepin-community:UOS-K5.10-LTS Oct 21, 2022

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README: add the deep-kernel information to the README #5

README: add the deep-kernel information to the README #5

huangbibo commented Oct 21, 2022

README: add the deep-kernel information to the README #5

README: add the deep-kernel information to the README #5

Conversation

huangbibo commented Oct 21, 2022