Output reloading flaky test: Log when test fails

libbeat/publisher/pipeline/controller.go

@@ -21,6 +21,7 @@ import (
 	"github.com/elastic/beats/v7/libbeat/beat"
 	"github.com/elastic/beats/v7/libbeat/common"
 	"github.com/elastic/beats/v7/libbeat/common/reload"
+	"github.com/elastic/beats/v7/libbeat/logp"
 	"github.com/elastic/beats/v7/libbeat/outputs"
 	"github.com/elastic/beats/v7/libbeat/publisher"
 	"github.com/elastic/beats/v7/libbeat/publisher/queue"
@@ -105,7 +106,8 @@ func (c *outputController) Set(outGrp outputs.Group) {
 	clients := outGrp.Clients
 	worker := make([]outputWorker, len(clients))
 	for i, client := range clients {
-		worker[i] = makeClientWorker(c.observer, c.workQueue, client, c.monitors.Tracer)
+		logger := logp.NewLogger("publisher_pipeline_output")
+		worker[i] = makeClientWorker(c.observer, c.workQueue, client, logger, c.monitors.Tracer)
 	}
 	grp := &outputGroup{
 		workQueue:  c.workQueue,

libbeat/publisher/pipeline/logger.go

@@ -0,0 +1,29 @@
+// Licensed to Elasticsearch B.V. under one or more contributor
+// license agreements. See the NOTICE file distributed with
+// this work for additional information regarding copyright
+// ownership. Elasticsearch B.V. licenses this file to you under
+// the Apache License, Version 2.0 (the "License"); you may
+// not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+
+package pipeline
+
+type logger interface {
+	Debug(vs ...interface{})
+	Debugf(fmt string, vs ...interface{})
+
+	Info(vs ...interface{})
+	Infof(fmt string, vs ...interface{})
+
+	Error(vs ...interface{})
+	Errorf(fmt string, vs ...interface{})
+}

libbeat/publisher/pipeline/output.go

@@ -25,7 +25,6 @@ import (
 
 	"go.elastic.co/apm"
 
-	"github.com/elastic/beats/v7/libbeat/logp"
 	"github.com/elastic/beats/v7/libbeat/outputs"
 )
 
@@ -49,12 +48,12 @@ type netClientWorker struct {
 
 	batchSize  int
 	batchSizer func() int
-	logger     *logp.Logger
+	logger     logger
 
 	tracer *apm.Tracer
 }
 
-func makeClientWorker(observer outputObserver, qu workQueue, client outputs.Client, tracer *apm.Tracer) outputWorker {
+func makeClientWorker(observer outputObserver, qu workQueue, client outputs.Client, logger logger, tracer *apm.Tracer) outputWorker {
 	w := worker{
 		observer: observer,
 		qu:       qu,
@@ -70,7 +69,7 @@ func makeClientWorker(observer outputObserver, qu workQueue, client outputs.Clie
 		c = &netClientWorker{
 			worker: w,
 			client: nc,
-			logger: logp.NewLogger("publisher_pipeline_output"),
+			logger: logger,
 			tracer: tracer,
 		}
 	} else {

libbeat/publisher/pipeline/output_test.go

@@ -18,7 +18,9 @@
 package pipeline
 
 import (
+	"fmt"
 	"math"
+	"strings"
 	"sync"
 	"testing"
 	"testing/quick"
@@ -30,7 +32,6 @@ import (
 
 	"github.com/elastic/beats/v7/libbeat/common/atomic"
 	"github.com/elastic/beats/v7/libbeat/internal/testutil"
-	"github.com/elastic/beats/v7/libbeat/logp"
 	"github.com/elastic/beats/v7/libbeat/outputs"
 	"github.com/elastic/beats/v7/libbeat/publisher"
 )
@@ -49,8 +50,10 @@ func TestMakeClientWorker(t *testing.T) {
 				numBatches := 300 + (i % 100) // between 300 and 399
 				numEvents := atomic.MakeUint(0)
 
+				logger := makeBufLogger(t)
+
 				wqu := makeWorkQueue()
-				retryer := newRetryer(logp.NewLogger("test"), nilObserver, wqu, nil)
+				retryer := newRetryer(logger, nilObserver, wqu, nil)
 				defer retryer.close()
 
 				var published atomic.Uint
@@ -61,7 +64,7 @@ func TestMakeClientWorker(t *testing.T) {
 
 				client := ctor(publishFn)
 
-				worker := makeClientWorker(nilObserver, wqu, client, nil)
+				worker := makeClientWorker(nilObserver, wqu, client, logger, nil)
 				defer worker.Close()
 
 				for i := uint(0); i < numBatches; i++ {
@@ -74,9 +77,14 @@ func TestMakeClientWorker(t *testing.T) {
 				timeout := 20 * time.Second
 
 				// Make sure that all events have eventually been published
-				return waitUntilTrue(timeout, func() bool {
+				success := waitUntilTrue(timeout, func() bool {
 					return numEvents == published
 				})
+				if !success {
+					logger.Flush()
+					t.Logf("numBatches = %v, numEvents = %v, published = %v", numBatches, numEvents, published)
+				}
+				return success
 			}, nil)
 
 			if err != nil {
@@ -102,8 +110,10 @@ func TestReplaceClientWorker(t *testing.T) {
 			err := quick.Check(func(i uint) bool {
 				numBatches := 1000 + (i % 100) // between 1000 and 1099
 
+				logger := makeBufLogger(t)
+
 				wqu := makeWorkQueue()
-				retryer := newRetryer(logp.NewLogger("test"), nilObserver, wqu, nil)
+				retryer := newRetryer(logger, nilObserver, wqu, nil)
 				defer retryer.close()
 
 				var batches []publisher.Batch
@@ -140,7 +150,7 @@ func TestReplaceClientWorker(t *testing.T) {
 				}
 
 				client := ctor(blockingPublishFn)
-				worker := makeClientWorker(nilObserver, wqu, client, nil)
+				worker := makeClientWorker(nilObserver, wqu, client, logger, nil)
 
 				// Allow the worker to make *some* progress before we close it
 				timeout := 10 * time.Second
@@ -165,14 +175,20 @@ func TestReplaceClientWorker(t *testing.T) {
 				}
 
 				client = ctor(countingPublishFn)
-				makeClientWorker(nilObserver, wqu, client, nil)
+				makeClientWorker(nilObserver, wqu, client, logger, nil)
 				wg.Wait()
 
 				// Make sure that all events have eventually been published
 				timeout = 20 * time.Second
-				return waitUntilTrue(timeout, func() bool {
+				success := waitUntilTrue(timeout, func() bool {
 					return numEvents == int(publishedFirst.Load()+publishedLater.Load())
 				})
+				if !success {
+					logger.Flush()
+					t.Logf("numBatches = %v, numEvents = %v, publishedFirst = %v, publishedLater = %v",
+						numBatches, numEvents, publishedFirst.Load(), publishedLater.Load())
+				}
+				return success
 			}, &quick.Config{MaxCount: 25})
 
 			if err != nil {
@@ -188,8 +204,10 @@ func TestMakeClientTracer(t *testing.T) {
 	numBatches := 10
 	numEvents := atomic.MakeUint(0)
 
+	logger := makeBufLogger(t)
+
 	wqu := makeWorkQueue()
-	retryer := newRetryer(logp.NewLogger("test"), nilObserver, wqu, nil)
+	retryer := newRetryer(logger, nilObserver, wqu, nil)
 	defer retryer.close()
 
 	var published atomic.Uint
@@ -203,7 +221,7 @@ func TestMakeClientTracer(t *testing.T) {
 	recorder := apmtest.NewRecordingTracer()
 	defer recorder.Close()
 
-	worker := makeClientWorker(nilObserver, wqu, client, recorder.Tracer)
+	worker := makeClientWorker(nilObserver, wqu, client, logger, recorder.Tracer)
 	defer worker.Close()
 
 	for i := 0; i < numBatches; i++ {
@@ -227,6 +245,56 @@ func TestMakeClientTracer(t *testing.T) {
 	apmEvents := recorder.Payloads()
 	transactions := apmEvents.Transactions
 	if len(transactions) != numBatches {
+		logger.Flush()
 		t.Errorf("expected %d traces, got %d", numBatches, len(transactions))
 	}
 }
+
+// bufLogger is a buffered logger. It does not immediately print out log lines; instead it
+// buffers them. To print them out, one must explicitly call it's Flush() method. This is
+// useful when you want to see the logs only when tests fail but not when they pass.
+type bufLogger struct {
+	t     *testing.T
+	lines []string
+	mu    sync.RWMutex
+}
+
+func (l *bufLogger) Debug(vs ...interface{})              { l.report("DEBUG", vs) }
+func (l *bufLogger) Debugf(fmt string, vs ...interface{}) { l.reportf("DEBUG ", fmt, vs) }
+
+func (l *bufLogger) Info(vs ...interface{})              { l.report("INFO", vs) }
+func (l *bufLogger) Infof(fmt string, vs ...interface{}) { l.reportf("INFO", fmt, vs) }
+
+func (l *bufLogger) Error(vs ...interface{})              { l.report("ERROR", vs) }
+func (l *bufLogger) Errorf(fmt string, vs ...interface{}) { l.reportf("ERROR", fmt, vs) }
+
+func (l *bufLogger) report(level string, vs []interface{}) {
+	str := strings.TrimRight(strings.Repeat("%v ", len(vs)), " ")
+	l.reportf(level, str, vs)
+}
+func (l *bufLogger) reportf(level, str string, vs []interface{}) {
+	str = level + ": " + str
+	line := fmt.Sprintf(str, vs...)
+
+	l.mu.Lock()
+	defer l.mu.Unlock()
+	l.lines = append(l.lines, line)
+}
+
+func (l *bufLogger) Flush() {
+	l.mu.Lock()
+	defer l.mu.Unlock()
+
+	for _, line := range l.lines {
+		l.t.Log(line)
+	}
+
+	l.lines = make([]string, 0)
+}
+
+func makeBufLogger(t *testing.T) *bufLogger {
+	return &bufLogger{
+		t:     t,
+		lines: make([]string, 0),
+	}
+}

libbeat/publisher/pipeline/retry.go

@@ -19,8 +19,6 @@ package pipeline
 
 import (
 	"sync"
-
-	"github.com/elastic/beats/v7/libbeat/logp"
 )
 
 // retryer is responsible for accepting and managing failed send attempts. It
@@ -31,7 +29,7 @@ import (
 // will the consumer be paused, until some batches have been processed by some
 // outputs.
 type retryer struct {
-	logger   *logp.Logger
+	logger   logger
 	observer outputObserver
 
 	done chan struct{}
@@ -77,7 +75,7 @@ const (
 )
 
 func newRetryer(
-	log *logp.Logger,
+	log logger,
 	observer outputObserver,
 	out workQueue,
 	c interruptor,