This repository has been archived by the owner on Mar 1, 2023. It is now read-only.
Merge latest changes from Azure - 2019-08-06 #26
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
ARM Architecture support in SONIC make configure platform=[ASIC_VENDOR_ARCH] PLATFORM_ARCH=[ARM_ARCH] SONIC_ARCH: default amd64 armhf - arm32bit arm64 - arm64bit Signed-off-by: Antony Rheneus <arheneus@marvell.com>
Generate sonic slave Dockerfile based on j2 template Signed-off-by: Guohan Lu <gulv@microsoft.com>
* [bgp]: Implement Universal Traffic Shift for SONiC * Fix issue with ipv6 loopback match * Add tests
Remove the downloaded tar ball after installation Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
Change 'source_ip' to 'src_ip'
* [Mellanox]refractor the sfp event change notification logic for new platform api remove the standalong daemon which is in charge of polling sfp change event through sdk interface and move the polling stuff to the event in the chassis daemon. * rephase some comment * fix typo in sfp_event.sfp_event.initialize
Signed-off-by: Guohan Lu <gulv@microsoft.com>
) - What I did Move the enabling of Systemd services from sonic_debian_extension to a new systemd generator - How I did it Create a new systemd generator to manually create symlinks to enable systemd services Add rules/Makefile to build generator Add services to be enabled to /etc/sonic/generated_services.conf to be read by the generator at boot time Signed-off-by: Lawrence Lee <t-lale@microsoft.com>
…net#3226) Signed-off-by: Guohan Lu <gulv@microsoft.com>
…c-net#3201) * Added > /64 ip6 route support for 1024 entries. * Added t0 buffer_default file * Seperated buffer config as seperate PR Signed-off-by: Ashok Daparthi <Ashok_Daparthi@Dell.com> * Corrected Wrong dport map and renamed config files
…-net#3221) * [platform/hwsku] Added Marvell Armhf 32 bit ET6448M 52x Board 48x1G and 4x10G Management switch Signed-off-by: Antony Rheneus <arheneus@marvell.com>
Signed-off-by: Myron Sosyak <msosyak@barefootnetworks.com>
…t#3233) Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>
…de ptf (sonic-net#3239) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
* src/sonic-utilities ee56d54...cb0e745 (11): > sonic_utilities: Support for DOM Threshold values for EEPROM dump (sonic-net#545) > [portstat] Fix portstat show RX_UTIL over 100% for 100G (sonic-net#563) > sonic_installer: fix read-only filesystem support for firmware update (sonic-net#565) > Revert "show acl table command output should show binding column correctly even with single port (sonic-net#447)" (sonic-net#589) > show acl table command output should show binding column correctly even with single port (sonic-net#447) > [config] Do no stop or restart dependent services (sonic-net#582) > sfpshow: prevent 'show int trans eeprom --dom' from crashing (sonic-net#567) > [warm-reboot] add docker upgrade --warm option and roll back support (sonic-net#559) > [ecnconfig] Validate input WRED parameters (sonic-net#579) > [sonic-utilities] Add fstrim to reboot (sonic-net#535) > Fixing the expected neighbor command due to change in output format under sonic-buildimage/pull/3036 (sonic-net#584)
I2c burst read may failed due to misoperation of ir3570a(A DC-to-DC converter IC). As sonic-net#2966, there are 3 more models have this symptom, as7326-56x, as7726-32x, and as9716-32d. Also correct typo of naming on as7816-64x and as7716-32x. Signed-off-by: roy_lee roy_lee@accton.com What I did Disabling i2c function of ir3570a which may failed i2c tranfer to others. Close channel of mux after data transfered. How I did it Identify version of ir3570, if it's ir3570a, disable its alias i2c address. Enable parameter of driver i2c_mux_pca954x to close channel on after every access. How to verify it Write 08 to offset 0xcf of systom eeprom and execute i2c block read. It will return error. plug-in several transceivers and run "show interfaces transceiver presence" and "sfputil show presence". You may see the different result. (But doing this requires updated xcvrd). Signed-off-by: roy_lee <roy_lee@accton.com>
Fix for rules/config as it is overridden by Make infra Signed-off-by: Antony Rheneus <arheneus@marvell.com>
…nslaved (sonic-net#3250) The race condition could happen like this: When an interface is enslaved into the port channel immediately after it is created, the order of creating the ifinfo and linking the ifinfo to the port is not guaranteed. Please check the patch commit message to get full details. Signed-off-by: Shu0T1an ChenG <shuche@microsoft.com>
Submodule src/sonic-linux-kernel 415b368..1d9c69f: > [kernel source] download kernel source files from azure storage (sonic-net#95) > Fix false alarm when writing convrate on max6658 (sonic-net#82) Signed-off-by: Ying Xie <ying.xie@microsoft.com>
xcvrd is broken because a newly introduced interface get_transceiver_dom_threshold_info_dict in common code calls a unsupported interface _read_eeprom_specific_bytes. Fix the issue by implement get_transceiver_dom_threshold_info_dict to avoid calling the unsupported interface.
New SAI has fix for 50G FEC issue Signed-off-by: Andriy Moroz <c_andriym@mellanox.com>
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* [mellanox]: Added SN3800 platform. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
Bug is introduced in sonic-net#2980. Mellanox does not support setting MAC on switch create.
Add platform support for delta ag9032v2a CPU: Broadwell-DE ASIC: BMC56870 with <100Gx32 + 10Gx1> BMC: AST2520: - What I did add the new platform of delta ag9032v2a - How I did it 1.provide the QSFP and SWPLD attributes and create the virtual buses of I2C 2. provide the port configuration - How to verify it 1. psuutil.py 2. sfputil.py 3. bcmcd - Known issue The port LED is not ready. We noticed that BCM chip had the M0 FW initialization issue while bringing up SDK with "BRCM SAI ver: [3.5.2.3], OCP SAI ver: [1.4], SDK ver: [6.5.14]" and here is the information : root@sonic:/home/admin# bcmcmd "M0 status" M0 status 0:soc_iproc_data_send_wait: No response for msg 2 M0 FW is NOT Running M0 FW Version is 0.0 Host FW Version is 1.0 Host and M0 FW Versions do not match!!! Signed-off-by: hans-tseng <hans.tseng@deltaww.com>
…#3182) * [Quanta] Add a new supported device and platform, IX8C-56X Switch Vendor: Quanta Switch SKU: IX8C-56X ASIC Vendor: Broadcom Switch ASIC: Trident3 Port Configuration: 48x25G + 8x100G Signed-off-by: Jonathan Tsai <jonathan.tsai@quantatw.com>
Signed-off-by: Antony Rheneus <arheneus@marvell.com>
…esults from referencing an already destroyed global variable when destructuring daemon_base.Logger by introducing a class member to represent the global (sonic-net#3281)
…nic-net#3287) crashes. Raised go lang support https://groups.google.com/forum/?utm_medium=email&utm_source=footer#!topic/golang-nuts/1txPOGa4aGc Also raised qemu bug for support as golang rejected it. https://bugs.launchpad.net/qemu/+bug/1838946 In parallel, debugging issue to resolve it Signed-off-by: Antony Rheneus <arheneus@marvell.com>
* Adding --key option to sonic-cfggen script. This will help to display config DB with more granularity. Signed-off-by: Vasant Patil <vapatil@linkedin.com>
# Conflicts: # build_debian.sh # device/dell/x86_64-dellemc_s5232f_c3538-r0/DellEMC-S5232f-P-10G/td3-s5232f-8x100G-96x10G.config.bcm # device/dell/x86_64-dellemc_s5232f_c3538-r0/DellEMC-S5232f-P-10G/td3-s5232f-96x10G+8x100G.config.bcm # device/dell/x86_64-dellemc_s5232f_c3538-r0/DellEMC-S5232f-P-10G/td3-s5232f-96x10G-8x100G.config.bcm # device/dell/x86_64-dellemc_s5232f_c3538-r0/DellEMC-S5232f-P-25G/td3-s5232f-8x100G-96x25G.config.bcm # device/dell/x86_64-dellemc_s5232f_c3538-r0/DellEMC-S5232f-P-25G/td3-s5232f-96x25G+8x100G.config.bcm # device/dell/x86_64-dellemc_s5232f_c3538-r0/DellEMC-S5232f-P-25G/td3-s5232f-96x25G-8x100G.config.bcm # src/sonic-utilities
seiferteric
pushed a commit
that referenced
this pull request
Oct 14, 2019
* Update src/sonic-platform-daemons from branch 'broadcom_sonic'
to e17c958dcbef7336697e24a40a49f3e06b9b996d
- Merge 201904 branch to broadcom_sonic branch on Mon Jul 1 13:57:55 PDT 2019
Change-Id: I839d6028d8f05dcf48df2b7af15c8f6edfc11c64
- Dynamic transceiver tuning support (#26)
- Add .gitignore file (#27)
seiferteric
pushed a commit
that referenced
this pull request
Nov 25, 2019
* Update src/sonic-telemetry from branch 'broadcom_sonic'
to 31c54a162e0707830cefcad5cf99451c293095f4
- [JIRA SONIC-10470]merge sonic-telemetry dell_sonic --> broadcom_sonic 11112019
Change-Id: I2ae9fe6f9a60937ad178c3a930308ea046cad51e
- Merge pull request sonic-net#43 from project-arlo/gnoi_ConfigManagement
Add config mgmt gNOI RPCs, rename sonic gNOI proto file
- Merge pull request sonic-net#42 from project-arlo/gnoi_techsupport
Gnoi techsupport
- Add config mgmt gNOI RPCs, rename sonic gNOI proto file
- Merge remote-tracking branch 'github/master' into gnoi_techsupport
- Merge pull request sonic-net#41 from project-arlo/gnmi_set_prefix
Add prefix support to gnmi_set
- Merge pull request sonic-net#40 from project-arlo/updates_only
Updates only
- Merge pull request sonic-net#39 from project-arlo/username_password_support
Username password support
- Make same changes for show-techsupport proto
- Add sonic-tests:sum rpc for example
- wip
- Initial support for showTechSupport rpc
- Add prefix support to gnmi_set
- Finish updates_only for poll and once
- Move line inside block
- Implement updates_only for stream subscriptions
- Add authentication to gNOI. Return gRPC erros from PAMAuthenAndAuthor for better error codes
- verify username/password is actually sent
- Remove file added by accident
- Add cmd line arg to enable user/passwd auth
- Initial username/password auth support
- Merge pull request #36 from project-arlo/gNOI
Initial gNOI Support
- Merge pull request #37 from project-arlo/jsonSchemaTests
Json schema tests
- remove debug code
- Fix bug with muliple operations reusing path var
- Add target option to gNOI client
- Get schema for tests from compiled output
- Add flag module to gNOI client to support morre rpcs in the future
- Remove commented out code
- Initial checkin for gNOI, with example System Time rpc
- Merge pull request #34 from project-arlo/jsonSchemaTests
Json schema tests
- Merge pull request #35 from project-arlo/brcm_poc
Brcm poc
- Merge remote-tracking branch 'broadcom/broadcom_sonic' into brcm_poc
- Add cleanup to test cases
- Migrate interface ipv4 test to new format
- Fix Makefile schema path, ad models, change test format
- Fix formatting of json in README
- Merge pull request #33 from project-arlo/master
Syncing project-arlo/sonic-telmetry master to brcm_poc
- typo
- Add readme for json schema tests
- More changes for Json Schema based tests
- Use json schema for get tests as well. Use get test in set to verify results
- Go back to local gNMI server
- Initial validation support using json schema
- Load tests from files and get info from file name
- Merge pull request #30 from project-arlo/fix-check-testcase
Fix check testcase to check individual attributes in a platform-independent way.
- Merge pull request #31 from project-arlo/gnmi_cli_fixes
Add check that heartbeat_interval is only valid on streaming query type
- Merge remote-tracking branch 'project-arlo-telemetry/brcm_poc' into broadcom_sonic
Change-Id: Ia772a55a893c2bee3c9e974700e4821f2f8d7af6
- Add check that heartbeat_interval is only valid on streaming query type
- Merge branch 'master' of https://github.com/project-arlo/sonic-telemetry into fix-check-testcase
Signed-off-by: Tejaswi Goel <Tejaswi_Goel@Dell.com>
- Merge pull request #29 from project-arlo/master
Dell fixes on telemetry repo - 13th Sep
- Merge pull request #28 from project-arlo/tests
Disable platform specific test for now
- Disable platform specific test for now
- Merge pull request #27 from project-arlo/update_tls_config
Remove duplicate ciphers
- Remove duplicate ciphers
- fix the check if value set testcase
Signed-off-by: Tejaswi Goel <Tejaswi_Goel@Dell.com>
- Merge pull request #26 from project-arlo/update_tls_config
Update tls config
- Update cipher suite list again
- Fix spaces to tabs
- Set Min TLS Version and cipher suites
- Merge remote-tracking branch 'project-arlo-telemetry/brcm_poc' into broadcom_sonic
Change-Id: Iae02e417fe8c8ea378a0e85d2354cda10f833b1b
- Merge pull request #25 from project-arlo/master
merge gnmi_cli code into telemetry repo
- Merge pull request #23 from project-arlo/gnmi_cli_fixes
Gnmi cli fixes
- Merge pull request #24 from project-arlo/brcm_poc
Fix low code coverage issue by enabling the gnmi_server test code listening on port 8081
- Fix streaming_type in tests
- Merge remote-tracking branch 'project-arlo-telemetry/brcm_poc' into broadcom_sonic
Change-Id: I14fb29ab4016f390fab9c930a0af69f9a20eba85
- Merge remote-tracking branch 'sshorigin/master' into gnmi_cli_fixes
- Add full code for gnmi_cli with our changes so it can be built from scratch like gnmi_set/get. Update Makefile. Add fixes to gnmi_cli to use seconds as units everywhere instead of nanoseconds, and accept string for -streaming_type
- Merge pull request #22 from project-arlo/brcm_poc
BRCM changes for Telemetry UT
- Merge remote-tracking branch 'project-arlo-telemetry/brcm_poc' into broadcom_sonic
Change-Id: I4a0804425a4e0a396870004d717f192354dd19c8
- Merge remote-tracking branch 'project-arlo-telemetry/brcm_poc' into broadcom_sonic
Change-Id: Id9f1bef203c4a017d53ce0a854072732656e69ee
- Merge remote-tracking branch 'project-arlo-telemetry/brcm_poc' into broadcom_sonic
Change-Id: Id9f1bef203c4a017d53ce0a854072732656e69ee
- Merge pull request #21 from project-arlo/master
bring brcm_poc in par with master
- Merge pull request #20 from project-arlo/gnmi-test-after-set
Add code to check values set
- Add code to check values set
Signed-off-by: Tejaswi Goel <Tejaswi_Goel@Dell.com>
- Merge pull request #19 from project-arlo/gnmi-add-delete-test
Minor fix in Delete OC Interface IP testcase
- Minor fix in Delete OC Interface IP testcase
Signed-off-by: Tejaswi Goel <Tejaswi_Goel@Dell.com>
- Merge pull request #18 from project-arlo/gnmi-add-delete-test
Add delete test case
- Add delete testcase
Signed-off-by: Tejaswi Goel <Tejaswi_Goel@Dell.com>
- Merge pull request #17 from project-arlo/gnmi_test_sys_pfm
Gnmi Server test for system platform and interfaces
- Add json file for ip config
Signed-off-by: Tejaswi Goel <Tejaswi_Goel@Dell.com>
- Working gnmi server test for sys,pfm,interfaces
- Add test to set ip address
Signed-off-by: Tejaswi Goel <Tejaswi_Goel@Dell.com>
- Code cleanup in server_test.go
Signed-off-by: Tejaswi Goel <Tejaswi_Goel@Dell.com>
- Fix paths
- fix
- Fix some issues with test infra
- Changes for testing get/set operations on OC interfaces
Signed-off-by: Tejaswi Goel <Tejaswi_Goel@Dell.com>
- working gnmi sys and pfm test without clearing bad logs
- Merge pull request #16 from project-arlo/tests
Disable old tests that fail due to new fields being added. Add basic …
- Disable old tests that fail due to new fields being added. Add basic interface get test and capabilities test. Change package name and add symlink to cvl schema
- Merge pull request #15 from project-arlo/tests
Add test directory
- Add test directory
- Merge pull request #14 from project-arlo/translib-stream-subscribe
Implement updates_only for ON_CHANGE streaming mode
- Implement updates_only for ON_CHANGE streaming mode
- Merge pull request #13 from project-arlo/translib-stream-subscribe
Check error response before adding to on_change list
- Check error response before adding to on_change list
- Merge pull request #12 from project-arlo/capabilities-models
Return models based on translib GetModels API
- Return models based on translib GetModels API
- Merge pull request #11 from project-arlo/translib-stream-subscribe
Translib stream subscribe
- Fix bug with sync messages
- Implement suppress_redundant, fix ticker_map format, remove some debug prints, fix heartbeats
- Close channel on error, check if timer if HB
- Update IsSupported to IsOnChangeSupported, add heartbeat_interval support to gnmi_cli, remove debug code
- Fix issue with when sync message is sent. Add heartbeat support. Add valueCache for suppress_redundant (wip)
- convert subscribeResponse to gnmi subscribeResponse and return
- wip
- Merge pull request #10 from project-arlo/fix-if-replace-update
Fix issue with updates and replace with interfaces
- Fix issue with updates and replace with interfaces
- Merge pull request #9 from project-arlo/sample-subscribe
Sample subscribe
- Fixes, also include binary for gnmi_cli for now
- Add some dummy code for future subscribe api
- cleanup
- Use ticker_info struct
- cleanup
- Add paths to existing timer group if interval is the same
- Initial support for sample based streaming subscribe
- Merge pull request #8 from project-arlo/subscribe-support
Ad once channel cleanup
- Ad once channel cleanup
- Merge pull request #7 from project-arlo/subscribe-support
Subscribe support
- Add gnmi_cli for subscribe client, update Makefile to build it, add .gitignore
- Implement ONCE subscribe mode for translib
- Port polling subscriptions code for translib
- Merge pull request #6 from project-arlo/buildimage-refactor
Fix build issue
- Fix build issue
- Merge pull request #5 from project-arlo/buildimage-refactor
trigger building ocbinds file in translib, add gnmi_clients
- trigger building ocbinds file in translib, forgot to add gnmi_clients in last commit
- Merge pull request #4 from project-arlo/buildimage-refactor
Add gnmi set and get client to build
- Add gnmi set and get client to build
- Merge pull request #3 from project-arlo/buildimage-refactor
Add back install and other targets to fix deb package
- Add back install and other targets to fix deb package
- Merge pull request #2 from project-arlo/buildimage-refactor
Buildimage refactor
- Install CVL deps and update gopath
- More Makefile changes
- Move source files into src, change import paths, fixing Makefile
- Merge pull request #1 from project-arlo/brcm_poc
Merge PoC changes to master
- Ignore test results for gnmi_server
The Debian files attempt to run make check for the gNMI server, however,
it fails on a build machine, because it expects the Redis server to be
available and listening on localhost port 6379.
For now, the result of the test is ignored, and we have to find a way to
fix this so that the tests work even on a build machine.
- GNMI PoC changes
seiferteric
pushed a commit
that referenced
this pull request
Jan 14, 2021
This update brings in the following commits. 86c1108 Enable arm architecture to build in addition to amd64 (#37) 4acb2c3 fix bugs and enhance Transformer (#35) 49e5a22 ygot related enhancements and fixes (#34) 51224de Fix ietf yang search path for cvl schema builds (#32) 3c6cdb3 CVL Changes #8: 'must' and 'when' expression evaluation (#31) dabf231 CVL Changes #7: 'leafref' evaluation (#28) 6f9535f CVL Changes #6: Customized Xpath Engine integration (#27) 5e2466b DB-Layer fixes/enhancements (#26) 9a27302 CVL Changes #4: Implementation of new CVL APIs (#22) dbf1093 Translib support for authorization, yang versioning and Delete flag (#21) 80f369e CVL Changes #5: YParser enhancement (#23) 904ce18 CVL Changes #3: Multi-db instance support (#20) 9d24a34 CVL Changes #2: YValidator infra changes for evaluating xpath expression (#19) f3fc40f CVL Changes #1: Initial CVL code reorganization and common infra changes (#18) 4922601 Bulk and RPC API support in translib (#16) 1d730df RFC7895 yang module library implementation (#15)
seiferteric
pushed a commit
that referenced
this pull request
Jan 24, 2022
Advance submodule update with the following changes: 4475750 Config reload fix (#29) cf60d5e [ci]: add proper azp (#26) f0fbfe7 [CI] Set up CI with Azure Pipelines (#25) 879d7bd Include port default fec configuration to be included in ZTP configuration (#24) a6ae955 Add a pre-defined plugin to download a list of files (#23) 6f0305b [MultiDB] Add multidb support to sonic-ztp (#16)
Sign up for free
to subscribe to this conversation on GitHub.
Already have an account?
Sign in.
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.