Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Deprecate --global-option and --build-option #11859

Open
sbidoul opened this issue Mar 12, 2023 · 23 comments · May be fixed by #12301
Open

Deprecate --global-option and --build-option #11859

sbidoul opened this issue Mar 12, 2023 · 23 comments · May be fixed by #12301
Assignees
Labels
project: setuptools Related to setuptools type: deprecation Related to deprecation / removal.
Milestone

Comments

@sbidoul
Copy link
Member

sbidoul commented Mar 12, 2023

The use of --global-option and --build-option currently trigger a warning, recommending --config-settings.

I propose to deprecate them with a 6 month notice and remove them in 23.3.

After that, we can consider dropping the legacy setup.py egg_info + setup.py bdist_wheel code paths and switch to using the default build backend without build isolation for projects without pyproject.toml.

@sbidoul sbidoul added project: setuptools Related to setuptools type: deprecation Related to deprecation / removal. labels Mar 12, 2023
@sbidoul sbidoul added this to the 23.1 milestone Mar 12, 2023
@sbidoul sbidoul self-assigned this Mar 12, 2023
@pradyunsg
Copy link
Member

pradyunsg commented Mar 12, 2023

Alternatively, we could forward those options to backends on a pyproject.toml based build, via config settings?

@uranusjr
Copy link
Member

Realistically the option translation is only useful for projects using setuptools, so we should first ask whether setuptools devs are interested in establishing such translation.

@sbidoul
Copy link
Member Author

sbidoul commented Mar 13, 2023

Alternatively, we could forward those options to backends on a pyproject.toml based build, via config settings?

I guess it's possible in principle, although I can imagine some difficulties (e.g. does setuptools distinguish global and build options in config settings?).

This would also likely trigger requests for adding --build-option to pip install, since it's currently in pip wheel only.

So, all in all, I think it would be quite a bit of fuss for little benefits. Especially since we'll likely want to drop these setuptools specific options at some point in any case.

@pradyunsg
Copy link
Member

pradyunsg commented Mar 13, 2023

These are both referenced in the setuptools implementation today: https://github.com/pypa/setuptools/blob/be6c0218bcba78dbd4ea0b5a8bb9acd5d5306240/setuptools/build_meta.py#L158

As far as I can remember, these have been implemented from fairly early on in the build-backend provided by setuptools.

does setuptools distinguish global and build options in config settings?

Yes.

This would also likely trigger requests for adding --build-option to pip install, since it's currently in pip wheel only.

Sure, and that's a valid request, no? It pushes for consistency, and I'm ~sure that we can leverage that consistency to make the codebase clearer around this aspect as well.

So, all in all, I think it would be quite a bit of fuss for little benefits.

I don't think so. Something that we spent a lot of energy toward ensuring was that we're able to transition users toward the newer build mechanism without being too disruptive to their workflow, outside of certain bits of functionality that don't have equivalents that are being removed (and that goal hitting Hyrum's law).

However, this is functionality that we can implement in a manner that avoids disruption. The PEP even has an example of the behaviour I'm proposing in the config settings section (https://peps.python.org/pep-0517/#config-settings).

@pfmoore
Copy link
Member

pfmoore commented Mar 13, 2023

I can see the point of translating these options to config settings. But I think we should consider the larger question, do we want to retain these options forever, or not? There are arguments both ways:

  1. (Keep) People are (presumably) using these right now, so we'd break workflows by removing them.
  2. (Remove) There's a standards-based replacement which is already supported, so migration is straightforward.
  3. (?) The existing implementation is incomplete (--build-option on install). We can, of course, complete it.
  4. (Remove) The flags add a fair amount of complexity (command line options, requirements file support, threading the flags through the various call chains, etc.)
  5. (Remove) The flags are completely setuptools-specific, and we have a stated goal of removing all special consideration of setuptools.
  6. (Keep) The PEP calls this example out explicitly (although that section is only an example).

Personally, I find the arguments for removal compelling, but not urgent. The 6-month deprecation seems like a reasonable compromise, but I'd be fine with extending it further. I'm not convinced there's a case for retaining the options forever (and by implication, I'm against "fixing" the problem of install not having a --build-option flag).

For me, the main point is that this is another "remove special-casing of setuptools" change, and doing it in parallel with the removal of the setup.py call logic makes sense, both from an internal POV, and in terms of user disruption (having a single period of "removing setuptools-specific features" disruption for users, is arguably better than having a series of separate disruptions).

@sbidoul
Copy link
Member Author

sbidoul commented Mar 18, 2023

For me, the main point is that this is another "remove special-casing of setuptools" change, and doing it in parallel with the removal of the setup.py call logic makes sense, both from an internal POV, and in terms of user disruption (having a single period of "removing setuptools-specific features" disruption for users, is arguably better than having a series of separate disruptions).

This is also my point of view. In particular, since users still relying on --install-option must switch to something else with 23.1 it is better to state clearly right now that --global-option is not going to be around forever so they don't settle on that to discover in one year that we want to remove them too.

@pradyunsg
Copy link
Member

Fair enough! Color me convinced that we should deprecate + remove these. :)

@sbidoul sbidoul modified the milestones: 23.1, 23.3 Mar 27, 2023
@sbidoul
Copy link
Member Author

sbidoul commented Mar 27, 2023

Merged in 23.1. Moving this issue to 23.3 for removal.

kai687 pushed a commit to kai687/sphinxawesome-theme that referenced this issue Apr 16, 2023
Bumps [pip](https://github.com/pypa/pip) from 23.0.1 to 23.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pypa/pip/blob/main/NEWS.rst">pip's
changelog</a>.</em></p>
<blockquote>
<h1>23.1 (2023-04-15)</h1>
<h2>Deprecations and Removals</h2>
<ul>
<li>Remove support for the deprecated <code>--install-options</code>.
(<code>[#11358](pypa/pip#11358)
&lt;https://github.com/pypa/pip/issues/11358&gt;</code>_)</li>
<li><code>--no-binary</code> does not imply <code>setup.py
install</code> anymore. Instead a wheel will be
built locally and installed.
(<code>[#11451](pypa/pip#11451)
&lt;https://github.com/pypa/pip/issues/11451&gt;</code>_)</li>
<li><code>--no-binary</code> does not disable the cache of locally built
wheels anymore. It only
means &quot;don't download wheels&quot;.
(<code>[#11453](pypa/pip#11453)
&lt;https://github.com/pypa/pip/issues/11453&gt;</code>_)</li>
<li>Deprecate <code>--build-option</code> and
<code>--global-option</code>. Users are invited to switch to
<code>--config-settings</code>.
(<code>[#11859](pypa/pip#11859)
&lt;https://github.com/pypa/pip/issues/11859&gt;</code>_)</li>
<li>Using <code>--config-settings</code> with projects that don't have a
<code>pyproject.toml</code> now print
a deprecation warning. In the future the presence of config settings
will automatically
enable the default build backend for legacy projects and pass the
setttings to it.
(<code>[#11915](pypa/pip#11915)
&lt;https://github.com/pypa/pip/issues/11915&gt;</code>_)</li>
<li>Remove <code>setup.py install</code> fallback when building a wheel
failed for projects without
<code>pyproject.toml</code>.
(<code>[#8368](pypa/pip#8368)
&lt;https://github.com/pypa/pip/issues/8368&gt;</code>_)</li>
<li>When the <code>wheel</code> package is not installed, pip now uses
the default build backend
instead of <code>setup.py install</code> for project without
<code>pyproject.toml</code>.
(<code>[#8559](pypa/pip#8559)
&lt;https://github.com/pypa/pip/issues/8559&gt;</code>_)</li>
</ul>
<h2>Features</h2>
<ul>
<li>Specify egg-link location in assertion message when it does not
match installed location to provide better error message for debugging.
(<code>[#10476](pypa/pip#10476)
&lt;https://github.com/pypa/pip/issues/10476&gt;</code>_)</li>
<li>Present conflict information during installation after each choice
that is rejected (pass <code>-vv</code> to <code>pip install</code> to
show it) (<code>[#10937](pypa/pip#10937)
&lt;https://github.com/pypa/pip/issues/10937&gt;</code>_)</li>
<li>Display dependency chain on each Collecting/Processing log line.
(<code>[#11169](pypa/pip#11169)
&lt;https://github.com/pypa/pip/issues/11169&gt;</code>_)</li>
<li>Support a per-requirement <code>--config-settings</code> option in
requirements files.
(<code>[#11325](pypa/pip#11325)
&lt;https://github.com/pypa/pip/issues/11325&gt;</code>_)</li>
<li>The <code>--config-settings</code>/<code>-C</code> option now
supports using the same key multiple
times. When the same key is specified multiple times, all values are
passed to
the build backend as a list, as opposed to the previous behavior, where
pip would
only pass the last value if the same key was used multiple times.
(<code>[#11681](pypa/pip#11681)
&lt;https://github.com/pypa/pip/issues/11681&gt;</code>_)</li>
<li>Add <code>-C</code> as a short version of the
<code>--config-settings</code> option.
(<code>[#11786](pypa/pip#11786)
&lt;https://github.com/pypa/pip/issues/11786&gt;</code>_)</li>
<li>Reduce the number of resolver rounds, since backjumping makes the
resolver more efficient in finding solutions. This also makes
pathological cases fail quicker.
(<code>[#11908](pypa/pip#11908)
&lt;https://github.com/pypa/pip/issues/11908&gt;</code>_)</li>
<li>Warn if <code>--hash</code> is used on a line without requirement in
a requirements file.
(<code>[#11935](pypa/pip#11935)
&lt;https://github.com/pypa/pip/issues/11935&gt;</code>_)</li>
<li>Stop propagating CLI <code>--config-settings</code> to the build
dependencies. They already did
not propagate to requirements provided in requirement files. To pass the
same config
settings to several requirements, users should provide the requirements
as CLI
arguments. (<code>[#11941](pypa/pip#11941)
&lt;https://github.com/pypa/pip/issues/11941&gt;</code>_)</li>
<li>Support wheel cache when using <code>--require-hashes</code>.
(<code>[#5037](pypa/pip#5037)
&lt;https://github.com/pypa/pip/issues/5037&gt;</code>_)</li>
<li>Add <code>--keyring-provider</code> flag. See the Authentication
page in the documentation for more info.
(<code>[#8719](pypa/pip#8719)
&lt;https://github.com/pypa/pip/issues/8719&gt;</code>_)</li>
<li>In the case of virtual environments, configuration files are now
also included from the base installation.
(<code>[#9752](pypa/pip#9752)
&lt;https://github.com/pypa/pip/issues/9752&gt;</code>_)</li>
</ul>
<h2>Bug Fixes</h2>
<ul>
<li>Fix grammar by changing &quot;A new release of pip available:&quot;
to &quot;A new release of pip is available:&quot; in the notice used for
indicating that.
(<code>[#11529](pypa/pip#11529)
&lt;https://github.com/pypa/pip/issues/11529&gt;</code>_)</li>
<li>Normalize paths before checking if installed scripts are on PATH.
(<code>[#11719](pypa/pip#11719)
&lt;https://github.com/pypa/pip/issues/11719&gt;</code>_)</li>
<li>Correct the way to decide if keyring is available.
(<code>[#11774](pypa/pip#11774)
&lt;https://github.com/pypa/pip/issues/11774&gt;</code>_)</li>
<li>More consistent resolution backtracking by removing legacy hack
related to setuptools resolution
(<code>[#11837](pypa/pip#11837)
&lt;https://github.com/pypa/pip/issues/11837&gt;</code>_)</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/pypa/pip/commit/6424ac4600265490462015c2fc7f9a402dba9ed8"><code>6424ac4</code></a>
Bump for release</li>
<li><a
href="https://github.com/pypa/pip/commit/868338f9f79b58eff34dafb168aed65480d080d5"><code>868338f</code></a>
Update AUTHORS.txt</li>
<li><a
href="https://github.com/pypa/pip/commit/4f3a4f72697299da1a412cf10c919a989e0692f5"><code>4f3a4f7</code></a>
Merge pull request <a
href="https://redirect.github.com/pypa/pip/issues/11919">#11919</a> from
sbidoul/deprecate-legacy-ignore-config-setting...</li>
<li><a
href="https://github.com/pypa/pip/commit/dbf4e6842c9603792f6d3944a5c9cec17bd0a92a"><code>dbf4e68</code></a>
Merge pull request <a
href="https://redirect.github.com/pypa/pip/issues/11897">#11897</a> from
sbidoul/cache-hash-checking-sbi</li>
<li><a
href="https://github.com/pypa/pip/commit/efe2d27451d50b165df78093bf5885da713fbdf8"><code>efe2d27</code></a>
Further refactor is_wheel_from_cache</li>
<li><a
href="https://github.com/pypa/pip/commit/4beca6b4c9c510b19dbb6180e962425b89e8c839"><code>4beca6b</code></a>
Improve test</li>
<li><a
href="https://github.com/pypa/pip/commit/bd746e3136e5e1be2374a079bac66071dd967a8c"><code>bd746e3</code></a>
Introduce ireq.cached_wheel_source_link</li>
<li><a
href="https://github.com/pypa/pip/commit/caafe6e87d4f2998a77b194297e1c204cf6e10c2"><code>caafe6e</code></a>
Add a couple of asserts</li>
<li><a
href="https://github.com/pypa/pip/commit/a6ef6485be9512f18121298b058797c578f65d45"><code>a6ef648</code></a>
Rename original_link_is_in_wheel_cache to is_wheel_from_cache</li>
<li><a
href="https://github.com/pypa/pip/commit/ff8c8e38887880ad81ffd7cfc6a8373213c087b7"><code>ff8c8e3</code></a>
Cosmetics</li>
<li>Additional commits viewable in <a
href="https://github.com/pypa/pip/compare/23.0.1...23.1">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pip&package-manager=pip&previous-version=23.0.1&new-version=23.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
inmantaci pushed a commit to inmanta/inmanta-core that referenced this issue Apr 17, 2023
Bumps [pip](https://github.com/pypa/pip) from 23.0.1 to 23.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/pypa/pip/blob/main/NEWS.rst">pip's changelog</a>.</em></p>
<blockquote>
<h1>23.1 (2023-04-15)</h1>
<h2>Deprecations and Removals</h2>
<ul>
<li>Remove support for the deprecated <code>--install-options</code>. (<code>[#11358](pypa/pip#11358) &lt;https://github.com/pypa/pip/issues/11358&gt;</code>_)</li>
<li><code>--no-binary</code> does not imply <code>setup.py install</code> anymore. Instead a wheel will be
built locally and installed. (<code>[#11451](pypa/pip#11451) &lt;https://github.com/pypa/pip/issues/11451&gt;</code>_)</li>
<li><code>--no-binary</code> does not disable the cache of locally built wheels anymore. It only
means &quot;don't download wheels&quot;. (<code>[#11453](pypa/pip#11453) &lt;https://github.com/pypa/pip/issues/11453&gt;</code>_)</li>
<li>Deprecate <code>--build-option</code> and <code>--global-option</code>. Users are invited to switch to
<code>--config-settings</code>. (<code>[#11859](pypa/pip#11859) &lt;https://github.com/pypa/pip/issues/11859&gt;</code>_)</li>
<li>Using <code>--config-settings</code> with projects that don't have a <code>pyproject.toml</code> now print
a deprecation warning. In the future the presence of config settings will automatically
enable the default build backend for legacy projects and pass the setttings to it. (<code>[#11915](pypa/pip#11915) &lt;https://github.com/pypa/pip/issues/11915&gt;</code>_)</li>
<li>Remove <code>setup.py install</code> fallback when building a wheel failed for projects without
<code>pyproject.toml</code>. (<code>[#8368](pypa/pip#8368) &lt;https://github.com/pypa/pip/issues/8368&gt;</code>_)</li>
<li>When the <code>wheel</code> package is not installed, pip now uses the default build backend
instead of <code>setup.py install</code> for project without <code>pyproject.toml</code>. (<code>[#8559](pypa/pip#8559) &lt;https://github.com/pypa/pip/issues/8559&gt;</code>_)</li>
</ul>
<h2>Features</h2>
<ul>
<li>Specify egg-link location in assertion message when it does not match installed location to provide better error message for debugging. (<code>[#10476](pypa/pip#10476) &lt;https://github.com/pypa/pip/issues/10476&gt;</code>_)</li>
<li>Present conflict information during installation after each choice that is rejected (pass <code>-vv</code> to <code>pip install</code> to show it) (<code>[#10937](pypa/pip#10937) &lt;https://github.com/pypa/pip/issues/10937&gt;</code>_)</li>
<li>Display dependency chain on each Collecting/Processing log line. (<code>[#11169](pypa/pip#11169) &lt;https://github.com/pypa/pip/issues/11169&gt;</code>_)</li>
<li>Support a per-requirement <code>--config-settings</code> option in requirements files. (<code>[#11325](pypa/pip#11325) &lt;https://github.com/pypa/pip/issues/11325&gt;</code>_)</li>
<li>The <code>--config-settings</code>/<code>-C</code> option now supports using the same key multiple
times. When the same key is specified multiple times, all values are passed to
the build backend as a list, as opposed to the previous behavior, where pip would
only pass the last value if the same key was used multiple times. (<code>[#11681](pypa/pip#11681) &lt;https://github.com/pypa/pip/issues/11681&gt;</code>_)</li>
<li>Add <code>-C</code> as a short version of the <code>--config-settings</code> option. (<code>[#11786](pypa/pip#11786) &lt;https://github.com/pypa/pip/issues/11786&gt;</code>_)</li>
<li>Reduce the number of resolver rounds, since backjumping makes the resolver more efficient in finding solutions. This also makes pathological cases fail quicker. (<code>[#11908](pypa/pip#11908) &lt;https://github.com/pypa/pip/issues/11908&gt;</code>_)</li>
<li>Warn if <code>--hash</code> is used on a line without requirement in a requirements file. (<code>[#11935](pypa/pip#11935) &lt;https://github.com/pypa/pip/issues/11935&gt;</code>_)</li>
<li>Stop propagating CLI <code>--config-settings</code> to the build dependencies. They already did
not propagate to requirements provided in requirement files. To pass the same config
settings to several requirements, users should provide the requirements as CLI
arguments. (<code>[#11941](pypa/pip#11941) &lt;https://github.com/pypa/pip/issues/11941&gt;</code>_)</li>
<li>Support wheel cache when using <code>--require-hashes</code>. (<code>[#5037](pypa/pip#5037) &lt;https://github.com/pypa/pip/issues/5037&gt;</code>_)</li>
<li>Add <code>--keyring-provider</code> flag. See the Authentication page in the documentation for more info. (<code>[#8719](pypa/pip#8719) &lt;https://github.com/pypa/pip/issues/8719&gt;</code>_)</li>
<li>In the case of virtual environments, configuration files are now also included from the base installation. (<code>[#9752](pypa/pip#9752) &lt;https://github.com/pypa/pip/issues/9752&gt;</code>_)</li>
</ul>
<h2>Bug Fixes</h2>
<ul>
<li>Fix grammar by changing &quot;A new release of pip available:&quot; to &quot;A new release of pip is available:&quot; in the notice used for indicating that. (<code>[#11529](pypa/pip#11529) &lt;https://github.com/pypa/pip/issues/11529&gt;</code>_)</li>
<li>Normalize paths before checking if installed scripts are on PATH. (<code>[#11719](pypa/pip#11719) &lt;https://github.com/pypa/pip/issues/11719&gt;</code>_)</li>
<li>Correct the way to decide if keyring is available. (<code>[#11774](pypa/pip#11774) &lt;https://github.com/pypa/pip/issues/11774&gt;</code>_)</li>
<li>More consistent resolution backtracking by removing legacy hack related to setuptools resolution (<code>[#11837](pypa/pip#11837) &lt;https://github.com/pypa/pip/issues/11837&gt;</code>_)</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/pypa/pip/commit/6424ac4600265490462015c2fc7f9a402dba9ed8"><code>6424ac4</code></a> Bump for release</li>
<li><a href="https://github.com/pypa/pip/commit/868338f9f79b58eff34dafb168aed65480d080d5"><code>868338f</code></a> Update AUTHORS.txt</li>
<li><a href="https://github.com/pypa/pip/commit/4f3a4f72697299da1a412cf10c919a989e0692f5"><code>4f3a4f7</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11919">#11919</a> from sbidoul/deprecate-legacy-ignore-config-setting...</li>
<li><a href="https://github.com/pypa/pip/commit/dbf4e6842c9603792f6d3944a5c9cec17bd0a92a"><code>dbf4e68</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11897">#11897</a> from sbidoul/cache-hash-checking-sbi</li>
<li><a href="https://github.com/pypa/pip/commit/efe2d27451d50b165df78093bf5885da713fbdf8"><code>efe2d27</code></a> Further refactor is_wheel_from_cache</li>
<li><a href="https://github.com/pypa/pip/commit/4beca6b4c9c510b19dbb6180e962425b89e8c839"><code>4beca6b</code></a> Improve test</li>
<li><a href="https://github.com/pypa/pip/commit/bd746e3136e5e1be2374a079bac66071dd967a8c"><code>bd746e3</code></a> Introduce ireq.cached_wheel_source_link</li>
<li><a href="https://github.com/pypa/pip/commit/caafe6e87d4f2998a77b194297e1c204cf6e10c2"><code>caafe6e</code></a> Add a couple of asserts</li>
<li><a href="https://github.com/pypa/pip/commit/a6ef6485be9512f18121298b058797c578f65d45"><code>a6ef648</code></a> Rename original_link_is_in_wheel_cache to is_wheel_from_cache</li>
<li><a href="https://github.com/pypa/pip/commit/ff8c8e38887880ad81ffd7cfc6a8373213c087b7"><code>ff8c8e3</code></a> Cosmetics</li>
<li>Additional commits viewable in <a href="https://github.com/pypa/pip/compare/23.0.1...23.1">compare view</a></li>
</ul>
</details>
<br />

[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pip&package-manager=pip&previous-version=23.0.1&new-version=23.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

</details>
mergify bot pushed a commit to aws/jsii that referenced this issue Apr 17, 2023
…s/@jsii/python-runtime (#4060)

Updates the requirements on [pip](https://github.com/pypa/pip) to permit the latest version.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/pypa/pip/blob/main/NEWS.rst">pip's changelog</a>.</em></p>
<blockquote>
<h1>23.1 (2023-04-15)</h1>
<h2>Deprecations and Removals</h2>
<ul>
<li>Remove support for the deprecated <code>--install-options</code>. (<code>[#11358](pypa/pip#11358) &lt;https://github.com/pypa/pip/issues/11358&gt;</code>_)</li>
<li><code>--no-binary</code> does not imply <code>setup.py install</code> anymore. Instead a wheel will be
built locally and installed. (<code>[#11451](pypa/pip#11451) &lt;https://github.com/pypa/pip/issues/11451&gt;</code>_)</li>
<li><code>--no-binary</code> does not disable the cache of locally built wheels anymore. It only
means &quot;don't download wheels&quot;. (<code>[#11453](pypa/pip#11453) &lt;https://github.com/pypa/pip/issues/11453&gt;</code>_)</li>
<li>Deprecate <code>--build-option</code> and <code>--global-option</code>. Users are invited to switch to
<code>--config-settings</code>. (<code>[#11859](pypa/pip#11859) &lt;https://github.com/pypa/pip/issues/11859&gt;</code>_)</li>
<li>Using <code>--config-settings</code> with projects that don't have a <code>pyproject.toml</code> now print
a deprecation warning. In the future the presence of config settings will automatically
enable the default build backend for legacy projects and pass the setttings to it. (<code>[#11915](pypa/pip#11915) &lt;https://github.com/pypa/pip/issues/11915&gt;</code>_)</li>
<li>Remove <code>setup.py install</code> fallback when building a wheel failed for projects without
<code>pyproject.toml</code>. (<code>[#8368](pypa/pip#8368) &lt;https://github.com/pypa/pip/issues/8368&gt;</code>_)</li>
<li>When the <code>wheel</code> package is not installed, pip now uses the default build backend
instead of <code>setup.py install</code> for project without <code>pyproject.toml</code>. (<code>[#8559](pypa/pip#8559) &lt;https://github.com/pypa/pip/issues/8559&gt;</code>_)</li>
</ul>
<h2>Features</h2>
<ul>
<li>Specify egg-link location in assertion message when it does not match installed location to provide better error message for debugging. (<code>[#10476](pypa/pip#10476) &lt;https://github.com/pypa/pip/issues/10476&gt;</code>_)</li>
<li>Present conflict information during installation after each choice that is rejected (pass <code>-vv</code> to <code>pip install</code> to show it) (<code>[#10937](pypa/pip#10937) &lt;https://github.com/pypa/pip/issues/10937&gt;</code>_)</li>
<li>Display dependency chain on each Collecting/Processing log line. (<code>[#11169](pypa/pip#11169) &lt;https://github.com/pypa/pip/issues/11169&gt;</code>_)</li>
<li>Support a per-requirement <code>--config-settings</code> option in requirements files. (<code>[#11325](pypa/pip#11325) &lt;https://github.com/pypa/pip/issues/11325&gt;</code>_)</li>
<li>The <code>--config-settings</code>/<code>-C</code> option now supports using the same key multiple
times. When the same key is specified multiple times, all values are passed to
the build backend as a list, as opposed to the previous behavior, where pip would
only pass the last value if the same key was used multiple times. (<code>[#11681](pypa/pip#11681) &lt;https://github.com/pypa/pip/issues/11681&gt;</code>_)</li>
<li>Add <code>-C</code> as a short version of the <code>--config-settings</code> option. (<code>[#11786](pypa/pip#11786) &lt;https://github.com/pypa/pip/issues/11786&gt;</code>_)</li>
<li>Reduce the number of resolver rounds, since backjumping makes the resolver more efficient in finding solutions. This also makes pathological cases fail quicker. (<code>[#11908](pypa/pip#11908) &lt;https://github.com/pypa/pip/issues/11908&gt;</code>_)</li>
<li>Warn if <code>--hash</code> is used on a line without requirement in a requirements file. (<code>[#11935](pypa/pip#11935) &lt;https://github.com/pypa/pip/issues/11935&gt;</code>_)</li>
<li>Stop propagating CLI <code>--config-settings</code> to the build dependencies. They already did
not propagate to requirements provided in requirement files. To pass the same config
settings to several requirements, users should provide the requirements as CLI
arguments. (<code>[#11941](pypa/pip#11941) &lt;https://github.com/pypa/pip/issues/11941&gt;</code>_)</li>
<li>Support wheel cache when using <code>--require-hashes</code>. (<code>[#5037](pypa/pip#5037) &lt;https://github.com/pypa/pip/issues/5037&gt;</code>_)</li>
<li>Add <code>--keyring-provider</code> flag. See the Authentication page in the documentation for more info. (<code>[#8719](pypa/pip#8719) &lt;https://github.com/pypa/pip/issues/8719&gt;</code>_)</li>
<li>In the case of virtual environments, configuration files are now also included from the base installation. (<code>[#9752](pypa/pip#9752) &lt;https://github.com/pypa/pip/issues/9752&gt;</code>_)</li>
</ul>
<h2>Bug Fixes</h2>
<ul>
<li>Fix grammar by changing &quot;A new release of pip available:&quot; to &quot;A new release of pip is available:&quot; in the notice used for indicating that. (<code>[#11529](pypa/pip#11529) &lt;https://github.com/pypa/pip/issues/11529&gt;</code>_)</li>
<li>Normalize paths before checking if installed scripts are on PATH. (<code>[#11719](pypa/pip#11719) &lt;https://github.com/pypa/pip/issues/11719&gt;</code>_)</li>
<li>Correct the way to decide if keyring is available. (<code>[#11774](pypa/pip#11774) &lt;https://github.com/pypa/pip/issues/11774&gt;</code>_)</li>
<li>More consistent resolution backtracking by removing legacy hack related to setuptools resolution (<code>[#11837](pypa/pip#11837) &lt;https://github.com/pypa/pip/issues/11837&gt;</code>_)</li>
</ul>

</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/pypa/pip/commit/6424ac4600265490462015c2fc7f9a402dba9ed8"><code>6424ac4</code></a> Bump for release</li>
<li><a href="https://github.com/pypa/pip/commit/868338f9f79b58eff34dafb168aed65480d080d5"><code>868338f</code></a> Update AUTHORS.txt</li>
<li><a href="https://github.com/pypa/pip/commit/4f3a4f72697299da1a412cf10c919a989e0692f5"><code>4f3a4f7</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11919">#11919</a> from sbidoul/deprecate-legacy-ignore-config-setting...</li>
<li><a href="https://github.com/pypa/pip/commit/dbf4e6842c9603792f6d3944a5c9cec17bd0a92a"><code>dbf4e68</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11897">#11897</a> from sbidoul/cache-hash-checking-sbi</li>
<li><a href="https://github.com/pypa/pip/commit/efe2d27451d50b165df78093bf5885da713fbdf8"><code>efe2d27</code></a> Further refactor is_wheel_from_cache</li>
<li><a href="https://github.com/pypa/pip/commit/4beca6b4c9c510b19dbb6180e962425b89e8c839"><code>4beca6b</code></a> Improve test</li>
<li><a href="https://github.com/pypa/pip/commit/bd746e3136e5e1be2374a079bac66071dd967a8c"><code>bd746e3</code></a> Introduce ireq.cached_wheel_source_link</li>
<li><a href="https://github.com/pypa/pip/commit/caafe6e87d4f2998a77b194297e1c204cf6e10c2"><code>caafe6e</code></a> Add a couple of asserts</li>
<li><a href="https://github.com/pypa/pip/commit/a6ef6485be9512f18121298b058797c578f65d45"><code>a6ef648</code></a> Rename original_link_is_in_wheel_cache to is_wheel_from_cache</li>
<li><a href="https://github.com/pypa/pip/commit/ff8c8e38887880ad81ffd7cfc6a8373213c087b7"><code>ff8c8e3</code></a> Cosmetics</li>
<li>Additional commits viewable in <a href="https://github.com/pypa/pip/compare/23.0...23.1">compare view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>
inmantaci pushed a commit to inmanta/inmanta-core that referenced this issue Apr 18, 2023
Bumps [pip](https://github.com/pypa/pip) from 23.0.1 to 23.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/pypa/pip/blob/main/NEWS.rst">pip's changelog</a>.</em></p>
<blockquote>
<h1>23.1 (2023-04-15)</h1>
<h2>Deprecations and Removals</h2>
<ul>
<li>Remove support for the deprecated <code>--install-options</code>. (<code>[#11358](pypa/pip#11358) &lt;https://github.com/pypa/pip/issues/11358&gt;</code>_)</li>
<li><code>--no-binary</code> does not imply <code>setup.py install</code> anymore. Instead a wheel will be
built locally and installed. (<code>[#11451](pypa/pip#11451) &lt;https://github.com/pypa/pip/issues/11451&gt;</code>_)</li>
<li><code>--no-binary</code> does not disable the cache of locally built wheels anymore. It only
means &quot;don't download wheels&quot;. (<code>[#11453](pypa/pip#11453) &lt;https://github.com/pypa/pip/issues/11453&gt;</code>_)</li>
<li>Deprecate <code>--build-option</code> and <code>--global-option</code>. Users are invited to switch to
<code>--config-settings</code>. (<code>[#11859](pypa/pip#11859) &lt;https://github.com/pypa/pip/issues/11859&gt;</code>_)</li>
<li>Using <code>--config-settings</code> with projects that don't have a <code>pyproject.toml</code> now prints
a deprecation warning. In the future the presence of config settings will automatically
enable the default build backend for legacy projects and pass the setttings to it. (<code>[#11915](pypa/pip#11915) &lt;https://github.com/pypa/pip/issues/11915&gt;</code>_)</li>
<li>Remove <code>setup.py install</code> fallback when building a wheel failed for projects without
<code>pyproject.toml</code>. (<code>[#8368](pypa/pip#8368) &lt;https://github.com/pypa/pip/issues/8368&gt;</code>_)</li>
<li>When the <code>wheel</code> package is not installed, pip now uses the default build backend
instead of <code>setup.py install</code> and <code>setup.py develop</code> for project without
<code>pyproject.toml</code>. (<code>[#8559](pypa/pip#8559) &lt;https://github.com/pypa/pip/issues/8559&gt;</code>_)</li>
</ul>
<h2>Features</h2>
<ul>
<li>Specify egg-link location in assertion message when it does not match installed location to provide better error message for debugging. (<code>[#10476](pypa/pip#10476) &lt;https://github.com/pypa/pip/issues/10476&gt;</code>_)</li>
<li>Present conflict information during installation after each choice that is rejected (pass <code>-vv</code> to <code>pip install</code> to show it) (<code>[#10937](pypa/pip#10937) &lt;https://github.com/pypa/pip/issues/10937&gt;</code>_)</li>
<li>Display dependency chain on each Collecting/Processing log line. (<code>[#11169](pypa/pip#11169) &lt;https://github.com/pypa/pip/issues/11169&gt;</code>_)</li>
<li>Support a per-requirement <code>--config-settings</code> option in requirements files. (<code>[#11325](pypa/pip#11325) &lt;https://github.com/pypa/pip/issues/11325&gt;</code>_)</li>
<li>The <code>--config-settings</code>/<code>-C</code> option now supports using the same key multiple
times. When the same key is specified multiple times, all values are passed to
the build backend as a list, as opposed to the previous behavior, where pip would
only pass the last value if the same key was used multiple times. (<code>[#11681](pypa/pip#11681) &lt;https://github.com/pypa/pip/issues/11681&gt;</code>_)</li>
<li>Add <code>-C</code> as a short version of the <code>--config-settings</code> option. (<code>[#11786](pypa/pip#11786) &lt;https://github.com/pypa/pip/issues/11786&gt;</code>_)</li>
<li>Reduce the number of resolver rounds, since backjumping makes the resolver more efficient in finding solutions. This also makes pathological cases fail quicker. (<code>[#11908](pypa/pip#11908) &lt;https://github.com/pypa/pip/issues/11908&gt;</code>_)</li>
<li>Warn if <code>--hash</code> is used on a line without requirement in a requirements file. (<code>[#11935](pypa/pip#11935) &lt;https://github.com/pypa/pip/issues/11935&gt;</code>_)</li>
<li>Stop propagating CLI <code>--config-settings</code> to the build dependencies. They already did
not propagate to requirements provided in requirement files. To pass the same config
settings to several requirements, users should provide the requirements as CLI
arguments. (<code>[#11941](pypa/pip#11941) &lt;https://github.com/pypa/pip/issues/11941&gt;</code>_)</li>
<li>Support wheel cache when using <code>--require-hashes</code>. (<code>[#5037](pypa/pip#5037) &lt;https://github.com/pypa/pip/issues/5037&gt;</code>_)</li>
<li>Add <code>--keyring-provider</code> flag. See the Authentication page in the documentation for more info. (<code>[#8719](pypa/pip#8719) &lt;https://github.com/pypa/pip/issues/8719&gt;</code>_)</li>
<li>In the case of virtual environments, configuration files are now also included from the base installation. (<code>[#9752](pypa/pip#9752) &lt;https://github.com/pypa/pip/issues/9752&gt;</code>_)</li>
</ul>
<h2>Bug Fixes</h2>
<ul>
<li>Fix grammar by changing &quot;A new release of pip available:&quot; to &quot;A new release of pip is available:&quot; in the notice used for indicating that. (<code>[#11529](pypa/pip#11529) &lt;https://github.com/pypa/pip/issues/11529&gt;</code>_)</li>
<li>Normalize paths before checking if installed scripts are on PATH. (<code>[#11719](pypa/pip#11719) &lt;https://github.com/pypa/pip/issues/11719&gt;</code>_)</li>
<li>Correct the way to decide if keyring is available. (<code>[#11774](pypa/pip#11774) &lt;https://github.com/pypa/pip/issues/11774&gt;</code>_)</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/pypa/pip/commit/6424ac4600265490462015c2fc7f9a402dba9ed8"><code>6424ac4</code></a> Bump for release</li>
<li><a href="https://github.com/pypa/pip/commit/868338f9f79b58eff34dafb168aed65480d080d5"><code>868338f</code></a> Update AUTHORS.txt</li>
<li><a href="https://github.com/pypa/pip/commit/4f3a4f72697299da1a412cf10c919a989e0692f5"><code>4f3a4f7</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11919">#11919</a> from sbidoul/deprecate-legacy-ignore-config-setting...</li>
<li><a href="https://github.com/pypa/pip/commit/dbf4e6842c9603792f6d3944a5c9cec17bd0a92a"><code>dbf4e68</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11897">#11897</a> from sbidoul/cache-hash-checking-sbi</li>
<li><a href="https://github.com/pypa/pip/commit/efe2d27451d50b165df78093bf5885da713fbdf8"><code>efe2d27</code></a> Further refactor is_wheel_from_cache</li>
<li><a href="https://github.com/pypa/pip/commit/4beca6b4c9c510b19dbb6180e962425b89e8c839"><code>4beca6b</code></a> Improve test</li>
<li><a href="https://github.com/pypa/pip/commit/bd746e3136e5e1be2374a079bac66071dd967a8c"><code>bd746e3</code></a> Introduce ireq.cached_wheel_source_link</li>
<li><a href="https://github.com/pypa/pip/commit/caafe6e87d4f2998a77b194297e1c204cf6e10c2"><code>caafe6e</code></a> Add a couple of asserts</li>
<li><a href="https://github.com/pypa/pip/commit/a6ef6485be9512f18121298b058797c578f65d45"><code>a6ef648</code></a> Rename original_link_is_in_wheel_cache to is_wheel_from_cache</li>
<li><a href="https://github.com/pypa/pip/commit/ff8c8e38887880ad81ffd7cfc6a8373213c087b7"><code>ff8c8e3</code></a> Cosmetics</li>
<li>Additional commits viewable in <a href="https://github.com/pypa/pip/compare/23.0.1...23.1">compare view</a></li>
</ul>
</details>
<br />

[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pip&package-manager=pip&previous-version=23.0.1&new-version=23.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

</details>
ludeeus pushed a commit to ludeeus/integration_blueprint that referenced this issue Apr 22, 2023
Updates the requirements on [pip](https://github.com/pypa/pip) to permit
the latest version.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pypa/pip/blob/main/NEWS.rst">pip's
changelog</a>.</em></p>
<blockquote>
<h1>23.1 (2023-04-15)</h1>
<h2>Deprecations and Removals</h2>
<ul>
<li>Remove support for the deprecated <code>--install-options</code>.
(<code>[#11358](pypa/pip#11358)
&lt;https://github.com/pypa/pip/issues/11358&gt;</code>_)</li>
<li><code>--no-binary</code> does not imply <code>setup.py
install</code> anymore. Instead a wheel will be
built locally and installed.
(<code>[#11451](pypa/pip#11451)
&lt;https://github.com/pypa/pip/issues/11451&gt;</code>_)</li>
<li><code>--no-binary</code> does not disable the cache of locally built
wheels anymore. It only
means &quot;don't download wheels&quot;.
(<code>[#11453](pypa/pip#11453)
&lt;https://github.com/pypa/pip/issues/11453&gt;</code>_)</li>
<li>Deprecate <code>--build-option</code> and
<code>--global-option</code>. Users are invited to switch to
<code>--config-settings</code>.
(<code>[#11859](pypa/pip#11859)
&lt;https://github.com/pypa/pip/issues/11859&gt;</code>_)</li>
<li>Using <code>--config-settings</code> with projects that don't have a
<code>pyproject.toml</code> now prints
a deprecation warning. In the future the presence of config settings
will automatically
enable the default build backend for legacy projects and pass the
setttings to it.
(<code>[#11915](pypa/pip#11915)
&lt;https://github.com/pypa/pip/issues/11915&gt;</code>_)</li>
<li>Remove <code>setup.py install</code> fallback when building a wheel
failed for projects without
<code>pyproject.toml</code>.
(<code>[#8368](pypa/pip#8368)
&lt;https://github.com/pypa/pip/issues/8368&gt;</code>_)</li>
<li>When the <code>wheel</code> package is not installed, pip now uses
the default build backend
instead of <code>setup.py install</code> and <code>setup.py
develop</code> for project without
<code>pyproject.toml</code>.
(<code>[#8559](pypa/pip#8559)
&lt;https://github.com/pypa/pip/issues/8559&gt;</code>_)</li>
</ul>
<h2>Features</h2>
<ul>
<li>Specify egg-link location in assertion message when it does not
match installed location to provide better error message for debugging.
(<code>[#10476](pypa/pip#10476)
&lt;https://github.com/pypa/pip/issues/10476&gt;</code>_)</li>
<li>Present conflict information during installation after each choice
that is rejected (pass <code>-vv</code> to <code>pip install</code> to
show it) (<code>[#10937](pypa/pip#10937)
&lt;https://github.com/pypa/pip/issues/10937&gt;</code>_)</li>
<li>Display dependency chain on each Collecting/Processing log line.
(<code>[#11169](pypa/pip#11169)
&lt;https://github.com/pypa/pip/issues/11169&gt;</code>_)</li>
<li>Support a per-requirement <code>--config-settings</code> option in
requirements files.
(<code>[#11325](pypa/pip#11325)
&lt;https://github.com/pypa/pip/issues/11325&gt;</code>_)</li>
<li>The <code>--config-settings</code>/<code>-C</code> option now
supports using the same key multiple
times. When the same key is specified multiple times, all values are
passed to
the build backend as a list, as opposed to the previous behavior, where
pip would
only pass the last value if the same key was used multiple times.
(<code>[#11681](pypa/pip#11681)
&lt;https://github.com/pypa/pip/issues/11681&gt;</code>_)</li>
<li>Add <code>-C</code> as a short version of the
<code>--config-settings</code> option.
(<code>[#11786](pypa/pip#11786)
&lt;https://github.com/pypa/pip/issues/11786&gt;</code>_)</li>
<li>Reduce the number of resolver rounds, since backjumping makes the
resolver more efficient in finding solutions. This also makes
pathological cases fail quicker.
(<code>[#11908](pypa/pip#11908)
&lt;https://github.com/pypa/pip/issues/11908&gt;</code>_)</li>
<li>Warn if <code>--hash</code> is used on a line without requirement in
a requirements file.
(<code>[#11935](pypa/pip#11935)
&lt;https://github.com/pypa/pip/issues/11935&gt;</code>_)</li>
<li>Stop propagating CLI <code>--config-settings</code> to the build
dependencies. They already did
not propagate to requirements provided in requirement files. To pass the
same config
settings to several requirements, users should provide the requirements
as CLI
arguments. (<code>[#11941](pypa/pip#11941)
&lt;https://github.com/pypa/pip/issues/11941&gt;</code>_)</li>
<li>Support wheel cache when using <code>--require-hashes</code>.
(<code>[#5037](pypa/pip#5037)
&lt;https://github.com/pypa/pip/issues/5037&gt;</code>_)</li>
<li>Add <code>--keyring-provider</code> flag. See the Authentication
page in the documentation for more info.
(<code>[#8719](pypa/pip#8719)
&lt;https://github.com/pypa/pip/issues/8719&gt;</code>_)</li>
<li>In the case of virtual environments, configuration files are now
also included from the base installation.
(<code>[#9752](pypa/pip#9752)
&lt;https://github.com/pypa/pip/issues/9752&gt;</code>_)</li>
</ul>
<h2>Bug Fixes</h2>
<ul>
<li>Fix grammar by changing &quot;A new release of pip available:&quot;
to &quot;A new release of pip is available:&quot; in the notice used for
indicating that.
(<code>[#11529](pypa/pip#11529)
&lt;https://github.com/pypa/pip/issues/11529&gt;</code>_)</li>
<li>Normalize paths before checking if installed scripts are on PATH.
(<code>[#11719](pypa/pip#11719)
&lt;https://github.com/pypa/pip/issues/11719&gt;</code>_)</li>
<li>Correct the way to decide if keyring is available.
(<code>[#11774](pypa/pip#11774)
&lt;https://github.com/pypa/pip/issues/11774&gt;</code>_)</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/pypa/pip/commit/6424ac4600265490462015c2fc7f9a402dba9ed8"><code>6424ac4</code></a>
Bump for release</li>
<li><a
href="https://github.com/pypa/pip/commit/868338f9f79b58eff34dafb168aed65480d080d5"><code>868338f</code></a>
Update AUTHORS.txt</li>
<li><a
href="https://github.com/pypa/pip/commit/4f3a4f72697299da1a412cf10c919a989e0692f5"><code>4f3a4f7</code></a>
Merge pull request <a
href="https://redirect.github.com/pypa/pip/issues/11919">#11919</a> from
sbidoul/deprecate-legacy-ignore-config-setting...</li>
<li><a
href="https://github.com/pypa/pip/commit/dbf4e6842c9603792f6d3944a5c9cec17bd0a92a"><code>dbf4e68</code></a>
Merge pull request <a
href="https://redirect.github.com/pypa/pip/issues/11897">#11897</a> from
sbidoul/cache-hash-checking-sbi</li>
<li><a
href="https://github.com/pypa/pip/commit/efe2d27451d50b165df78093bf5885da713fbdf8"><code>efe2d27</code></a>
Further refactor is_wheel_from_cache</li>
<li><a
href="https://github.com/pypa/pip/commit/4beca6b4c9c510b19dbb6180e962425b89e8c839"><code>4beca6b</code></a>
Improve test</li>
<li><a
href="https://github.com/pypa/pip/commit/bd746e3136e5e1be2374a079bac66071dd967a8c"><code>bd746e3</code></a>
Introduce ireq.cached_wheel_source_link</li>
<li><a
href="https://github.com/pypa/pip/commit/caafe6e87d4f2998a77b194297e1c204cf6e10c2"><code>caafe6e</code></a>
Add a couple of asserts</li>
<li><a
href="https://github.com/pypa/pip/commit/a6ef6485be9512f18121298b058797c578f65d45"><code>a6ef648</code></a>
Rename original_link_is_in_wheel_cache to is_wheel_from_cache</li>
<li><a
href="https://github.com/pypa/pip/commit/ff8c8e38887880ad81ffd7cfc6a8373213c087b7"><code>ff8c8e3</code></a>
Cosmetics</li>
<li>Additional commits viewable in <a
href="https://github.com/pypa/pip/compare/21.0...23.1">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
fredck pushed a commit to fredck/lightener that referenced this issue May 10, 2023
Updates the requirements on [pip](https://github.com/pypa/pip) to permit
the latest version.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pypa/pip/blob/main/NEWS.rst">pip's
changelog</a>.</em></p>
<blockquote>
<h1>23.1 (2023-04-15)</h1>
<h2>Deprecations and Removals</h2>
<ul>
<li>Remove support for the deprecated <code>--install-options</code>.
(<code>[#11358](pypa/pip#11358)
&lt;https://github.com/pypa/pip/issues/11358&gt;</code>_)</li>
<li><code>--no-binary</code> does not imply <code>setup.py
install</code> anymore. Instead a wheel will be
built locally and installed.
(<code>[#11451](pypa/pip#11451)
&lt;https://github.com/pypa/pip/issues/11451&gt;</code>_)</li>
<li><code>--no-binary</code> does not disable the cache of locally built
wheels anymore. It only
means &quot;don't download wheels&quot;.
(<code>[#11453](pypa/pip#11453)
&lt;https://github.com/pypa/pip/issues/11453&gt;</code>_)</li>
<li>Deprecate <code>--build-option</code> and
<code>--global-option</code>. Users are invited to switch to
<code>--config-settings</code>.
(<code>[#11859](pypa/pip#11859)
&lt;https://github.com/pypa/pip/issues/11859&gt;</code>_)</li>
<li>Using <code>--config-settings</code> with projects that don't have a
<code>pyproject.toml</code> now prints
a deprecation warning. In the future the presence of config settings
will automatically
enable the default build backend for legacy projects and pass the
setttings to it.
(<code>[#11915](pypa/pip#11915)
&lt;https://github.com/pypa/pip/issues/11915&gt;</code>_)</li>
<li>Remove <code>setup.py install</code> fallback when building a wheel
failed for projects without
<code>pyproject.toml</code>.
(<code>[#8368](pypa/pip#8368)
&lt;https://github.com/pypa/pip/issues/8368&gt;</code>_)</li>
<li>When the <code>wheel</code> package is not installed, pip now uses
the default build backend
instead of <code>setup.py install</code> and <code>setup.py
develop</code> for project without
<code>pyproject.toml</code>.
(<code>[#8559](pypa/pip#8559)
&lt;https://github.com/pypa/pip/issues/8559&gt;</code>_)</li>
</ul>
<h2>Features</h2>
<ul>
<li>Specify egg-link location in assertion message when it does not
match installed location to provide better error message for debugging.
(<code>[#10476](pypa/pip#10476)
&lt;https://github.com/pypa/pip/issues/10476&gt;</code>_)</li>
<li>Present conflict information during installation after each choice
that is rejected (pass <code>-vv</code> to <code>pip install</code> to
show it) (<code>[#10937](pypa/pip#10937)
&lt;https://github.com/pypa/pip/issues/10937&gt;</code>_)</li>
<li>Display dependency chain on each Collecting/Processing log line.
(<code>[#11169](pypa/pip#11169)
&lt;https://github.com/pypa/pip/issues/11169&gt;</code>_)</li>
<li>Support a per-requirement <code>--config-settings</code> option in
requirements files.
(<code>[#11325](pypa/pip#11325)
&lt;https://github.com/pypa/pip/issues/11325&gt;</code>_)</li>
<li>The <code>--config-settings</code>/<code>-C</code> option now
supports using the same key multiple
times. When the same key is specified multiple times, all values are
passed to
the build backend as a list, as opposed to the previous behavior, where
pip would
only pass the last value if the same key was used multiple times.
(<code>[#11681](pypa/pip#11681)
&lt;https://github.com/pypa/pip/issues/11681&gt;</code>_)</li>
<li>Add <code>-C</code> as a short version of the
<code>--config-settings</code> option.
(<code>[#11786](pypa/pip#11786)
&lt;https://github.com/pypa/pip/issues/11786&gt;</code>_)</li>
<li>Reduce the number of resolver rounds, since backjumping makes the
resolver more efficient in finding solutions. This also makes
pathological cases fail quicker.
(<code>[#11908](pypa/pip#11908)
&lt;https://github.com/pypa/pip/issues/11908&gt;</code>_)</li>
<li>Warn if <code>--hash</code> is used on a line without requirement in
a requirements file.
(<code>[#11935](pypa/pip#11935)
&lt;https://github.com/pypa/pip/issues/11935&gt;</code>_)</li>
<li>Stop propagating CLI <code>--config-settings</code> to the build
dependencies. They already did
not propagate to requirements provided in requirement files. To pass the
same config
settings to several requirements, users should provide the requirements
as CLI
arguments. (<code>[#11941](pypa/pip#11941)
&lt;https://github.com/pypa/pip/issues/11941&gt;</code>_)</li>
<li>Support wheel cache when using <code>--require-hashes</code>.
(<code>[#5037](pypa/pip#5037)
&lt;https://github.com/pypa/pip/issues/5037&gt;</code>_)</li>
<li>Add <code>--keyring-provider</code> flag. See the Authentication
page in the documentation for more info.
(<code>[#8719](pypa/pip#8719)
&lt;https://github.com/pypa/pip/issues/8719&gt;</code>_)</li>
<li>In the case of virtual environments, configuration files are now
also included from the base installation.
(<code>[#9752](pypa/pip#9752)
&lt;https://github.com/pypa/pip/issues/9752&gt;</code>_)</li>
</ul>
<h2>Bug Fixes</h2>
<ul>
<li>Fix grammar by changing &quot;A new release of pip available:&quot;
to &quot;A new release of pip is available:&quot; in the notice used for
indicating that.
(<code>[#11529](pypa/pip#11529)
&lt;https://github.com/pypa/pip/issues/11529&gt;</code>_)</li>
<li>Normalize paths before checking if installed scripts are on PATH.
(<code>[#11719](pypa/pip#11719)
&lt;https://github.com/pypa/pip/issues/11719&gt;</code>_)</li>
<li>Correct the way to decide if keyring is available.
(<code>[#11774](pypa/pip#11774)
&lt;https://github.com/pypa/pip/issues/11774&gt;</code>_)</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/pypa/pip/commit/6424ac4600265490462015c2fc7f9a402dba9ed8"><code>6424ac4</code></a>
Bump for release</li>
<li><a
href="https://github.com/pypa/pip/commit/868338f9f79b58eff34dafb168aed65480d080d5"><code>868338f</code></a>
Update AUTHORS.txt</li>
<li><a
href="https://github.com/pypa/pip/commit/4f3a4f72697299da1a412cf10c919a989e0692f5"><code>4f3a4f7</code></a>
Merge pull request <a
href="https://redirect.github.com/pypa/pip/issues/11919">#11919</a> from
sbidoul/deprecate-legacy-ignore-config-setting...</li>
<li><a
href="https://github.com/pypa/pip/commit/dbf4e6842c9603792f6d3944a5c9cec17bd0a92a"><code>dbf4e68</code></a>
Merge pull request <a
href="https://redirect.github.com/pypa/pip/issues/11897">#11897</a> from
sbidoul/cache-hash-checking-sbi</li>
<li><a
href="https://github.com/pypa/pip/commit/efe2d27451d50b165df78093bf5885da713fbdf8"><code>efe2d27</code></a>
Further refactor is_wheel_from_cache</li>
<li><a
href="https://github.com/pypa/pip/commit/4beca6b4c9c510b19dbb6180e962425b89e8c839"><code>4beca6b</code></a>
Improve test</li>
<li><a
href="https://github.com/pypa/pip/commit/bd746e3136e5e1be2374a079bac66071dd967a8c"><code>bd746e3</code></a>
Introduce ireq.cached_wheel_source_link</li>
<li><a
href="https://github.com/pypa/pip/commit/caafe6e87d4f2998a77b194297e1c204cf6e10c2"><code>caafe6e</code></a>
Add a couple of asserts</li>
<li><a
href="https://github.com/pypa/pip/commit/a6ef6485be9512f18121298b058797c578f65d45"><code>a6ef648</code></a>
Rename original_link_is_in_wheel_cache to is_wheel_from_cache</li>
<li><a
href="https://github.com/pypa/pip/commit/ff8c8e38887880ad81ffd7cfc6a8373213c087b7"><code>ff8c8e3</code></a>
Cosmetics</li>
<li>Additional commits viewable in <a
href="https://github.com/pypa/pip/compare/21.0...23.1">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
mergify bot pushed a commit to aws/jsii that referenced this issue May 12, 2023
…mak/test/generated-code (#4072)

Bumps [pip](https://github.com/pypa/pip) from 23.0.1 to 23.1.2.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/pypa/pip/blob/main/NEWS.rst">pip's changelog</a>.</em></p>
<blockquote>
<h1>23.1.2 (2023-04-26)</h1>
<h2>Vendored Libraries</h2>
<ul>
<li>Upgrade setuptools to 67.7.2</li>
</ul>
<h1>23.1.1 (2023-04-22)</h1>
<h2>Bug Fixes</h2>
<ul>
<li>Revert <code>[#11487](pypa/pip#11487) &lt;https://github.com/pypa/pip/pull/11487&gt;</code><em>, as it causes issues with virtualenvs created by the Windows Store distribution of Python. (<code>[#11987](pypa/pip#11987) &lt;https://github.com/pypa/pip/issues/11987&gt;</code></em>)</li>
</ul>
<h2>Vendored Libraries</h2>
<ul>
<li>Revert pkg_resources (via setuptools) back to 65.6.3</li>
</ul>
<h2>Improved Documentation</h2>
<ul>
<li>Update documentation to reflect the new behavior of using the cache of locally
built wheels in hash-checking mode. (<code>[#11967](pypa/pip#11967) &lt;https://github.com/pypa/pip/issues/11967&gt;</code>_)</li>
</ul>
<h1>23.1 (2023-04-15)</h1>
<h2>Deprecations and Removals</h2>
<ul>
<li>Remove support for the deprecated <code>--install-options</code>. (<code>[#11358](pypa/pip#11358) &lt;https://github.com/pypa/pip/issues/11358&gt;</code>_)</li>
<li><code>--no-binary</code> does not imply <code>setup.py install</code> anymore. Instead a wheel will be
built locally and installed. (<code>[#11451](pypa/pip#11451) &lt;https://github.com/pypa/pip/issues/11451&gt;</code>_)</li>
<li><code>--no-binary</code> does not disable the cache of locally built wheels anymore. It only
means &quot;don't download wheels&quot;. (<code>[#11453](pypa/pip#11453) &lt;https://github.com/pypa/pip/issues/11453&gt;</code>_)</li>
<li>Deprecate <code>--build-option</code> and <code>--global-option</code>. Users are invited to switch to
<code>--config-settings</code>. (<code>[#11859](pypa/pip#11859) &lt;https://github.com/pypa/pip/issues/11859&gt;</code>_)</li>
<li>Using <code>--config-settings</code> with projects that don't have a <code>pyproject.toml</code> now prints
a deprecation warning. In the future the presence of config settings will automatically
enable the default build backend for legacy projects and pass the setttings to it. (<code>[#11915](pypa/pip#11915) &lt;https://github.com/pypa/pip/issues/11915&gt;</code>_)</li>
<li>Remove <code>setup.py install</code> fallback when building a wheel failed for projects without
<code>pyproject.toml</code>. (<code>[#8368](pypa/pip#8368) &lt;https://github.com/pypa/pip/issues/8368&gt;</code>_)</li>
<li>When the <code>wheel</code> package is not installed, pip now uses the default build backend
instead of <code>setup.py install</code> and <code>setup.py develop</code> for project without
<code>pyproject.toml</code>. (<code>[#8559](pypa/pip#8559) &lt;https://github.com/pypa/pip/issues/8559&gt;</code>_)</li>
</ul>

</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/pypa/pip/commit/3fe7e54fceac7a03bcb88ce26cfd0937acfe5e40"><code>3fe7e54</code></a> Bump for release</li>
<li><a href="https://github.com/pypa/pip/commit/bc7621aaf827a992a455fe5c2c4ec59cfc26186e"><code>bc7621a</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11997">#11997</a> from pfmoore/vendoring-setuptools</li>
<li><a href="https://github.com/pypa/pip/commit/cbc92fd6dd7e0bae4ec81b87521b5c27b0601be5"><code>cbc92fd</code></a> Upgrade setuptools to 67.7.2</li>
<li><a href="https://github.com/pypa/pip/commit/4428130fbe44259562280f0601f034bb8c43bef2"><code>4428130</code></a> Suppress pkg_resources deprecation warning</li>
<li><a href="https://github.com/pypa/pip/commit/f1a7a6f942b869ae3428dbf55dfc1ca756c78d94"><code>f1a7a6f</code></a> Upgrade setuptools to 67.6.1</li>
<li><a href="https://github.com/pypa/pip/commit/51afe45cda2854d810d9714e3891e256b1509737"><code>51afe45</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11992">#11992</a> from pfmoore/release/23.1.1</li>
<li><a href="https://github.com/pypa/pip/commit/5cbf00c49e2a6974d794534d8041cf370218e98d"><code>5cbf00c</code></a> Bump for development</li>
<li><a href="https://github.com/pypa/pip/commit/ee40d71817df8346af3d96051a298db8f22e52f1"><code>ee40d71</code></a> Bump for release</li>
<li><a href="https://github.com/pypa/pip/commit/d5a779d96c0460f49da23abe8b4f557ce80b0a70"><code>d5a779d</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11987">#11987</a> from pfmoore/revert_56e5fa3</li>
<li><a href="https://github.com/pypa/pip/commit/b64e74de42d0a6e4f3a81a06b7fd33eea00b7160"><code>b64e74d</code></a> Add a news file</li>
<li>Additional commits viewable in <a href="https://github.com/pypa/pip/compare/23.0.1...23.1.2">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pip&package-manager=pip&previous-version=23.0.1&new-version=23.1.2)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>
janEbert added a commit to janEbert/accelerate that referenced this issue Jul 5, 2023
Due to pip having deprecated `--global-option` and `--build-option`,
this will be highly relevant in the future (removal is planned for 23.3,
see pypa/pip#11859).
@webknjaz
Copy link
Member

@sbidoul does --config-settings get passed to all the packages? The deprecated --install-option used to be per-package and didn't leak into others: https://github.com/pypa/pip/pull/11858/files#diff-ae0a88ffece2e628ec4927675709082e92c646944a612c72432480c0e7dffb8dL768.

@sbidoul
Copy link
Member Author

sbidoul commented Jan 27, 2024

does --config-settings get passed to all the packages

@webknjaz according to #11941 and the linked comment there, it should not.

@sbidoul
Copy link
Member Author

sbidoul commented Jan 27, 2024

Postponing this to no earlier than pip 24.2.

@indygreg
Copy link

A few days after I wrote my long comment in October, setuptools merged pypa/setuptools#4079 (first shipped in 69.0.0) which only passes --config-settings=--build-option to the bdist_wheel command. This effectively broke workflows. I'm pretty sure it completely broke --config-settings for editable installs, as my CI using pip install --config-settings='--build-option=...' -e . breaks on setuptools >= 69.0.0.

There's various discussion of this at pypa/setuptools#4218, pypa/setuptools#4217, pypa/setuptools#2491, and pypa/setuptools#4083.

setuptools still doesn't have a documented nor stable solution for threading --config-settings through to their PEP 517 build backend. And since I last commented they actually made it harder to pass custom build options.

I want to reaffirm my earlier position that it still feels premature to deprecate anything here until setuptools has a stable, documented solution for supporting dynamic configuration via --config-settings.

@xKRISTOFx
Copy link

But if you stop supporting this, how will it be possible to set compiler to use while installing package without wheel. Because since 3.12 this solution is also not valid since distutils are now inside setuptools

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
project: setuptools Related to setuptools type: deprecation Related to deprecation / removal.
Projects
None yet
Development

Successfully merging a pull request may close this issue.