add keyboard support for duckboard

keyboards/doodboard/duckboard/config.h

@@ -0,0 +1,57 @@
+/* Copyright 2020 doodboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xFF44
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    doodboard
+#define PRODUCT         duckboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 5
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
+#define MATRIX_COL_PINS { F7, B1, B3, B2, B6 }
+#define UNUSED_PINS
+
+#define ENCODERS_PAD_A { F5 }
+#define ENCODERS_PAD_B { F6 }
+#define ENCODER_RESOLUTION 2
+
+/* media key slowdown for windows */
+#define TAP_CODE_DELAY 20
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+
+#ifdef RGBLIGHT_ENABLE
+#define RGBLED_NUM 8    // Number of LEDs
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5

keyboards/doodboard/duckboard/duckboard.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 doodboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "duckboard.h"

keyboards/doodboard/duckboard/duckboard.h

@@ -0,0 +1,34 @@
+/* Copyright 2020 doodboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+         K01, K02, K03, K04, \
+         K11, K12, K13,      \
+         K21, K22, K23, K24, \
+         K31, K32, K33,      \
+    K40, K41, K42, K43, K44  \
+) { \
+    { KC_NO, K01,   K02,   K03,   K04 },   \
+    { KC_NO, K11,   K12,   K13,   KC_NO }, \
+    { KC_NO, K21,   K22,   K23,   K24 },   \
+    { KC_NO, K31,   K32,   K33,   KC_NO }, \
+    { K40,   K41,   K42,   K43,   K44 }    \
+}

keyboards/doodboard/duckboard/info.json

@@ -0,0 +1,36 @@
+{
+    "keyboard_name": "duckboard",
+    "url": "",
+    "maintainer": "doodboard",
+    "width": 5,
+    "height": 5,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"x": 1, "y": 0},
+                {"x": 2, "y": 0},
+                {"x": 3, "y": 0},
+                {"x": 4, "y": 0},
+
+                {"x": 1, "y": 1},
+                {"x": 2, "y": 1},
+                {"x": 3, "y": 1},
+
+                {"x": 1, "y": 2},
+                {"x": 2, "y": 2},
+                {"x": 3, "y": 2},
+                {"x": 4, "y": 2},
+
+                {"x": 1, "y": 3},
+                {"x": 2, "y": 3},
+                {"x": 3, "y": 3},
+
+                {"x": 0, "y": 4},
+                {"x": 1, "y": 4},
+                {"x": 2, "y": 4},
+                {"x": 3, "y": 4},
+                {"x": 4, "y": 4}
+            ]
+        }
+    }
+}

keyboards/doodboard/duckboard/keymaps/default/keymap.c

@@ -0,0 +1,118 @@
+/* Copyright 2020 doodboard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT(
+                 TG(1),   KC_PSLS, KC_PAST, KC_PMNS,
+                 KC_P7,   KC_P8,   KC_P9,
+                 KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+                 KC_P1,   KC_P2,   KC_P3,
+        KC_BSPC, KC_MUTE, KC_P0,   KC_PDOT, KC_PENT),
+	[1] = LAYOUT(
+		         TG(1),   KC_TRNS, KC_TRNS, KC_TRNS,
+		         KC_HOME, KC_UP,   KC_PGUP,
+		         KC_LEFT, KC_TRNS, KC_RGHT, KC_TRNS,
+		         KC_END,  KC_DOWN, KC_PGDN,
+		TG(2),   KC_TRNS, KC_INS,  KC_DEL,  KC_TRNS),
+	[2] = LAYOUT(
+		         KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS,
+		         RGB_HUI, RGB_SAI, RGB_VAI,
+		         RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS,
+		         KC_TRNS, KC_TRNS, KC_TRNS,
+		TG(2),   RESET,   KC_TRNS, KC_TRNS, KC_TRNS),
+};
+
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) { /* First encoder */
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+}
+}
+
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; }
+
+
+// WPM-responsive animation stuff here
+#define IDLE_FRAMES 2
+#define IDLE_SPEED 40 // below this wpm value your animation will idle
+
+#define ANIM_FRAME_DURATION 200 // how long each frame lasts in ms
+// #define SLEEP_TIMER 60000 // should sleep after this period of 0 wpm, needs fixing
+#define ANIM_SIZE 636 // number of bytes in array, minimize for adequate firmware size, max is 1024
+
+uint32_t anim_timer = 0;
+uint32_t anim_sleep = 0;
+uint8_t current_idle_frame = 0;
+
+// Credit to u/Pop-X- for the initial code. You can find his commit here https://github.com/qmk/qmk_firmware/pull/9264/files#diff-303f6e3a7a5ee54be0a9a13630842956R196-R333.
+static void render_anim(void) {
+    static const char PROGMEM idle[IDLE_FRAMES][ANIM_SIZE] = {
+        {
+        0,  0,192,192,192,192,192,192,192,248,248, 30, 30,254,254,248,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  3,  3,  3,  3,  3,255,255,255,255,255,255,255,128,128,128,128,128,128,128,128,128,128,128,128,128,128,128,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,127,127,255,255,255,255,255,159,159,135,135,129,129,129, 97, 97, 25, 25,  7,  7,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1, 97, 97,127,  1,  1, 97, 97,127,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0
+        },
+        {
+        0,  0,128,128,128,128,128,128,128,240,240, 60, 60,252,252,240,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  7,  7,  7,  7,  7,255,255,254,254,255,255,255,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,255,255,255,255,255,255,255, 63, 63, 15, 15,  3,  3,  3,195,195, 51, 51, 15, 15,  3,  3,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  3,  3, 99, 99,127,  3,  3, 99, 99,127,  3,  3,  0,  0,  0,  0,  0,  0,  0,  0,  0
+        }
+    };
+
+    //assumes 1 frame prep stage
+    void animation_phase(void) {
+            current_idle_frame = (current_idle_frame + 1) % IDLE_FRAMES;
+            oled_write_raw_P(idle[abs((IDLE_FRAMES-1)-current_idle_frame)], ANIM_SIZE);
+    }
+
+        if(timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) {
+            anim_timer = timer_read32();
+            animation_phase();
+        }
+    }
+
+void oled_task_user(void) {
+        render_anim();
+        oled_set_cursor(0,6);
+        oled_write_P(PSTR("DUCK\nBOARD\n"), false);
+    oled_write_P(PSTR("-----\n"), false);
+    // Host Keyboard Layer Status
+    oled_write_P(PSTR("MODE\n"), false);
+    oled_write_P(PSTR("\n"), false);
+
+    switch (get_highest_layer(layer_state)) {
+        case 0:
+            oled_write_P(PSTR("BASE\n"), false);
+            break;
+        case 1:
+            oled_write_P(PSTR("FUNC\n"), false);
+            break;
+        case 2:
+            oled_write_P(PSTR("RGB\n"), false);
+            break;
+    }
+}
+#endif
+
+void keyboard_post_init_user(void) {
+  //Customise these values to debug
+  //debug_enable=true;
+  //debug_matrix=true;
+  //debug_keyboard=true;
+  //debug_mouse=true;
+}

keyboards/doodboard/duckboard/readme.md

@@ -0,0 +1,17 @@
+# duckboard
+
+An 18-key numpad with rotary encoder and OLED support. 
+
+* Keyboard Maintainer: [doodboard](https://github.com/doodboard)
+* Hardware Supported: duckboard PCB
+* Hardware Availability: Private Group Buy
+
+Make example for this keyboard (after setting up your build environment):
+
+    make doodboard/duckboard:default
+
+Flashing example for this keyboard:
+
+    make doodboard/duckboard:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/doodboard/duckboard/rules.mk

@@ -0,0 +1,25 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = yes        # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+
+ENCODER_ENABLE = yes
+OLED_DRIVER_ENABLE = yes