Add no_std Xtensa targets support

[SergioGasquez]

Adds no_std Xtensa targets. This enables using Rust on ESP32, ESP32-S2 and ESP32-S3 chips.

Tier 3 policy:

A tier 3 target must have a designated developer or developers (the "target maintainers") on record to be CCed when issues arise regarding the target. (The mechanism to track and CC such developers may evolve over time.)

@MabezDev and I (@SergioGasquez) will maintain the targets.

Targets must use naming consistent with any existing targets; for instance, a target for the same CPU or OS as an existing Rust target should use the same name for that CPU or OS. Targets should normally use the same names and naming conventions as used elsewhere in the broader ecosystem beyond Rust (such as in other toolchains), unless they have a very good reason to diverge. Changing the name of a target can be highly disruptive, especially once the target reaches a higher tier, so getting the name right is important even for a tier 3 target.

The target triple is consistent with other targets.

Target names should not introduce undue confusion or ambiguity unless absolutely necessary to maintain ecosystem compatibility. For example, if the name of the target makes people extremely likely to form incorrect beliefs about what it targets, the name should be changed or augmented to disambiguate it.
If possible, use only letters, numbers, dashes and underscores for the name. Periods (.) are known to cause issues in Cargo.

We follow the same naming convention as other targets.

Tier 3 targets may have unusual requirements to build or use, but must not create legal issues or impose onerous legal terms for the Rust project or for Rust developers or users.

The target does not introduce any legal issues.

The target must not introduce license incompatibilities.

There are no license incompatibilities

Anything added to the Rust repository must be under the standard Rust license (MIT OR Apache-2.0).

Everything added is under that licenses

The target must not cause the Rust tools or libraries built for any other host (even when supporting cross-compilation to the target) to depend on any new dependency less permissive than the Rust licensing policy. This applies whether the dependency is a Rust crate that would require adding new license exceptions (as specified by the tidy tool in the rust-lang/rust repository), or whether the dependency is a native library or binary. In other words, the introduction of the target must not cause a user installing or running a version of Rust or the Rust tools to be subject to any new license requirements.

Requirements are not changed for any other target.

Compiling, linking, and emitting functional binaries, libraries, or other code for the target (whether hosted on the target itself or cross-compiling from another target) must not depend on proprietary (non-FOSS) libraries. Host tools built for the target itself may depend on the ordinary runtime libraries supplied by the platform and commonly used by other applications built for the target, but those libraries must not be required for code generation for the target; cross-compilation to the target must not require such libraries at all. For instance, rustc built for the target may depend on a common proprietary C runtime library or console output library, but must not depend on a proprietary code generation library or code optimization library. Rust's license permits such combinations, but the Rust project has no interest in maintaining such combinations within the scope of Rust itself, even at tier 3.

The linker used by the targets is the GCC linker from the GCC toolchain cross-compiled for Xtensa. GNU GPL.

"onerous" here is an intentionally subjective term. At a minimum, "onerous" legal/licensing terms include but are not limited to: non-disclosure requirements, non-compete requirements, contributor license agreements (CLAs) or equivalent, "non-commercial"/"research-only"/etc terms, requirements conditional on the employer or employment of any particular Rust developers, revocable terms, any requirements that create liability for the Rust project or its developers or users, or any requirements that adversely affect the livelihood or prospects of the Rust project or its developers or users.

No such terms exist for this target

Neither this policy nor any decisions made regarding targets shall create any binding agreement or estoppel by any party. If any member of an approving Rust team serves as one of the maintainers of a target, or has any legal or employment requirement (explicit or implicit) that might affect their decisions regarding a target, they must recuse themselves from any approval decisions regarding the target's tier status, though they may otherwise participate in discussions.

This requirement does not prevent part or all of this policy from being cited in an explicit contract or work agreement (e.g. to implement or maintain support for a target). This requirement exists to ensure that a developer or team responsible for reviewing and approving a target does not face any legal threats or obligations that would prevent them from freely exercising their judgment in such approval, even if such judgment involves subjective matters or goes beyond the letter of these requirements.

Understood

Tier 3 targets should attempt to implement as much of the standard libraries as possible and appropriate (core for most targets, alloc for targets that can support dynamic memory allocation, std for targets with an operating system or equivalent layer of system-provided functionality), but may leave some code unimplemented (either unavailable or stubbed out as appropriate), whether because the target makes it impossible to implement or challenging to implement. The authors of pull requests are not obligated to avoid calling any portions of the standard library on the basis of a tier 3 target not implementing those portions.

The target already implements core.

The target must provide documentation for the Rust community explaining how to build for the target, using cross-compilation if possible. If the target supports running binaries, or running tests (even if they do not pass), the documentation must explain how to run such binaries or tests for the target, using emulation if possible or dedicated hardware if necessary.

Here is how to build for the target https://docs.esp-rs.org/book/installation/riscv-and-xtensa.html and it also covers how to run binaries on the target.

Tier 3 targets must not impose burden on the authors of pull requests, or other developers in the community, to maintain the target. In particular, do not post comments (automated or manual) on a PR that derail or suggest a block on the PR based on a tier 3 target. Do not send automated messages or notifications (via any medium, including via @) to a PR author or others involved with a PR regarding a tier 3 target, unless they have opted into such messages.

Backlinks such as those generated by the issue/PR tracker when linking to an issue or PR are not considered a violation of this policy, within reason. However, such messages (even on a separate repository) must not generate notifications to anyone involved with a PR who has not requested such notifications.

Understood

Patches adding or updating tier 3 targets must not break any existing tier 2 or tier 1 target, and must not knowingly break another tier 3 target without approval of either the compiler team or the maintainers of the other tier 3 target.

In particular, this may come up when working on closely related targets, such as variations of the same architecture with different features. Avoid introducing unconditional uses of features that another variation of the target may not have; use conditional compilation or runtime detection, as appropriate, to let each target run code supported by that target.

No other targets should be affected

Tier 3 targets must be able to produce assembly using at least one of rustc's supported backends from any host target.

It can produce assembly, but it requires a custom LLVM with Xtensa support (https://github.com/espressif/llvm-project/). The patches are trying to be upstreamed (espressif/llvm-project#4)

[rustbot]

r? @davidtwco

rustbot has assigned @davidtwco.
They will have a look at your PR within the next two weeks and either review your PR or reassign to another reviewer.

Use r? to explicitly pick a reviewer

[rustbot]

These commits modify compiler targets.
(See the Target Tier Policy.)

Some changes occurred in src/doc/rustc/src/platform-support

cc @Nilstrieb

[Kobzol]

By the way, you can try to run the x86_64-gnu-llvm-17 CI job locally using

$ DEPLOY=1 ENABLE_GCC_CODEGEN=1 src/ci/docker/run.sh x86_64-gnu-llvm-17

[Kobzol]

I think that you should just run python3 x.py test --bless tests/ui and then commit the result.

[rustbot]

Some changes occurred in tests/ui/check-cfg

cc @Urgau

[Kobzol]

Hmm. It looks like it's a problem that rustc cannot even create a TargetMachine for this target, apparently LLVM does not know about it at all.

The existing csky-unknown-linux-gnuabiv2hf target, which is ignored in some tests, does not have a rustup component, however apparently LLVM does understand it. It seems like our tests aren't currently prepared for a situation where LLVM does not even know about the target (?).

@davidtwco might know more.

[davidtwco]

This PR changes how LLVM is built. Consider updating src/bootstrap/download-ci-llvm-stamp.

I think you'll need to do this, then r=me.

[Kobzol]

@bors r=davidtwco rollup=never

(I assume that the authors of this PR don't have merge rights)

[bors]

📌 Commit 9e58c5e has been approved by davidtwco

It is now in the queue for this repository.

[bors]

⌛ Testing commit 9e58c5e with merge 0285dab...

[bors]

☀️ Test successful - checks-actions
Approved by: davidtwco
Pushing 0285dab to master...

[rust-timer]

Finished benchmarking commit (0285dab): comparison URL.

Overall result: no relevant changes - no action needed

@rustbot label: -perf-regression

Instruction count

This benchmark run did not return any relevant results for this metric.

Max RSS (memory usage)

This benchmark run did not return any relevant results for this metric.

Cycles

Results (primary -2.3%, secondary -3.7%)

This is a less reliable metric that may be of interest but was not used to determine the overall result at the top of this comment.

	mean	range	count
Regressions ❌ (primary)	-	-	0
Regressions ❌ (secondary)	-	-	0
Improvements ✅ (primary)	-2.3%	[-2.3%, -2.3%]	1
Improvements ✅ (secondary)	-3.7%	[-3.7%, -3.7%]	1
All ❌✅ (primary)	-2.3%	[-2.3%, -2.3%]	1

Binary size

This benchmark run did not return any relevant results for this metric.

Bootstrap: 676.723s -> 675.959s (-0.11%)
Artifact size: 319.98 MiB -> 320.08 MiB (0.03%)

[taiki-e]

This seem to be wrong? I got the following error when building for this target:

  error: data-layout for target `xtensa-esp32-none-elf`, `e-m:e-p:32:32-v1:8:8-i64:64-i128:128-n32`, differs from LLVM target's `xtensa-none-elf` default layout, `e-m:e-p:32:32-i8:8:32-i16:16:32-i64:64-n32`

https://github.com/taiki-e/portable-atomic/actions/runs/9492602960/job/26160155007#step:6:1583

[MabezDev]

Rust is not currently using a new enough LLVM to include the patches to generate code (discussed here: #125141 (comment)), so for now, you still need the esp toolchain in your CI. I think by switching to LLVM 18, or latest LLVM 19 we should be able to build some basic binaries.

[Zalathar]

This seems to have broken x test tests/run-make/print-target-list for me:

--- stderr -------------------------------
warning: MIPS-I support is experimental
error: could not create LLVM TargetMachine for triple: xtensa-none-elf: No available targets are compatible with triple "xtensa-none-unknown-elf"

error: could not create LLVM TargetMachine for triple: xtensa-none-elf: No available targets are compatible with triple "xtensa-none-unknown-elf"

error: could not create LLVM TargetMachine for triple: xtensa-none-elf: No available targets are compatible with triple "xtensa-none-unknown-elf"

make: *** [all] Error 1
------------------------------------------

[Zalathar]

I wonder if this is because LLVM needs to be rebuilt, and isn't doing so automatically.

I'll try to force an LLVM rebuild to see if that helps.

[Kobzol]

There is a new experimental target that needs to be enabled. If you're building LLVM yourself, it will indeed need to be rebuilt.

[Zalathar]

Yeah, that did the trick.

Manually rebuilding shouldn't have been necessary, but that's probably more of a bootstrap bug.