syncer: don't skip jobs from same event when comparing table checkpoi…

…nt (pingcap#1752)

syncer/checkpoint.go

@@ -198,8 +198,8 @@ type CheckPoint interface {
 	// DeleteSchemaPoint deletes checkpoint for specified schema
 	DeleteSchemaPoint(tctx *tcontext.Context, sourceSchema string) error
 
-	// IsNewerTablePoint checks whether job's checkpoint is newer than previous saved checkpoint
-	IsNewerTablePoint(sourceSchema, sourceTable string, point binlog.Location, gte bool) bool
+	// IsOlderThanTablePoint checks whether job's checkpoint is older than previous saved checkpoint
+	IsOlderThanTablePoint(sourceSchema, sourceTable string, point binlog.Location, useLE bool) bool
 
 	// SaveGlobalPoint saves the global binlog stream's checkpoint
 	// corresponding to Meta.Save
@@ -443,34 +443,32 @@ func (cp *RemoteCheckPoint) DeleteSchemaPoint(tctx *tcontext.Context, sourceSche
 	return nil
 }
 
-// IsNewerTablePoint implements CheckPoint.IsNewerTablePoint.
-// gte means greater than or equal, gte should judge by EnableGTID and the event type
-// - when enable GTID and binlog is DML, go-mysql will only update GTID set in a XID event after the rows event, for example, the binlog events are:
-//   - Query event, location is gset1
-//   - Rows event, location is gset1
+// IsOlderThanTablePoint implements CheckPoint.IsOlderThanTablePoint.
+// For GTID replication, go-mysql will only update GTID set in a XID event after the rows event, for example, the binlog events are:
+//   - Query event e1, location is gset1
+//   - Rows event e2, location is gset1
 //   - XID event, location is gset2
-//   after syncer handle query event, will save table point with gset1, and when handle rows event, will compare the rows's location with table checkpoint's location in `IsNewerTablePoint`, and these two location have same gset, so we should use `>=` to compare location in this case.
-// - when enable GTID and binlog is DDL, different DDL have different GTID set, so if GTID set is euqal, it is a old table point, should use `>` to compare location in this case.
-// - when not enable GTID, just compare the position, and only when grater than the old point is newer table point, should use `>` to compare location is this case.
-func (cp *RemoteCheckPoint) IsNewerTablePoint(sourceSchema, sourceTable string, location binlog.Location, gte bool) bool {
+// We should note that e1 is not older than e2
+// For binlog position replication, currently DM will split rows changes of an event to jobs, so some job may has save position.
+// if useLE is true, we use less than or equal.
+func (cp *RemoteCheckPoint) IsOlderThanTablePoint(sourceSchema, sourceTable string, location binlog.Location, useLE bool) bool {
 	cp.RLock()
 	defer cp.RUnlock()
 	mSchema, ok := cp.points[sourceSchema]
 	if !ok {
-		return true
+		return false
 	}
 	point, ok := mSchema[sourceTable]
 	if !ok {
-		return true
+		return false
 	}
 	oldLocation := point.MySQLLocation()
 	cp.logCtx.L().Debug("compare table location whether is newer", zap.Stringer("location", location), zap.Stringer("old location", oldLocation))
 
-	if gte {
-		return binlog.CompareLocation(location, oldLocation, cp.cfg.EnableGTID) >= 0
+	if useLE {
+		return binlog.CompareLocation(location, oldLocation, cp.cfg.EnableGTID) <= 0
 	}
-
-	return binlog.CompareLocation(location, oldLocation, cp.cfg.EnableGTID) > 0
+	return binlog.CompareLocation(location, oldLocation, cp.cfg.EnableGTID) < 0
 }
 
 // SaveGlobalPoint implements CheckPoint.SaveGlobalPoint.

syncer/checkpoint_test.go

@@ -340,23 +340,23 @@ func (s *testCheckpointSuite) testTableCheckPoint(c *C, cp CheckPoint) {
 	)
 
 	// not exist
-	newer := cp.IsNewerTablePoint(schema, table, binlog.Location{Position: pos1}, false)
-	c.Assert(newer, IsTrue)
+	older := cp.IsOlderThanTablePoint(schema, table, binlog.Location{Position: pos1}, false)
+	c.Assert(older, IsFalse)
 
 	// save
 	cp.SaveTablePoint(schema, table, binlog.Location{Position: pos2}, nil)
-	newer = cp.IsNewerTablePoint(schema, table, binlog.Location{Position: pos1}, false)
-	c.Assert(newer, IsFalse)
+	older = cp.IsOlderThanTablePoint(schema, table, binlog.Location{Position: pos1}, false)
+	c.Assert(older, IsTrue)
 
 	// rollback, to min
 	cp.Rollback(s.tracker)
-	newer = cp.IsNewerTablePoint(schema, table, binlog.Location{Position: pos1}, false)
-	c.Assert(newer, IsTrue)
+	older = cp.IsOlderThanTablePoint(schema, table, binlog.Location{Position: pos1}, false)
+	c.Assert(older, IsFalse)
 
 	// save again
 	cp.SaveTablePoint(schema, table, binlog.Location{Position: pos2}, nil)
-	newer = cp.IsNewerTablePoint(schema, table, binlog.Location{Position: pos1}, false)
-	c.Assert(newer, IsFalse)
+	older = cp.IsOlderThanTablePoint(schema, table, binlog.Location{Position: pos1}, false)
+	c.Assert(older, IsTrue)
 
 	// flush + rollback
 	s.mock.ExpectBegin()
@@ -365,13 +365,13 @@ func (s *testCheckpointSuite) testTableCheckPoint(c *C, cp CheckPoint) {
 	err = cp.FlushPointsExcept(tctx, nil, nil, nil)
 	c.Assert(err, IsNil)
 	cp.Rollback(s.tracker)
-	newer = cp.IsNewerTablePoint(schema, table, binlog.Location{Position: pos1}, false)
-	c.Assert(newer, IsFalse)
+	older = cp.IsOlderThanTablePoint(schema, table, binlog.Location{Position: pos1}, false)
+	c.Assert(older, IsTrue)
 
 	// save
 	cp.SaveTablePoint(schema, table, binlog.Location{Position: pos2}, nil)
-	newer = cp.IsNewerTablePoint(schema, table, binlog.Location{Position: pos1}, false)
-	c.Assert(newer, IsFalse)
+	older = cp.IsOlderThanTablePoint(schema, table, binlog.Location{Position: pos1}, false)
+	c.Assert(older, IsTrue)
 
 	// delete
 	s.mock.ExpectBegin()
@@ -431,8 +431,8 @@ func (s *testCheckpointSuite) testTableCheckPoint(c *C, cp CheckPoint) {
 	s.mock.ExpectCommit()
 	err = cp.Clear(tctx)
 	c.Assert(err, IsNil)
-	newer = cp.IsNewerTablePoint(schema, table, binlog.Location{Position: pos1}, false)
-	c.Assert(newer, IsTrue)
+	older = cp.IsOlderThanTablePoint(schema, table, binlog.Location{Position: pos1}, false)
+	c.Assert(older, IsFalse)
 
 	// test save table point less than global point
 	func() {
@@ -452,8 +452,8 @@ func (s *testCheckpointSuite) testTableCheckPoint(c *C, cp CheckPoint) {
 	err = cp.FlushPointsExcept(tctx, [][]string{{schema, table}}, nil, nil)
 	c.Assert(err, IsNil)
 	cp.Rollback(s.tracker)
-	newer = cp.IsNewerTablePoint(schema, table, binlog.Location{Position: pos1}, false)
-	c.Assert(newer, IsTrue)
+	older = cp.IsOlderThanTablePoint(schema, table, binlog.Location{Position: pos1}, false)
+	c.Assert(older, IsFalse)
 
 	s.mock.ExpectBegin()
 	s.mock.ExpectExec(clearCheckPointSQL).WithArgs(cpid).WillReturnResult(sqlmock.NewResult(0, 1))

syncer/syncer.go

@@ -797,7 +797,34 @@ func (s *Syncer) saveTablePoint(db, table string, location binlog.Location) {
 	s.checkpoint.SaveTablePoint(db, table, location, ti)
 }
 
+// only used in tests.
+var (
+	lastPos        mysql.Position
+	lastPosNum     int
+	waitJobsDone   bool
+	failExecuteSQL bool
+	failOnce       atomic.Bool
+)
+
 func (s *Syncer) addJob(job *job) error {
+	failpoint.Inject("countJobFromOneEvent", func() {
+		if job.currentLocation.Position.Compare(lastPos) == 0 {
+			lastPosNum++
+		} else {
+			lastPos = job.currentLocation.Position
+			lastPosNum = 1
+		}
+		// trigger a flush after see one job
+		if lastPosNum == 1 {
+			waitJobsDone = true
+			s.tctx.L().Info("meet the first job of an event", zap.Any("binlog position", lastPos))
+		}
+		// mock a execution error after see two jobs.
+		if lastPosNum == 2 {
+			failExecuteSQL = true
+			s.tctx.L().Info("meet the second job of an event", zap.Any("binlog position", lastPos))
+		}
+	})
 	var queueBucket int
 	switch job.tp {
 	case xid:
@@ -838,6 +865,13 @@ func (s *Syncer) addJob(job *job) error {
 
 	// nolint:ifshort
 	wait := s.checkWait(job)
+	failpoint.Inject("flushFirstJobOfEvent", func() {
+		if waitJobsDone {
+			s.tctx.L().Info("trigger flushFirstJobOfEvent")
+			waitJobsDone = false
+			wait = true
+		}
+	})
 	if wait {
 		s.jobWg.Wait()
 		s.c.reset()
@@ -1122,6 +1156,13 @@ func (s *Syncer) syncDML(tctx *tcontext.Context, queueBucket string, db *DBConn,
 			return 0, nil
 		}
 
+		failpoint.Inject("failSecondJobOfEvent", func() {
+			if failExecuteSQL && failOnce.CAS(false, true) {
+				s.tctx.L().Info("trigger failSecondJobOfEvent")
+				failpoint.Return(0, errors.New("failSecondJobOfEvent"))
+			}
+		})
+
 		select {
 		case <-tctx.Ctx.Done():
 			// do not execute queries anymore, because they should be failed with a done context.
@@ -1210,13 +1251,13 @@ func (s *Syncer) Run(ctx context.Context) (err error) {
 
 	var (
 		flushCheckpoint bool
-		cleanDumpFile   = s.cfg.CleanDumpFile
+		cleanDumpFile   = s.cfg.CleanDumpFile && fresh
 	)
 	flushCheckpoint, err = s.adjustGlobalPointGTID(tctx)
 	if err != nil {
 		return err
 	}
-	if s.cfg.Mode == config.ModeAll {
+	if s.cfg.Mode == config.ModeAll && fresh {
 		flushCheckpoint = true
 		err = s.loadTableStructureFromDump(ctx)
 		if err != nil {
@@ -1742,7 +1783,7 @@ func (s *Syncer) handleRowsEvent(ev *replication.RowsEvent, ec eventContext) err
 	}
 
 	// DML position before table checkpoint, ignore it
-	if !s.checkpoint.IsNewerTablePoint(originSchema, originTable, *ec.currentLocation, s.cfg.EnableGTID) {
+	if s.checkpoint.IsOlderThanTablePoint(originSchema, originTable, *ec.currentLocation, false) {
 		ec.tctx.L().Debug("ignore obsolete event that is old than table checkpoint", zap.String("event", "row"), log.WrapStringerField("location", ec.currentLocation), zap.String("origin schema", originSchema), zap.String("origin table", originTable))
 		return nil
 	}
@@ -1983,9 +2024,9 @@ func (s *Syncer) handleQueryEvent(ev *replication.QueryEvent, ec eventContext, o
 			continue
 		}
 
-		// for DDL, we wait it to be executed, so we can check if event is newer in this syncer's main process goroutine
-		// ignore obsolete DDL here can avoid to try-sync again for already synced DDLs
-		if !s.checkpoint.IsNewerTablePoint(tableNames[0][0].Schema, tableNames[0][0].Name, *ec.currentLocation, false) {
+		// DDL is sequentially synchronized in this syncer's main process goroutine
+		// ignore DDL that is older or same as table checkpoint, to try-sync again for already synced DDLs
+		if s.checkpoint.IsOlderThanTablePoint(tableNames[0][0].Schema, tableNames[0][0].Name, *ec.currentLocation, true) {
 			ec.tctx.L().Info("ignore obsolete DDL", zap.String("event", "query"), zap.String("statement", sql), log.WrapStringerField("location", ec.currentLocation))
 			continue
 		}

tests/all_mode/data/db1.increment3.sql

@@ -0,0 +1,3 @@
+use all_mode;
+insert into t1 (id, name) values (10, '10'), (20, '20');
+insert into t1 (id, name) values (30, '30');

tests/all_mode/data/db2.increment3.sql

@@ -0,0 +1,3 @@
+use all_mode;
+insert into t2 (id, name) values (10, '10'), (20, '20');
+insert into t2 (id, name) values (30, '30');

tests/all_mode/run.sh

@@ -263,11 +263,60 @@ function test_stop_task_before_checkpoint() {
 	export GO_FAILPOINTS=''
 }
 
+function test_fail_job_between_event() {
+	run_sql_file $cur/data/db1.prepare.sql $MYSQL_HOST1 $MYSQL_PORT1 $MYSQL_PASSWORD1
+	check_contains 'Query OK, 2 rows affected'
+	run_sql_file $cur/data/db2.prepare.sql $MYSQL_HOST2 $MYSQL_PORT2 $MYSQL_PASSWORD2
+	check_contains 'Query OK, 3 rows affected'
+
+	# start DM worker and master
+	run_dm_master $WORK_DIR/master $MASTER_PORT $cur/conf/dm-master.toml
+	check_rpc_alive $cur/../bin/check_master_online 127.0.0.1:$MASTER_PORT
+	check_metric $MASTER_PORT 'start_leader_counter' 3 0 2
+
+	inject_points=(
+		"github.com/pingcap/dm/dm/worker/TaskCheckInterval=return(\"500ms\")"
+		"github.com/pingcap/dm/syncer/countJobFromOneEvent=return()"
+		"github.com/pingcap/dm/syncer/flushFirstJobOfEvent=return()"
+		"github.com/pingcap/dm/syncer/failSecondJobOfEvent=return()"
+	)
+	export GO_FAILPOINTS="$(join_string \; ${inject_points[@]})"
+	run_dm_worker $WORK_DIR/worker1 $WORKER1_PORT $cur/conf/dm-worker1.toml
+	check_rpc_alive $cur/../bin/check_worker_online 127.0.0.1:$WORKER1_PORT
+	run_dm_worker $WORK_DIR/worker2 $WORKER2_PORT $cur/conf/dm-worker2.toml
+	check_rpc_alive $cur/../bin/check_worker_online 127.0.0.1:$WORKER2_PORT
+
+	# operate mysql config to worker
+	cp $cur/conf/source1.yaml $WORK_DIR/source1.yaml
+	cp $cur/conf/source2.yaml $WORK_DIR/source2.yaml
+	sed -i "/relay-binlog-name/i\relay-dir: $WORK_DIR/worker1/relay_log" $WORK_DIR/source1.yaml
+	sed -i "s/enable-gtid: true/enable-gtid: false/g" $WORK_DIR/source1.yaml
+	sed -i "/relay-binlog-name/i\relay-dir: $WORK_DIR/worker2/relay_log" $WORK_DIR/source2.yaml
+	dmctl_operate_source create $WORK_DIR/source1.yaml $SOURCE_ID1
+	dmctl_operate_source create $WORK_DIR/source2.yaml $SOURCE_ID2
+
+	dmctl_start_task "$cur/conf/dm-task.yaml" "--remove-meta"
+
+	run_sql_file $cur/data/db1.increment3.sql $MYSQL_HOST1 $MYSQL_PORT1 $MYSQL_PASSWORD1
+	run_sql_file $cur/data/db2.increment3.sql $MYSQL_HOST2 $MYSQL_PORT2 $MYSQL_PASSWORD2
+	check_log_contain_with_retry "failSecondJobOfEvent" $WORK_DIR/worker1/log/dm-worker.log
+	check_log_contain_with_retry "failSecondJobOfEvent" $WORK_DIR/worker2/log/dm-worker.log
+	run_dm_ctl_with_retry $WORK_DIR "127.0.0.1:$MASTER_PORT" \
+		"query-status test" \
+		"\"result\": true" 3
+	check_sync_diff $WORK_DIR $cur/conf/diff_config.toml
+
+	cleanup_data all_mode
+	cleanup_process $*
+
+	export GO_FAILPOINTS=''
+}
+
 function run() {
 	run_sql_both_source "SET @@GLOBAL.SQL_MODE='ANSI_QUOTES,NO_AUTO_VALUE_ON_ZERO'"
 	run_sql_source1 "SET @@global.time_zone = '+01:00';"
 	run_sql_source2 "SET @@global.time_zone = '+02:00';"
-
+	test_fail_job_between_event
 	test_syncer_metrics
 	test_session_config
 	test_query_timeout