Analog Tone Matrix, lots of fun and no profit
-
Updated
Aug 6, 2017 - KiCad Layout
Analog Tone Matrix, lots of fun and no profit
Developed a device using Arduino which can calculate object’s revolving speed.
This project presents a 10Gb/s transceiver design using 65nm CMOS process, based on a 10GBASE-KR standard.
This repository contains NgSpice netlists for various lab assignments and an analog electronics project which is a part of the academic curriculum.The project involves simulating and building an audio amplifier circuit.
This project is about building a high FOM 2.4 GHz LNA for Bluetooth Low-Energy (BLE) Standards, using 45nm CMOS technology.
This project shows the design of two 4-bit current steering DACs, based on Binary and Segmented architectures at VDD=1.8V supply, using high-swing cascode current mirror structures for the current source arrays.
This project shows how to design a clock bootstrapped circuit to improve the nonlinearity of the switch used in Track & Hold circuit. A comparison is done between several topologies, showing the ENOB, SNR, & SFDR achieved in each case.
Enhanced defect detection probability and feasibility by using Phase information on the GMR output signal
50Vpp adjustable reverse sawtooth generator using basic components.
This project shows the design process of the main blocks of a typical RX frontend system.
Primitive device approximation, a machine learning extension for the PREDICT Toolbox.
This repository contains the files (schematic, test bench, simulation results) from the course Mixed-Signal Design(undergrad)
This project is about designing a 1.5 bit stage Pipeline ADC & the OpAmp required for its MDAC.
Using the MSP432 development board alongside analog circuits to decramble in real time an unknown, scrambled message and play it on a speaker.
DEPRECATED. Use circus instead
A 2 stage CMOS OTA with Differential amplifier with active load as the first stage followed by Common Source stage using Cadence
Record down how to install the open-source tools and PDK on Ubuntu OS for analog IC design
unipolar dummy load testing utility
Add a description, image, and links to the analog-design topic page so that developers can more easily learn about it.
To associate your repository with the analog-design topic, visit your repo's landing page and select "manage topics."