Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Add rtc-pcf2127 as a module in the kernel config #323

Open
wants to merge 3,981 commits into
base: master
Choose a base branch
from
Open

Add rtc-pcf2127 as a module in the kernel config #323

wants to merge 3,981 commits into from

Conversation

paulcrawford
Copy link

I, and I assume many others, are using the pcf2127 chip as an rtc on the odroid c2. To use this hardware on the i2c network requires that rtc-pcf2127 be available as a module, which it is not presently. I have tested its inclusion as a module in a custom build of the kernel and it works fine. Adding it as a module in the regularly updated kernel will make upgrades much easier for all those using this chip (shield).

jhsmt and others added 30 commits May 19, 2013 10:04
@jhsmt @gregkh
net_sched: act_ipt forward compat with xtables
368a315 
[ Upstream commit 0dcffd0 ]

Deal with changes in newer xtables while maintaining backward
compatibility. Thanks to Jan Engelhardt for suggestions.

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@shemminger @gregkh
bridge: fix race with topology change timer
577b25f 
[ Upstream commit 83401eb ]

A bridge should only send topology change notice if it is not
the root bridge. It is possible for message age timer to elect itself
as a new root bridge, and still have a topology change timer running
but waiting for bridge lock on other CPU.

Solve the race by checking if we are root bridge before continuing.
This was the root cause of the cases where br_send_tcn_bpdu would OOPS.

Reported-by: JerryKang <jerry.kang@samsung.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
3c59x: fix freeing nonexistent resource on driver unload
20a7e69 
[ Upstream commit c81400b ]

When unloading the driver that drives an EISA board, a message similar to the
following one is displayed:

Trying to free nonexistent resource <0000000000013000-000000000001301f>

Then an user is unable to reload the driver because the resource it requested in
the previous load hasn't been freed. This happens most probably due to a typo in
vortex_eisa_remove() which calls release_region() with 'dev->base_addr'  instead
of 'edev->base_addr'...

Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Tested-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
3c59x: fix PCI resource management
cddd4b7 
[ Upstream commit 4b264a1 ]

The driver wrongly claimed I/O ports at an address returned by pci_iomap() --
even if it was passed an MMIO address.  Fix this by claiming/releasing all PCI
resources in the PCI driver's probe()/remove() methods instead and get rid of
'must_free_region' flag weirdness (why would Cardbus claim anything for us?).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@jwboyer @gregkh
if_cablemodem.h: Add parenthesis around ioctl macros
1d81283 
[ Upstream commit 4f924b2 ]

Protect the SIOCGCM* ioctl macros with parenthesis.

Reported-by: Paul Wouters <pwouters@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@jpirko @gregkh
macvlan: fix passthru mode race between dev removal and rx path
d5bf240 
[ Upstream commit 233c7df, note
  that I had to add list_first_or_null_rcu to rculist.h in order
  to accomodate this fix. ]

Currently, if macvlan in passthru mode is created and data are rxed and
you remove this device, following panic happens:

NULL pointer dereference at 0000000000000198
IP: [<ffffffffa0196058>] macvlan_handle_frame+0x153/0x1f7 [macvlan]

I'm using following script to trigger this:
<script>
while [ 1 ]
do
	ip link add link e1 name macvtap0 type macvtap mode passthru
	ip link set e1 up
	ip link set macvtap0 up
	IFINDEX=`ip link |grep macvtap0 | cut -f 1 -d ':'`
	cat /dev/tap$IFINDEX  >/dev/null &
	ip link del dev macvtap0
done
</script>

I run this script while "ping -f" is running on another machine to send
packets to e1 rx.

Reason of the panic is that list_first_entry() is blindly called in
macvlan_handle_frame() even if the list was empty. vlan is set to
incorrect pointer which leads to the crash.

I'm fixing this by protecting port->vlans list by rcu and by preventing
from getting incorrect pointer in case the list is empty.

Introduced by: commit eb06acd "macvlan: Introduce 'passthru' mode to takeover the underlying device"

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
ipv6: do not clear pinet6 field
1e74f2e 
[ Upstream commit f77d602 ]

We have seen multiple NULL dereferences in __inet6_lookup_established()

After analysis, I found that inet6_sk() could be NULL while the
check for sk_family == AF_INET6 was true.

Bug was added in linux-2.6.29 when RCU lookups were introduced in UDP
and TCP stacks.

Once an IPv6 socket, using SLAB_DESTROY_BY_RCU is inserted in a hash
table, we no longer can clear pinet6 field.

This patch extends logic used in commit fcbdf09
("net: fix nulls list corruptions in sk_prot_alloc")

TCP/UDP/UDPLite IPv6 protocols provide their own .clear_sk() method
to make sure we do not clear pinet6 field.

At socket clone phase, we do not really care, as cloning the parent (non
NULL) pinet6 is not adding a fatal race.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
xfrm6: release dev before returning error
a7e22d0 
[ Upstream commit 84c4a9d ]

We forget to call dev_put() on error path in xfrm6_fill_dst(),
its caller doesn't handle this.

Signed-off-by: Cong Wang <amwang@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
pch_dma: Use GFP_ATOMIC because called from interrupt context
b89396e 
commit 5c1ef59 upstream.

pdc_desc_get() is called from pd_prep_slave_sg, and the function is
called from interrupt context(e.g. Uart driver "pch_uart.c").
In fact, I saw kernel error message.
So, GFP_ATOMIC must be used not GFP_NOIO.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
r8169: fix vlan tag read ordering.
e81164c 
commit ce11ff5 upstream.

Control of receive descriptor must not be returned to ethernet chipset
before vlan tag processing is done.

VLAN tag receive word is now reset both in normal and error path.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Spotted-by: Timo Teras <timo.teras@iki.fi>
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@Philipp-Reisner @gregkh
drbd: fix for deadlock when using automatic split-brain-recovery
d8b1123 
commit 7c689e6 upstream.

With an automatic after split-brain recovery policy of
"after-sb-1pri call-pri-lost-after-sb",
when trying to drbd_set_role() to R_SECONDARY,
we run into a deadlock.

This was first recognized and supposedly fixed by
2009-06-10 "Fixed a deadlock when using automatic split brain recovery when both nodes are"
replacing drbd_set_role() with drbd_change_state() in that code-path,
but the first hunk of that patch forgets to remove the drbd_set_role().

We apparently only ever tested the "two primaries" case.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
drivers/rtc/rtc-pcf2123.c: fix error return code in pcf2123_probe()
5cb2df3 
commit 3562371 upstream.

Fix to return -ENODEV in the chip not found error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
ACPI / EC: Restart transaction even when the IBF flag set
9e5124c 
commit 28fe5c8 upstream.

The EC driver works abnormally with IBF flag always set.
IBF means "The host has written a byte of data to the command
or data port, but the embedded controller has not yet read it".
If IBF is set in the EC status and not cleared, this will cause
all subsequent EC requests to fail with a timeout error.

Change the EC driver so that it doesn't refuse to restart a
transaction if IBF is set in the status.  Also increase the
number of transaction restarts to 5, as it turns out that 2
is not sufficient in some cases.

This bug happens on several different machines (Asus V1S,
Dell Latitude E6530, Samsung R719, Acer Aspire 5930G,
Sony Vaio SR19VN and others).

[rjw: Changelog]
References: https://bugzilla.kernel.org/show_bug.cgi?id=14733
References: https://bugzilla.kernel.org/show_bug.cgi?id=15560
References: https://bugzilla.kernel.org/show_bug.cgi?id=15946
References: https://bugzilla.kernel.org/show_bug.cgi?id=42945
References: https://bugzilla.kernel.org/show_bug.cgi?id=48221
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
drivers/char/ipmi: memcpy, need additional 2 bytes to avoid memory ov…
c9e43f3 
…erflow

commit a5f2b3d upstream.

When calling memcpy, read_data and write_data need additional 2 bytes.

  write_data:
    for checking:  "if (size > IPMI_MAX_MSG_LENGTH)"
    for operating: "memcpy(bt->write_data + 3, data + 1, size - 1)"

  read_data:
    for checking:  "if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH)"
    for operating: "memcpy(data + 2, bt->read_data + 4, msg_len - 2)"

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@bcrl @gregkh
ipmi: ipmi_devintf: compat_ioctl method fails to take ipmi_mutex
4866844 
commit 6368087 upstream.

When a 32 bit version of ipmitool is used on a 64 bit kernel, the
ipmi_devintf code fails to correctly acquire ipmi_mutex.  This results in
incomplete data being retrieved in some cases, or other possible failures.
Add a wrapper around compat_ipmi_ioctl() to take ipmi_mutex to fix this.

Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@kees @gregkh
drm/radeon: check incoming cliprects pointer
ac087d8 
commit fefaedc upstream.

The "boxes" parameter points into userspace memory. It should be verified
like any other operation against user memory.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@oleg-nesterov @gregkh
usermodehelper: check subprocess_info->path != NULL
49432a0 
commit 264b83c upstream.

argv_split(empty_or_all_spaces) happily succeeds, it simply returns
argc == 0 and argv[0] == NULL. Change call_usermodehelper_exec() to
check sub_info->path != NULL to avoid the crash.

This is the minimal fix, todo:

 - perhaps we should change argv_split() to return NULL or change the
   callers.

 - kill or justify ->path[0] check

 - narrow the scope of helper_lock()

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-By: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
Linux 3.0.79
ae101a3
@hardkernel
Merge branch 'linux-3.0.y' of https://git.kernel.org/pub/scm/linux/ke…
b3bcd0f 
…rnel/git/stable/linux-stable into odroid-3.0.y
@g2p @gregkh
btrfs: don't stop searching after encountering the wrong item
3f98318 
commit 03b71c6 upstream.

The search ioctl skips items that are too large for a result buffer, but
inline items of a certain size occuring before any search result is
found would trigger an overflow and stop the search entirely.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=57641

Signed-off-by: Gabriel de Perthuis <g2p.code+btrfs@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
hwmon: fix error return code in abituguru_probe()
38180ec 
commit ecacb0b upstream.

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
media: mantis: fix silly crash case
e51c0ea 
commit e1d45ae upstream.

If we set mantis->fe to NULL on an error its not a good idea to then try
passing NULL to the unregister paths and oopsing really.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=16473

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
Linux 3.0.80
f942943
@hardkernel
Merge branch 'linux-3.0.y' of https://git.kernel.org/pub/scm/linux/ke…
f1123bb 
…rnel/git/stable/linux-stable into odroid-3.0.y
@egtvedt @gregkh
avr32: fix relocation check for signed 18-bit offset
e9a91cb 
commit e68c636 upstream.

Caught by static code analysis by David.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gclement @gregkh
ARM: plat-orion: Fix num_resources and id for ge10 and ge11
8a3e6d8 
commit 2b8b279 upstream.

When platform data were moved from arch/arm/mach-mv78xx0/common.c to
arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion:
Consolidate ethernet platform data", there were few typo made on
gigabit Ethernet interface ge10 and ge11. This commit writes back
their initial value, which allows to use this interfaces again.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@hemaprathaban @gregkh
staging: vt6656: use free_netdev instead of kfree
bbb17fe 
commit 0a438d5 upstream.

use free_netdev() instead of kfree(pDevice->apdev)

Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
usb: option: Add Telewell TW-LTE 4G
4c54027 
commit 73c042d upstream.

Information from driver description files:

  diag:  VID_19D2&PID_0412&MI_00
  nmea:  VID_19D2&PID_0412&MI_01
  at:    VID_19D2&PID_0412&MI_02
  modem: VID_19D2&PID_0412&MI_03
  net:   VID_19D2&PID_0412&MI_04

Signed-off-by: Teppo Kotilainen <qubit303@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@dcbw @gregkh
USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card
ef98b82 
commit 49c6e37 upstream.

A rebranded Novatel E371 for AT&T's LTE bands.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@gregkh
USB: ftdi_sio: Add support for Newport CONEX motor drivers
e50d48c 
commit 7138143 upstream.

Here are two more devices that use FTDI USB-to-serial chips with new product ID's.

The devices are the Newport Conex-AGP and Conex-CC motor controllers.
(http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx)
(http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx)

usb-devices command yields:

P:  Vendor=104d ProdID=3002 Rev=06.00
S:  Manufacturer=Newport
S:  Product=CONEX-CC

as well as

P:  Vendor=104d ProdID=3006 Rev=06.00
S:  Manufacturer=Newport
S:  Product=CONEX-AGP

Signed-off-by: Andrew Gomella <andrew.gomella@nih.gov>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
heftig referenced this pull request in zen-kernel/zen-kernel Dec 21, 2018
@osandov @gregkh
Btrfs: fix missing delayed iputs on unmount
b4c7c82 
[ Upstream commit d6fd0ae ]

There's a race between close_ctree() and cleaner_kthread().
close_ctree() sets btrfs_fs_closing(), and the cleaner stops when it
sees it set, but this is racy; the cleaner might have already checked
the bit and could be cleaning stuff. In particular, if it deletes unused
block groups, it will create delayed iputs for the free space cache
inodes. As of "btrfs: don't run delayed_iputs in commit", we're no
longer running delayed iputs after a commit. Therefore, if the cleaner
creates more delayed iputs after delayed iputs are run in
btrfs_commit_super(), we will leak inodes on unmount and get a busy
inode crash from the VFS.

Fix it by parking the cleaner before we actually close anything. Then,
any remaining delayed iputs will always be handled in
btrfs_commit_super(). This also ensures that the commit in close_ctree()
is really the last commit, so we can get rid of the commit in
cleaner_kthread().

The fstest/generic/475 followed by 476 can trigger a crash that
manifests as a slab corruption caused by accessing the freed kthread
structure by a wake up function. Sample trace:

[ 5657.077612] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc
[ 5657.079432] PGD 1c57a067 P4D 1c57a067 PUD da10067 PMD 0
[ 5657.080661] Oops: 0000 [#1] PREEMPT SMP
[ 5657.081592] CPU: 1 PID: 5157 Comm: fsstress Tainted: G        W         4.19.0-rc8-default+ #323
[ 5657.083703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014
[ 5657.086577] RIP: 0010:shrink_page_list+0x2f9/0xe90
[ 5657.091937] RSP: 0018:ffffb5c745c8f728 EFLAGS: 00010287
[ 5657.092953] RAX: 0000000000000074 RBX: ffffb5c745c8f830 RCX: 0000000000000000
[ 5657.094590] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a8747fdf3d0
[ 5657.095987] RBP: ffffb5c745c8f9e0 R08: 0000000000000000 R09: 0000000000000000
[ 5657.097159] R10: ffff9a8747fdf5e8 R11: 0000000000000000 R12: ffffb5c745c8f788
[ 5657.098513] R13: ffff9a877f6ff2c0 R14: ffff9a877f6ff2c8 R15: dead000000000200
[ 5657.099689] FS:  00007f948d853b80(0000) GS:ffff9a877d600000(0000) knlGS:0000000000000000
[ 5657.101032] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5657.101953] CR2: 00000000000000cc CR3: 00000000684bd000 CR4: 00000000000006e0
[ 5657.103159] Call Trace:
[ 5657.103776]  shrink_inactive_list+0x194/0x410
[ 5657.104671]  shrink_node_memcg.constprop.84+0x39a/0x6a0
[ 5657.105750]  shrink_node+0x62/0x1c0
[ 5657.106529]  try_to_free_pages+0x1a4/0x500
[ 5657.107408]  __alloc_pages_slowpath+0x2c9/0xb20
[ 5657.108418]  __alloc_pages_nodemask+0x268/0x2b0
[ 5657.109348]  kmalloc_large_node+0x37/0x90
[ 5657.110205]  __kmalloc_node+0x236/0x310
[ 5657.111014]  kvmalloc_node+0x3e/0x70

Fixes: 30928e9 ("btrfs: don't run delayed_iputs in commit")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add trace ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
kakra pushed a commit to kakra/linux that referenced this pull request Dec 27, 2018
@osandov @kakra
Btrfs: fix missing delayed iputs on unmount
9428737 
[ Upstream commit d6fd0ae ]

There's a race between close_ctree() and cleaner_kthread().
close_ctree() sets btrfs_fs_closing(), and the cleaner stops when it
sees it set, but this is racy; the cleaner might have already checked
the bit and could be cleaning stuff. In particular, if it deletes unused
block groups, it will create delayed iputs for the free space cache
inodes. As of "btrfs: don't run delayed_iputs in commit", we're no
longer running delayed iputs after a commit. Therefore, if the cleaner
creates more delayed iputs after delayed iputs are run in
btrfs_commit_super(), we will leak inodes on unmount and get a busy
inode crash from the VFS.

Fix it by parking the cleaner before we actually close anything. Then,
any remaining delayed iputs will always be handled in
btrfs_commit_super(). This also ensures that the commit in close_ctree()
is really the last commit, so we can get rid of the commit in
cleaner_kthread().

The fstest/generic/475 followed by 476 can trigger a crash that
manifests as a slab corruption caused by accessing the freed kthread
structure by a wake up function. Sample trace:

[ 5657.077612] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc
[ 5657.079432] PGD 1c57a067 P4D 1c57a067 PUD da10067 PMD 0
[ 5657.080661] Oops: 0000 [#1] PREEMPT SMP
[ 5657.081592] CPU: 1 PID: 5157 Comm: fsstress Tainted: G        W         4.19.0-rc8-default+ torvalds#323
[ 5657.083703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014
[ 5657.086577] RIP: 0010:shrink_page_list+0x2f9/0xe90
[ 5657.091937] RSP: 0018:ffffb5c745c8f728 EFLAGS: 00010287
[ 5657.092953] RAX: 0000000000000074 RBX: ffffb5c745c8f830 RCX: 0000000000000000
[ 5657.094590] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a8747fdf3d0
[ 5657.095987] RBP: ffffb5c745c8f9e0 R08: 0000000000000000 R09: 0000000000000000
[ 5657.097159] R10: ffff9a8747fdf5e8 R11: 0000000000000000 R12: ffffb5c745c8f788
[ 5657.098513] R13: ffff9a877f6ff2c0 R14: ffff9a877f6ff2c8 R15: dead000000000200
[ 5657.099689] FS:  00007f948d853b80(0000) GS:ffff9a877d600000(0000) knlGS:0000000000000000
[ 5657.101032] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5657.101953] CR2: 00000000000000cc CR3: 00000000684bd000 CR4: 00000000000006e0
[ 5657.103159] Call Trace:
[ 5657.103776]  shrink_inactive_list+0x194/0x410
[ 5657.104671]  shrink_node_memcg.constprop.84+0x39a/0x6a0
[ 5657.105750]  shrink_node+0x62/0x1c0
[ 5657.106529]  try_to_free_pages+0x1a4/0x500
[ 5657.107408]  __alloc_pages_slowpath+0x2c9/0xb20
[ 5657.108418]  __alloc_pages_nodemask+0x268/0x2b0
[ 5657.109348]  kmalloc_large_node+0x37/0x90
[ 5657.110205]  __kmalloc_node+0x236/0x310
[ 5657.111014]  kvmalloc_node+0x3e/0x70

Fixes: 30928e9 ("btrfs: don't run delayed_iputs in commit")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add trace ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mrchapp pushed a commit to mrchapp/linux that referenced this pull request May 15, 2019
@osandov @gregkh
Btrfs: fix missing delayed iputs on unmount
ff6bc8e 
[ Upstream commit d6fd0ae ]

There's a race between close_ctree() and cleaner_kthread().
close_ctree() sets btrfs_fs_closing(), and the cleaner stops when it
sees it set, but this is racy; the cleaner might have already checked
the bit and could be cleaning stuff. In particular, if it deletes unused
block groups, it will create delayed iputs for the free space cache
inodes. As of "btrfs: don't run delayed_iputs in commit", we're no
longer running delayed iputs after a commit. Therefore, if the cleaner
creates more delayed iputs after delayed iputs are run in
btrfs_commit_super(), we will leak inodes on unmount and get a busy
inode crash from the VFS.

Fix it by parking the cleaner before we actually close anything. Then,
any remaining delayed iputs will always be handled in
btrfs_commit_super(). This also ensures that the commit in close_ctree()
is really the last commit, so we can get rid of the commit in
cleaner_kthread().

The fstest/generic/475 followed by 476 can trigger a crash that
manifests as a slab corruption caused by accessing the freed kthread
structure by a wake up function. Sample trace:

[ 5657.077612] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc
[ 5657.079432] PGD 1c57a067 P4D 1c57a067 PUD da10067 PMD 0
[ 5657.080661] Oops: 0000 [#1] PREEMPT SMP
[ 5657.081592] CPU: 1 PID: 5157 Comm: fsstress Tainted: G        W         4.19.0-rc8-default+ torvalds#323
[ 5657.083703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014
[ 5657.086577] RIP: 0010:shrink_page_list+0x2f9/0xe90
[ 5657.091937] RSP: 0018:ffffb5c745c8f728 EFLAGS: 00010287
[ 5657.092953] RAX: 0000000000000074 RBX: ffffb5c745c8f830 RCX: 0000000000000000
[ 5657.094590] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a8747fdf3d0
[ 5657.095987] RBP: ffffb5c745c8f9e0 R08: 0000000000000000 R09: 0000000000000000
[ 5657.097159] R10: ffff9a8747fdf5e8 R11: 0000000000000000 R12: ffffb5c745c8f788
[ 5657.098513] R13: ffff9a877f6ff2c0 R14: ffff9a877f6ff2c8 R15: dead000000000200
[ 5657.099689] FS:  00007f948d853b80(0000) GS:ffff9a877d600000(0000) knlGS:0000000000000000
[ 5657.101032] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5657.101953] CR2: 00000000000000cc CR3: 00000000684bd000 CR4: 00000000000006e0
[ 5657.103159] Call Trace:
[ 5657.103776]  shrink_inactive_list+0x194/0x410
[ 5657.104671]  shrink_node_memcg.constprop.84+0x39a/0x6a0
[ 5657.105750]  shrink_node+0x62/0x1c0
[ 5657.106529]  try_to_free_pages+0x1a4/0x500
[ 5657.107408]  __alloc_pages_slowpath+0x2c9/0xb20
[ 5657.108418]  __alloc_pages_nodemask+0x268/0x2b0
[ 5657.109348]  kmalloc_large_node+0x37/0x90
[ 5657.110205]  __kmalloc_node+0x236/0x310
[ 5657.111014]  kvmalloc_node+0x3e/0x70

Fixes: 30928e9 ("btrfs: don't run delayed_iputs in commit")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add trace ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
mrchapp pushed a commit to mrchapp/linux that referenced this pull request May 16, 2019
@osandov @gregkh
Btrfs: fix missing delayed iputs on unmount
6b50265 
[ Upstream commit d6fd0ae ]

There's a race between close_ctree() and cleaner_kthread().
close_ctree() sets btrfs_fs_closing(), and the cleaner stops when it
sees it set, but this is racy; the cleaner might have already checked
the bit and could be cleaning stuff. In particular, if it deletes unused
block groups, it will create delayed iputs for the free space cache
inodes. As of "btrfs: don't run delayed_iputs in commit", we're no
longer running delayed iputs after a commit. Therefore, if the cleaner
creates more delayed iputs after delayed iputs are run in
btrfs_commit_super(), we will leak inodes on unmount and get a busy
inode crash from the VFS.

Fix it by parking the cleaner before we actually close anything. Then,
any remaining delayed iputs will always be handled in
btrfs_commit_super(). This also ensures that the commit in close_ctree()
is really the last commit, so we can get rid of the commit in
cleaner_kthread().

The fstest/generic/475 followed by 476 can trigger a crash that
manifests as a slab corruption caused by accessing the freed kthread
structure by a wake up function. Sample trace:

[ 5657.077612] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc
[ 5657.079432] PGD 1c57a067 P4D 1c57a067 PUD da10067 PMD 0
[ 5657.080661] Oops: 0000 [#1] PREEMPT SMP
[ 5657.081592] CPU: 1 PID: 5157 Comm: fsstress Tainted: G        W         4.19.0-rc8-default+ torvalds#323
[ 5657.083703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014
[ 5657.086577] RIP: 0010:shrink_page_list+0x2f9/0xe90
[ 5657.091937] RSP: 0018:ffffb5c745c8f728 EFLAGS: 00010287
[ 5657.092953] RAX: 0000000000000074 RBX: ffffb5c745c8f830 RCX: 0000000000000000
[ 5657.094590] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a8747fdf3d0
[ 5657.095987] RBP: ffffb5c745c8f9e0 R08: 0000000000000000 R09: 0000000000000000
[ 5657.097159] R10: ffff9a8747fdf5e8 R11: 0000000000000000 R12: ffffb5c745c8f788
[ 5657.098513] R13: ffff9a877f6ff2c0 R14: ffff9a877f6ff2c8 R15: dead000000000200
[ 5657.099689] FS:  00007f948d853b80(0000) GS:ffff9a877d600000(0000) knlGS:0000000000000000
[ 5657.101032] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5657.101953] CR2: 00000000000000cc CR3: 00000000684bd000 CR4: 00000000000006e0
[ 5657.103159] Call Trace:
[ 5657.103776]  shrink_inactive_list+0x194/0x410
[ 5657.104671]  shrink_node_memcg.constprop.84+0x39a/0x6a0
[ 5657.105750]  shrink_node+0x62/0x1c0
[ 5657.106529]  try_to_free_pages+0x1a4/0x500
[ 5657.107408]  __alloc_pages_slowpath+0x2c9/0xb20
[ 5657.108418]  __alloc_pages_nodemask+0x268/0x2b0
[ 5657.109348]  kmalloc_large_node+0x37/0x90
[ 5657.110205]  __kmalloc_node+0x236/0x310
[ 5657.111014]  kvmalloc_node+0x3e/0x70

Fixes: 30928e9 ("btrfs: don't run delayed_iputs in commit")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add trace ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
mrchapp pushed a commit to mrchapp/linux that referenced this pull request May 17, 2019
@osandov @gregkh
Btrfs: fix missing delayed iputs on unmount
1ec2bf4 
[ Upstream commit d6fd0ae ]

There's a race between close_ctree() and cleaner_kthread().
close_ctree() sets btrfs_fs_closing(), and the cleaner stops when it
sees it set, but this is racy; the cleaner might have already checked
the bit and could be cleaning stuff. In particular, if it deletes unused
block groups, it will create delayed iputs for the free space cache
inodes. As of "btrfs: don't run delayed_iputs in commit", we're no
longer running delayed iputs after a commit. Therefore, if the cleaner
creates more delayed iputs after delayed iputs are run in
btrfs_commit_super(), we will leak inodes on unmount and get a busy
inode crash from the VFS.

Fix it by parking the cleaner before we actually close anything. Then,
any remaining delayed iputs will always be handled in
btrfs_commit_super(). This also ensures that the commit in close_ctree()
is really the last commit, so we can get rid of the commit in
cleaner_kthread().

The fstest/generic/475 followed by 476 can trigger a crash that
manifests as a slab corruption caused by accessing the freed kthread
structure by a wake up function. Sample trace:

[ 5657.077612] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc
[ 5657.079432] PGD 1c57a067 P4D 1c57a067 PUD da10067 PMD 0
[ 5657.080661] Oops: 0000 [#1] PREEMPT SMP
[ 5657.081592] CPU: 1 PID: 5157 Comm: fsstress Tainted: G        W         4.19.0-rc8-default+ torvalds#323
[ 5657.083703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014
[ 5657.086577] RIP: 0010:shrink_page_list+0x2f9/0xe90
[ 5657.091937] RSP: 0018:ffffb5c745c8f728 EFLAGS: 00010287
[ 5657.092953] RAX: 0000000000000074 RBX: ffffb5c745c8f830 RCX: 0000000000000000
[ 5657.094590] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a8747fdf3d0
[ 5657.095987] RBP: ffffb5c745c8f9e0 R08: 0000000000000000 R09: 0000000000000000
[ 5657.097159] R10: ffff9a8747fdf5e8 R11: 0000000000000000 R12: ffffb5c745c8f788
[ 5657.098513] R13: ffff9a877f6ff2c0 R14: ffff9a877f6ff2c8 R15: dead000000000200
[ 5657.099689] FS:  00007f948d853b80(0000) GS:ffff9a877d600000(0000) knlGS:0000000000000000
[ 5657.101032] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5657.101953] CR2: 00000000000000cc CR3: 00000000684bd000 CR4: 00000000000006e0
[ 5657.103159] Call Trace:
[ 5657.103776]  shrink_inactive_list+0x194/0x410
[ 5657.104671]  shrink_node_memcg.constprop.84+0x39a/0x6a0
[ 5657.105750]  shrink_node+0x62/0x1c0
[ 5657.106529]  try_to_free_pages+0x1a4/0x500
[ 5657.107408]  __alloc_pages_slowpath+0x2c9/0xb20
[ 5657.108418]  __alloc_pages_nodemask+0x268/0x2b0
[ 5657.109348]  kmalloc_large_node+0x37/0x90
[ 5657.110205]  __kmalloc_node+0x236/0x310
[ 5657.111014]  kvmalloc_node+0x3e/0x70

Fixes: 30928e9 ("btrfs: don't run delayed_iputs in commit")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add trace ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Jun 25, 2020
@shawnguo2 @intel-lab-lkp
drm/atomic_helper: duplicate state for drm_private_obj
1af003a 
The msm/mdp5 driver uses drm_private_obj as its global atomic state,
which keeps the assignment of hwpipe to plane.  With drm_private_obj
missing from duplicate state call, mdp5 suspend works with no problem
only for the very first time.  Any subsequent suspend will hit the
following warning, because hwpipe assignment doesn't get duplicated for
suspend state.  Adding drm_private_obj handling for duplicate state call
fixes the problem.

$ echo mem > /sys/power/state
[   38.111144] PM: suspend entry (deep)
[   38.111185] PM: Syncing filesystems ... done.
[   38.114630] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   38.115912] OOM killer disabled.
[   38.115914] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   38.122170] ------------[ cut here ]------------
[   38.122212] WARNING: CPU: 0 PID: 1747 at drivers/gpu/drm/msm/disp/mdp5/mdp5_pipe.c:145 mdp5_pipe_release+0x90/0xc0
[   38.122215] Modules linked in:
[   38.122222] CPU: 0 PID: 1747 Comm: sh Not tainted 4.19.107-00515-g9d5e4d7a33ed-dirty torvalds#323
[   38.122224] Hardware name: Square, Inc. T2 Devkit (DT)
[   38.122228] pstate: 40000005 (nZcv daif -PAN -UAO)
[   38.122230] pc : mdp5_pipe_release+0x90/0xc0
[   38.122233] lr : mdp5_pipe_release+0x90/0xc0
[   38.122235] sp : ffff00000d13b7f0
[   38.122236] x29: ffff00000d13b7f0 x28: 0000000000000000
[   38.122240] x27: 0000000000000002 x26: ffff800079adce00
[   38.122243] x25: ffff800079405200 x24: 0000000000000000
[   38.122246] x23: ffff80007a78cc08 x22: ffff80007b1cc018
[   38.122249] x21: ffff80007b1cc000 x20: ffff80007b317080
[   38.122252] x19: ffff80007a78ce80 x18: 0000000000020000
[   38.122255] x17: 0000000000000000 x16: 0000000000000000
[   38.122258] x15: 00000000fffffff0 x14: ffff000008c3fb48
[   38.122261] x13: ffff000008cdac4a x12: ffff000008c3f000
[   38.122264] x11: 0000000000000000 x10: ffff000008cda000
[   38.122267] x9 : 0000000000000000 x8 : ffff000008ce4a40
[   38.122269] x7 : 0000000000000000 x6 : 0000000039ea41a9
[   38.122272] x5 : 0000000000000000 x4 : 0000000000000000
[   38.122275] x3 : ffffffffffffffff x2 : c7580c109cae4500
[   38.122278] x1 : 0000000000000000 x0 : 0000000000000024
[   38.122281] Call trace:
[   38.122285]  mdp5_pipe_release+0x90/0xc0
[   38.122288]  mdp5_plane_atomic_check+0x2c0/0x448
[   38.122294]  drm_atomic_helper_check_planes+0xd0/0x208
[   38.122298]  drm_atomic_helper_check+0x38/0xa8
[   38.122302]  drm_atomic_check_only+0x3e8/0x630
[   38.122305]  drm_atomic_commit+0x18/0x58
[   38.122309]  __drm_atomic_helper_disable_all.isra.12+0x15c/0x1a8
[   38.122312]  drm_atomic_helper_suspend+0x80/0xf0
[   38.122316]  msm_pm_suspend+0x4c/0x70
[   38.122320]  dpm_run_callback.isra.6+0x20/0x68
[   38.122323]  __device_suspend+0x110/0x308
[   38.122326]  dpm_suspend+0x100/0x1f0
[   38.122329]  dpm_suspend_start+0x64/0x70
[   38.122334]  suspend_devices_and_enter+0x110/0x500
[   38.122336]  pm_suspend+0x268/0x2c0
[   38.122339]  state_store+0x88/0x110
[   38.122345]  kobj_attr_store+0x14/0x28
[   38.122352]  sysfs_kf_write+0x3c/0x50
[   38.122355]  kernfs_fop_write+0x118/0x1e0
[   38.122360]  __vfs_write+0x30/0x168
[   38.122363]  vfs_write+0xa4/0x1a8
[   38.122366]  ksys_write+0x64/0xe8
[   38.122368]  __arm64_sys_write+0x18/0x20
[   38.122374]  el0_svc_common+0x6c/0x178
[   38.122377]  el0_svc_compat_handler+0x1c/0x28
[   38.122381]  el0_svc_compat+0x8/0x18
[   38.122383] ---[ end trace 24145b7d8545345b ]---
[   38.491552] Disabling non-boot CPUs ...

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Jun 27, 2020
@shawnguo2 @intel-lab-lkp
drm/atomic_helper: add a flag for duplicating drm_private_obj state
9f718b8 
The msm/mdp5 driver uses state of drm_private_obj as its global atomic
state, which keeps the assignment of hwpipe to plane.  With
drm_private_obj missing from duplicate state call in context of atomic
suspend/resume helpers, mdp5 suspend works with no problem only for the
very first time.  Any subsequent suspend will hit the following warning,
because hwpipe assignment doesn't get duplicated for suspend state.

$ echo mem > /sys/power/state
[   38.111144] PM: suspend entry (deep)
[   38.111185] PM: Syncing filesystems ... done.
[   38.114630] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   38.115912] OOM killer disabled.
[   38.115914] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   38.122170] ------------[ cut here ]------------
[   38.122212] WARNING: CPU: 0 PID: 1747 at drivers/gpu/drm/msm/disp/mdp5/mdp5_pipe.c:145 mdp5_pipe_release+0x90/0xc0
[   38.122215] Modules linked in:
[   38.122222] CPU: 0 PID: 1747 Comm: sh Not tainted 4.19.107-00515-g9d5e4d7a33ed-dirty torvalds#323
[   38.122224] Hardware name: Square, Inc. T2 Devkit (DT)
[   38.122228] pstate: 40000005 (nZcv daif -PAN -UAO)
[   38.122230] pc : mdp5_pipe_release+0x90/0xc0
[   38.122233] lr : mdp5_pipe_release+0x90/0xc0
[   38.122235] sp : ffff00000d13b7f0
[   38.122236] x29: ffff00000d13b7f0 x28: 0000000000000000
[   38.122240] x27: 0000000000000002 x26: ffff800079adce00
[   38.122243] x25: ffff800079405200 x24: 0000000000000000
[   38.122246] x23: ffff80007a78cc08 x22: ffff80007b1cc018
[   38.122249] x21: ffff80007b1cc000 x20: ffff80007b317080
[   38.122252] x19: ffff80007a78ce80 x18: 0000000000020000
[   38.122255] x17: 0000000000000000 x16: 0000000000000000
[   38.122258] x15: 00000000fffffff0 x14: ffff000008c3fb48
[   38.122261] x13: ffff000008cdac4a x12: ffff000008c3f000
[   38.122264] x11: 0000000000000000 x10: ffff000008cda000
[   38.122267] x9 : 0000000000000000 x8 : ffff000008ce4a40
[   38.122269] x7 : 0000000000000000 x6 : 0000000039ea41a9
[   38.122272] x5 : 0000000000000000 x4 : 0000000000000000
[   38.122275] x3 : ffffffffffffffff x2 : c7580c109cae4500
[   38.122278] x1 : 0000000000000000 x0 : 0000000000000024
[   38.122281] Call trace:
[   38.122285]  mdp5_pipe_release+0x90/0xc0
[   38.122288]  mdp5_plane_atomic_check+0x2c0/0x448
[   38.122294]  drm_atomic_helper_check_planes+0xd0/0x208
[   38.122298]  drm_atomic_helper_check+0x38/0xa8
[   38.122302]  drm_atomic_check_only+0x3e8/0x630
[   38.122305]  drm_atomic_commit+0x18/0x58
[   38.122309]  __drm_atomic_helper_disable_all.isra.12+0x15c/0x1a8
[   38.122312]  drm_atomic_helper_suspend+0x80/0xf0
[   38.122316]  msm_pm_suspend+0x4c/0x70
[   38.122320]  dpm_run_callback.isra.6+0x20/0x68
[   38.122323]  __device_suspend+0x110/0x308
[   38.122326]  dpm_suspend+0x100/0x1f0
[   38.122329]  dpm_suspend_start+0x64/0x70
[   38.122334]  suspend_devices_and_enter+0x110/0x500
[   38.122336]  pm_suspend+0x268/0x2c0
[   38.122339]  state_store+0x88/0x110
[   38.122345]  kobj_attr_store+0x14/0x28
[   38.122352]  sysfs_kf_write+0x3c/0x50
[   38.122355]  kernfs_fop_write+0x118/0x1e0
[   38.122360]  __vfs_write+0x30/0x168
[   38.122363]  vfs_write+0xa4/0x1a8
[   38.122366]  ksys_write+0x64/0xe8
[   38.122368]  __arm64_sys_write+0x18/0x20
[   38.122374]  el0_svc_common+0x6c/0x178
[   38.122377]  el0_svc_compat_handler+0x1c/0x28
[   38.122381]  el0_svc_compat+0x8/0x18
[   38.122383] ---[ end trace 24145b7d8545345b ]---
[   38.491552] Disabling non-boot CPUs ...

Let's add a flag for duplicating the state of drm_private_obj and set
the flag from msm/mdp5 driver, so that the problem can be fixed while
other drivers using drm_private_obj stay unaffected.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Mar 15, 2021
@intel-lab-lkp
Staging: rtl8723bs: fix spaces in odm.c
0da988e 
This commit fixes the following checkpatch.pl errors:

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#285: FILE: ./hal/odm.c:285:
    +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#287: FILE: ./hal/odm.c:287:
    +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#289: FILE: ./hal/odm.c:289:
    +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#291: FILE: ./hal/odm.c:291:
    +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#305: FILE: ./hal/odm.c:305:
    +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#309: FILE: ./hal/odm.c:309:
    +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#311: FILE: ./hal/odm.c:311:
    +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#313: FILE: ./hal/odm.c:313:
    +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#315: FILE: ./hal/odm.c:315:
    +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#323: FILE: ./hal/odm.c:323:
    +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#325: FILE: ./hal/odm.c:325:
    +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#327: FILE: ./hal/odm.c:327:
    +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#330: FILE: ./hal/odm.c:330:
    +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#338: FILE: ./hal/odm.c:338:
    +void odm_InitHybridAntDiv(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#341: FILE: ./hal/odm.c:341:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#349: FILE: ./hal/odm.c:349:
    +void odm_SetRxIdleAnt(struct DM_ODM_T * pDM_Odm, u8 Ant, bool bDualPath);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#353: FILE: ./hal/odm.c:353:
    +void odm_HwAntDiv(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#363: FILE: ./hal/odm.c:363:
    +void ODM_DMInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#393: FILE: ./hal/odm.c:393:
    +void ODM_DMWatchdog(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#420: FILE: ./hal/odm.c:420:
    +		struct DIG_T * pDM_DigTable = &pDM_Odm->DM_DigTable;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#448: FILE: ./hal/odm.c:448:
    +void ODM_CmnInfoInit(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, u32 Value)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#560: FILE: ./hal/odm.c:560:
    +void ODM_CmnInfoHook(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, void *pValue)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#689: FILE: ./hal/odm.c:689:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#717: FILE: ./hal/odm.c:717:
    +void ODM_CmnInfoUpdate(struct DM_ODM_T * pDM_Odm, u32 CmnInfo, u64 Value)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#831: FILE: ./hal/odm.c:831:
    +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#841: FILE: ./hal/odm.c:841:
    +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#867: FILE: ./hal/odm.c:867:
    +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#888: FILE: ./hal/odm.c:888:
    +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#935: FILE: ./hal/odm.c:935:
    +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#937: FILE: ./hal/odm.c:937:
    +	struct ODM_RATE_ADAPTIVE * pOdmRA = &pDM_Odm->RateAdaptive;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#953: FILE: ./hal/odm.c:953:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1083: FILE: ./hal/odm.c:1083:
    +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1094: FILE: ./hal/odm.c:1094:
    +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1131: FILE: ./hal/odm.c:1131:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1137: FILE: ./hal/odm.c:1137:
    +	struct ODM_RATE_ADAPTIVE * pRA = &pDM_Odm->RateAdaptive;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1196: FILE: ./hal/odm.c:1196:
    +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1198: FILE: ./hal/odm.c:1198:
    +	struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1204: FILE: ./hal/odm.c:1204:
    +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1217: FILE: ./hal/odm.c:1217:
    +	struct DM_ODM_T * pDM_Odm = &(pHalData->odmpriv);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1234: FILE: ./hal/odm.c:1234:
    +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1243: FILE: ./hal/odm.c:1243:
    +	struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1306: FILE: ./hal/odm.c:1306:
    +static u8 getSwingIndex(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1330: FILE: ./hal/odm.c:1330:
    +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1374: FILE: ./hal/odm.c:1374:
    +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1398: FILE: ./hal/odm.c:1398:
    +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1400: FILE: ./hal/odm.c:1400:
    +	struct SWAT_T * pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;

Signed-off-by: Marco Cesati <marcocesati@gmail.com>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Mar 16, 2021
@gregkh
Staging: rtl8723bs: fix spaces in odm.c
8c86ab1 
This commit fixes the following checkpatch.pl errors:

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#285: FILE: ./hal/odm.c:285:
    +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#287: FILE: ./hal/odm.c:287:
    +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#289: FILE: ./hal/odm.c:289:
    +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#291: FILE: ./hal/odm.c:291:
    +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#305: FILE: ./hal/odm.c:305:
    +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#309: FILE: ./hal/odm.c:309:
    +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#311: FILE: ./hal/odm.c:311:
    +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#313: FILE: ./hal/odm.c:313:
    +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#315: FILE: ./hal/odm.c:315:
    +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#323: FILE: ./hal/odm.c:323:
    +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#325: FILE: ./hal/odm.c:325:
    +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#327: FILE: ./hal/odm.c:327:
    +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#330: FILE: ./hal/odm.c:330:
    +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#338: FILE: ./hal/odm.c:338:
    +void odm_InitHybridAntDiv(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#341: FILE: ./hal/odm.c:341:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#349: FILE: ./hal/odm.c:349:
    +void odm_SetRxIdleAnt(struct DM_ODM_T * pDM_Odm, u8 Ant, bool bDualPath);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#353: FILE: ./hal/odm.c:353:
    +void odm_HwAntDiv(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#363: FILE: ./hal/odm.c:363:
    +void ODM_DMInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#393: FILE: ./hal/odm.c:393:
    +void ODM_DMWatchdog(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#420: FILE: ./hal/odm.c:420:
    +		struct DIG_T * pDM_DigTable = &pDM_Odm->DM_DigTable;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#448: FILE: ./hal/odm.c:448:
    +void ODM_CmnInfoInit(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, u32 Value)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#560: FILE: ./hal/odm.c:560:
    +void ODM_CmnInfoHook(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, void *pValue)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#689: FILE: ./hal/odm.c:689:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#717: FILE: ./hal/odm.c:717:
    +void ODM_CmnInfoUpdate(struct DM_ODM_T * pDM_Odm, u32 CmnInfo, u64 Value)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#831: FILE: ./hal/odm.c:831:
    +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#841: FILE: ./hal/odm.c:841:
    +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#867: FILE: ./hal/odm.c:867:
    +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#888: FILE: ./hal/odm.c:888:
    +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#935: FILE: ./hal/odm.c:935:
    +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#937: FILE: ./hal/odm.c:937:
    +	struct ODM_RATE_ADAPTIVE * pOdmRA = &pDM_Odm->RateAdaptive;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#953: FILE: ./hal/odm.c:953:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1083: FILE: ./hal/odm.c:1083:
    +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1094: FILE: ./hal/odm.c:1094:
    +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1131: FILE: ./hal/odm.c:1131:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1137: FILE: ./hal/odm.c:1137:
    +	struct ODM_RATE_ADAPTIVE * pRA = &pDM_Odm->RateAdaptive;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1196: FILE: ./hal/odm.c:1196:
    +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1198: FILE: ./hal/odm.c:1198:
    +	struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1204: FILE: ./hal/odm.c:1204:
    +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1217: FILE: ./hal/odm.c:1217:
    +	struct DM_ODM_T * pDM_Odm = &(pHalData->odmpriv);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1234: FILE: ./hal/odm.c:1234:
    +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1243: FILE: ./hal/odm.c:1243:
    +	struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1306: FILE: ./hal/odm.c:1306:
    +static u8 getSwingIndex(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1330: FILE: ./hal/odm.c:1330:
    +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1374: FILE: ./hal/odm.c:1374:
    +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1398: FILE: ./hal/odm.c:1398:
    +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1400: FILE: ./hal/odm.c:1400:
    +	struct SWAT_T * pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;

Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marco Cesati <marcocesati@gmail.com>
Link: https://lore.kernel.org/r/20210315170618.2566-21-marcocesati@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Apr 8, 2021
@kirankrishnappa-intel @intel-lab-lkp
Bluetooth: Fix alt settings for incoming SCO with transparent coding …
2c689e3 
…format

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  torvalds#309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 torvalds#310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  torvalds#311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               torvalds#314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#325 [hci0] 49.500311

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request May 7, 2021
@kirankrishnappa-intel @holtmann
Bluetooth: Fix alt settings for incoming SCO with transparent coding …
13ee93d 
…format

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  torvalds#309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 torvalds#310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  torvalds#311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               torvalds#314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#325 [hci0] 49.500311

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
roxell pushed a commit to roxell/linux that referenced this pull request May 10, 2021
@kirankrishnappa-intel @holtmann
Bluetooth: Fix alt settings for incoming SCO with transparent coding …
39cf4a9 
…format

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  torvalds#309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 torvalds#310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  torvalds#311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               torvalds#314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#325 [hci0] 49.500311

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Jun 28, 2021
@kirankrishnappa-intel @holtmann
Bluetooth: Fix alt settings for incoming SCO with transparent coding …
06d213d 
…format

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  torvalds#309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 torvalds#310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  torvalds#311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               torvalds#314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#325 [hci0] 49.500311

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
intersectRaven pushed a commit to intersectRaven/linux that referenced this pull request Jul 19, 2021
@kirankrishnappa-intel @gregkh
Bluetooth: Fix alt settings for incoming SCO with transparent coding …
286bba2 
…format

[ Upstream commit 06d213d ]

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  torvalds#309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 torvalds#310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  torvalds#311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               torvalds#314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#325 [hci0] 49.500311

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
damentz referenced this pull request in zen-kernel/zen-kernel Jul 19, 2021
@kirankrishnappa-intel @gregkh
Bluetooth: Fix alt settings for incoming SCO with transparent coding …
fc98840 
…format

[ Upstream commit 06d213d ]

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  #309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 #310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  #311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               #314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #325 [hci0] 49.500311

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
repojohnray pushed a commit to repojohnray/linux-sunxi-4.7.y that referenced this pull request Jul 19, 2021
@kirankrishnappa-intel @gregkh
Bluetooth: Fix alt settings for incoming SCO with transparent coding …
5147d86 
…format

[ Upstream commit 06d213d ]

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  linux-sunxi#309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 torvalds#310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  torvalds#311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               torvalds#314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#325 [hci0] 49.500311

Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Lokendra Singh <lokendra.singh@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
roxell pushed a commit to roxell/linux that referenced this pull request Feb 12, 2024
@wqyoung @herbertx
crypto: xilinx - call finalize with bh disabled
a853450 
When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
mj22226 pushed a commit to mj22226/linux that referenced this pull request Mar 23, 2024
@wqyoung
crypto: xilinx - call finalize with bh disabled
5397cbe 
[ Upstream commit a853450 ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mj22226 pushed a commit to mj22226/linux that referenced this pull request Mar 23, 2024
@wqyoung
crypto: xilinx - call finalize with bh disabled
308d2f9 
[ Upstream commit a853450 ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kaz205 pushed a commit to Kaz205/linux that referenced this pull request Mar 23, 2024
@wqyoung
crypto: xilinx - call finalize with bh disabled
a134cde 
[ Upstream commit a853450 ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mj22226 pushed a commit to mj22226/linux that referenced this pull request Mar 24, 2024
@wqyoung
crypto: xilinx - call finalize with bh disabled
82a7b70 
[ Upstream commit a853450 ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
mj22226 pushed a commit to mj22226/linux that referenced this pull request Mar 24, 2024
@wqyoung
crypto: xilinx - call finalize with bh disabled
7b1c45e 
[ Upstream commit a853450 ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kaz205 pushed a commit to Kaz205/linux that referenced this pull request Mar 25, 2024
@wqyoung
crypto: xilinx - call finalize with bh disabled
19539e7 
[ Upstream commit a853450 ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
morimoto pushed a commit to morimoto/linux that referenced this pull request Mar 27, 2024
@wqyoung
crypto: xilinx - call finalize with bh disabled
23bc89f 
[ Upstream commit a853450 ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
staging-kernelci-org pushed a commit to kernelci/linux that referenced this pull request Mar 27, 2024
@wqyoung
crypto: xilinx - call finalize with bh disabled
a71f66b 
[ Upstream commit a853450 ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kaz205 pushed a commit to Kaz205/linux that referenced this pull request Mar 27, 2024
@wqyoung
crypto: xilinx - call finalize with bh disabled
dbf291d 
[ Upstream commit a853450 ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ericwoud pushed a commit to ericwoud/linux that referenced this pull request Mar 28, 2024
@wqyoung
crypto: xilinx - call finalize with bh disabled
9db89b1 
[ Upstream commit a853450 ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
1054009064 pushed a commit to 1054009064/linux that referenced this pull request Mar 29, 2024
@wqyoung
crypto: xilinx - call finalize with bh disabled
8a01335 
[ Upstream commit a853450 ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
1054009064 pushed a commit to 1054009064/linux that referenced this pull request Mar 29, 2024
@wqyoung
crypto: xilinx - call finalize with bh disabled
03e6d4e 
[ Upstream commit a853450 ]

When calling crypto_finalize_request, BH should be disabled to avoid
triggering the following calltrace:

    ------------[ cut here ]------------
    WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118
    Modules linked in: cryptodev(O)
    CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G           O       6.8.0-rc1-yocto-standard torvalds#323
    Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
    pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    pc : crypto_finalize_request+0xa0/0x118
    lr : crypto_finalize_request+0x104/0x118
    sp : ffffffc085353ce0
    x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688
    x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00
    x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000
    x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450
    x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0
    x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8
    x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001
    x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000
    x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000
    Call trace:
     crypto_finalize_request+0xa0/0x118
     crypto_finalize_aead_request+0x18/0x30
     zynqmp_handle_aes_req+0xcc/0x388
     crypto_pump_work+0x168/0x2d8
     kthread_worker_fn+0xfc/0x3a0
     kthread+0x118/0x138
     ret_from_fork+0x10/0x20
    irq event stamp: 40
    hardirqs last  enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0
    hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90
    softirqs last  enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0
    softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0
    ---[ end trace 0000000000000000 ]---

Fixes: 4d96f7d ("crypto: xilinx - Add Xilinx AES driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.