Remove redundant msg.msg_namelen = 0 in drivers/staging/usbip/ubip_common.c #39
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
tom3q
pushed a commit
to tom3q/linux
that referenced
this pull request
Jun 22, 2013
This commit fixes a lockdep-detected deadlock by moving a wake_up() call out from a rnp->lock critical section. Please see below for the long version of this story. On Tue, 2013-05-28 at 16:13 -0400, Dave Jones wrote: > [12572.705832] ====================================================== > [12572.750317] [ INFO: possible circular locking dependency detected ] > [12572.796978] 3.10.0-rc3+ torvalds#39 Not tainted > [12572.833381] ------------------------------------------------------- > [12572.862233] trinity-child17/31341 is trying to acquire lock: > [12572.870390] (rcu_node_0){..-.-.}, at: [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0 > [12572.878859] > but task is already holding lock: > [12572.894894] (&ctx->lock){-.-...}, at: [<ffffffff811390ed>] perf_lock_task_context+0x7d/0x2d0 > [12572.903381] > which lock already depends on the new lock. > > [12572.927541] > the existing dependency chain (in reverse order) is: > [12572.943736] > -> #4 (&ctx->lock){-.-...}: > [12572.960032] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12572.968337] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80 > [12572.976633] [<ffffffff8113c987>] __perf_event_task_sched_out+0x2e7/0x5e0 > [12572.984969] [<ffffffff81088953>] perf_event_task_sched_out+0x93/0xa0 > [12572.993326] [<ffffffff816ea0bf>] __schedule+0x2cf/0x9c0 > [12573.001652] [<ffffffff816eacfe>] schedule_user+0x2e/0x70 > [12573.009998] [<ffffffff816ecd64>] retint_careful+0x12/0x2e > [12573.018321] > -> #3 (&rq->lock){-.-.-.}: > [12573.034628] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.042930] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80 > [12573.051248] [<ffffffff8108e6a7>] wake_up_new_task+0xb7/0x260 > [12573.059579] [<ffffffff810492f5>] do_fork+0x105/0x470 > [12573.067880] [<ffffffff81049686>] kernel_thread+0x26/0x30 > [12573.076202] [<ffffffff816cee63>] rest_init+0x23/0x140 > [12573.084508] [<ffffffff81ed8e1f>] start_kernel+0x3f1/0x3fe > [12573.092852] [<ffffffff81ed856f>] x86_64_start_reservations+0x2a/0x2c > [12573.101233] [<ffffffff81ed863d>] x86_64_start_kernel+0xcc/0xcf > [12573.109528] > -> #2 (&p->pi_lock){-.-.-.}: > [12573.125675] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.133829] [<ffffffff816ebe9b>] _raw_spin_lock_irqsave+0x4b/0x90 > [12573.141964] [<ffffffff8108e881>] try_to_wake_up+0x31/0x320 > [12573.150065] [<ffffffff8108ebe2>] default_wake_function+0x12/0x20 > [12573.158151] [<ffffffff8107bbf8>] autoremove_wake_function+0x18/0x40 > [12573.166195] [<ffffffff81085398>] __wake_up_common+0x58/0x90 > [12573.174215] [<ffffffff81086909>] __wake_up+0x39/0x50 > [12573.182146] [<ffffffff810fc3da>] rcu_start_gp_advanced.isra.11+0x4a/0x50 > [12573.190119] [<ffffffff810fdb09>] rcu_start_future_gp+0x1c9/0x1f0 > [12573.198023] [<ffffffff810fe2c4>] rcu_nocb_kthread+0x114/0x930 > [12573.205860] [<ffffffff8107a91d>] kthread+0xed/0x100 > [12573.213656] [<ffffffff816f4b1c>] ret_from_fork+0x7c/0xb0 > [12573.221379] > -> #1 (&rsp->gp_wq){..-.-.}: > [12573.236329] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.243783] [<ffffffff816ebe9b>] _raw_spin_lock_irqsave+0x4b/0x90 > [12573.251178] [<ffffffff810868f3>] __wake_up+0x23/0x50 > [12573.258505] [<ffffffff810fc3da>] rcu_start_gp_advanced.isra.11+0x4a/0x50 > [12573.265891] [<ffffffff810fdb09>] rcu_start_future_gp+0x1c9/0x1f0 > [12573.273248] [<ffffffff810fe2c4>] rcu_nocb_kthread+0x114/0x930 > [12573.280564] [<ffffffff8107a91d>] kthread+0xed/0x100 > [12573.287807] [<ffffffff816f4b1c>] ret_from_fork+0x7c/0xb0 Notice the above call chain. rcu_start_future_gp() is called with the rnp->lock held. Then it calls rcu_start_gp_advance, which does a wakeup. You can't do wakeups while holding the rnp->lock, as that would mean that you could not do a rcu_read_unlock() while holding the rq lock, or any lock that was taken while holding the rq lock. This is because... (See below). > [12573.295067] > -> #0 (rcu_node_0){..-.-.}: > [12573.309293] [<ffffffff810b8d36>] __lock_acquire+0x1786/0x1af0 > [12573.316568] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.323825] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80 > [12573.331081] [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0 > [12573.338377] [<ffffffff810760a6>] __rcu_read_unlock+0x96/0xa0 > [12573.345648] [<ffffffff811391b3>] perf_lock_task_context+0x143/0x2d0 > [12573.352942] [<ffffffff8113938e>] find_get_context+0x4e/0x1f0 > [12573.360211] [<ffffffff811403f4>] SYSC_perf_event_open+0x514/0xbd0 > [12573.367514] [<ffffffff81140e49>] SyS_perf_event_open+0x9/0x10 > [12573.374816] [<ffffffff816f4dd4>] tracesys+0xdd/0xe2 Notice the above trace. perf took its own ctx->lock, which can be taken while holding the rq lock. While holding this lock, it did a rcu_read_unlock(). The perf_lock_task_context() basically looks like: rcu_read_lock(); raw_spin_lock(ctx->lock); rcu_read_unlock(); Now, what looks to have happened, is that we scheduled after taking that first rcu_read_lock() but before taking the spin lock. When we scheduled back in and took the ctx->lock, the following rcu_read_unlock() triggered the "special" code. The rcu_read_unlock_special() takes the rnp->lock, which gives us a possible deadlock scenario. CPU0 CPU1 CPU2 ---- ---- ---- rcu_nocb_kthread() lock(rq->lock); lock(ctx->lock); lock(rnp->lock); wake_up(); lock(rq->lock); rcu_read_unlock(); rcu_read_unlock_special(); lock(rnp->lock); lock(ctx->lock); **** DEADLOCK **** > [12573.382068] > other info that might help us debug this: > > [12573.403229] Chain exists of: > rcu_node_0 --> &rq->lock --> &ctx->lock > > [12573.424471] Possible unsafe locking scenario: > > [12573.438499] CPU0 CPU1 > [12573.445599] ---- ---- > [12573.452691] lock(&ctx->lock); > [12573.459799] lock(&rq->lock); > [12573.467010] lock(&ctx->lock); > [12573.474192] lock(rcu_node_0); > [12573.481262] > *** DEADLOCK *** > > [12573.501931] 1 lock held by trinity-child17/31341: > [12573.508990] #0: (&ctx->lock){-.-...}, at: [<ffffffff811390ed>] perf_lock_task_context+0x7d/0x2d0 > [12573.516475] > stack backtrace: > [12573.530395] CPU: 1 PID: 31341 Comm: trinity-child17 Not tainted 3.10.0-rc3+ torvalds#39 > [12573.545357] ffffffff825b4f90 ffff880219f1dbc0 ffffffff816e375b ffff880219f1dc00 > [12573.552868] ffffffff816dfa5d ffff880219f1dc50 ffff88023ce4d1f8 ffff88023ce4ca40 > [12573.560353] 0000000000000001 0000000000000001 ffff88023ce4d1f8 ffff880219f1dcc0 > [12573.567856] Call Trace: > [12573.575011] [<ffffffff816e375b>] dump_stack+0x19/0x1b > [12573.582284] [<ffffffff816dfa5d>] print_circular_bug+0x200/0x20f > [12573.589637] [<ffffffff810b8d36>] __lock_acquire+0x1786/0x1af0 > [12573.596982] [<ffffffff810918f5>] ? sched_clock_cpu+0xb5/0x100 > [12573.604344] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.611652] [<ffffffff811054ff>] ? rcu_read_unlock_special+0x9f/0x4c0 > [12573.619030] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80 > [12573.626331] [<ffffffff811054ff>] ? rcu_read_unlock_special+0x9f/0x4c0 > [12573.633671] [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0 > [12573.640992] [<ffffffff811390ed>] ? perf_lock_task_context+0x7d/0x2d0 > [12573.648330] [<ffffffff810b429e>] ? put_lock_stats.isra.29+0xe/0x40 > [12573.655662] [<ffffffff813095a0>] ? delay_tsc+0x90/0xe0 > [12573.662964] [<ffffffff810760a6>] __rcu_read_unlock+0x96/0xa0 > [12573.670276] [<ffffffff811391b3>] perf_lock_task_context+0x143/0x2d0 > [12573.677622] [<ffffffff81139070>] ? __perf_event_enable+0x370/0x370 > [12573.684981] [<ffffffff8113938e>] find_get_context+0x4e/0x1f0 > [12573.692358] [<ffffffff811403f4>] SYSC_perf_event_open+0x514/0xbd0 > [12573.699753] [<ffffffff8108cd9d>] ? get_parent_ip+0xd/0x50 > [12573.707135] [<ffffffff810b71fd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 > [12573.714599] [<ffffffff81140e49>] SyS_perf_event_open+0x9/0x10 > [12573.721996] [<ffffffff816f4dd4>] tracesys+0xdd/0xe2 This commit delays the wakeup via irq_work(), which is what perf and ftrace use to perform wakeups in critical sections. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
tom3q
pushed a commit
to tom3q/linux
that referenced
this pull request
Jun 22, 2013
This commit fixes a lockdep-detected deadlock by moving a wake_up() call out from a rnp->lock critical section. Please see below for the long version of this story. On Tue, 2013-05-28 at 16:13 -0400, Dave Jones wrote: > [12572.705832] ====================================================== > [12572.750317] [ INFO: possible circular locking dependency detected ] > [12572.796978] 3.10.0-rc3+ torvalds#39 Not tainted > [12572.833381] ------------------------------------------------------- > [12572.862233] trinity-child17/31341 is trying to acquire lock: > [12572.870390] (rcu_node_0){..-.-.}, at: [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0 > [12572.878859] > but task is already holding lock: > [12572.894894] (&ctx->lock){-.-...}, at: [<ffffffff811390ed>] perf_lock_task_context+0x7d/0x2d0 > [12572.903381] > which lock already depends on the new lock. > > [12572.927541] > the existing dependency chain (in reverse order) is: > [12572.943736] > -> #4 (&ctx->lock){-.-...}: > [12572.960032] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12572.968337] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80 > [12572.976633] [<ffffffff8113c987>] __perf_event_task_sched_out+0x2e7/0x5e0 > [12572.984969] [<ffffffff81088953>] perf_event_task_sched_out+0x93/0xa0 > [12572.993326] [<ffffffff816ea0bf>] __schedule+0x2cf/0x9c0 > [12573.001652] [<ffffffff816eacfe>] schedule_user+0x2e/0x70 > [12573.009998] [<ffffffff816ecd64>] retint_careful+0x12/0x2e > [12573.018321] > -> #3 (&rq->lock){-.-.-.}: > [12573.034628] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.042930] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80 > [12573.051248] [<ffffffff8108e6a7>] wake_up_new_task+0xb7/0x260 > [12573.059579] [<ffffffff810492f5>] do_fork+0x105/0x470 > [12573.067880] [<ffffffff81049686>] kernel_thread+0x26/0x30 > [12573.076202] [<ffffffff816cee63>] rest_init+0x23/0x140 > [12573.084508] [<ffffffff81ed8e1f>] start_kernel+0x3f1/0x3fe > [12573.092852] [<ffffffff81ed856f>] x86_64_start_reservations+0x2a/0x2c > [12573.101233] [<ffffffff81ed863d>] x86_64_start_kernel+0xcc/0xcf > [12573.109528] > -> #2 (&p->pi_lock){-.-.-.}: > [12573.125675] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.133829] [<ffffffff816ebe9b>] _raw_spin_lock_irqsave+0x4b/0x90 > [12573.141964] [<ffffffff8108e881>] try_to_wake_up+0x31/0x320 > [12573.150065] [<ffffffff8108ebe2>] default_wake_function+0x12/0x20 > [12573.158151] [<ffffffff8107bbf8>] autoremove_wake_function+0x18/0x40 > [12573.166195] [<ffffffff81085398>] __wake_up_common+0x58/0x90 > [12573.174215] [<ffffffff81086909>] __wake_up+0x39/0x50 > [12573.182146] [<ffffffff810fc3da>] rcu_start_gp_advanced.isra.11+0x4a/0x50 > [12573.190119] [<ffffffff810fdb09>] rcu_start_future_gp+0x1c9/0x1f0 > [12573.198023] [<ffffffff810fe2c4>] rcu_nocb_kthread+0x114/0x930 > [12573.205860] [<ffffffff8107a91d>] kthread+0xed/0x100 > [12573.213656] [<ffffffff816f4b1c>] ret_from_fork+0x7c/0xb0 > [12573.221379] > -> #1 (&rsp->gp_wq){..-.-.}: > [12573.236329] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.243783] [<ffffffff816ebe9b>] _raw_spin_lock_irqsave+0x4b/0x90 > [12573.251178] [<ffffffff810868f3>] __wake_up+0x23/0x50 > [12573.258505] [<ffffffff810fc3da>] rcu_start_gp_advanced.isra.11+0x4a/0x50 > [12573.265891] [<ffffffff810fdb09>] rcu_start_future_gp+0x1c9/0x1f0 > [12573.273248] [<ffffffff810fe2c4>] rcu_nocb_kthread+0x114/0x930 > [12573.280564] [<ffffffff8107a91d>] kthread+0xed/0x100 > [12573.287807] [<ffffffff816f4b1c>] ret_from_fork+0x7c/0xb0 Notice the above call chain. rcu_start_future_gp() is called with the rnp->lock held. Then it calls rcu_start_gp_advance, which does a wakeup. You can't do wakeups while holding the rnp->lock, as that would mean that you could not do a rcu_read_unlock() while holding the rq lock, or any lock that was taken while holding the rq lock. This is because... (See below). > [12573.295067] > -> #0 (rcu_node_0){..-.-.}: > [12573.309293] [<ffffffff810b8d36>] __lock_acquire+0x1786/0x1af0 > [12573.316568] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.323825] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80 > [12573.331081] [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0 > [12573.338377] [<ffffffff810760a6>] __rcu_read_unlock+0x96/0xa0 > [12573.345648] [<ffffffff811391b3>] perf_lock_task_context+0x143/0x2d0 > [12573.352942] [<ffffffff8113938e>] find_get_context+0x4e/0x1f0 > [12573.360211] [<ffffffff811403f4>] SYSC_perf_event_open+0x514/0xbd0 > [12573.367514] [<ffffffff81140e49>] SyS_perf_event_open+0x9/0x10 > [12573.374816] [<ffffffff816f4dd4>] tracesys+0xdd/0xe2 Notice the above trace. perf took its own ctx->lock, which can be taken while holding the rq lock. While holding this lock, it did a rcu_read_unlock(). The perf_lock_task_context() basically looks like: rcu_read_lock(); raw_spin_lock(ctx->lock); rcu_read_unlock(); Now, what looks to have happened, is that we scheduled after taking that first rcu_read_lock() but before taking the spin lock. When we scheduled back in and took the ctx->lock, the following rcu_read_unlock() triggered the "special" code. The rcu_read_unlock_special() takes the rnp->lock, which gives us a possible deadlock scenario. CPU0 CPU1 CPU2 ---- ---- ---- rcu_nocb_kthread() lock(rq->lock); lock(ctx->lock); lock(rnp->lock); wake_up(); lock(rq->lock); rcu_read_unlock(); rcu_read_unlock_special(); lock(rnp->lock); lock(ctx->lock); **** DEADLOCK **** > [12573.382068] > other info that might help us debug this: > > [12573.403229] Chain exists of: > rcu_node_0 --> &rq->lock --> &ctx->lock > > [12573.424471] Possible unsafe locking scenario: > > [12573.438499] CPU0 CPU1 > [12573.445599] ---- ---- > [12573.452691] lock(&ctx->lock); > [12573.459799] lock(&rq->lock); > [12573.467010] lock(&ctx->lock); > [12573.474192] lock(rcu_node_0); > [12573.481262] > *** DEADLOCK *** > > [12573.501931] 1 lock held by trinity-child17/31341: > [12573.508990] #0: (&ctx->lock){-.-...}, at: [<ffffffff811390ed>] perf_lock_task_context+0x7d/0x2d0 > [12573.516475] > stack backtrace: > [12573.530395] CPU: 1 PID: 31341 Comm: trinity-child17 Not tainted 3.10.0-rc3+ torvalds#39 > [12573.545357] ffffffff825b4f90 ffff880219f1dbc0 ffffffff816e375b ffff880219f1dc00 > [12573.552868] ffffffff816dfa5d ffff880219f1dc50 ffff88023ce4d1f8 ffff88023ce4ca40 > [12573.560353] 0000000000000001 0000000000000001 ffff88023ce4d1f8 ffff880219f1dcc0 > [12573.567856] Call Trace: > [12573.575011] [<ffffffff816e375b>] dump_stack+0x19/0x1b > [12573.582284] [<ffffffff816dfa5d>] print_circular_bug+0x200/0x20f > [12573.589637] [<ffffffff810b8d36>] __lock_acquire+0x1786/0x1af0 > [12573.596982] [<ffffffff810918f5>] ? sched_clock_cpu+0xb5/0x100 > [12573.604344] [<ffffffff810b9851>] lock_acquire+0x91/0x1f0 > [12573.611652] [<ffffffff811054ff>] ? rcu_read_unlock_special+0x9f/0x4c0 > [12573.619030] [<ffffffff816ebc90>] _raw_spin_lock+0x40/0x80 > [12573.626331] [<ffffffff811054ff>] ? rcu_read_unlock_special+0x9f/0x4c0 > [12573.633671] [<ffffffff811054ff>] rcu_read_unlock_special+0x9f/0x4c0 > [12573.640992] [<ffffffff811390ed>] ? perf_lock_task_context+0x7d/0x2d0 > [12573.648330] [<ffffffff810b429e>] ? put_lock_stats.isra.29+0xe/0x40 > [12573.655662] [<ffffffff813095a0>] ? delay_tsc+0x90/0xe0 > [12573.662964] [<ffffffff810760a6>] __rcu_read_unlock+0x96/0xa0 > [12573.670276] [<ffffffff811391b3>] perf_lock_task_context+0x143/0x2d0 > [12573.677622] [<ffffffff81139070>] ? __perf_event_enable+0x370/0x370 > [12573.684981] [<ffffffff8113938e>] find_get_context+0x4e/0x1f0 > [12573.692358] [<ffffffff811403f4>] SYSC_perf_event_open+0x514/0xbd0 > [12573.699753] [<ffffffff8108cd9d>] ? get_parent_ip+0xd/0x50 > [12573.707135] [<ffffffff810b71fd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 > [12573.714599] [<ffffffff81140e49>] SyS_perf_event_open+0x9/0x10 > [12573.721996] [<ffffffff816f4dd4>] tracesys+0xdd/0xe2 This commit delays the wakeup via irq_work(), which is what perf and ftrace use to perform wakeups in critical sections. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
swarren
pushed a commit
to swarren/linux-tegra
that referenced
this pull request
Oct 14, 2013
As the new x86 CPU bootup printout format code maintainer, I am taking immediate action to improve and clean (and thus indulge my OCD) the reporting of the cores when coming up online. Fix padding to a right-hand alignment, cleanup code and bind reporting width to the max number of supported CPUs on the system, like this: [ 0.074509] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 OK [ 0.644008] smpboot: Booting Node 1, Processors: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 OK [ 1.245006] smpboot: Booting Node 2, Processors: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 OK [ 1.864005] smpboot: Booting Node 3, Processors: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 OK [ 2.489005] smpboot: Booting Node 4, Processors: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 OK [ 3.093005] smpboot: Booting Node 5, Processors: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 OK [ 3.698005] smpboot: Booting Node 6, Processors: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 OK [ 4.304005] smpboot: Booting Node 7, Processors: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 OK [ 4.961413] Brought up 64 CPUs and this: [ 0.072367] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 OK [ 0.686329] Brought up 8 CPUs Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Libin <huawei.libin@huawei.com> Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Link: http://lkml.kernel.org/r/20130927143554.GF4422@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
swarren
pushed a commit
to swarren/linux-tegra
that referenced
this pull request
Oct 14, 2013
Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 [ 0.603005] .... node #1, CPUs: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 [ 1.200005] .... node #2, CPUs: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.796005] .... node #3, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 [ 2.393005] .... node #4, CPUs: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 [ 2.996005] .... node #5, CPUs: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 3.600005] .... node torvalds#6, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 [ 4.202005] .... node torvalds#7, CPUs: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 [ 4.811005] .... node torvalds#8, CPUs: torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 5.421006] .... node torvalds#9, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 [ 6.032005] .... node torvalds#10, CPUs: torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 [ 6.648006] .... node torvalds#11, CPUs: torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 7.262005] .... node torvalds#12, CPUs: torvalds#96 torvalds#97 torvalds#98 torvalds#99 torvalds#100 torvalds#101 torvalds#102 torvalds#103 [ 7.865005] .... node torvalds#13, CPUs: torvalds#104 torvalds#105 torvalds#106 torvalds#107 torvalds#108 torvalds#109 torvalds#110 torvalds#111 [ 8.466005] .... node torvalds#14, CPUs: torvalds#112 torvalds#113 torvalds#114 torvalds#115 torvalds#116 torvalds#117 torvalds#118 torvalds#119 [ 9.073006] .... node torvalds#15, CPUs: torvalds#120 torvalds#121 torvalds#122 torvalds#123 torvalds#124 torvalds#125 torvalds#126 torvalds#127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: huawei.libin@huawei.com Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
Gnurou
pushed a commit
to Gnurou/linux
that referenced
this pull request
Jun 6, 2014
…-checkpatch-fixes WARNING: line over 80 characters torvalds#39: FILE: mm/internal.h:207: + * pte lock is held(spinlock), which implies preemption disabled. WARNING: line over 80 characters torvalds#55: FILE: mm/rmap.c:988: + * pte lock(a spinlock) is held, which implies preemption disabled. total: 0 errors, 2 warnings, 44 lines checked ./patches/mm-use-the-light-version-__mod_zone_page_state-in-mlocked_vma_newpage.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Jianyu Zhan <nasa4836@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
koct9i
pushed a commit
to koct9i/linux
that referenced
this pull request
Sep 23, 2014
ERROR: code indent should use tabs where possible torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: please, no spaces at the start of a line torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: Prefer [subsystem eg: netdev]_alert([subsystem]dev, ... then dev_alert(dev, ... then pr_alert(... to printk(KERN_ALERT ... torvalds#74: FILE: mm/debug.c:171: + printk(KERN_ALERT total: 6 errors, 7 warnings, 109 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-introduce-vm_bug_on_mm.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
aryabinin
pushed a commit
to aryabinin/linux
that referenced
this pull request
Sep 24, 2014
ERROR: code indent should use tabs where possible torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: please, no spaces at the start of a line torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: Prefer [subsystem eg: netdev]_alert([subsystem]dev, ... then dev_alert(dev, ... then pr_alert(... to printk(KERN_ALERT ... torvalds#74: FILE: mm/debug.c:171: + printk(KERN_ALERT total: 6 errors, 7 warnings, 109 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-introduce-vm_bug_on_mm.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ddstreet
pushed a commit
to ddstreet/linux
that referenced
this pull request
Sep 25, 2014
ERROR: code indent should use tabs where possible torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: please, no spaces at the start of a line torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: Prefer [subsystem eg: netdev]_alert([subsystem]dev, ... then dev_alert(dev, ... then pr_alert(... to printk(KERN_ALERT ... torvalds#74: FILE: mm/debug.c:171: + printk(KERN_ALERT total: 6 errors, 7 warnings, 109 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-introduce-vm_bug_on_mm.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
koct9i
pushed a commit
to koct9i/linux
that referenced
this pull request
Sep 27, 2014
ERROR: code indent should use tabs where possible torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: please, no spaces at the start of a line torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: Prefer [subsystem eg: netdev]_alert([subsystem]dev, ... then dev_alert(dev, ... then pr_alert(... to printk(KERN_ALERT ... torvalds#74: FILE: mm/debug.c:171: + printk(KERN_ALERT total: 6 errors, 7 warnings, 109 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-introduce-vm_bug_on_mm.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
tom3q
pushed a commit
to tom3q/linux
that referenced
this pull request
Oct 2, 2014
ERROR: code indent should use tabs where possible torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: please, no spaces at the start of a line torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: Prefer [subsystem eg: netdev]_alert([subsystem]dev, ... then dev_alert(dev, ... then pr_alert(... to printk(KERN_ALERT ... torvalds#74: FILE: mm/debug.c:171: + printk(KERN_ALERT total: 6 errors, 7 warnings, 109 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-introduce-vm_bug_on_mm.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
aryabinin
pushed a commit
to aryabinin/linux
that referenced
this pull request
Oct 3, 2014
ERROR: code indent should use tabs where possible torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: please, no spaces at the start of a line torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: Prefer [subsystem eg: netdev]_alert([subsystem]dev, ... then dev_alert(dev, ... then pr_alert(... to printk(KERN_ALERT ... torvalds#74: FILE: mm/debug.c:171: + printk(KERN_ALERT total: 6 errors, 7 warnings, 109 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-introduce-vm_bug_on_mm.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
bengal
pushed a commit
to bengal/linux
that referenced
this pull request
Oct 7, 2014
ERROR: code indent should use tabs where possible torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#37: FILE: include/linux/mmdebug.h:33: + do {^I^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#38: FILE: include/linux/mmdebug.h:34: + if (unlikely(cond)) {^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#39: FILE: include/linux/mmdebug.h:35: + dump_mm(mm);^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#40: FILE: include/linux/mmdebug.h:36: + BUG();^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ WARNING: please, no spaces at the start of a line torvalds#41: FILE: include/linux/mmdebug.h:37: + }^I^I^I^I^I^I^I\$ ERROR: code indent should use tabs where possible torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: please, no spaces at the start of a line torvalds#42: FILE: include/linux/mmdebug.h:38: + } while (0)$ WARNING: Prefer [subsystem eg: netdev]_alert([subsystem]dev, ... then dev_alert(dev, ... then pr_alert(... to printk(KERN_ALERT ... torvalds#74: FILE: mm/debug.c:171: + printk(KERN_ALERT total: 6 errors, 7 warnings, 109 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-introduce-vm_bug_on_mm.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
torvalds
pushed a commit
that referenced
this pull request
Oct 29, 2014
This patch wires up the new syscall sys_bpf() on powerpc.
Passes the tests in samples/bpf:
#0 add+sub+mul OK
#1 unreachable OK
#2 unreachable2 OK
#3 out of range jump OK
#4 out of range jump2 OK
#5 test1 ld_imm64 OK
#6 test2 ld_imm64 OK
#7 test3 ld_imm64 OK
#8 test4 ld_imm64 OK
#9 test5 ld_imm64 OK
#10 no bpf_exit OK
#11 loop (back-edge) OK
#12 loop2 (back-edge) OK
#13 conditional loop OK
#14 read uninitialized register OK
#15 read invalid register OK
#16 program doesn't init R0 before exit OK
#17 stack out of bounds OK
#18 invalid call insn1 OK
#19 invalid call insn2 OK
#20 invalid function call OK
#21 uninitialized stack1 OK
#22 uninitialized stack2 OK
#23 check valid spill/fill OK
#24 check corrupted spill/fill OK
#25 invalid src register in STX OK
#26 invalid dst register in STX OK
#27 invalid dst register in ST OK
#28 invalid src register in LDX OK
#29 invalid dst register in LDX OK
#30 junk insn OK
#31 junk insn2 OK
#32 junk insn3 OK
#33 junk insn4 OK
#34 junk insn5 OK
#35 misaligned read from stack OK
#36 invalid map_fd for function call OK
#37 don't check return value before access OK
#38 access memory with incorrect alignment OK
#39 sometimes access memory with incorrect alignment OK
#40 jump test 1 OK
#41 jump test 2 OK
#42 jump test 3 OK
#43 jump test 4 OK
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[mpe: test using samples/bpf]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
dabrace
referenced
this pull request
in dabrace/linux
Nov 10, 2014
This patch wires up the new syscall sys_bpf() on powerpc.
Passes the tests in samples/bpf:
#0 add+sub+mul OK
#1 unreachable OK
#2 unreachable2 OK
#3 out of range jump OK
#4 out of range jump2 OK
#5 test1 ld_imm64 OK
#6 test2 ld_imm64 OK
#7 test3 ld_imm64 OK
#8 test4 ld_imm64 OK
#9 test5 ld_imm64 OK
#10 no bpf_exit OK
#11 loop (back-edge) OK
#12 loop2 (back-edge) OK
#13 conditional loop OK
#14 read uninitialized register OK
#15 read invalid register OK
#16 program doesn't init R0 before exit OK
#17 stack out of bounds OK
#18 invalid call insn1 OK
#19 invalid call insn2 OK
#20 invalid function call OK
#21 uninitialized stack1 OK
#22 uninitialized stack2 OK
#23 check valid spill/fill OK
#24 check corrupted spill/fill OK
#25 invalid src register in STX OK
#26 invalid dst register in STX OK
#27 invalid dst register in ST OK
#28 invalid src register in LDX OK
#29 invalid dst register in LDX OK
#30 junk insn OK
#31 junk insn2 OK
#32 junk insn3 OK
#33 junk insn4 OK
#34 junk insn5 OK
#35 misaligned read from stack OK
#36 invalid map_fd for function call OK
#37 don't check return value before access OK
#38 access memory with incorrect alignment OK
#39 sometimes access memory with incorrect alignment OK
#40 jump test 1 OK
#41 jump test 2 OK
#42 jump test 3 OK
#43 jump test 4 OK
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[mpe: test using samples/bpf]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
aryabinin
referenced
this pull request
in aryabinin/linux
Nov 18, 2014
GIT ca1fa22e67bcfc84f49e44ad6f728e3e3d487dce
commit 48eb5b9c3dd2768b6a4de9c1eab606820fd84192
Author: Daniel Borkmann <dborkman@redhat.com>
Date: Tue Nov 11 10:22:05 2014 -0800
ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx
Status variable is never initialized, can carry an arbitrary value
on the stack and thus may let the function fail.
Fixes: e90dd2645664 ("ixgbe: Make return values more direct")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 4eed83a252257ad8ad41ba1c769341960ed4cdc5
Author: James Cameron <quozl@laptop.org>
Date: Tue Nov 11 16:21:28 2014 +1100
mwifiex: simplify ad hoc join capability info
While preparing an ad-hoc start command, the capability info bitmap is
needlessly set from the command, and then the ESS bit cleared.
Change to set the bitmap directly without reference to the command.
Signed-off-by: James Cameron <quozl@laptop.org>
Acked-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit d351f5fea44a7527819598070e11b5c9dc53c017
Author: Luciano Coelho <luciano.coelho@intel.com>
Date: Mon Nov 10 09:25:57 2014 +0200
wlcore: make wlcore_cmd_send_failsafe() static
The wlcore_cmd_send_failsafe() function is only called in the cmd.c
file, where it is definde. Make it static.
Additionally, move the EXPORT_SYMBOL macro for wl1271_cmd_send() to
the right place.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit f5b8f4790bb5dfd541f9d61589357ea6042cc668
Author: Luciano Coelho <luciano.coelho@intel.com>
Date: Mon Nov 10 09:25:17 2014 +0200
wlcore: check minimum buffer size in some cmd_send functions
Check for the minimum required buffer length in wlcore_cmd_send() and
wlcore_cmd_configure_failsafe. This ensures that we will never try to
use a buffer that is smaller than the required header.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 0d4b5c7c0892cb377cc71c388433425f598b902b
Author: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri Nov 7 02:14:52 2014 -0800
mwifiex: fix version display problem on big endian platforms
It's been observed that wrong firmware version (ex. 66.14.96.p9
instead of 14.66.9.p96) is displayed on big endian platforms.
The problem is fixed here.
Reported-by: Daniel Mosquera <daniel.mosquera@ctag.com>
Tested-by: Daniel Mosquera <daniel.mosquera@ctag.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 3f2aa13f6d16a53a4cf5de369c685c6f75fe4d58
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:38 2014 +0100
ath9k_htc: add spectral scan debug interface
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 83fb287ecd8ae60ed79c647a5df8beacdf4f4807
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:37 2014 +0100
ath9k_htc: process rx spectral packets
use code provided by Ashish Patro <patro@cs.wisc.edu>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 911544f6a8d66c27ff807f5d71e3f0f5a904c100
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:36 2014 +0100
ath9k_htc: trigger spectral scan on set_channel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 88a2e3fb7b7e9dd3c51ceef81e0415478c27910c
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:35 2014 +0100
ath9k_htc: set initial spec_config values
use values provided by Ashish Patro <patro@cs.wisc.edu>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit fe30e8bb5be52e2e6b913db77dda6c22b643dbd7
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:34 2014 +0100
ath9k_htc: add struct ath_spec_scan_priv to ath9k_htc_priv
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 94cd95c217a5ed4c45e2a8c97043c3efcd66dac9
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:33 2014 +0100
ath9k_htc: add ath_ps_ops bindings
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 525d09456b9fc2f769647c744c75629d9926fb9e
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:32 2014 +0100
ath9k_htc: fix rs_datalen conversation
For some reason it didn't coused obvious problems.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 46140ddf169703ef0538bf00098233b24b2269e8
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:31 2014 +0100
ath9k: For AR9271 chipsets, set count = 0 for endless samples.
not sure why.
Initially provided by Ashish Patro <patro@cs.wisc.edu>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 67dc74f15f147b9f88702de2952d2951e3e000ec
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:30 2014 +0100
ath9k: move spectral.* to common-spectral.*
and rename exports from ath9k_spectral_* to ath9k_cmn_spectral_*
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit f00a422cc81ef665f5098c0bc43cb0c616e55a9b
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:29 2014 +0100
ath9k: move ath9k_spectral_scan_ from main.c to spectral.c
Now we should be ready to make this code common.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 963916dfe2907d91eb8a250d12d2b5ae5a1bb343
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:28 2014 +0100
ath9k: make ath9k_spectral_scan_ do not depend on ath_softc
last preparation before moving ath9k_spectral_scan_ to spectral.c
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit ef948da55f20edbb68dac427b7e067c805c852f5
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:27 2014 +0100
ath9k: use ath_common instead of ieee80211_hw in ath9k_spectral_scan_
we don't have here any ieee80211_hw dependencies any way.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 934bdc73dd3029c1b91e1a3538268b4afccd58cf
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:26 2014 +0100
ath9k: use ath_ps_ops in ath9k_spectral_scan_
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 99d2217b731e664aa31001839f12944b1e114a08
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:25 2014 +0100
ath9k: add ath_ps_ops bindings
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 0198c2e2987c5cd4980f15126d7c68759f4def95
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:24 2014 +0100
ath: add struct ath_ps_ops
we will need it to make common code
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 1111d426ef6a62903a8427a80c2a20cdf0380349
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:23 2014 +0100
ath9k: remove all struct ath_softc dependencies from spectral code
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit dd7657be756551b23b3431d81e66a8d95a72c923
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:22 2014 +0100
ath9k: add ath_hw to ath_spec_scan_priv
spectral code mostly depends on ath_hw, not on ath_softc
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit c10b75af4344fe0e678d167cb401a94f565e978c
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:21 2014 +0100
ath9k: use struct dentry by ath9k_spectral_init_debug
this will alow us to make ath_softc independent code.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 21af25d00b8bdf03a899b316d41d31ac3eafaf78
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:20 2014 +0100
ath9k: move spec_config to ath_spec_scan_priv
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 8391f60194bd0d9ab489105381df6455afe1f39a
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:19 2014 +0100
ath9k: move spectral_mode to ath_spec_scan_priv
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 911ea79f435302fabefa305d3649efd4e205672b
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Thu Nov 6 08:53:18 2014 +0100
ath9k: add struct ath_spec_scan_priv
and move rfs_chan_spec_scan to this struct. We will need it
for common spectral scan code.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit d7d8b83473e6932cfe9f89e6d839f27abf35b319
Author: Avinash Patil <patila@marvell.com>
Date: Wed Nov 5 17:04:31 2014 +0530
mwifiex: fix warning while starting BSS
We see this warning while starting mwifiex AP:
Unsupported RX-STBC, default to 2x2
This was happening because of wrong offset while copying HT
capabilities from BSS configuration of start_ap handler.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit bfd713bc1a5d7f01e3d7febe0849b21ae1355c7c
Author: Avinash Patil <patila@marvell.com>
Date: Wed Nov 5 17:04:30 2014 +0530
mwifiex: do not setup AMPDU/AMSDU with broadcast receiver
It is observed that device sometimes sends BA setup requests for
broadcast mac address.
This patch adds a check to avoid checking availability of
AMPDU/AMSDU streams for broadcast mac address.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit cf6a64fd603ae0f7391f7589b0f3568d4e79605c
Author: Amitkumar Karwar <akarwar@marvell.com>
Date: Wed Nov 5 17:04:29 2014 +0530
mwifiex: fix out of memory issue observed for USB chipsets
On some platforms, system goes out of memory during heavy
Rx traffic with our USB chipsets.
In case of SDIO/PCIe, after receiving 50 packets in Rx queue
we stop processing interrupts till packets pending fall below
low threshold i.e 20. We don't have similar logic for USB,
so if host platform is slow, we would hit a case where firmware
keeps on pushing packets at high speed than driver/kernel can
process.
We will stop submitting URBs for Rx data when pending packet
count reaches high threshold and restart them when enough
packets are consumed to solve the problem.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=85071
Reported-by: Marek Belisko <marek.belisko@gmail.com>
Tested-by: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 041bfab5bbb6ec721c743f487e3e22b87f666996
Author: Avinash Patil <patila@marvell.com>
Date: Wed Nov 5 17:04:28 2014 +0530
mwifiex: remove data_complete handler
This patch removes redundant data complete handler.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit ec4a16b4d287d4d0f7465ae7e61ce4e9021d715c
Author: Avinash Patil <patila@marvell.com>
Date: Wed Nov 5 17:04:27 2014 +0530
mwifiex: rx workqueue support for USB interface
This patch adds RX workqueue support for USB interfaces.
Currently rx_pending is applicable for cmd/events and Rx
data in USB interface. Let's use it only for Rx data.
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit d385c5c2860075e1f3e03074f043dd8a828b2862
Author: Felix Fietkau <nbd@openwrt.org>
Date: Tue Nov 4 16:56:57 2014 +0100
ath9k: add support for reporting tx power to mac80211
Track it per channel context instead of in the softc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 71783576b5345d63df048c0f18974037eea6e4f9
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat Nov 1 16:54:56 2014 +0100
bcma: get IRQ numbers from dt
It is not possible to auto detect the irq numbers used by the cores on
an arm SoC. If bcma was registered with device tree it will search for
some device tree nodes with the irq number and add it to the core
configuration.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 85eb92e81801d64686eb78928d500a4c83ee9623
Author: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat Nov 1 16:54:55 2014 +0100
bcma: make it possible to specify a IRQ num in bcma_core_irq()
This moves bcma_core_irq() to main.c and add a extra parameter with a
number so that we can return different irq number for devices with more
than one.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 09626e9d153326ca82568e4e27f2daa53713992e
Author: WANG Cong <xiyou.wangcong@gmail.com>
Date: Tue Nov 11 13:29:42 2014 -0800
net: kill netif_copy_real_num_queues()
vlan was the only user of netif_copy_real_num_queues(),
but it no longer calls it after
commit 4af429d29b341bb1735f04c2fb960178 ("vlan: lockless transmit path").
So we can just remove it.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 67732cd34382066ae5df313b6dad65ab14b9735f
Author: Ulf Hansson <ulf.hansson@linaro.org>
Date: Tue Nov 11 11:07:08 2014 +0100
PM / Domains: Fix initial default state of the need_restore flag
The initial state of the device's need_restore flag should'nt depend on
the current state of the PM domain. For example it should be perfectly
valid to attach an inactive device to a powered PM domain.
The pm_genpd_dev_need_restore() API allow us to update the need_restore
flag to somewhat cope with such scenarios. Typically that should have
been done from drivers/buses ->probe() since it's those that put the
requirements on the value of the need_restore flag.
Until recently, the Exynos SOCs were the only user of the
pm_genpd_dev_need_restore() API, though invoking it from a centralized
location while adding devices to their PM domains.
Due to that Exynos now have swithed to the generic OF-based PM domain
look-up, it's no longer possible to invoke the API from a centralized
location. The reason is because devices are now added to their PM
domains during the probe sequence.
Commit "ARM: exynos: Move to generic PM domain DT bindings"
did the switch for Exynos to the generic OF-based PM domain look-up,
but it also removed the call to pm_genpd_dev_need_restore(). This
caused a regression for some of the Exynos drivers.
To handle things more properly in the generic PM domain, let's change
the default initial value of the need_restore flag to reflect that the
state is unknown. As soon as some of the runtime PM callbacks gets
invoked, update the initial value accordingly.
Moreover, since the generic PM domain is verifying that all devices
are both runtime PM enabled and suspended, using pm_runtime_suspended()
while pm_genpd_poweroff() is invoked from the scheduled work, we can be
sure of that the PM domain won't be powering off while having active
devices.
Do note that, the generic PM domain can still only know about active
devices which has been activated through invoking its runtime PM resume
callback. In other words, buses/drivers using pm_runtime_set_active()
during ->probe() will still suffer from a race condition, potentially
probing a device without having its PM domain being powered. That issue
will have to be solved using a different approach.
This a log from the boot regression for Exynos5, which is being fixed in
this patch.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 308 at ../drivers/clk/clk.c:851 clk_disable+0x24/0x30()
Modules linked in:
CPU: 0 PID: 308 Comm: kworker/0:1 Not tainted 3.18.0-rc3-00569-gbd9449f-dirty #10
Workqueue: pm pm_runtime_work
[<c0013c64>] (unwind_backtrace) from [<c0010dec>] (show_stack+0x10/0x14)
[<c0010dec>] (show_stack) from [<c03ee4cc>] (dump_stack+0x70/0xbc)
[<c03ee4cc>] (dump_stack) from [<c0020d34>] (warn_slowpath_common+0x64/0x88)
[<c0020d34>] (warn_slowpath_common) from [<c0020d74>] (warn_slowpath_null+0x1c/0x24)
[<c0020d74>] (warn_slowpath_null) from [<c03107b0>] (clk_disable+0x24/0x30)
[<c03107b0>] (clk_disable) from [<c02cc834>] (gsc_runtime_suspend+0x128/0x160)
[<c02cc834>] (gsc_runtime_suspend) from [<c0249024>] (pm_generic_runtime_suspend+0x2c/0x38)
[<c0249024>] (pm_generic_runtime_suspend) from [<c024f44c>] (pm_genpd_default_save_state+0x2c/0x8c)
[<c024f44c>] (pm_genpd_default_save_state) from [<c024ff2c>] (pm_genpd_poweroff+0x224/0x3ec)
[<c024ff2c>] (pm_genpd_poweroff) from [<c02501b4>] (pm_genpd_runtime_suspend+0x9c/0xcc)
[<c02501b4>] (pm_genpd_runtime_suspend) from [<c024a4f8>] (__rpm_callback+0x2c/0x60)
[<c024a4f8>] (__rpm_callback) from [<c024a54c>] (rpm_callback+0x20/0x74)
[<c024a54c>] (rpm_callback) from [<c024a930>] (rpm_suspend+0xd4/0x43c)
[<c024a930>] (rpm_suspend) from [<c024bbcc>] (pm_runtime_work+0x80/0x90)
[<c024bbcc>] (pm_runtime_work) from [<c0032a9c>] (process_one_work+0x12c/0x314)
[<c0032a9c>] (process_one_work) from [<c0032cf4>] (worker_thread+0x3c/0x4b0)
[<c0032cf4>] (worker_thread) from [<c003747c>] (kthread+0xcc/0xe8)
[<c003747c>] (kthread) from [<c000e738>] (ret_from_fork+0x14/0x3c)
---[ end trace 40cd58bcd6988f12 ]---
Fixes: a4a8c2c4962bb655 (ARM: exynos: Move to generic PM domain DT bindings)
Reported-and-tested0by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 4e6ce4dc7ce71d0886908d55129d5d6482a27ff9
Author: Miaoqing Pan <miaoqing@qca.qualcomm.com>
Date: Thu Nov 6 10:52:23 2014 +0530
ath9k: Fix RTC_DERIVED_CLK usage
Based on the reference clock, which could be 25MHz or 40MHz,
AR_RTC_DERIVED_CLK is programmed differently for AR9340 and AR9550.
But, when a chip reset is done, processing the initvals
sets the register back to the default value.
Fix this by moving the code in ath9k_hw_init_pll() to
ar9003_hw_override_ini(). Also, do this override for AR9531.
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 8bca81d9875c7768c40a19fb439eebaf6cec898d
Author: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Date: Tue Nov 11 14:10:47 2014 +0530
usbnet: smsc95xx: dereferencing NULL pointer
we were dereferencing dev to initialize pdata. but just after that we
have a BUG_ON(!dev). so we were basically dereferencing the pointer
first and then tesing it for NULL.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit d65c4e4e0aeb699e984bd4b382efffab418aa359
Author: Joe Perches <joe@perches.com>
Date: Tue Nov 11 13:13:41 2014 -0800
irda: Simplify IRDA logging macros
These are the same as net_<level>_ratelimited, so
use the more common style in the macro definition.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 79ce0477ffe82e7e49e55179cd176a1c33382744
Author: Brian Hill <brian@houston-radar.com>
Date: Tue Nov 11 13:39:39 2014 -0700
net: phy: Correctly handle MII ioctl which changes autonegotiation.
When advertised capabilities are changed with mii-tool, such as:
mii-tool -A 10baseT
the existing handler has two errors.
- An actual PHY register value is provided by mii-tool, and this
must be mapped to internal state with mii_adv_to_ethtool_adv_t().
- The PHY state machine needs to be told that autonegotiation has
again been performed. If not, the MAC will not be notified of
the new link speed and duplex, resulting in a possible config
mismatch.
Signed-off-by: Brian Hill <Brian@houston-radar.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 0cd75b19899fd86b51a6480fb8c00dcd85a54591
Author: Arend van Spriel <arend@broadcom.com>
Date: Tue Nov 11 13:58:44 2014 +0100
brcmfmac: fix conversion of channel width 20MHZ_NOHT
The function chandef_to_chanspec() failed when converting a
chandef with bandwidth set to NL80211_CHAN_WIDTH_20_NOHT. This
was reported by user running the device in AP mode.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 304 at
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c:381
chandef_to_chanspec.isra.11+0x158/0x184()
Modules linked in:
CPU: 0 PID: 304 Comm: hostapd Not tainted 3.16.0-rc7-abb+g64aa90f #8
[<c0014bb4>] (unwind_backtrace) from [<c0012314>] (show_stack+0x10/0x14)
[<c0012314>] (show_stack) from [<c001d3f8>] (warn_slowpath_common+0x6c/0x8c)
[<c001d3f8>] (warn_slowpath_common) from [<c001d4b4>] (warn_slowpath_null+0x1c/0x24)
[<c001d4b4>] (warn_slowpath_null) from [<c03449a4>] (chandef_to_chanspec.isra.11+0x158/0x184)
[<c03449a4>] (chandef_to_chanspec.isra.11) from [<c0348e00>] (brcmf_cfg80211_start_ap+0x1e4/0x614)
[<c0348e00>] (brcmf_cfg80211_start_ap) from [<c04d1468>] (nl80211_start_ap+0x288/0x414)
[<c04d1468>] (nl80211_start_ap) from [<c043d144>] (genl_rcv_msg+0x21c/0x38c)
[<c043d144>] (genl_rcv_msg) from [<c043c740>] (netlink_rcv_skb+0xac/0xc0)
[<c043c740>] (netlink_rcv_skb) from [<c043cf14>] (genl_rcv+0x20/0x34)
[<c043cf14>] (genl_rcv) from [<c043c0a0>] (netlink_unicast+0x150/0x20c)
[<c043c0a0>] (netlink_unicast) from [<c043c4b8>] (netlink_sendmsg+0x2b8/0x398)
[<c043c4b8>] (netlink_sendmsg) from [<c04066a4>] (sock_sendmsg+0x84/0xa8)
[<c04066a4>] (sock_sendmsg) from [<c0407c5c>] (___sys_sendmsg.part.29+0x268/0x278)
[<c0407c5c>] (___sys_sendmsg.part.29) from [<c0408bdc>] (__sys_sendmsg+0x4c/0x7c)
[<c0408bdc>] (__sys_sendmsg) from [<c000ec60>] (ret_fast_syscall+0x0/0x44)
---[ end trace 965ee2158c9905a2 ]---
Cc: stable@vger.kernel.org # v3.17
Reported-by: Pontus Fuchs <pontusf@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit cfd9167af14eb4ec21517a32911d460083ee3d59
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Tue Nov 11 14:28:47 2014 +0100
rt2x00: do not align payload on modern H/W
RT2800 and newer hardware require padding between header and payload if
header length is not multiple of 4.
For historical reasons we also align payload to to 4 bytes boundary, but
such alignment is not needed on modern H/W.
Patch fixes skb_under_panic problems reported from time to time:
https://bugzilla.kernel.org/show_bug.cgi?id=84911
https://bugzilla.kernel.org/show_bug.cgi?id=72471
http://marc.info/?l=linux-wireless&m=139108549530402&w=2
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1087591
Panic happened because we eat 4 bytes of skb headroom on each
(re)transmission when sending frame without the payload and the header
length not being multiple of 4 (i.e. QoS header has 26 bytes). On such
case because paylad_aling=2 is bigger than header_align=0 we increase
header_align by 4 bytes. To prevent that we could change the check to:
if (payload_length && payload_align > header_align)
header_align += 4;
but not aligning payload at all is more effective and alignment is not
really needed by H/W (that has been tested on OpenWrt project for few
years now).
Reported-and-tested-by: Antti S. Lankila <alankila@bel.fi>
Debugged-by: Antti S. Lankila <alankila@bel.fi>
Reported-by: Henrik Asp <solenskiner@gmail.com>
Originally-From: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit f47436734dc89ece62654d4db8d08163a89dd7ca
Author: Joe Perches <joe@perches.com>
Date: Fri Oct 31 10:50:46 2014 -0700
tile: Use the more common pr_warn instead of pr_warning
And other message logging neatening.
Other miscellanea:
o coalesce formats
o realign arguments
o standardize a couple of macros
o use __func__ instead of embedding the function name
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
commit ebd25caf7d511312d1a9724ab5752e9e661dfe60
Author: Chen Gang <gang.chen.5i5j@gmail.com>
Date: Sun Nov 9 18:32:03 2014 +0800
arch: tile: gxio: Export symbols for module using in 'mpipe.c'
'gxio_mpipe_adjust_timestamp', 'gxio_mpipe_link_instance',
'gxio_mpipe_get_timestamp', and 'gxio_mpipe_set_timestamp' may be use by
other tile modules, so export them.
The related error (with allmodconfig under tile):
MODPOST 4002 modules
ERROR: "gxio_mpipe_link_instance" [drivers/net/ethernet/tile/tile_net.ko] undefined!
ERROR: "gxio_mpipe_get_timestamp" [drivers/net/ethernet/tile/tile_net.ko] undefined!
ERROR: "gxio_mpipe_set_timestamp" [drivers/net/ethernet/tile/tile_net.ko] undefined!
ERROR: "gxio_mpipe_adjust_timestamp" [drivers/net/ethernet/tile/tile_net.ko] undefined!
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
commit 5337b5b75cd9bd3624a6820e3c2a084d2480061c
Author: Eric Dumazet <edumazet@google.com>
Date: Mon Nov 10 17:54:25 2014 -0800
ipv6: fix IPV6_PKTINFO with v4 mapped
Use IS_ENABLED(CONFIG_IPV6), to enable this code if IPv6 is
a module.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: c8e6ad0829a7 ("ipv6: honor IPV6_PKTINFO with v4 mapped addresses on sendmsg")
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit d7480fd3b1738a8eae6a76098b17af318cf9b9cc
Author: WANG Cong <xiyou.wangcong@gmail.com>
Date: Mon Nov 10 15:59:36 2014 -0800
neigh: remove dynamic neigh table registration support
Currently there are only three neigh tables in the whole kernel:
arp table, ndisc table and decnet neigh table. What's more,
we don't support registering multiple tables per family.
Therefore we can just make these tables statically built-in.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 4184b2a79a7612a9272ce20d639934584a1f3786
Author: Daniel Borkmann <dborkman@redhat.com>
Date: Mon Nov 10 18:00:09 2014 +0100
net: sctp: fix memory leak in auth key management
A very minimal and simple user space application allocating an SCTP
socket, setting SCTP_AUTH_KEY setsockopt(2) on it and then closing
the socket again will leak the memory containing the authentication
key from user space:
unreferenced object 0xffff8800837047c0 (size 16):
comm "a.out", pid 2789, jiffies 4296954322 (age 192.258s)
hex dump (first 16 bytes):
01 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff816d7e8e>] kmemleak_alloc+0x4e/0xb0
[<ffffffff811c88d8>] __kmalloc+0xe8/0x270
[<ffffffffa0870c23>] sctp_auth_create_key+0x23/0x50 [sctp]
[<ffffffffa08718b1>] sctp_auth_set_key+0xa1/0x140 [sctp]
[<ffffffffa086b383>] sctp_setsockopt+0xd03/0x1180 [sctp]
[<ffffffff815bfd94>] sock_common_setsockopt+0x14/0x20
[<ffffffff815beb61>] SyS_setsockopt+0x71/0xd0
[<ffffffff816e58a9>] system_call_fastpath+0x12/0x17
[<ffffffffffffffff>] 0xffffffffffffffff
This is bad because of two things, we can bring down a machine from
user space when auth_enable=1, but also we would leave security sensitive
keying material in memory without clearing it after use. The issue is
that sctp_auth_create_key() already sets the refcount to 1, but after
allocation sctp_auth_set_key() does an additional refcount on it, and
thus leaving it around when we free the socket.
Fixes: 65b07e5d0d0 ("[SCTP]: API updates to suport SCTP-AUTH extensions.")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit e40607cbe270a9e8360907cb1e62ddf0736e4864
Author: Daniel Borkmann <dborkman@redhat.com>
Date: Mon Nov 10 17:54:26 2014 +0100
net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet
An SCTP server doing ASCONF will panic on malformed INIT ping-of-death
in the form of:
------------ INIT[PARAM: SET_PRIMARY_IP] ------------>
While the INIT chunk parameter verification dissects through many things
in order to detect malformed input, it misses to actually check parameters
inside of parameters. E.g. RFC5061, section 4.2.4 proposes a 'set primary
IP address' parameter in ASCONF, which has as a subparameter an address
parameter.
So an attacker may send a parameter type other than SCTP_PARAM_IPV4_ADDRESS
or SCTP_PARAM_IPV6_ADDRESS, param_type2af() will subsequently return 0
and thus sctp_get_af_specific() returns NULL, too, which we then happily
dereference unconditionally through af->from_addr_param().
The trace for the log:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
IP: [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp]
PGD 0
Oops: 0000 [#1] SMP
[...]
Pid: 0, comm: swapper Not tainted 2.6.32-504.el6.x86_64 #1 Bochs Bochs
RIP: 0010:[<ffffffffa01e9c62>] [<ffffffffa01e9c62>] sctp_process_init+0x492/0x990 [sctp]
[...]
Call Trace:
<IRQ>
[<ffffffffa01f2add>] ? sctp_bind_addr_copy+0x5d/0xe0 [sctp]
[<ffffffffa01e1fcb>] sctp_sf_do_5_1B_init+0x21b/0x340 [sctp]
[<ffffffffa01e3751>] sctp_do_sm+0x71/0x1210 [sctp]
[<ffffffffa01e5c09>] ? sctp_endpoint_lookup_assoc+0xc9/0xf0 [sctp]
[<ffffffffa01e61f6>] sctp_endpoint_bh_rcv+0x116/0x230 [sctp]
[<ffffffffa01ee986>] sctp_inq_push+0x56/0x80 [sctp]
[<ffffffffa01fcc42>] sctp_rcv+0x982/0xa10 [sctp]
[<ffffffffa01d5123>] ? ipt_local_in_hook+0x23/0x28 [iptable_filter]
[<ffffffff8148bdc9>] ? nf_iterate+0x69/0xb0
[<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0
[<ffffffff8148bf86>] ? nf_hook_slow+0x76/0x120
[<ffffffff81496d10>] ? ip_local_deliver_finish+0x0/0x2d0
[...]
A minimal way to address this is to check for NULL as we do on all
other such occasions where we know sctp_get_af_specific() could
possibly return with NULL.
Fixes: d6de3097592b ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 5748eb8f8e989a9da1ac7c96dc73d68cbdedf7df
Author: Takashi Iwai <tiwai@suse.de>
Date: Mon Nov 10 11:50:21 2014 +0100
net: ppp: Don't call bpf_prog_create() in ppp_lock
In ppp_ioctl(), bpf_prog_create() is called inside ppp_lock, which
eventually calls vmalloc() and hits BUG_ON() in vmalloc.c. This patch
works around the problem by moving the allocation outside the lock.
The bug was revealed by the recent change in net/core/filter.c, as it
allocates via vmalloc() instead of kmalloc() now.
Reported-and-tested-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit b2e2f0c779fefede3a871781c8827bd8e76c7c0f
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Mon Nov 10 12:38:59 2014 +0200
stmmac: split to core library and probe drivers
Instead of registering the platform and PCI drivers in one module let's move
necessary bits to where it belongs. During this procedure we convert the module
registration part to use module_*_driver() macros which makes code simplier.
>From now on the driver consists three parts: core library, PCI, and platform
drivers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit dc680b989d519952e0e0d37204fec850925a0225
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Mon Nov 10 18:52:31 2014 +0100
ARM: fix multiplatform allmodcompile
Commit 68f3b875f7848f5304472184a4634148c5330cbd
"ARM: integrator: make the Integrator multiplatform"
broke allmodconfig like this:
>> arch/arm/include/asm/cmpxchg.h:114:2: error: #error
"SMP is not supported on this platform"
(etc)
This is due to the fact that as we turned on multiplatform
for the Integrator, this enabled a lot of non-applicable
CPU's to be selected for its multiplatform images, due to
a lot of "depends on ARCH_INTEGRATOR" restrictions in
arch/arm/mm/Kconfig for the different ARM CPU types.
Fix this by restricting the CPU selections to respective
multiplatform config, which now becomes a subset of the
possible Integrator configurations, or alternatively the
non-multiplatform config plus ARCH_INTEGRATOR, i.e.:
if (!ARCH_MULTIPLATFORM || ARCH_MULTI_Vx) &&
(ARCH_INTEGRATOR || ARCH_FOO ...)
Since the Integrator has been converted to multiplatform,
this will often take the short form:
if (ARCH_MULTI_Vx && ARCH_INTEGRATOR)
If no other non-multiplatform platforms are elegible.
Reported-by: Build bot for Mark Brown <broonie@kernel.org>
Reported-by: Kbuild test robot <fengguang.wu@intel.com>
Suggested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
commit ba7a46f16dd29f93303daeb1fee8af316c5a07f4
Author: Joe Perches <joe@perches.com>
Date: Tue Nov 11 10:59:17 2014 -0800
net: Convert LIMIT_NETDEBUG to net_dbg_ratelimited
Use the more common dynamic_debug capable net_dbg_ratelimited
and remove the LIMIT_NETDEBUG macro.
All messages are still ratelimited.
Some KERN_<LEVEL> uses are changed to KERN_DEBUG.
This may have some negative impact on messages that were
emitted at KERN_INFO that are not not enabled at all unless
DEBUG is defined or dynamic_debug is enabled. Even so,
these messages are now _not_ emitted by default.
This also eliminates the use of the net_msg_warn sysctl
"/proc/sys/net/core/warnings". For backward compatibility,
the sysctl is not removed, but it has no function. The extern
declaration of net_msg_warn is removed from sock.h and made
static in net/core/sysctl_net_core.c
Miscellanea:
o Update the sysctl documentation
o Remove the embedded uses of pr_fmt
o Coalesce format fragments
o Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit e349d9d5b3f9509e6a053d9d1d9f4c7d9471c8f0
Author: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Date: Wed Nov 5 16:45:14 2014 +0530
hwmon: (ibmpowernv) Use platform 'id_table' to probe the device
The current driver probe() function assumes the sensor device to be
always present and gets executed every time if the driver is loaded,
but the appropriate hardware could not be present.
So, move the platform device creation as part of platform init code
and use the 'id_table' to check if the device is present or not.
Signed-off-by: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
commit eebb2554a0a4ce8f637c72febc883997a58093ca
Author: Guenter Roeck <linux@roeck-us.net>
Date: Sat Sep 27 08:31:12 2014 -0700
hwmon: (iio_hwmon) Add support for humidity sensors
The iio subsystem supports humidity sensors, so it makes sense
to support it in the iio-hwmon bridge as well.
Cc: Jonathan Cameron <jic23@kernel.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
commit c2827f34af5ced95daddefd7de6105d7fcf0d4d5
Author: Alan Tull <atull@opensource.altera.com>
Date: Wed Oct 15 13:55:10 2014 -0500
hwmon: (ltc2978) Add regulator support
Add simple on/off regulator support for ltc2978 and
other pmbus parts supported by the ltc2978 driver.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
commit 3ca7aa3feedc0cc838b242e09ff6b306501029d0
Author: Alan Tull <atull@opensource.altera.com>
Date: Wed Oct 15 13:55:09 2014 -0500
hwmon: (pmbus) Add regulator support
Add support for simple on/off control of each channel.
To add regulator support, the pmbus part driver needs to add
regulator_desc information and number of regulators to its
pmbus_driver_info struct.
regulator_desc can be declared using default macro for a
regulator (PMBUS_REGULATOR) that is in pmbus.h
The regulator_init_data can be initialized from either
platform data or the device tree.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
commit e94c450610a10a9b798b39754a6099fea5d5279e
Author: Alan Tull <atull@opensource.altera.com>
Date: Wed Oct 15 13:55:08 2014 -0500
hwmon: (pmbus) add helpers for byte write and read modify write
Add two helper functions:
* pmbus_write_byte_data = paged byte write
* pmbus_update_byte_data = paged byte read/modify/write
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
commit 7c6d297620427048742977c2258669f3cc926f1f
Author: Alan Tull <atull@opensource.altera.com>
Date: Wed Oct 15 13:55:07 2014 -0500
hwmon: (ltc2978) device tree bindings documentation
Add device tree bindings documentation for ltc2978.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
[Guenter Roeck: Minor correction of 'compatible' example]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
commit 5b61c4db49e2530ed10631321d4c73f49d560a93
Author: Denis Kirjanov <kda@linux-powerpc.org>
Date: Mon Nov 10 08:59:43 2014 +0300
PPC: bpf_jit_comp: add SKF_AD_HATYPE instruction
Add BPF extension SKF_AD_HATYPE to ppc JIT to check
the hw type of the interface
Before:
[ 57.723666] test_bpf: #20 LD_HATYPE
[ 57.723675] BPF filter opcode 0020 (@0) unsupported
[ 57.724168] 48 48 PASS
After:
[ 103.053184] test_bpf: #20 LD_HATYPE 7 6 PASS
CC: Alexei Starovoitov<alexei.starovoitov@gmail.com>
CC: Daniel Borkmann<dborkman@redhat.com>
CC: Philippe Bergheaud<felix@linux.vnet.ibm.com>
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
v2: address Alexei's comments
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 0bd52941586b3b59ab9b6e89e55b2dc9e2680de9
Author: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Date: Tue Nov 4 11:49:02 2014 -0600
hwmon: (fam15h_power) Fix NB device ID for F16h M30h
F3 device ID is wrongly included in fam15h_power_id_table
for F16h M30h. It should be F4 device ID. Fix this.
Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
commit 48b9d5b4f408259cd6800c4b17d4fe5025435da2
Author: Kamil Debski <k.debski@samsung.com>
Date: Mon Nov 3 15:42:55 2014 +0100
hwmon: (pwm-fan) Fix suspend/resume behavior
The state of a PWM output is not clearly defined after resume. Some PWM
drivers do not restore the duty cycle upon resume, thus it is necessary to
manually restore the correct value.
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
commit aab18da44f243cf59b4dee335ea50b32f529b5b0
Author: Michael Ellerman <mpe@ellerman.id.au>
Date: Fri Oct 31 17:45:22 2014 +1100
hwmon: (ibmpowernv) Quieten when probing finds no device
Because we build kernels with drivers built in for many platforms, it's
normal for the ibmpowernv driver to be loaded on systems that don't have
the appropriate hardware.
Currently the driver spams the log with:
ibmpowernv ibmpowernv.0: Opal node 'sensors' not found
ibmpowernv: Platfrom driver probe failed
But there is no error, this machine is not a powernv and doesn't have
the hardware. So change the sensors message to dev_dbg(), and only print
an error about the probe failing if it's not ENODEV.
Also fix the spelling of "Platfrom" and print the actual error value.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
commit a2ae6007a442d6bb27d77bf20ec1b06cda9e306e
Author: Joe Perches <joe@perches.com>
Date: Sun Nov 9 16:32:46 2014 -0800
dsa: Use netdev_<level> instead of printk
Neaten and standardize the logging output.
Other miscellanea:
o Use pr_notice_once instead of a guard flag.
o Convert existing pr_<level> uses too.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit f4a1edd56120249198073aa4a373b77e3700ac8f
Author: Or Gerlitz <ogerlitz@mellanox.com>
Date: Sun Nov 9 14:25:39 2014 +0200
net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set
Currenly we only support Large-Send and TX checksum offloads for
encapsulated traffic of type VXLAN. We must make sure to advertize
these offloads up to the stack only when VXLAN tunnel is set.
Failing to do so, would mislead the the networking stack to assume
that the driver can offload the internal TX checksum for GRE packets
and other buggy schemes.
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit f8c6455bb04b944edb69e9b074e28efee2c56bdd
Author: Shani Michaeli <shanim@mellanox.com>
Date: Sun Nov 9 13:51:53 2014 +0200
net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE
When processing received traffic, pass CHECKSUM_COMPLETE status to the
stack, with calculated checksum for non TCP/UDP packets (such
as GRE or ICMP).
Although the stack expects checksum which doesn't include the pseudo
header, the HW adds it. To address that, we are subtracting the pseudo
header checksum from the checksum value provided by the HW.
In the IPv6 case, we also compute/add the IP header checksum which
is not added by the HW for such packets.
Cc: Jerry Chu <hkchu@google.com>
Signed-off-by: Shani Michaeli <shanim@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit dd65beac48a5259945846956d4b27344dfb73bd9
Author: Shani Michaeli <shanim@mellanox.com>
Date: Sun Nov 9 13:51:52 2014 +0200
net/mlx4_en: Extend usage of napi_gro_frags
We can call napi_gro_frags for all the received traffic regardless
of the checksum status. Specifically, received packets whose status
is CHECKSUM_NONE (and soon to be added CHECKSUM_COMPLETE)
are eligible for napi_gro_frags as well.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Shani Michaeli <shanim@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 242fe7a1fd7af133d4c0ae2aae1de4e33b1b39af
Author: Rafał Miłecki <zajec5@gmail.com>
Date: Wed Sep 3 07:36:51 2014 +0200
MIPS: Fix info about plat_setup in arch_mem_init comment
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7607/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 5996d33df117bc3c56c28d6a930679ddcb693626
Author: Rafał Miłecki <zajec5@gmail.com>
Date: Thu Oct 30 12:50:03 2014 +0100
MIPS: BCM47XX: Clean up nvram header
1) Move private defines to the .c file
2) Move SPROM helper to the sprom.c
3) Drop unused code
4) Rename magic to the NVRAM_MAGIC
5) Add const to the char pointer we never modify
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8289/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 1bb002b25f08e7e295b2c16dfc09a4cefc3cc5db
Author: Rafał Miłecki <zajec5@gmail.com>
Date: Wed Oct 29 10:05:06 2014 +0100
MIPS: BCM47XX: Use mtd as an alternative way/API to get NVRAM content
NVRAM can be read using magic memory offset, but after all it's just a
flash partition. On platforms where NVRAM isn't needed early we can get
it using mtd subsystem.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8266/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 2a90d4aae5509e9cf1ba848c5d0b3458201160a0
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Fri Nov 7 23:04:00 2014 +0100
blk-mq: use get_cpu/put_cpu instead of preempt_disable/preempt_enable
blk-mq is using preempt_disable/enable in order to ensure that the
queue runners are placed on the right CPU. This does not work with
the RT patches, because __blk_mq_run_hw_queue takes a non-raw
spinlock with the preemption-disabled region. If there is contention
on the lock, this violates the rules for preemption-disabled regions.
While this should be easily fixable within the RT patches just by doing
migrate_disable/enable, we can do better and document _why_ this
particular region runs with disabled preemption. After the previous
patch, it is trivial to switch it to get/put_cpu; the RT patches then
can change it to get_cpu_light, which lets virtio-blk run under RT
kernels.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Clark Williams <williams@redhat.com>
Tested-by: Clark Williams <williams@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 398205b8391b208f0034a392242867b28ad8af3d
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Fri Nov 7 23:03:59 2014 +0100
blk_mq: call preempt_disable/enable in blk_mq_run_hw_queue, and only if needed
preempt_disable/enable surrounds every call to blk_mq_run_hw_queue,
except the one in blk-flush.c. In fact that one is always asynchronous,
and it does not need smp_processor_id().
We can do the same for all other calls, avoiding preempt_disable when
async is true. This avoids peppering blk-mq.c with preemption-disabled
regions.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Clark Williams <williams@redhat.com>
Tested-by: Clark Williams <williams@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 9169051617df7fca597274e9e43324332cb8f0ee
Author: Mark Brown <broonie@kernel.org>
Date: Sat Nov 8 10:28:10 2014 +0000
spi: spidev: Don't mangle max_speed_hz in underlying spi device
Currently spidev allows callers to set the default speed by overriding the
max_speed_hz in the underlying device. This achieves the immediate goal but
is not what devices expect and can easily lead to userspace trying to set
unsupported speeds and succeeding, apart from anything else drivers can't
set a limit on the speed using max_speed_hz as they'd expect and any other
devices on the bus will be affected.
Instead store the default speed in the spidev struct and fill this in on
each transfer.
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 2c8c56e15df3d4c2af3d656e44feb18789f75837
Author: Eric Dumazet <edumazet@google.com>
Date: Tue Nov 11 05:54:28 2014 -0800
net: introduce SO_INCOMING_CPU
Alternative to RPS/RFS is to use hardware support for multiple
queues.
Then split a set of million of sockets into worker threads, each
one using epoll() to manage events on its own socket pool.
Ideally, we want one thread per RX/TX queue/cpu, but we have no way to
know after accept() or connect() on which queue/cpu a socket is managed.
We normally use one cpu per RX queue (IRQ smp_affinity being properly
set), so remembering on socket structure which cpu delivered last packet
is enough to solve the problem.
After accept(), connect(), or even file descriptor passing around
processes, applications can use :
int cpu;
socklen_t len = sizeof(cpu);
getsockopt(fd, SOL_SOCKET, SO_INCOMING_CPU, &cpu, &len);
And use this information to put the socket into the right silo
for optimal performance, as all networking stack should run
on the appropriate cpu, without need to send IPI (RPS/RFS).
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 3d97379a67486bc481ab5b8f7aa5b7ceb6154a95
Author: Eric Dumazet <edumazet@google.com>
Date: Tue Nov 11 05:54:27 2014 -0800
tcp: move sk_mark_napi_id() at the right place
sk_mark_napi_id() is used to record for a flow napi id of incoming
packets for busypoll sake.
We should do this only on established flows, not on listeners.
This was 'working' by virtue of the socket cloning, but doing
this on SYN packets in unecessary cache line dirtying.
Even if we move sk_napi_id in the same cache line than sk_lock,
we are working to make SYN processing lockless, so it is desirable
to set sk_napi_id only for established flows.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 26488b3723270880a28b542ff2276689506d6a9f
Author: Jiang Liu <jiang.liu@huawei.com>
Date: Thu Aug 22 20:59:39 2013 +0800
tracing: Add entry->next_cpu to trace_ctxwake_bin()
Function trace_ctxwake_bin() misses ctx_switch_entry->next_cpu field,
so user will get stale value for "next_cpu".
Link: http://lkml.kernel.org/p/1377176379-27908-1-git-send-email-liuj97@gmail.com
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
commit 243f7610a68a606eb1787c09450a440bf30bebe0
Author: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
Date: Thu Oct 30 20:44:53 2014 -0400
tracing: Move tracing_sched_{switch,wakeup}() into wakeup tracer
The only code that references tracing_sched_switch_trace() and
tracing_sched_wakeup_trace() is the wakeup latency tracer. Those
two functions use to belong to the sched_switch tracer which has
long been removed. These functions were left behind because the
wakeup latency tracer used them. But since the wakeup latency tracer
is the only one to use them, they should be static functions inside
that code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
commit 458faf0b88b19a46d51bb9760fa6e03a1bc6d97b
Author: Oleg Nesterov <oleg@redhat.com>
Date: Wed Jul 23 21:35:03 2014 +0200
tracing: Kill the dead code in probe_sched_switch() and probe_sched_wakeup()
After the previous patch it is clear that "tracer_enabled" can never be
true, we can remove the "if (tracer_enabled)" code in probe_sched_switch()
and probe_sched_wakeup(). Plus we can obviously remove tracer_enabled,
ctx_trace, and sched_stopped as well.
Link: http://lkml.kernel.org/p/20140723193503.GA30217@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
commit 632537256e9f969a188cc4d0159e0027a459d3e7
Author: Oleg Nesterov <oleg@redhat.com>
Date: Wed Jul 23 21:35:01 2014 +0200
tracing: Kill tracing_{start,stop}_sched_switch_record() and tracing_sched_switch_assign_trace()
tracing_{start,stop}_sched_switch_record() have no callers since
87d80de2800d "tracing: Remove obsolete sched_switch tracer".
The last caller of tracing_sched_switch_assign_trace() was removed
by 30dbb20e68e6 "tracing: Remove boot tracer".
Link: http://lkml.kernel.org/p/20140723193501.GA30214@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
commit 4fd3279b48605ae3ea509b9b2c02e46aa0975930
Author: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
Date: Fri Oct 24 17:56:04 2014 -0400
ftrace: Add more information to ftrace_bug() output
With the introduction of the dynamic trampolines, it is useful that if
things go wrong that ftrace_bug() produces more information about what
the current state is. This can help debug issues that may arise.
Ftrace has lots of checks to make sure that the state of the system it
touchs is exactly what it expects it to be. When it detects an abnormality
it calls ftrace_bug() and disables itself to prevent any further damage.
It is crucial that ftrace_bug() produces sufficient information that
can be used to debug the situation.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
commit 12cce594fa8f12e002e7eb5d10141853c1e6a112
Author: Steven Rostedt (Red Hat) <rostedt@goodmis.org>
Date: Thu Jul 3 15:48:16 2014 -0400
ftrace/x86: Allow !CONFIG_PREEMPT dynamic ops to use allocated trampolines
When the static ftrace_ops (like function tracer) enables tracing, and it
is the only callback that is referencing a function, a trampoline is
dynamically allocated to the function that calls the callback directly
instead of calling a loop function that iterates over all the registered
ftrace ops (if more than one ops is registered).
But when it comes to dynamically allocated ftrace_ops, where they may be
freed, on a CONFIG_PREEMPT kernel there's no way to know when it is safe
to free the trampoline. If a task was preempted while executing on the
trampoline, there's currently no way to know when it will be off that
trampoline.
But this is not true when it comes to !CONFIG_PREEMPT. The current method
of calling schedule_on_each_cpu() will force tasks off the trampoline,
becaues they can not schedule while on it (kernel preemption is not
configured). That means it is safe to free a dynamically allocated
ftrace ops trampoline when CONFIG_PREEMPT is not configured.
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
commit 19ca5a3cc425cc9a8abedb0f4fb7b4e7ceee2255
Author: Andreas Ruprecht <rupran@einserver.de>
Date: Sun Aug 10 21:10:03 2014 +0200
EDAC, pci_sysfs: remove unneccessary ifdef around entire file
The file edac_pci_sysfs.c is dependent on CONFIG_PCI. This is already
modelled in the Makefile, but edac_pci_sysfs.o is still contained in
the list of files compiled even without CONFIG_PCI.
This change removes edac_pci_sysfs.o from the list of built objects
when not having CONFIG_PCI enabled and removes the then-unnecessary
ifdef from the source file.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Link: http://lkml.kernel.org/r/1407697803-3837-1-git-send-email-rupran@einserver.de
Signed-off-by: Borislav Petkov <bp@suse.de>
commit 419a2ea074189be8de0b0ab052dd98061fed1c16
Author: Mike Snitzer <snitzer@redhat.com>
Date: Tue Oct 28 20:58:45 2014 -0400
dm thin: suspend/resume active thin devices when reloading thin-pool
Before this change it was expected that userspace would first suspend
all active thin devices, reload/resize the thin-pool target, then resume
all active thin devices. Now the thin-pool suspend/resume will trigger
the suspend/resume of all active thins via appropriate calls to
dm_internal_suspend and dm_internal_resume.
Store the mapped_device for each thin device in struct thin_c to make
these calls possible.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
commit 665aa8cdc499b9aeea6532e682a58ca34b7f94e6
Author: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri Aug 1 11:25:14 2014 +0300
ghes_edac: Use snprintf() to silence a static checker warning
My static checker complains because the "e->location" has up to 256
characters but we are copying it into the "pvt->detail_location" which
only has space for 240 characters. That's not counting the surrounding
text and the "e->other_detail" string which can be over 80 characters
long.
I am not familiar with this code but presumably it normally works.
Let's add a limit though for safety.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Link: http://lkml.kernel.org/r/20140801082514.GD28869@mwanda
Signed-off-by: Borislav Petkov <bp@suse.de>
commit 8860704ea9afa699484c9fe7822da1cd37e40690
Author: Mike Snitzer <snitzer@redhat.com>
Date: Tue Oct 28 18:34:52 2014 -0400
dm: enhance internal suspend and resume interface
Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast
-- dm-stats will continue using these methods to avoid all the extra
suspend/resume logic that is not needed in order to quickly flush IO.
Introduce dm_internal_suspend_noflush() variant that actually calls the
mapped_device's target callbacks -- otherwise target-specific hooks are
avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common
code between dm_internal_{suspend_noflush,resume} and
dm_{suspend,resume} was factored out as __dm_{suspend,resume}.
Update dm_internal_{suspend_noflush,resume} to always take and release
the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be
aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond
accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to
be cleared. Add lockdep annotation to dm_suspend() and dm_resume().
Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new
DM_INTERNAL_SUSPEND_FLAG state is being tracked/reported to assist with
debugging (e.g. 'dmsetup info' will report an internally suspended
device accordingly).
The existing DM_SUSPEND_FLAG remains unchanged.
DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and
cleared by dm_internal_resume().
Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device
was already suspended when dm_internal_suspend_noflush() was called --
this can be thought of as a "nested suspend". A "nested suspend" can
with legacy userspace dm-thin code that might suspend all active thin
volumes before suspending the pool for resize.
But otherwise, in the normal dm-thin-pool suspend case moving forward:
the thin-pool will have DM_SUSPEND_FLAG set and all active thins from
that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
commit bf735ebb898c1348f635488bee737b95886aa20e
Author: Mike Snitzer <snitzer@redhat.com>
Date: Fri Nov 7 15:09:46 2014 -0500
dm thin: do not allow thin device activation while pool is suspended
Otherwise IO could be issued to the pool while it is suspended.
Care was taken to properly interlock between the thin and thin-pool
targets when accessing the pool's 'suspended' flag.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
commit 3ca4517dc53569ad82152ff035be0e909c06c722
Author: Mike Snitzer <snitzer@redhat.com>
Date: Tue Oct 28 20:13:31 2014 -0400
dm: add presuspend_undo hook to target_type
The DM thin-pool target now must undo the changes performed during
pool_presuspend() so introduce presuspend_undo hook in target_type.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
commit f35d0679e47ef97c6037f7aefba41f18a7865421
Author: Mike Snitzer <snitzer@redhat.com>
Date: Fri Nov 7 15:27:56 2014 -0500
dm thin: remove stale 'trim' message in block comment above pool_message
Signed-off-by: M…
dongsupark
pushed a commit
to dongsupark/linux
that referenced
this pull request
Dec 12, 2014
Writing blocks or syncing on ext4 rootfs has caused a lockup with the following call trace. Fix that by converting the original segment traversal into a page-based iteration in ext4_finish_bio(): [ 480.751901] INFO: task sync:4424 blocked for more than 120 seconds. [ 480.753064] Not tainted 3.18.0-00025-g46c8231 torvalds#39 [ 480.753720] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 480.754737] sync D ffff88001fc11180 0 4424 4338 0x00000000 [ 480.755719] ffff88001cdfbc98 0000000000000086 ffff88001cdfbba8 ffff880014adefc0 [ 480.756810] 0000000000011180 0000000000004000 ffffffff81813460 ffff880014adefc0 [ 480.758102] ffff88001cdfbbc8 ffffffff812f08be ffff88001cdfbc18 ffff880014adf028 [ 480.759454] Call Trace: [ 480.759852] [<ffffffff812f08be>] ? debug_smp_processor_id+0x17/0x19 [ 480.760609] [<ffffffff8106093e>] ? __enqueue_entity+0x69/0x6b [ 480.761318] [<ffffffff8106017e>] ? __dequeue_entity+0x33/0x38 [ 480.762026] [<ffffffff810601ab>] ? set_next_entity+0x28/0x7d [ 480.762739] [<ffffffff8105a4fb>] ? get_parent_ip+0xf/0x3f [ 480.763425] [<ffffffff8108562b>] ? ktime_get+0x50/0x8f [ 480.763848] [<ffffffff8148abdb>] ? bit_wait_timeout+0x60/0x60 [ 480.764555] [<ffffffff8148a6be>] schedule+0x6a/0x6c [ 480.765186] [<ffffffff8148a74f>] io_schedule+0x8f/0xcd [ 480.765841] [<ffffffff8148ac19>] bit_wait_io+0x3e/0x42 [ 480.766493] [<ffffffff8148ae80>] __wait_on_bit+0x4d/0x86 [ 480.767183] [<ffffffff810d4302>] ? find_get_pages_tag+0x106/0x133 [ 480.767847] [<ffffffff810d4a63>] wait_on_page_bit+0x76/0x78 [ 480.768532] [<ffffffff8106ab59>] ? wake_atomic_t_function+0x2d/0x2d [ 480.769262] [<ffffffff810d511f>] filemap_fdatawait_range+0x7e/0x11d [ 480.769992] [<ffffffff8148a639>] ? preempt_schedule+0x36/0x51 [ 480.770677] [<ffffffff8105a4fb>] ? get_parent_ip+0xf/0x3f [ 480.771848] [<ffffffff810d51df>] filemap_fdatawait+0x21/0x23 [ 480.772530] [<ffffffff811458ce>] sync_inodes_sb+0x158/0x1aa [ 480.773201] [<ffffffff81480303>] ? br_mdb_dump+0x225/0x495 [ 480.773885] [<ffffffff81149ad8>] ? fdatawrite_one_bdev+0x18/0x18 [ 480.774592] [<ffffffff81149aec>] sync_inodes_one_sb+0x14/0x16 [ 480.775278] [<ffffffff81125937>] iterate_supers+0x6f/0xc4 [ 480.775847] [<ffffffff81149bf4>] sys_sync+0x35/0x83 [ 480.776460] [<ffffffff8148da52>] system_call_fastpath+0x12/0x17 Reported-by: Ming Lin <mlin@minggr.net> Signed-off-by: Kent Overstreet <kmo@daterainc.com>
dongsupark
pushed a commit
to dongsupark/linux
that referenced
this pull request
Dec 23, 2014
Writing blocks or syncing on ext4 rootfs has caused a lockup with the following call trace. Fix that by converting the original segment traversal into a page-based iteration in ext4_finish_bio(): [ 480.751901] INFO: task sync:4424 blocked for more than 120 seconds. [ 480.753064] Not tainted 3.18.0-00025-g46c8231 torvalds#39 [ 480.753720] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 480.754737] sync D ffff88001fc11180 0 4424 4338 0x00000000 [ 480.755719] ffff88001cdfbc98 0000000000000086 ffff88001cdfbba8 ffff880014adefc0 [ 480.756810] 0000000000011180 0000000000004000 ffffffff81813460 ffff880014adefc0 [ 480.758102] ffff88001cdfbbc8 ffffffff812f08be ffff88001cdfbc18 ffff880014adf028 [ 480.759454] Call Trace: [ 480.759852] [<ffffffff812f08be>] ? debug_smp_processor_id+0x17/0x19 [ 480.760609] [<ffffffff8106093e>] ? __enqueue_entity+0x69/0x6b [ 480.761318] [<ffffffff8106017e>] ? __dequeue_entity+0x33/0x38 [ 480.762026] [<ffffffff810601ab>] ? set_next_entity+0x28/0x7d [ 480.762739] [<ffffffff8105a4fb>] ? get_parent_ip+0xf/0x3f [ 480.763425] [<ffffffff8108562b>] ? ktime_get+0x50/0x8f [ 480.763848] [<ffffffff8148abdb>] ? bit_wait_timeout+0x60/0x60 [ 480.764555] [<ffffffff8148a6be>] schedule+0x6a/0x6c [ 480.765186] [<ffffffff8148a74f>] io_schedule+0x8f/0xcd [ 480.765841] [<ffffffff8148ac19>] bit_wait_io+0x3e/0x42 [ 480.766493] [<ffffffff8148ae80>] __wait_on_bit+0x4d/0x86 [ 480.767183] [<ffffffff810d4302>] ? find_get_pages_tag+0x106/0x133 [ 480.767847] [<ffffffff810d4a63>] wait_on_page_bit+0x76/0x78 [ 480.768532] [<ffffffff8106ab59>] ? wake_atomic_t_function+0x2d/0x2d [ 480.769262] [<ffffffff810d511f>] filemap_fdatawait_range+0x7e/0x11d [ 480.769992] [<ffffffff8148a639>] ? preempt_schedule+0x36/0x51 [ 480.770677] [<ffffffff8105a4fb>] ? get_parent_ip+0xf/0x3f [ 480.771848] [<ffffffff810d51df>] filemap_fdatawait+0x21/0x23 [ 480.772530] [<ffffffff811458ce>] sync_inodes_sb+0x158/0x1aa [ 480.773201] [<ffffffff81480303>] ? br_mdb_dump+0x225/0x495 [ 480.773885] [<ffffffff81149ad8>] ? fdatawrite_one_bdev+0x18/0x18 [ 480.774592] [<ffffffff81149aec>] sync_inodes_one_sb+0x14/0x16 [ 480.775278] [<ffffffff81125937>] iterate_supers+0x6f/0xc4 [ 480.775847] [<ffffffff81149bf4>] sys_sync+0x35/0x83 [ 480.776460] [<ffffffff8148da52>] system_call_fastpath+0x12/0x17 Reported-by: Ming Lin <mlin@minggr.net> Signed-off-by: Kent Overstreet <kmo@daterainc.com>
dongsupark
pushed a commit
to dongsupark/linux
that referenced
this pull request
Dec 29, 2014
Writing blocks or syncing on ext4 rootfs has caused a lockup with the following call trace. Fix that by converting the original segment traversal into a page-based iteration in ext4_finish_bio(): [ 480.751901] INFO: task sync:4424 blocked for more than 120 seconds. [ 480.753064] Not tainted 3.18.0-00025-g46c8231 torvalds#39 [ 480.753720] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 480.754737] sync D ffff88001fc11180 0 4424 4338 0x00000000 [ 480.755719] ffff88001cdfbc98 0000000000000086 ffff88001cdfbba8 ffff880014adefc0 [ 480.756810] 0000000000011180 0000000000004000 ffffffff81813460 ffff880014adefc0 [ 480.758102] ffff88001cdfbbc8 ffffffff812f08be ffff88001cdfbc18 ffff880014adf028 [ 480.759454] Call Trace: [ 480.759852] [<ffffffff812f08be>] ? debug_smp_processor_id+0x17/0x19 [ 480.760609] [<ffffffff8106093e>] ? __enqueue_entity+0x69/0x6b [ 480.761318] [<ffffffff8106017e>] ? __dequeue_entity+0x33/0x38 [ 480.762026] [<ffffffff810601ab>] ? set_next_entity+0x28/0x7d [ 480.762739] [<ffffffff8105a4fb>] ? get_parent_ip+0xf/0x3f [ 480.763425] [<ffffffff8108562b>] ? ktime_get+0x50/0x8f [ 480.763848] [<ffffffff8148abdb>] ? bit_wait_timeout+0x60/0x60 [ 480.764555] [<ffffffff8148a6be>] schedule+0x6a/0x6c [ 480.765186] [<ffffffff8148a74f>] io_schedule+0x8f/0xcd [ 480.765841] [<ffffffff8148ac19>] bit_wait_io+0x3e/0x42 [ 480.766493] [<ffffffff8148ae80>] __wait_on_bit+0x4d/0x86 [ 480.767183] [<ffffffff810d4302>] ? find_get_pages_tag+0x106/0x133 [ 480.767847] [<ffffffff810d4a63>] wait_on_page_bit+0x76/0x78 [ 480.768532] [<ffffffff8106ab59>] ? wake_atomic_t_function+0x2d/0x2d [ 480.769262] [<ffffffff810d511f>] filemap_fdatawait_range+0x7e/0x11d [ 480.769992] [<ffffffff8148a639>] ? preempt_schedule+0x36/0x51 [ 480.770677] [<ffffffff8105a4fb>] ? get_parent_ip+0xf/0x3f [ 480.771848] [<ffffffff810d51df>] filemap_fdatawait+0x21/0x23 [ 480.772530] [<ffffffff811458ce>] sync_inodes_sb+0x158/0x1aa [ 480.773201] [<ffffffff81480303>] ? br_mdb_dump+0x225/0x495 [ 480.773885] [<ffffffff81149ad8>] ? fdatawrite_one_bdev+0x18/0x18 [ 480.774592] [<ffffffff81149aec>] sync_inodes_one_sb+0x14/0x16 [ 480.775278] [<ffffffff81125937>] iterate_supers+0x6f/0xc4 [ 480.775847] [<ffffffff81149bf4>] sys_sync+0x35/0x83 [ 480.776460] [<ffffffff8148da52>] system_call_fastpath+0x12/0x17 Reported-by: Ming Lin <mlin@minggr.net> Signed-off-by: Kent Overstreet <kmo@daterainc.com>
dongsupark
pushed a commit
to dongsupark/linux
that referenced
this pull request
Jan 12, 2015
Writing blocks or syncing on ext4 rootfs has caused a lockup with the following call trace. Fix that by converting the original segment traversal into a page-based iteration in ext4_finish_bio(): [ 480.751901] INFO: task sync:4424 blocked for more than 120 seconds. [ 480.753064] Not tainted 3.18.0-00025-g46c8231 torvalds#39 [ 480.753720] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 480.754737] sync D ffff88001fc11180 0 4424 4338 0x00000000 [ 480.755719] ffff88001cdfbc98 0000000000000086 ffff88001cdfbba8 ffff880014adefc0 [ 480.756810] 0000000000011180 0000000000004000 ffffffff81813460 ffff880014adefc0 [ 480.758102] ffff88001cdfbbc8 ffffffff812f08be ffff88001cdfbc18 ffff880014adf028 [ 480.759454] Call Trace: [ 480.759852] [<ffffffff812f08be>] ? debug_smp_processor_id+0x17/0x19 [ 480.760609] [<ffffffff8106093e>] ? __enqueue_entity+0x69/0x6b [ 480.761318] [<ffffffff8106017e>] ? __dequeue_entity+0x33/0x38 [ 480.762026] [<ffffffff810601ab>] ? set_next_entity+0x28/0x7d [ 480.762739] [<ffffffff8105a4fb>] ? get_parent_ip+0xf/0x3f [ 480.763425] [<ffffffff8108562b>] ? ktime_get+0x50/0x8f [ 480.763848] [<ffffffff8148abdb>] ? bit_wait_timeout+0x60/0x60 [ 480.764555] [<ffffffff8148a6be>] schedule+0x6a/0x6c [ 480.765186] [<ffffffff8148a74f>] io_schedule+0x8f/0xcd [ 480.765841] [<ffffffff8148ac19>] bit_wait_io+0x3e/0x42 [ 480.766493] [<ffffffff8148ae80>] __wait_on_bit+0x4d/0x86 [ 480.767183] [<ffffffff810d4302>] ? find_get_pages_tag+0x106/0x133 [ 480.767847] [<ffffffff810d4a63>] wait_on_page_bit+0x76/0x78 [ 480.768532] [<ffffffff8106ab59>] ? wake_atomic_t_function+0x2d/0x2d [ 480.769262] [<ffffffff810d511f>] filemap_fdatawait_range+0x7e/0x11d [ 480.769992] [<ffffffff8148a639>] ? preempt_schedule+0x36/0x51 [ 480.770677] [<ffffffff8105a4fb>] ? get_parent_ip+0xf/0x3f [ 480.771848] [<ffffffff810d51df>] filemap_fdatawait+0x21/0x23 [ 480.772530] [<ffffffff811458ce>] sync_inodes_sb+0x158/0x1aa [ 480.773201] [<ffffffff81480303>] ? br_mdb_dump+0x225/0x495 [ 480.773885] [<ffffffff81149ad8>] ? fdatawrite_one_bdev+0x18/0x18 [ 480.774592] [<ffffffff81149aec>] sync_inodes_one_sb+0x14/0x16 [ 480.775278] [<ffffffff81125937>] iterate_supers+0x6f/0xc4 [ 480.775847] [<ffffffff81149bf4>] sys_sync+0x35/0x83 [ 480.776460] [<ffffffff8148da52>] system_call_fastpath+0x12/0x17 Reported-by: Ming Lin <mlin@minggr.net> Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Imroy
pushed a commit
to Imroy/linux
that referenced
this pull request
Feb 21, 2015
Movable allocation requests can get CMA memory. CMA memory is mapped as non-cached normal memory. f2fs code can perform test_bit operations on the memory allocated, which inturn uses ldr/str exclusive instuctions on ARM. ldr/str exclusive instructions casue unhandled exceptions and kernel panics. [ 6934.858377] Unhandled fault: unknown 53 (0x96000035) at 0xffffffc0699c1000 [ 6934.866608] Internal error: : 96000035 [#1] PREEMPT SMP [ 6934.871883] CPU: 1 PID: 666 Comm: LazyTaskWriterT Tainted: G W 3.10.40-g3bdd559-dirty torvalds#39 [ 6934.880975] task: ffffffc06079a040 ti: ffffffc02a7bc000 task.ti: ffffffc02a7bc000 [ 6934.888565] PC is at test_and_clear_bit+0x14/0x40 [ 6934.893304] LR is at f2fs_delete_entry+0xd8/0x28c Bug 1550455 Change-Id: I9645296a052301820063b9737bf06c8c9e059986 Signed-off-by: Krishna Reddy <vdumpa@nvidia.com> Reviewed-on: http://git-master/r/533926 GVS: Gerrit_Virtual_Submit Reviewed-by: Prajakta Gudadhe <pgudadhe@nvidia.com>
jonhunter
pushed a commit
to jonhunter/linux
that referenced
this pull request
May 1, 2015
memset() to 0 interfaces array before reusing usb_configuration structure. This commit fix bug: ln -s functions/acm.1 configs/c.1 ln -s functions/acm.2 configs/c.1 ln -s functions/acm.3 configs/c.1 echo "UDC name" > UDC echo "" > UDC rm configs/c.1/acm.* rmdir functions/* mkdir functions/ecm.usb0 ln -s functions/ecm.usb0 configs/c.1 echo "UDC name" > UDC [ 82.220969] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 82.229009] pgd = c0004000 [ 82.231698] [00000000] *pgd=00000000 [ 82.235260] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 82.240638] Modules linked in: [ 82.243681] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.0.0-rc2 torvalds#39 [ 82.249926] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 82.256003] task: c07cd2f0 ti: c07c8000 task.ti: c07c8000 [ 82.261393] PC is at composite_setup+0xe3c/0x1674 [ 82.266073] LR is at composite_setup+0xf20/0x1674 [ 82.270760] pc : [<c03510d4>] lr : [<c03511b8>] psr: 600001d3 [ 82.270760] sp : c07c9df0 ip : c0806448 fp : ed8c9c9c [ 82.282216] r10: 00000001 r9 : 00000000 r8 : edaae918 [ 82.287425] r7 : ed551cc0 r6 : 00007fff r5 : 00000000 r4 : ed799634 [ 82.293934] r3 : 00000003 r2 : 00010002 r1 : edaae918 r0 : 0000002e [ 82.300446] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 82.307910] Control: 10c5387d Table: 6bc1804a DAC: 00000015 [ 82.313638] Process swapper/0 (pid: 0, stack limit = 0xc07c8210) [ 82.319627] Stack: (0xc07c9df0 to 0xc07ca000) [ 82.323969] 9de0: 00000000 c06e65f4 00000000 c07c9f68 [ 82.332130] 9e00: 00000067 c07c59ac 000003f7 edaae918 ed8c9c98 ed799690 eca2f140 200001d3 [ 82.340289] 9e20: ee79a2d8 c07c9e88 c07c5304 ffff55db 00010002 edaae810 edaae860 eda96d50 [ 82.348448] 9e40: 00000009 ee264510 00000007 c07ca444 edaae860 c0340890 c0827a40 ffff55e0 [ 82.356607] 9e60: c0827a40 eda96e40 ee264510 edaae810 00000000 edaae860 00000007 c07ca444 [ 82.364766] 9e80: edaae860 c0354170 c03407dc c033db4c edaae810 00000000 00000000 00000010 [ 82.372925] 9ea0: 00000032 c0341670 00000000 00000000 00000001 eda96e00 00000000 00000000 [ 82.381084] 9ec0: 00000000 00000032 c0803a23 ee1aa840 00000001 c005d54c 249e2450 00000000 [ 82.389244] 9ee0: 200001d3 ee1aa840 ee1aa8a0 ed84f4c0 00000000 c07c9f68 00000067 c07c59ac [ 82.397403] 9f00: 00000000 c005d688 ee1aa840 ee1aa8a0 c07db4b4 c006009c 00000032 00000000 [ 82.405562] 9f20: 00000001 c005ce20 c07c59ac c005cf34 f002000c c07ca780 c07c9f68 00000057 [ 82.413722] 9f40: f0020000 413fc090 00000001 c00086b4 c000f804 60000053 ffffffff c07c9f9c [ 82.421880] 9f60: c0803a20 c0011fc0 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c [ 82.430040] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0 [ 82.438199] 9fa0: c000f800 c000f804 60000053 ffffffff 00000000 c0050e70 c0803bc0 c0783bd8 [ 82.446358] 9fc0: ffffffff ffffffff c0783664 00000000 00000000 c07b13e8 00000000 c0803e54 [ 82.454517] 9fe0: c07ca480 c07b13e4 c07ce40c 4000406a 00000000 40008074 00000000 00000000 [ 82.462689] [<c03510d4>] (composite_setup) from [<c0340890>] (s3c_hsotg_complete_setup+0xb4/0x418) [ 82.471626] [<c0340890>] (s3c_hsotg_complete_setup) from [<c0354170>] (usb_gadget_giveback_request+0xc/0x10) [ 82.481429] [<c0354170>] (usb_gadget_giveback_request) from [<c033db4c>] (s3c_hsotg_complete_request+0xcc/0x12c) [ 82.491583] [<c033db4c>] (s3c_hsotg_complete_request) from [<c0341670>] (s3c_hsotg_irq+0x4fc/0x558) [ 82.500614] [<c0341670>] (s3c_hsotg_irq) from [<c005d54c>] (handle_irq_event_percpu+0x50/0x150) [ 82.509291] [<c005d54c>] (handle_irq_event_percpu) from [<c005d688>] (handle_irq_event+0x3c/0x5c) [ 82.518145] [<c005d688>] (handle_irq_event) from [<c006009c>] (handle_fasteoi_irq+0xd4/0x18c) [ 82.526650] [<c006009c>] (handle_fasteoi_irq) from [<c005ce20>] (generic_handle_irq+0x20/0x30) [ 82.535242] [<c005ce20>] (generic_handle_irq) from [<c005cf34>] (__handle_domain_irq+0x6c/0xdc) [ 82.543923] [<c005cf34>] (__handle_domain_irq) from [<c00086b4>] (gic_handle_irq+0x2c/0x6c) [ 82.552256] [<c00086b4>] (gic_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x74) [ 82.559716] Exception stack(0xc07c9f68 to 0xc07c9fb0) [ 82.564753] 9f60: 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c [ 82.572913] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0 [ 82.581069] 9fa0: c000f800 c000f804 60000053 ffffffff [ 82.586113] [<c0011fc0>] (__irq_svc) from [<c000f804>] (arch_cpu_idle+0x30/0x3c) [ 82.593491] [<c000f804>] (arch_cpu_idle) from [<c0050e70>] (cpu_startup_entry+0x128/0x1a4) [ 82.601740] [<c0050e70>] (cpu_startup_entry) from [<c0783bd8>] (start_kernel+0x350/0x3bc) [ 82.609890] Code: 0a000002 e3530005 05975010 15975008 (e5953000) [ 82.615965] ---[ end trace f57d5f599a5f1bfa ]--- Most of kernel code assume that interface array in struct usb_configuration is NULL terminated. When gadget is composed with configfs configuration structure may be reused for different functions set. This bug happens because purge_configs_funcs() sets only next_interface_id to 0. Interface array still contains pointers to already freed interfaces. If in second try we add less interfaces than earlier we may access unallocated memory when trying to get interface descriptors. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Felipe Balbi <balbi@ti.com>
marxin
pushed a commit
to marxin/linux
that referenced
this pull request
May 26, 2015
memset() to 0 interfaces array before reusing usb_configuration structure. This commit fix bug: ln -s functions/acm.1 configs/c.1 ln -s functions/acm.2 configs/c.1 ln -s functions/acm.3 configs/c.1 echo "UDC name" > UDC echo "" > UDC rm configs/c.1/acm.* rmdir functions/* mkdir functions/ecm.usb0 ln -s functions/ecm.usb0 configs/c.1 echo "UDC name" > UDC [ 82.220969] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 82.229009] pgd = c0004000 [ 82.231698] [00000000] *pgd=00000000 [ 82.235260] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 82.240638] Modules linked in: [ 82.243681] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.0.0-rc2 torvalds#39 [ 82.249926] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 82.256003] task: c07cd2f0 ti: c07c8000 task.ti: c07c8000 [ 82.261393] PC is at composite_setup+0xe3c/0x1674 [ 82.266073] LR is at composite_setup+0xf20/0x1674 [ 82.270760] pc : [<c03510d4>] lr : [<c03511b8>] psr: 600001d3 [ 82.270760] sp : c07c9df0 ip : c0806448 fp : ed8c9c9c [ 82.282216] r10: 00000001 r9 : 00000000 r8 : edaae918 [ 82.287425] r7 : ed551cc0 r6 : 00007fff r5 : 00000000 r4 : ed799634 [ 82.293934] r3 : 00000003 r2 : 00010002 r1 : edaae918 r0 : 0000002e [ 82.300446] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 82.307910] Control: 10c5387d Table: 6bc1804a DAC: 00000015 [ 82.313638] Process swapper/0 (pid: 0, stack limit = 0xc07c8210) [ 82.319627] Stack: (0xc07c9df0 to 0xc07ca000) [ 82.323969] 9de0: 00000000 c06e65f4 00000000 c07c9f68 [ 82.332130] 9e00: 00000067 c07c59ac 000003f7 edaae918 ed8c9c98 ed799690 eca2f140 200001d3 [ 82.340289] 9e20: ee79a2d8 c07c9e88 c07c5304 ffff55db 00010002 edaae810 edaae860 eda96d50 [ 82.348448] 9e40: 00000009 ee264510 00000007 c07ca444 edaae860 c0340890 c0827a40 ffff55e0 [ 82.356607] 9e60: c0827a40 eda96e40 ee264510 edaae810 00000000 edaae860 00000007 c07ca444 [ 82.364766] 9e80: edaae860 c0354170 c03407dc c033db4c edaae810 00000000 00000000 00000010 [ 82.372925] 9ea0: 00000032 c0341670 00000000 00000000 00000001 eda96e00 00000000 00000000 [ 82.381084] 9ec0: 00000000 00000032 c0803a23 ee1aa840 00000001 c005d54c 249e2450 00000000 [ 82.389244] 9ee0: 200001d3 ee1aa840 ee1aa8a0 ed84f4c0 00000000 c07c9f68 00000067 c07c59ac [ 82.397403] 9f00: 00000000 c005d688 ee1aa840 ee1aa8a0 c07db4b4 c006009c 00000032 00000000 [ 82.405562] 9f20: 00000001 c005ce20 c07c59ac c005cf34 f002000c c07ca780 c07c9f68 00000057 [ 82.413722] 9f40: f0020000 413fc090 00000001 c00086b4 c000f804 60000053 ffffffff c07c9f9c [ 82.421880] 9f60: c0803a20 c0011fc0 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c [ 82.430040] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0 [ 82.438199] 9fa0: c000f800 c000f804 60000053 ffffffff 00000000 c0050e70 c0803bc0 c0783bd8 [ 82.446358] 9fc0: ffffffff ffffffff c0783664 00000000 00000000 c07b13e8 00000000 c0803e54 [ 82.454517] 9fe0: c07ca480 c07b13e4 c07ce40c 4000406a 00000000 40008074 00000000 00000000 [ 82.462689] [<c03510d4>] (composite_setup) from [<c0340890>] (s3c_hsotg_complete_setup+0xb4/0x418) [ 82.471626] [<c0340890>] (s3c_hsotg_complete_setup) from [<c0354170>] (usb_gadget_giveback_request+0xc/0x10) [ 82.481429] [<c0354170>] (usb_gadget_giveback_request) from [<c033db4c>] (s3c_hsotg_complete_request+0xcc/0x12c) [ 82.491583] [<c033db4c>] (s3c_hsotg_complete_request) from [<c0341670>] (s3c_hsotg_irq+0x4fc/0x558) [ 82.500614] [<c0341670>] (s3c_hsotg_irq) from [<c005d54c>] (handle_irq_event_percpu+0x50/0x150) [ 82.509291] [<c005d54c>] (handle_irq_event_percpu) from [<c005d688>] (handle_irq_event+0x3c/0x5c) [ 82.518145] [<c005d688>] (handle_irq_event) from [<c006009c>] (handle_fasteoi_irq+0xd4/0x18c) [ 82.526650] [<c006009c>] (handle_fasteoi_irq) from [<c005ce20>] (generic_handle_irq+0x20/0x30) [ 82.535242] [<c005ce20>] (generic_handle_irq) from [<c005cf34>] (__handle_domain_irq+0x6c/0xdc) [ 82.543923] [<c005cf34>] (__handle_domain_irq) from [<c00086b4>] (gic_handle_irq+0x2c/0x6c) [ 82.552256] [<c00086b4>] (gic_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x74) [ 82.559716] Exception stack(0xc07c9f68 to 0xc07c9fb0) [ 82.564753] 9f60: 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c [ 82.572913] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0 [ 82.581069] 9fa0: c000f800 c000f804 60000053 ffffffff [ 82.586113] [<c0011fc0>] (__irq_svc) from [<c000f804>] (arch_cpu_idle+0x30/0x3c) [ 82.593491] [<c000f804>] (arch_cpu_idle) from [<c0050e70>] (cpu_startup_entry+0x128/0x1a4) [ 82.601740] [<c0050e70>] (cpu_startup_entry) from [<c0783bd8>] (start_kernel+0x350/0x3bc) [ 82.609890] Code: 0a000002 e3530005 05975010 15975008 (e5953000) [ 82.615965] ---[ end trace f57d5f599a5f1bfa ]--- Most of kernel code assume that interface array in struct usb_configuration is NULL terminated. When gadget is composed with configfs configuration structure may be reused for different functions set. This bug happens because purge_configs_funcs() sets only next_interface_id to 0. Interface array still contains pointers to already freed interfaces. If in second try we add less interfaces than earlier we may access unallocated memory when trying to get interface descriptors. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Felipe Balbi <balbi@ti.com>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Apr 24, 2024
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Apr 24, 2024
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Apr 24, 2024
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Apr 24, 2024
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Apr 24, 2024
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Apr 24, 2024
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Apr 24, 2024
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Apr 25, 2024
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: NipaLocal <nipa@local>
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Apr 25, 2024
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
Apr 28, 2024
[ Upstream commit b377add ] Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
Apr 29, 2024
[ Upstream commit b377add ] Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
Apr 29, 2024
[ Upstream commit b377add ] Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mj22226
pushed a commit
to mj22226/linux
that referenced
this pull request
Apr 30, 2024
[ Upstream commit b377add ] Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mj22226
pushed a commit
to mj22226/linux
that referenced
this pull request
Apr 30, 2024
[ Upstream commit b377add ] Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
May 1, 2024
[ Upstream commit b377add ] Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
May 2, 2024
[ Upstream commit b377add ] Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
May 2, 2024
[ Upstream commit b377add ] Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
May 2, 2024
[ Upstream commit b377add ] Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
May 2, 2024
[ Upstream commit b377add ] Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1054009064
pushed a commit
to 1054009064/linux
that referenced
this pull request
May 2, 2024
[ Upstream commit b377add ] Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
ptr1337
pushed a commit
to CachyOS/linux
that referenced
this pull request
May 2, 2024
[ Upstream commit b377add ] Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 torvalds#39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/4628e9a22d1d84818e28310abbbc498e7bc31bc9.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
May 3, 2024
Lockdep reports the below circular locking dependency issue. The mmap_lock acquisition while holding pci_bus_sem is due to the use of copy_to_user() from within a pci_walk_bus() callback. Building the devices array directly into the user buffer is only for convenience. Instead we can allocate a local buffer for the array, bounded by the number of devices on the bus/slot, fill the device information into this local buffer, then copy it into the user buffer outside the bus walk callback. ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc5+ torvalds#39 Not tainted ------------------------------------------------------ CPU 0/KVM/4113 is trying to acquire lock: ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] but task is already holding lock: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_lock){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __might_fault+0x5c/0x80 _copy_to_user+0x1e/0x60 vfio_pci_fill_devs+0x9f/0x130 [vfio_pci_core] vfio_pci_walk_wrapper+0x45/0x60 [vfio_pci_core] __pci_walk_bus+0x6b/0xb0 vfio_pci_ioctl_get_pci_hot_reset_info+0x10b/0x1d0 [vfio_pci_core] vfio_pci_core_ioctl+0x1cb/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (pci_bus_sem){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_read+0x3e/0x160 pci_bridge_wait_for_secondary_bus.part.0+0x33/0x2d0 pci_reset_bus+0xdd/0x160 vfio_pci_dev_set_hot_reset+0x256/0x270 [vfio_pci_core] vfio_pci_ioctl_pci_hot_reset_groups+0x1a3/0x280 [vfio_pci_core] vfio_pci_core_ioctl+0x3b5/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&vdev->memory_lock){+.+.}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_write+0x3b/0xc0 vfio_pci_zap_and_down_write_memory_lock+0x1c/0x30 [vfio_pci_core] vfio_basic_config_write+0x281/0x340 [vfio_pci_core] vfio_config_do_rw+0x1fa/0x300 [vfio_pci_core] vfio_pci_config_rw+0x75/0xe50 [vfio_pci_core] vfio_pci_rw+0xea/0x1a0 [vfio_pci_core] vfs_write+0xea/0x520 __x64_sys_pwrite64+0x90/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&vdev->vma_lock){+.+.}-{4:4}: check_prev_add+0xeb/0xcc0 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __mutex_lock+0x97/0xde0 vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &vdev->vma_lock --> pci_bus_sem --> &mm->mmap_lock Possible unsafe locking scenario: block dm-0: the capability attribute has been deprecated. CPU0 CPU1 ---- ---- rlock(&mm->mmap_lock); lock(pci_bus_sem); lock(&mm->mmap_lock); lock(&vdev->vma_lock); *** DEADLOCK *** 2 locks held by CPU 0/KVM/4113: #0: ffff99a25f294888 (&iommu->lock#2){+.+.}-{4:4}, at: vfio_dma_do_map+0x60/0x440 [vfio_iommu_type1] #1: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] stack backtrace: CPU: 1 PID: 4113 Comm: CPU 0/KVM Not tainted 6.9.0-rc5+ torvalds#39 Hardware name: Dell Inc. PowerEdge T640/04WYPY, BIOS 2.15.1 06/16/2022 Call Trace: <TASK> dump_stack_lvl+0x64/0xa0 check_noncircular+0x131/0x150 check_prev_add+0xeb/0xcc0 ? add_chain_cache+0x10a/0x2f0 ? __lock_acquire+0x4e4/0xb90 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_is_held_type+0x9a/0x110 __mutex_lock+0x97/0xde0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? find_held_lock+0x2b/0x80 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 ? rcu_core+0x8d/0x250 ? __lock_release+0x5e/0x160 ? rcu_core+0x8d/0x250 ? lock_release+0x5f/0x120 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xb/0x190 ? irqtime_account_irq+0x40/0xc0 ? __local_bh_enable+0x54/0x60 ? __do_softirq+0x315/0x3ca ? lockdep_hardirqs_on_prepare.part.0+0x97/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f8300d0357b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007f82ef3fb948 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8300d0357b RDX: 00007f82ef3fb990 RSI: 0000000000003b71 RDI: 0000000000000023 RBP: 00007f82ef3fb9c0 R08: 0000000000000000 R09: 0000561b7e0bcac2 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000200000000 R14: 0000381800000000 R15: 0000000000000000 </TASK> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
May 10, 2024
Lockdep reports the below circular locking dependency issue. The mmap_lock acquisition while holding pci_bus_sem is due to the use of copy_to_user() from within a pci_walk_bus() callback. Building the devices array directly into the user buffer is only for convenience. Instead we can allocate a local buffer for the array, bounded by the number of devices on the bus/slot, fill the device information into this local buffer, then copy it into the user buffer outside the bus walk callback. ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc5+ torvalds#39 Not tainted ------------------------------------------------------ CPU 0/KVM/4113 is trying to acquire lock: ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] but task is already holding lock: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_lock){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __might_fault+0x5c/0x80 _copy_to_user+0x1e/0x60 vfio_pci_fill_devs+0x9f/0x130 [vfio_pci_core] vfio_pci_walk_wrapper+0x45/0x60 [vfio_pci_core] __pci_walk_bus+0x6b/0xb0 vfio_pci_ioctl_get_pci_hot_reset_info+0x10b/0x1d0 [vfio_pci_core] vfio_pci_core_ioctl+0x1cb/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (pci_bus_sem){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_read+0x3e/0x160 pci_bridge_wait_for_secondary_bus.part.0+0x33/0x2d0 pci_reset_bus+0xdd/0x160 vfio_pci_dev_set_hot_reset+0x256/0x270 [vfio_pci_core] vfio_pci_ioctl_pci_hot_reset_groups+0x1a3/0x280 [vfio_pci_core] vfio_pci_core_ioctl+0x3b5/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&vdev->memory_lock){+.+.}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_write+0x3b/0xc0 vfio_pci_zap_and_down_write_memory_lock+0x1c/0x30 [vfio_pci_core] vfio_basic_config_write+0x281/0x340 [vfio_pci_core] vfio_config_do_rw+0x1fa/0x300 [vfio_pci_core] vfio_pci_config_rw+0x75/0xe50 [vfio_pci_core] vfio_pci_rw+0xea/0x1a0 [vfio_pci_core] vfs_write+0xea/0x520 __x64_sys_pwrite64+0x90/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&vdev->vma_lock){+.+.}-{4:4}: check_prev_add+0xeb/0xcc0 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __mutex_lock+0x97/0xde0 vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &vdev->vma_lock --> pci_bus_sem --> &mm->mmap_lock Possible unsafe locking scenario: block dm-0: the capability attribute has been deprecated. CPU0 CPU1 ---- ---- rlock(&mm->mmap_lock); lock(pci_bus_sem); lock(&mm->mmap_lock); lock(&vdev->vma_lock); *** DEADLOCK *** 2 locks held by CPU 0/KVM/4113: #0: ffff99a25f294888 (&iommu->lock#2){+.+.}-{4:4}, at: vfio_dma_do_map+0x60/0x440 [vfio_iommu_type1] #1: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] stack backtrace: CPU: 1 PID: 4113 Comm: CPU 0/KVM Not tainted 6.9.0-rc5+ torvalds#39 Hardware name: Dell Inc. PowerEdge T640/04WYPY, BIOS 2.15.1 06/16/2022 Call Trace: <TASK> dump_stack_lvl+0x64/0xa0 check_noncircular+0x131/0x150 check_prev_add+0xeb/0xcc0 ? add_chain_cache+0x10a/0x2f0 ? __lock_acquire+0x4e4/0xb90 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_is_held_type+0x9a/0x110 __mutex_lock+0x97/0xde0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? find_held_lock+0x2b/0x80 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 ? rcu_core+0x8d/0x250 ? __lock_release+0x5e/0x160 ? rcu_core+0x8d/0x250 ? lock_release+0x5f/0x120 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xb/0x190 ? irqtime_account_irq+0x40/0xc0 ? __local_bh_enable+0x54/0x60 ? __do_softirq+0x315/0x3ca ? lockdep_hardirqs_on_prepare.part.0+0x97/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f8300d0357b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007f82ef3fb948 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8300d0357b RDX: 00007f82ef3fb990 RSI: 0000000000003b71 RDI: 0000000000000023 RBP: 00007f82ef3fb9c0 R08: 0000000000000000 R09: 0000561b7e0bcac2 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000200000000 R14: 0000381800000000 R15: 0000000000000000 </TASK> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20240503143138.3562116-1-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
mj22226
pushed a commit
to mj22226/linux
that referenced
this pull request
Jun 25, 2024
[ Upstream commit f6944d4 ] Lockdep reports the below circular locking dependency issue. The mmap_lock acquisition while holding pci_bus_sem is due to the use of copy_to_user() from within a pci_walk_bus() callback. Building the devices array directly into the user buffer is only for convenience. Instead we can allocate a local buffer for the array, bounded by the number of devices on the bus/slot, fill the device information into this local buffer, then copy it into the user buffer outside the bus walk callback. ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc5+ torvalds#39 Not tainted ------------------------------------------------------ CPU 0/KVM/4113 is trying to acquire lock: ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] but task is already holding lock: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_lock){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __might_fault+0x5c/0x80 _copy_to_user+0x1e/0x60 vfio_pci_fill_devs+0x9f/0x130 [vfio_pci_core] vfio_pci_walk_wrapper+0x45/0x60 [vfio_pci_core] __pci_walk_bus+0x6b/0xb0 vfio_pci_ioctl_get_pci_hot_reset_info+0x10b/0x1d0 [vfio_pci_core] vfio_pci_core_ioctl+0x1cb/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (pci_bus_sem){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_read+0x3e/0x160 pci_bridge_wait_for_secondary_bus.part.0+0x33/0x2d0 pci_reset_bus+0xdd/0x160 vfio_pci_dev_set_hot_reset+0x256/0x270 [vfio_pci_core] vfio_pci_ioctl_pci_hot_reset_groups+0x1a3/0x280 [vfio_pci_core] vfio_pci_core_ioctl+0x3b5/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&vdev->memory_lock){+.+.}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_write+0x3b/0xc0 vfio_pci_zap_and_down_write_memory_lock+0x1c/0x30 [vfio_pci_core] vfio_basic_config_write+0x281/0x340 [vfio_pci_core] vfio_config_do_rw+0x1fa/0x300 [vfio_pci_core] vfio_pci_config_rw+0x75/0xe50 [vfio_pci_core] vfio_pci_rw+0xea/0x1a0 [vfio_pci_core] vfs_write+0xea/0x520 __x64_sys_pwrite64+0x90/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&vdev->vma_lock){+.+.}-{4:4}: check_prev_add+0xeb/0xcc0 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __mutex_lock+0x97/0xde0 vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &vdev->vma_lock --> pci_bus_sem --> &mm->mmap_lock Possible unsafe locking scenario: block dm-0: the capability attribute has been deprecated. CPU0 CPU1 ---- ---- rlock(&mm->mmap_lock); lock(pci_bus_sem); lock(&mm->mmap_lock); lock(&vdev->vma_lock); *** DEADLOCK *** 2 locks held by CPU 0/KVM/4113: #0: ffff99a25f294888 (&iommu->lock#2){+.+.}-{4:4}, at: vfio_dma_do_map+0x60/0x440 [vfio_iommu_type1] #1: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] stack backtrace: CPU: 1 PID: 4113 Comm: CPU 0/KVM Not tainted 6.9.0-rc5+ torvalds#39 Hardware name: Dell Inc. PowerEdge T640/04WYPY, BIOS 2.15.1 06/16/2022 Call Trace: <TASK> dump_stack_lvl+0x64/0xa0 check_noncircular+0x131/0x150 check_prev_add+0xeb/0xcc0 ? add_chain_cache+0x10a/0x2f0 ? __lock_acquire+0x4e4/0xb90 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_is_held_type+0x9a/0x110 __mutex_lock+0x97/0xde0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? find_held_lock+0x2b/0x80 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 ? rcu_core+0x8d/0x250 ? __lock_release+0x5e/0x160 ? rcu_core+0x8d/0x250 ? lock_release+0x5f/0x120 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xb/0x190 ? irqtime_account_irq+0x40/0xc0 ? __local_bh_enable+0x54/0x60 ? __do_softirq+0x315/0x3ca ? lockdep_hardirqs_on_prepare.part.0+0x97/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f8300d0357b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007f82ef3fb948 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8300d0357b RDX: 00007f82ef3fb990 RSI: 0000000000003b71 RDI: 0000000000000023 RBP: 00007f82ef3fb9c0 R08: 0000000000000000 R09: 0000561b7e0bcac2 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000200000000 R14: 0000381800000000 R15: 0000000000000000 </TASK> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20240503143138.3562116-1-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Jun 25, 2024
Whenever firmware is crashed in split-phy below WARN_ON() triggered: WARNING: CPU: 3 PID: 82 at net/mac80211/driver-ops.c:41 drv_stop+0xac/0xbc Modules linked in: ath12k qmi_helpers CPU: 3 PID: 82 Comm: kworker/3:2 Tainted: G D W 6.9.0-next-20240520-00113-gd981a3784e15 torvalds#39 Hardware name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9 (DT) Workqueue: events_freezable ieee80211_restart_work pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drv_stop+0xac/0xbc lr : ieee80211_stop_device+0x54/0x64 sp : ffff8000848dbb20 x29: ffff8000848dbb20 x28: 0000000000000790 x27: ffff000014d78900 x26: ffff000014d791f8 x25: ffff000007f0d9b0 x24: 0000000000000018 x23: 0000000000000001 x22: 0000000000000000 x21: ffff000014d78e10 x20: ffff800081dc0000 x19: ffff000014d78900 x18: ffffffffffffffff x17: ffff7fffbca84000 x16: ffff800083fe0000 x15: ffff800081dc0b48 x14: 0000000000000076 x13: 0000000000000076 x12: 0000000000000001 x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff8000848db980 x8 : ffff000000dddfc0 x7 : 0000000000000400 x6 : ffff800083b012d8 x5 : ffff800083b012d8 x4 : 0000000000000000 x3 : ffff000014d78398 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000014d78900 Call trace: drv_stop+0xac/0xbc ieee80211_stop_device+0x54/0x64 ieee80211_do_stop+0x5a0/0x790 ieee80211_stop+0x4c/0x178 __dev_close_many+0xb0/0x150 dev_close_many+0x88/0x130 dev_close.part.171+0x44/0x74 dev_close+0x1c/0x28 cfg80211_shutdown_all_interfaces+0x44/0xfc ieee80211_restart_work+0xfc/0x14c process_scheduled_works+0x18c/0x2dc worker_thread+0x13c/0x314 kthread+0x118/0x124 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- The warning in question is from drv_stop(): if (WARN_ON(!local->started)) return; The sequence of WARN_ON() is: Thread 1: -Firmware crash calls ath12k_core_reset(). -Call ieee80211_restart_hw() inside ath12k_core_post_reconfigure_recovery() which schedules worker for both hardware. -Wait for completion of ab->recovery_start. Thread 2 (worker thread): -One hardware acquires rtnl_lock() inside ieee80211_restart_hw() and calls ath12k_mac_wait_reconfigure() into ath12k_mac_op_start(). -Hardware is waiting for ab->reconfigure_complete but at this time recovery_start_count value is 1 because another worker thread (local->restart_work) is still waiting for rtnl_lock(). recovery_start_count is not equal to number of radios (2 in split-phy). So ab->recovery_start complete does not set due to this, thread 1 is still waiting and not able to perform hif power down up and firmware reload. -Wait timeout happens for ab->reconfigure_complete and comeback to caller (ath12k_mac_op_start()) and sends WMI command to crashed firmware and gets error. -This returns error to drv_start() and local->started is set to false. -Hardware calls cfg80211_shutdown_all_interfaces() after receiving error inside ieee80211_restart_work() and goes to drv_stop(), here we trigger WARN_ON as local->started is false. To fix this issue call ieee80211_restart_hw() after firmware has been reloaded. Now, each hardware can send WMI command to firmware successfully. With this fix we don't need to wait for ab->recovery_start completion so remove ath12k_mac_wait_reconfigure(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 HW2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240529034405.2863150-1-quic_aarasahu@quicinc.com
mj22226
pushed a commit
to mj22226/linux
that referenced
this pull request
Jun 25, 2024
[ Upstream commit f6944d4 ] Lockdep reports the below circular locking dependency issue. The mmap_lock acquisition while holding pci_bus_sem is due to the use of copy_to_user() from within a pci_walk_bus() callback. Building the devices array directly into the user buffer is only for convenience. Instead we can allocate a local buffer for the array, bounded by the number of devices on the bus/slot, fill the device information into this local buffer, then copy it into the user buffer outside the bus walk callback. ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc5+ torvalds#39 Not tainted ------------------------------------------------------ CPU 0/KVM/4113 is trying to acquire lock: ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] but task is already holding lock: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_lock){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __might_fault+0x5c/0x80 _copy_to_user+0x1e/0x60 vfio_pci_fill_devs+0x9f/0x130 [vfio_pci_core] vfio_pci_walk_wrapper+0x45/0x60 [vfio_pci_core] __pci_walk_bus+0x6b/0xb0 vfio_pci_ioctl_get_pci_hot_reset_info+0x10b/0x1d0 [vfio_pci_core] vfio_pci_core_ioctl+0x1cb/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (pci_bus_sem){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_read+0x3e/0x160 pci_bridge_wait_for_secondary_bus.part.0+0x33/0x2d0 pci_reset_bus+0xdd/0x160 vfio_pci_dev_set_hot_reset+0x256/0x270 [vfio_pci_core] vfio_pci_ioctl_pci_hot_reset_groups+0x1a3/0x280 [vfio_pci_core] vfio_pci_core_ioctl+0x3b5/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&vdev->memory_lock){+.+.}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_write+0x3b/0xc0 vfio_pci_zap_and_down_write_memory_lock+0x1c/0x30 [vfio_pci_core] vfio_basic_config_write+0x281/0x340 [vfio_pci_core] vfio_config_do_rw+0x1fa/0x300 [vfio_pci_core] vfio_pci_config_rw+0x75/0xe50 [vfio_pci_core] vfio_pci_rw+0xea/0x1a0 [vfio_pci_core] vfs_write+0xea/0x520 __x64_sys_pwrite64+0x90/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&vdev->vma_lock){+.+.}-{4:4}: check_prev_add+0xeb/0xcc0 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __mutex_lock+0x97/0xde0 vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &vdev->vma_lock --> pci_bus_sem --> &mm->mmap_lock Possible unsafe locking scenario: block dm-0: the capability attribute has been deprecated. CPU0 CPU1 ---- ---- rlock(&mm->mmap_lock); lock(pci_bus_sem); lock(&mm->mmap_lock); lock(&vdev->vma_lock); *** DEADLOCK *** 2 locks held by CPU 0/KVM/4113: #0: ffff99a25f294888 (&iommu->lock#2){+.+.}-{4:4}, at: vfio_dma_do_map+0x60/0x440 [vfio_iommu_type1] #1: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] stack backtrace: CPU: 1 PID: 4113 Comm: CPU 0/KVM Not tainted 6.9.0-rc5+ torvalds#39 Hardware name: Dell Inc. PowerEdge T640/04WYPY, BIOS 2.15.1 06/16/2022 Call Trace: <TASK> dump_stack_lvl+0x64/0xa0 check_noncircular+0x131/0x150 check_prev_add+0xeb/0xcc0 ? add_chain_cache+0x10a/0x2f0 ? __lock_acquire+0x4e4/0xb90 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_is_held_type+0x9a/0x110 __mutex_lock+0x97/0xde0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? find_held_lock+0x2b/0x80 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 ? rcu_core+0x8d/0x250 ? __lock_release+0x5e/0x160 ? rcu_core+0x8d/0x250 ? lock_release+0x5f/0x120 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xb/0x190 ? irqtime_account_irq+0x40/0xc0 ? __local_bh_enable+0x54/0x60 ? __do_softirq+0x315/0x3ca ? lockdep_hardirqs_on_prepare.part.0+0x97/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f8300d0357b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007f82ef3fb948 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8300d0357b RDX: 00007f82ef3fb990 RSI: 0000000000003b71 RDI: 0000000000000023 RBP: 00007f82ef3fb9c0 R08: 0000000000000000 R09: 0000561b7e0bcac2 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000200000000 R14: 0000381800000000 R15: 0000000000000000 </TASK> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20240503143138.3562116-1-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
intersectRaven
pushed a commit
to intersectRaven/linux
that referenced
this pull request
Jun 27, 2024
[ Upstream commit f6944d4 ] Lockdep reports the below circular locking dependency issue. The mmap_lock acquisition while holding pci_bus_sem is due to the use of copy_to_user() from within a pci_walk_bus() callback. Building the devices array directly into the user buffer is only for convenience. Instead we can allocate a local buffer for the array, bounded by the number of devices on the bus/slot, fill the device information into this local buffer, then copy it into the user buffer outside the bus walk callback. ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc5+ torvalds#39 Not tainted ------------------------------------------------------ CPU 0/KVM/4113 is trying to acquire lock: ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] but task is already holding lock: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_lock){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __might_fault+0x5c/0x80 _copy_to_user+0x1e/0x60 vfio_pci_fill_devs+0x9f/0x130 [vfio_pci_core] vfio_pci_walk_wrapper+0x45/0x60 [vfio_pci_core] __pci_walk_bus+0x6b/0xb0 vfio_pci_ioctl_get_pci_hot_reset_info+0x10b/0x1d0 [vfio_pci_core] vfio_pci_core_ioctl+0x1cb/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (pci_bus_sem){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_read+0x3e/0x160 pci_bridge_wait_for_secondary_bus.part.0+0x33/0x2d0 pci_reset_bus+0xdd/0x160 vfio_pci_dev_set_hot_reset+0x256/0x270 [vfio_pci_core] vfio_pci_ioctl_pci_hot_reset_groups+0x1a3/0x280 [vfio_pci_core] vfio_pci_core_ioctl+0x3b5/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&vdev->memory_lock){+.+.}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_write+0x3b/0xc0 vfio_pci_zap_and_down_write_memory_lock+0x1c/0x30 [vfio_pci_core] vfio_basic_config_write+0x281/0x340 [vfio_pci_core] vfio_config_do_rw+0x1fa/0x300 [vfio_pci_core] vfio_pci_config_rw+0x75/0xe50 [vfio_pci_core] vfio_pci_rw+0xea/0x1a0 [vfio_pci_core] vfs_write+0xea/0x520 __x64_sys_pwrite64+0x90/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&vdev->vma_lock){+.+.}-{4:4}: check_prev_add+0xeb/0xcc0 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __mutex_lock+0x97/0xde0 vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &vdev->vma_lock --> pci_bus_sem --> &mm->mmap_lock Possible unsafe locking scenario: block dm-0: the capability attribute has been deprecated. CPU0 CPU1 ---- ---- rlock(&mm->mmap_lock); lock(pci_bus_sem); lock(&mm->mmap_lock); lock(&vdev->vma_lock); *** DEADLOCK *** 2 locks held by CPU 0/KVM/4113: #0: ffff99a25f294888 (&iommu->lock#2){+.+.}-{4:4}, at: vfio_dma_do_map+0x60/0x440 [vfio_iommu_type1] #1: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] stack backtrace: CPU: 1 PID: 4113 Comm: CPU 0/KVM Not tainted 6.9.0-rc5+ torvalds#39 Hardware name: Dell Inc. PowerEdge T640/04WYPY, BIOS 2.15.1 06/16/2022 Call Trace: <TASK> dump_stack_lvl+0x64/0xa0 check_noncircular+0x131/0x150 check_prev_add+0xeb/0xcc0 ? add_chain_cache+0x10a/0x2f0 ? __lock_acquire+0x4e4/0xb90 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_is_held_type+0x9a/0x110 __mutex_lock+0x97/0xde0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? find_held_lock+0x2b/0x80 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 ? rcu_core+0x8d/0x250 ? __lock_release+0x5e/0x160 ? rcu_core+0x8d/0x250 ? lock_release+0x5f/0x120 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xb/0x190 ? irqtime_account_irq+0x40/0xc0 ? __local_bh_enable+0x54/0x60 ? __do_softirq+0x315/0x3ca ? lockdep_hardirqs_on_prepare.part.0+0x97/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f8300d0357b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007f82ef3fb948 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8300d0357b RDX: 00007f82ef3fb990 RSI: 0000000000003b71 RDI: 0000000000000023 RBP: 00007f82ef3fb9c0 R08: 0000000000000000 R09: 0000561b7e0bcac2 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000200000000 R14: 0000381800000000 R15: 0000000000000000 </TASK> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20240503143138.3562116-1-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
staging-kernelci-org
pushed a commit
to kernelci/linux
that referenced
this pull request
Jun 27, 2024
[ Upstream commit f6944d4 ] Lockdep reports the below circular locking dependency issue. The mmap_lock acquisition while holding pci_bus_sem is due to the use of copy_to_user() from within a pci_walk_bus() callback. Building the devices array directly into the user buffer is only for convenience. Instead we can allocate a local buffer for the array, bounded by the number of devices on the bus/slot, fill the device information into this local buffer, then copy it into the user buffer outside the bus walk callback. ====================================================== WARNING: possible circular locking dependency detected 6.9.0-rc5+ torvalds#39 Not tainted ------------------------------------------------------ CPU 0/KVM/4113 is trying to acquire lock: ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] but task is already holding lock: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&mm->mmap_lock){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __might_fault+0x5c/0x80 _copy_to_user+0x1e/0x60 vfio_pci_fill_devs+0x9f/0x130 [vfio_pci_core] vfio_pci_walk_wrapper+0x45/0x60 [vfio_pci_core] __pci_walk_bus+0x6b/0xb0 vfio_pci_ioctl_get_pci_hot_reset_info+0x10b/0x1d0 [vfio_pci_core] vfio_pci_core_ioctl+0x1cb/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (pci_bus_sem){++++}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_read+0x3e/0x160 pci_bridge_wait_for_secondary_bus.part.0+0x33/0x2d0 pci_reset_bus+0xdd/0x160 vfio_pci_dev_set_hot_reset+0x256/0x270 [vfio_pci_core] vfio_pci_ioctl_pci_hot_reset_groups+0x1a3/0x280 [vfio_pci_core] vfio_pci_core_ioctl+0x3b5/0x400 [vfio_pci_core] vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&vdev->memory_lock){+.+.}-{4:4}: __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 down_write+0x3b/0xc0 vfio_pci_zap_and_down_write_memory_lock+0x1c/0x30 [vfio_pci_core] vfio_basic_config_write+0x281/0x340 [vfio_pci_core] vfio_config_do_rw+0x1fa/0x300 [vfio_pci_core] vfio_pci_config_rw+0x75/0xe50 [vfio_pci_core] vfio_pci_rw+0xea/0x1a0 [vfio_pci_core] vfs_write+0xea/0x520 __x64_sys_pwrite64+0x90/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&vdev->vma_lock){+.+.}-{4:4}: check_prev_add+0xeb/0xcc0 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 __mutex_lock+0x97/0xde0 vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &vdev->vma_lock --> pci_bus_sem --> &mm->mmap_lock Possible unsafe locking scenario: block dm-0: the capability attribute has been deprecated. CPU0 CPU1 ---- ---- rlock(&mm->mmap_lock); lock(pci_bus_sem); lock(&mm->mmap_lock); lock(&vdev->vma_lock); *** DEADLOCK *** 2 locks held by CPU 0/KVM/4113: #0: ffff99a25f294888 (&iommu->lock#2){+.+.}-{4:4}, at: vfio_dma_do_map+0x60/0x440 [vfio_iommu_type1] #1: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1] stack backtrace: CPU: 1 PID: 4113 Comm: CPU 0/KVM Not tainted 6.9.0-rc5+ torvalds#39 Hardware name: Dell Inc. PowerEdge T640/04WYPY, BIOS 2.15.1 06/16/2022 Call Trace: <TASK> dump_stack_lvl+0x64/0xa0 check_noncircular+0x131/0x150 check_prev_add+0xeb/0xcc0 ? add_chain_cache+0x10a/0x2f0 ? __lock_acquire+0x4e4/0xb90 validate_chain+0x465/0x530 __lock_acquire+0x4e4/0xb90 lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_is_held_type+0x9a/0x110 __mutex_lock+0x97/0xde0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? lock_acquire+0xbc/0x2d0 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] ? find_held_lock+0x2b/0x80 ? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core] __do_fault+0x31/0x160 do_pte_missing+0x65/0x3b0 __handle_mm_fault+0x303/0x720 handle_mm_fault+0x10f/0x460 fixup_user_fault+0x7f/0x1f0 follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1] vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1] vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1] vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1] vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1] vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1] __x64_sys_ioctl+0x8a/0xc0 do_syscall_64+0x8d/0x170 ? rcu_core+0x8d/0x250 ? __lock_release+0x5e/0x160 ? rcu_core+0x8d/0x250 ? lock_release+0x5f/0x120 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xb/0x190 ? irqtime_account_irq+0x40/0xc0 ? __local_bh_enable+0x54/0x60 ? __do_softirq+0x315/0x3ca ? lockdep_hardirqs_on_prepare.part.0+0x97/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f8300d0357b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007f82ef3fb948 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8300d0357b RDX: 00007f82ef3fb990 RSI: 0000000000003b71 RDI: 0000000000000023 RBP: 00007f82ef3fb9c0 R08: 0000000000000000 R09: 0000561b7e0bcac2 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000200000000 R14: 0000381800000000 R15: 0000000000000000 </TASK> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20240503143138.3562116-1-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
minimaxwell
pushed a commit
to minimaxwell/linux
that referenced
this pull request
Sep 7, 2024
In case of TX timeout, fs_timeout() calls phy_stop(), which triggers the following BUG_ON() as we are in interrupt. [92708.199889] kernel BUG at drivers/net/phy/mdio_bus.c:482! [92708.204985] Oops: Exception in kernel mode, sig: 5 [~1] [92708.210119] PREEMPT [92708.212107] CMPC885 [92708.214216] CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G W 4.9.61 torvalds#39 [92708.223227] task: c60f0a40 task.stack: c6104000 [92708.227697] NIP: c02a84bc LR: c02a947c CTR: c02a93d8 [92708.232614] REGS: c6105c70 TRAP: 0700 Tainted: G W (4.9.61) [92708.241193] MSR: 00021032 <ME,IR,DR,RI>[92708.244818] CR: 24000822 XER: 20000000 [92708.248767] GPR00: c02a947c c6105d20 c60f0a40 c62b4c00 00000005 0000001f c069aad8 0001a688 GPR08: 00000007 00000100 c02a93d8 00000000 000005fc 00000000 c6213240 c06338e4 GPR16: 00000001 c06330d4 c0633094 00000000 c0680000 c6104000 c6104000 00000000 GPR24: 00000200 00000000 ffffffff 00000004 00000078 00009032 00000000 c62b4c00 NIP [c02a84bc] mdiobus_read+0x20/0x74 [92708.281517] LR [c02a947c] kszphy_config_intr+0xa4/0xc4 [92708.286547] Call Trace: [92708.288980] [c6105d20] [c6104000] 0xc6104000 (unreliable) [92708.294339] [c6105d40] [c02a947c] kszphy_config_intr+0xa4/0xc4 [92708.300098] [c6105d50] [c02a5330] phy_stop+0x60/0x9c [92708.305007] [c6105d60] [c02c84d0] fs_timeout+0xdc/0x110 [92708.310197] [c6105d80] [c035cd48] dev_watchdog+0x268/0x2a0 [92708.315593] [c6105db0] [c0060288] call_timer_fn+0x34/0x17c [92708.321014] [c6105dd0] [c00605f0] run_timer_softirq+0x21c/0x2e4 [92708.326887] [c6105e50] [c001e19c] __do_softirq+0xf4/0x2f4 [92708.332207] [c6105eb0] [c001e3c8] run_ksoftirqd+0x2c/0x40 [92708.337560] [c6105ec0] [c003b420] smpboot_thread_fn+0x1f0/0x258 [92708.343405] [c6105ef0] [c003745c] kthread+0xbc/0xd0 [92708.348217] [c6105f40] [c000c400] ret_from_kernel_thread+0x5c/0x64 [92708.354275] Instruction dump: [92708.357207] 7c0803a6 bbc10018 38210020 4e800020 7c0802a6 9421ffe0 54290024 bfc10018 [92708.364865] 90010024 7c7f1b78 81290008 552902ee <0f090000> 3bc3002c 7fc3f378 90810008 [92708.372711] ---[ end trace 42b05441616fafd7 ]--- This patch moves fs_timeout() actions into an async worker. Fixes: commit 48257c4 ("Add fs_enet ethernet network driver, for several embedded platforms") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [#130921]
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
Dec 3, 2024
Compatibility with Linux 6.8 Closes torvalds#39 See merge request ddcci-driver-linux/ddcci-driver-linux!15
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Just spotted it from a Google search, thought I'd fix it. One-liner PR.