March 2021 Bump #27
Merged
March 2021 Bump #27
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
We add newly defined hypervisor CSRs and allow M/HS-mode to access these CSRs. The MRET, SRET, ECALL and WFI instructions have also been updated so that virt-to-novirt switch and exception cause is based on HART virtualization state. Subsequent patches will implement two-stage page tables, HFENCE instructions and HSV/HLV instructions. Signed-off-by: Anup Patel <anup.patel@wdc.com>
We extend our existing MMU implementation to support two-stage translation when running VS-mode for RISC-V hypervisor extension. Signed-off-by: Anup Patel <anup.patel@wdc.com>
We add new HFENCE, HLV, and HSV instructions for HS-mode which are defined as part of the RISC-V hypervisor extension. Signed-off-by: Anup Patel <anup.patel@wdc.com>
We add bootargs command-line option to Spike which allows us to provide custom kernel parameters to Linux and Xvisor. Signed-off-by: Anup Patel <anup.patel@wdc.com>
It is very inconvenient to always embed kernel flat image into OpenSBI for booting Linux/Xvisor on Spike. We add optional "--kernel" command line option for spike. Using this new option, users can specify kernel flat image separately and OpenSBI ELF separately. Signed-off-by: Anup Patel <anup.patel@wdc.com>
RISC-V H-Extension v0.6.1 Support
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Some UCB implementations once used this to represent a pipeline bubble. But this encoding is reserved for future standard HINT use. Resolves #503
Incorporate RVV 1.0 vtype layout change
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
some dump and comparison tool may depennd the initial state of vector register. Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
The command parser still can accept SLEN but the value is not stored in implementation Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
The original name misses the 'i' in instruction mae vamoswape8 -> vamoswapei8 Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
They aren't arch state Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
except for load/store instructions
0 : all instruction can't have non-zero vstart
not 0 : all instruction can have non-zero vstart if it is not required
vstart must be zero in spec
the default value is 1
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
The change comes from the generation order in riscv-opcodes. The original definition is placed in opcode-system but the new one is placed in separated opcode-rv64h and opcode-rv32h. Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Rvv enhance vstart
Op hypvervisor
* make value display depend on max_xlen * try to make spike look for correct pk * PRIx64 instead of PRIx32, TARGET_ARCH back to 64 * 32 bit memory data, exception epc and tval
* Implement JTAG BYPASS register. This allows spike to put into a virtual scan chain with other remote_bitbang JTAG devices. * Initialize bypass to 0. Also change what we do on what edge. In theory that's more correct but in practice it doesn't make a difference.
At compile time, gcc complains with:
../riscv/processor.cc:787:94: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘uint64_t {aka long unsigned int}’ [-Wformat=]
The variable 'bits' is an uint64_t, so that PRIx64 should be used to print it out.
* rvp: add 8/16 bits add/sub simd instructions * rvp: add 8/16 bits shift simd instructions * rvp: add 8/16 bits compare simd instructions * rvp: add 8/16 bits multiply simd instructions * rvp: add 8/16 bits misc simd instructions * rvp: add 8 bits unpacking simd instructions * rvp: update suppported extention and add restriction * rvp: update encoding.h and riscv.mk.in * rvp: disasm: add simd instruction support * rvp: update readme for p-ext simd instructions * rvp: fix rvp support version * rvp: update encoding.h generated from riscv-opcode p-ext branch * rvp: rename some macro argument * rvp: add pk[bb,bt,tt,tb][16,32] instructions * rvp: add kadd32, [su]maqa[_su] instructions * rvp: fix missing initial value of pd * rvp: add msw 32x32 multiply & add instructions * rvp: change to use extract64 * rvp: add msw 32x16 multiply & add instructions * rvp: fix some style * rvp: change reduction marcro definition * rvp: add signed 16x32 add/subtract instructions * rvp: use stdint to replace hardcode max/minimum * rvp: refactor some p-ext macro code * rvp: add partial simd miscellaneous instructions * rvp: add signed 16 x 64 add/subtract Instructions * rvp: add 64-bit add & sub instructions * rvp: add 32-bit mul with 64-bit add/sub instructions * rvp: add 16-bit mul with 64-bit add/sub instructions * rvp: disasm: add 64 bit profile instruction support * rvp: add Q15 saturation instructions * rvp: fix kmar64/kmsr64 saturation behavior * rvp: add 32-bit computation instructions * rvp: add rdov/clrov and fix khm16 behavior of setting OV flag * rvp: add non simd miscellaneous instructions * rvp: add Q31 saturation instructions * rvp: disasm: add non-simd instruction support * rvp: add 32 bits add/sub simd instructions * rvp: fix left shift saturation bug * rvp: add 32 bits shift simd instructions * rvp: add rv64 only Q15 simd instructions * rvp: add rv64 only 32-bit multiply instructions * rvp: add rv64 only 32-bit miscellaneous instructions * rvp: add rv64 only 32-bit mul & add instructions * rvp: add rv64 only 32-bit parallel mul & add instructions * rvp: add rv64 only non-simd 32-bit shift instructions * rvp: disasm: remove redundant tab * rvp: disasm: add rv64 only instructions support * rvp: change ov csr to ucode to match v0.5.2 spec * rvp: update readme for p-ext 0.5.2 * rvp: update to p-ext v0.9.1 * rvp: update to p-ext v0.9.2 * rvp: update readme for p-ext 0.9.2 * rvp: fix macro for PKxx16 & PKxx32 commands. * rvp: fix missing for in PKxxdd macro * Sign-extension for p-ext insns * * Fixed uclipNN insns while sh >> 64 is an UB. * Added missing OV * Added missing sext_xlen * Remove unused macroses * Sign extension for RD_PAIR macro * rvp: remove lost tab Co-authored-by: Mark Fedorov <mark.fedorov@cloudbear.ru>
hgatp.PPN should be writable even if the new MODE is invalid. Additionally, mask off the two LSBs, as the spec allows.
For V=0 or V=1 writes to satp, the entire write is suppressed if the MODE is not supported. For V=0 writes to vsatp, only normal WARLness applies.
This is a bug in the spec that will be changed in the next few days.
Co-authored-by: zhongcy <zhongcy93@gmail.com>
The B extension still implies the presence of Zba/Zbb/Zbc/Zbs.
With recent compilers on recent computers, the much simpler version of the code is actually slightly faster. I suspect, but haven't proven, that more accurate indirect jump prediction is the main explanation. Reduced I$ pressure might be a secondary factor.
After the privilege draft-20191120-569d071, the section 3.1.6.3 says "An MRET or SRET instruction that changes the privilege mode to a mode less privileged than M also sets MPRV=0. Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
problem:
when the following memory region is specified
-m0x00410000:0x1000,
0x00410200:0x1000,
0x00410400:0x1000,
0x00410600:0x1000,
0x00410800:0x1000,
0x00411000:0x1000,
0x00412000:0x1000,
0x00413000:0x1000,
0x00414000:0x1000
The error is
ERROR (duplicate_node_names): Duplicate node name /memory@410
ERROR (duplicate_node_names): Duplicate node name /memory@410
ERROR (duplicate_node_names): Duplicate node name /memory@410
ERROR (duplicate_node_names): Duplicate node name /memory@410
ERROR (duplicate_node_names): Duplicate node name /memory@410
ERROR (duplicate_node_names): Duplicate node name /memory@410
ERROR: Input tree has errors, aborting (use -f to force output)
cause:
the merge_overlapping_memory_regions works not well in partial overlap case
change:
1. use forward way to avoid weird reverse iterator behavior in C++
2. use address but not page number since the base addresses are
all aligned in make_mems
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
allow --isa=rv32gc_xdummy_xabcd_xdef Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
They have been remove in 0.10 spec Signed-off-by: Chih-Min Chao <chihmin.chao@sifive.com>
Misc fix 2021 04 21
- Reverts the AES32 and SM4 instruction encodings back to a normal R-type encoding, per the advice of the architecture reviewers. On branch scalar-crypto-v0.9.2 Changes to be committed: modified: riscv/encoding.h modified: riscv/insns/aes32dsi.h modified: riscv/insns/aes32dsmi.h modified: riscv/insns/aes32esi.h modified: riscv/insns/aes32esmi.h modified: riscv/insns/sm4ed.h modified: riscv/insns/sm4ks.h
scalar-crypto: Encoding fixes for v0.9.2
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Reopening #24 for a branch in this repo. Part of ucb-bar/chipyard#837.