Remove binlog-server point in time recoveries code & tests

go/flags/endtoend/vtcombo.txt

@@ -22,15 +22,7 @@ Flags:
       --backup_storage_number_blocks int                                 if backup_storage_compress is true, backup_storage_number_blocks sets the number of blocks that can be processed, in parallel, before the writer blocks, during compression (default is 2). It should be equal to the number of CPUs available for compression. (default 2)
       --bind-address string                                              Bind address for the server. If empty, the server will listen on all available unicast and anycast IP addresses of the local system.
       --binlog-in-memory-decompressor-max-size uint                      This value sets the uncompressed transaction payload size at which we switch from in-memory buffer based decompression to the slower streaming mode. (default 134217728)
-      --binlog_host string                                               PITR restore parameter: hostname/IP of binlog server.
-      --binlog_password string                                           PITR restore parameter: password of binlog server.
       --binlog_player_protocol string                                    the protocol to download binlogs from a vttablet (default "grpc")
-      --binlog_port int                                                  PITR restore parameter: port of binlog server.
-      --binlog_ssl_ca string                                             PITR restore parameter: Filename containing TLS CA certificate to verify binlog server TLS certificate against.
-      --binlog_ssl_cert string                                           PITR restore parameter: Filename containing mTLS client certificate to present to binlog server as authentication.
-      --binlog_ssl_key string                                            PITR restore parameter: Filename containing mTLS client private key for use in binlog server authentication.
-      --binlog_ssl_server_name string                                    PITR restore parameter: TLS server name (common name) to verify against for the binlog server we are connecting to (If not set: use the hostname or IP supplied in --binlog_host).
-      --binlog_user string                                               PITR restore parameter: username of binlog server.
       --buffer_drain_concurrency int                                     Maximum number of requests retried simultaneously. More concurrency will increase the load on the PRIMARY vttablet when draining the buffer. (default 1)
       --buffer_keyspace_shards string                                    If not empty, limit buffering to these entries (comma separated). Entry format: keyspace or keyspace/shard. Requires --enable_buffer=true.
       --buffer_max_failover_duration duration                            Stop buffering completely if a failover takes longer than this duration. (default 20s)
@@ -261,7 +253,6 @@ Flags:
       --onclose_timeout duration                                         wait no more than this for OnClose handlers before stopping (default 10s)
       --onterm_timeout duration                                          wait no more than this for OnTermSync handlers before stopping (default 10s)
       --pid_file string                                                  If set, the process will write its pid to the named file, and delete it on graceful shutdown.
-      --pitr_gtid_lookup_timeout duration                                PITR restore parameter: timeout for fetching gtid from timestamp. (default 1m0s)
       --planner-version string                                           Sets the default planner to use when the session has not changed it. Valid values are: Gen4, Gen4Greedy, Gen4Left2Right
       --pool_hostname_resolve_interval duration                          if set force an update to all hostnames and reconnect if changed, defaults to 0 (disabled)
       --port int                                                         port for the server

go/flags/endtoend/vttablet.txt

@@ -57,20 +57,12 @@ Flags:
       --backup_storage_number_blocks int                                 if backup_storage_compress is true, backup_storage_number_blocks sets the number of blocks that can be processed, in parallel, before the writer blocks, during compression (default is 2). It should be equal to the number of CPUs available for compression. (default 2)
       --bind-address string                                              Bind address for the server. If empty, the server will listen on all available unicast and anycast IP addresses of the local system.
       --binlog-in-memory-decompressor-max-size uint                      This value sets the uncompressed transaction payload size at which we switch from in-memory buffer based decompression to the slower streaming mode. (default 134217728)
-      --binlog_host string                                               PITR restore parameter: hostname/IP of binlog server.
-      --binlog_password string                                           PITR restore parameter: password of binlog server.
       --binlog_player_grpc_ca string                                     the server ca to use to validate servers when connecting
       --binlog_player_grpc_cert string                                   the cert to use to connect
       --binlog_player_grpc_crl string                                    the server crl to use to validate server certificates when connecting
       --binlog_player_grpc_key string                                    the key to use to connect
       --binlog_player_grpc_server_name string                            the server name to use to validate server certificate
       --binlog_player_protocol string                                    the protocol to download binlogs from a vttablet (default "grpc")
-      --binlog_port int                                                  PITR restore parameter: port of binlog server.
-      --binlog_ssl_ca string                                             PITR restore parameter: Filename containing TLS CA certificate to verify binlog server TLS certificate against.
-      --binlog_ssl_cert string                                           PITR restore parameter: Filename containing mTLS client certificate to present to binlog server as authentication.
-      --binlog_ssl_key string                                            PITR restore parameter: Filename containing mTLS client private key for use in binlog server authentication.
-      --binlog_ssl_server_name string                                    PITR restore parameter: TLS server name (common name) to verify against for the binlog server we are connecting to (If not set: use the hostname or IP supplied in --binlog_host).
-      --binlog_user string                                               PITR restore parameter: username of binlog server.
       --builtinbackup-file-read-buffer-size uint                         read files using an IO buffer of this many bytes. Golang defaults are used when set to 0.
       --builtinbackup-file-write-buffer-size uint                        write files using an IO buffer of this many bytes. Golang defaults are used when set to 0. (default 2097152)
       --builtinbackup-incremental-restore-path string                    the directory where incremental restore files, namely binlog files, are extracted to. In k8s environments, this should be set to a directory that is shared between the vttablet and mysqld pods. The path should exist. When empty, the default OS temp dir is assumed.
@@ -259,7 +251,6 @@ Flags:
       --onterm_timeout duration                                          wait no more than this for OnTermSync handlers before stopping (default 10s)
       --opentsdb_uri string                                              URI of opentsdb /api/put method
       --pid_file string                                                  If set, the process will write its pid to the named file, and delete it on graceful shutdown.
-      --pitr_gtid_lookup_timeout duration                                PITR restore parameter: timeout for fetching gtid from timestamp. (default 1m0s)
       --pool_hostname_resolve_interval duration                          if set force an update to all hostnames and reconnect if changed, defaults to 0 (disabled)
       --port int                                                         port for the server
       --pprof strings                                                    enable profiling

go/mysql/flavor_filepos.go

@@ -84,7 +84,7 @@ func (flv *filePosFlavor) gtidMode(c *Conn) (string, error) {
 
 // serverUUID is part of the Flavor interface.
 func (flv *filePosFlavor) serverUUID(c *Conn) (string, error) {
-	// keep @@global as lowercase, as some servers like the Ripple binlog server only honors a lowercase `global` value
+	// keep @@global as lowercase, as some servers like a binlog server only honors a lowercase `global` value
 	qr, err := c.ExecuteFetch("SELECT @@global.server_uuid", 1, false)
 	if err != nil {
 		return "", err

go/mysql/flavor_mysql.go

@@ -60,7 +60,7 @@ var _ flavor = (*mysqlFlavor82)(nil)
 
 // primaryGTIDSet is part of the Flavor interface.
 func (mysqlFlavor) primaryGTIDSet(c *Conn) (replication.GTIDSet, error) {
-	// keep @@global as lowercase, as some servers like the Ripple binlog server only honors a lowercase `global` value
+	// keep @@global as lowercase, as some servers like a binlog server only honors a lowercase `global` value
 	qr, err := c.ExecuteFetch("SELECT @@global.gtid_executed", 1, false)
 	if err != nil {
 		return nil, err
@@ -73,7 +73,7 @@ func (mysqlFlavor) primaryGTIDSet(c *Conn) (replication.GTIDSet, error) {
 
 // purgedGTIDSet is part of the Flavor interface.
 func (mysqlFlavor) purgedGTIDSet(c *Conn) (replication.GTIDSet, error) {
-	// keep @@global as lowercase, as some servers like the Ripple binlog server only honors a lowercase `global` value
+	// keep @@global as lowercase, as some servers like a binlog server only honors a lowercase `global` value
 	qr, err := c.ExecuteFetch("SELECT @@global.gtid_purged", 1, false)
 	if err != nil {
 		return nil, err
@@ -86,7 +86,7 @@ func (mysqlFlavor) purgedGTIDSet(c *Conn) (replication.GTIDSet, error) {
 
 // serverUUID is part of the Flavor interface.
 func (mysqlFlavor) serverUUID(c *Conn) (string, error) {
-	// keep @@global as lowercase, as some servers like the Ripple binlog server only honors a lowercase `global` value
+	// keep @@global as lowercase, as some servers like a binlog server only honors a lowercase `global` value
 	qr, err := c.ExecuteFetch("SELECT @@global.server_uuid", 1, false)
 	if err != nil {
 		return "", err