Firmware Pycom FIPY

Included features

File systems	RAMFS, SPIFFS.
Lua modules	adc, bt, can, cjson, cpu, encoder, event, fs, gdisplay, i2c, lora, mqtt, neopixel, net, nvs, pack, pio, pwm, sdisplay, sensor, servo, socket, spi, stepper, thread, tmr, uart, ulp.
Networking	WiFi.
Network services	CAN gateway, Captive DNS, Dropbear SSH server, HTTP server, SNTP.
Sensors	10K Thermistor, 2P toggle switch, 2Y0A21, 3P toggle switch, 4x4 key matrix, A49E, Analog joystick, BDE0600G, BH1620FVC, BH1721FVC, BME280, DHT11, DHT22, DHT23, DS1820, GPS, GUVA S12SD, Hall flow sensor, Hall internal, Hall switch, LDR, LM35, Linear potentiometer, ML8511, PING28015, PIR AM412, Push switch, Relative rotary encoder, SDS011, TMP36, Tilt switch, US015.

Hardware mapping

CAN	Signal	GPIO
0	RX TX	GPIO35 GPIO25

I2C	Signal	GPIO
0	SCL SDA	GPIO25 GPIO26
1	SCL SDA	GPIO2 GPIO15

SPI	Signal	GPIO
2	MISO MOSI CLK	GPIO12 GPIO13 GPIO14
3	MISO MOSI CLK	GPIO19 GPIO27 GPIO5

UART	Signal	GPIO
0	RX TX	GPIO3 GPIO1
1	RX TX	GPIO26 GPIO25
2	RX TX	GPIO2 GPIO15

SD/MMC	Signal	GPIO
0	CMD CLK DAT0 CD WP	GPIO15 GPIO14 GPIO2 Not used Not used

SPI displays on SPI3, touch panel on SPI3

Display signal	GPIO
MISO MOSI CLK CS RST CMD BCKL*	GPIO19 GPIO27 GPIO5 GPIO13 GPIO14 GPIO12 Not used

* back light

Touch panel signal	GPIO
MISO MOSI CLK CS	GPIO19 GPIO27 GPIO5 GPIO16

I2C displays on I2C0

Signal	GPIO
SCL SDA	GPIO25 GPIO26