Skip to content

Roger-random/SGVHAK_Rover

Repository files navigation

SGVHAK Rover

This software is the brain of SGVHAK Rover, a six-wheeled rover project inspired by the Mars rovers NASA JPL sent to the red planet. It presents an HTML user interface over HTTP that can be used by any device with a web browser. It communicates with underlying motor controllers via I2C and Serial. This software is designed to run on a Raspberry Pi 3 mounted on the rover, but can be adapted to other hardware as long as it can be a wireless access point and communicate with serial and I2C peripherals.

The source code is intended to be easy for others to understand and tinker with. So it is kept as simple as possible with the following intentional tradeoffs:

  • Functionality is limited to driving the rover as a big remote control car. No autonomous functionality.
  • Not robust against unreliability network. (Noisy WiFi environments.)
  • Not secured against hostile network attackers.

And most of all: no multithreading. Threading is very easy to get wrong, causing problems that are difficult to debug. Since this project is intended to be easy for aspiring robot programmers to pick up and play with, using multiple threads would raise the barrier to entry significantly. Admittedly, avoiding multithreading does limit the features we can implement with this software. But anyone who outgrows the capabilities of this software package hopefully will also be ready to move on to a different robot software platform. (Related note: Though the underlying Flask web platform is capable of multi-thread and multi-process, it will only run as a single thread in a single process when running in development server mode as per instructions below.)

Setup for development & testing

Written under python 2.7.14 with associated pip 9.0.1

virtualenv recommended to help keep Python libraries separate.

  • Install virtualenv pip install virtualenv
  • Switch to SGVHAK_Rover directory
  • Create new virtual environment python -m virtualenv venv
  • Activate virtual environment . venv/bin/activate. Prompt should now be prepended with (venv)

Install dependencies

  • All Python dependencies are described in setup.py and can be installed with pip install -e . (Don't forget the period at the end of the command.)
  • All HTML related dependencies are copied in the /static/ subdirectory and no installation is necessary. Because the HTML UI is served up from the Raspberry Pi 3 acting as an access point without actual internet connectivity, we could not ask the user's web browser to download jQuery and Materialize. Instead, we have a local copy to serve up for use.

Start Flask

  • export FLASK_APP=SGVHAK_Rover
  • To enable debugging (warning: development only) export FLASK_DEBUG=1
  • flask run
  • Open UI by pointing web browser to http://localhost:5000

Setup for Rover Raspberry Pi

  • Clone this repository and set up python, pip, and virtualenv as described above. Manually launch Flask and a web browser to verify the web app launched successfully.
  • Configure flask for launch on startup by editing /etc/rc.local and add the following just above exit 0 at the end of that file.
cd /home/pi/SGVHAK_Rover
export FLASK_APP=SGVHAK_Rover
. venv/bin/activate
flask run --host=0.0.0.0 &

Implementation

In order to drive a six-wheel rover, we need to control the relative velocities of its six driven wheels and the steering angles for each of the four corner steerable wheels. This calculation is the core of the project, and can be found in roverchassis.py.

After the calculations have been made, their results can be sent to one of several motor control control module that will drive the actual mechanical parts. This implementation has the following motor control module implementations to match hardware installed on the rover:

  1. A low-cost low-end servo motor solution controlled with the Adafruit PWM HAT. Adafruit provides a Python library which is wrapped via adafruit_servo_wrapper.py.
  2. A midrange solution with brushed DC motor matched with a quadrature encoder for closed-loop feedback. Controlled via Ion Motion Control's RoboClaw modules. Ion Motion Control likewise provides a Python library, which is wrapped via roboclaw_wrapper.py.
  3. For testing purposes, a nonoperative solution that serves as placeholder when running on a system that has none of the above controllers installed. All operations return success code with no actual effect. This is implemented by roboclaw_wrapper.py calling into roboclaw_stub.py instead of the actual RoboClaw Python API.

The HTML/CSS/JavaScript files in this project present the user interface for driving this rover. The HTML menu system is centralized in menu.py and the root menu is in index.html. The flexibility of HTML allows quick experimentation for different methods to present a rover user interface to the user. Several experimental UI are included and they all use the same underlying move_velocity_radius API of roverchassis.py.

Configurations and Modifications

Physical Geometry roverchassis.py requires knowing the physical layout of rover's wheels in order to properly calculate velocity and angle. Physical layout is described by specifying each wheel's (x,y) coordinate inside config_roverchassis.json. The coordinate system used is: Looking down on the rover from above, the front of the rover is the +Y axis and the right side of the rover is the +X axis. The center of the rover is the origin. The example length values in the repository are in inches, but any unit (either metric or imperial) may be used as long as they are used consistently. Since roverchassis.py calculations are made on their relative ratios.

Wheel Control Aside from physical geometry, config_roverchassis.json also specifies two motor controlls for each wheel. One for the rolling travel motion, and the other for steering control.

  • A freely rolling, undriven wheel will have null as its rolling control.
  • A wheel that has no steering motor will have null as its steering control.
  • It is valid to have a wheel that has null for both values. For example, a caster wheel.

RoboClaw Parameters When RoboClaw controller is used, relevant parameters must be present in config_roboclaw.json. See Ion Motion Control's RoboClaw documentation for details.

  • Connection parameters: serial port, baudrate, etc.
  • Velocity PID values must be present if RoboClaw is controlling any rolling travel motors.
  • Position PID values must be present if RoboClaw is controlling any steering motors.

Adafruit Servo HAT Parameters When Adafruit PWM HAT is used, relevant parameters must be present in config_adafruit_servo.json.

  • Connection parameters: I2C address, I2C bus, PWM frequency.
  • The following parameter for each of 16 servo addresses:
    • PWM value for center position.
    • Maximum travel range, expressed in degrees off center.
    • PWM value for the maximum positive travel. (Minimum is assumed symmetric and will be calculated from other parameters.)

UI Replacement The web-based UI (HTML/CSS/JavaScript served by Flask) can be completely replaced by another system if desired. One example is to use a gaming controller communicating over Bluetooth. This Bluetooth communication module can call move_velocity_radius API on roverchassis.py to utilize all the same code calculating velocity/angle and sending them to the motor controllers.

Additional Motor Controllers Other motor control classes may be added as peers of roboclaw_wrapper.py and adafruit_servo_wrapper.py. The new motor control module must be initialized in roverchassis.py method init_motorcontrollers(). Then its name may be used in config_roverchassis.json to specify its usage as wheel rolling or steering control.

About

Software for SGVHAK rover project.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •