Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

RFE: Split open permission #7

Open
stephensmalley opened this issue Nov 17, 2016 · 0 comments
Open

RFE: Split open permission #7

stephensmalley opened this issue Nov 17, 2016 · 0 comments

Comments

@stephensmalley
Copy link
Member

Split the open permission into open_read and open_write so that we can better distinguish them in policy. Presently we rely upon the fact that we already check read and write permissions in addition to open; however, this is not sufficient because we sometimes have to allow read or write permission for a descriptor inherited across execve or received over IPC, but still do not want to allow direct open(2) with those permissions.

@pcmoore pcmoore changed the title Split open permission RFE: Split open permission Nov 18, 2016
pcmoore pushed a commit that referenced this issue Dec 5, 2016
The trinity syscall fuzzer triggered following WARN() on powerpc:

  WARNING: CPU: 9 PID: 2998 at arch/powerpc/kernel/hw_breakpoint.c:278
  ...
  NIP [c00000000093aedc] .hw_breakpoint_handler+0x28c/0x2b0
  LR [c00000000093aed8] .hw_breakpoint_handler+0x288/0x2b0
  Call Trace:
  [c0000002f7933580] [c00000000093aed8] .hw_breakpoint_handler+0x288/0x2b0 (unreliable)
  [c0000002f7933630] [c0000000000f671c] .notifier_call_chain+0x7c/0xf0
  [c0000002f79336d0] [c0000000000f6abc] .__atomic_notifier_call_chain+0xbc/0x1c0
  [c0000002f7933780] [c0000000000f6c40] .notify_die+0x70/0xd0
  [c0000002f7933820] [c00000000001a74c] .do_break+0x4c/0x100
  [c0000002f7933920] [c0000000000089fc] handle_dabr_fault+0x14/0x48

Followed by a lockdep warning:

  ===============================
  [ INFO: suspicious RCU usage. ]
  4.8.0-rc5+ #7 Tainted: G        W
  -------------------------------
  ./include/linux/rcupdate.h:556 Illegal context switch in RCU read-side critical section!

  other info that might help us debug this:

  rcu_scheduler_active = 1, debug_locks = 0
  2 locks held by ls/2998:
   #0:  (rcu_read_lock){......}, at: [<c0000000000f6a00>] .__atomic_notifier_call_chain+0x0/0x1c0
   #1:  (rcu_read_lock){......}, at: [<c00000000093ac50>] .hw_breakpoint_handler+0x0/0x2b0

  stack backtrace:
  CPU: 9 PID: 2998 Comm: ls Tainted: G        W       4.8.0-rc5+ #7
  Call Trace:
  [c0000002f7933150] [c00000000094b1f8] .dump_stack+0xe0/0x14c (unreliable)
  [c0000002f79331e0] [c00000000013c468] .lockdep_rcu_suspicious+0x138/0x180
  [c0000002f7933270] [c0000000001005d8] .___might_sleep+0x278/0x2e0
  [c0000002f7933300] [c000000000935584] .mutex_lock_nested+0x64/0x5a0
  [c0000002f7933410] [c00000000023084c] .perf_event_ctx_lock_nested+0x16c/0x380
  [c0000002f7933500] [c000000000230a80] .perf_event_disable+0x20/0x60
  [c0000002f7933580] [c00000000093aeec] .hw_breakpoint_handler+0x29c/0x2b0
  [c0000002f7933630] [c0000000000f671c] .notifier_call_chain+0x7c/0xf0
  [c0000002f79336d0] [c0000000000f6abc] .__atomic_notifier_call_chain+0xbc/0x1c0
  [c0000002f7933780] [c0000000000f6c40] .notify_die+0x70/0xd0
  [c0000002f7933820] [c00000000001a74c] .do_break+0x4c/0x100
  [c0000002f7933920] [c0000000000089fc] handle_dabr_fault+0x14/0x48

While it looks like the first WARN() is probably valid, the other one is
triggered by disabling event via perf_event_disable() from atomic context.

The event is disabled here in case we were not able to emulate
the instruction that hit the breakpoint. By disabling the event
we unschedule the event and make sure it's not scheduled back.

But we can't call perf_event_disable() from atomic context, instead
we need to use the event's pending_disable irq_work method to disable it.

Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161026094824.GA21397@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
pcmoore pushed a commit that referenced this issue May 17, 2017
Yuval Mintz says:

====================
qed: Fixes series

This address several different issues in qed.
The more significant portions:

Patch #1 would cause timeout when qedr utilizes the highest
CIDs availble for it [or when future qede adapters would utilize
queues in some constellations].

Patch #4 fixes a leak of mapped addresses; When iommu is enabled,
offloaded storage protocols might eventually run out of resources
and fail to map additional buffers.

Patches #6,#7 were missing in the initial iSCSI infrastructure
submissions, and would hamper qedi's stability when it reaches
out-of-order scenarios.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
pcmoore pushed a commit that referenced this issue May 17, 2017
Dmitry reported a lockdep splat [1] (false positive) that we can fix
by releasing the spinlock before calling icmp_send() from ip_expire()

This is a false positive because sending an ICMP message can not
possibly re-enter the IP frag engine.

[1]
[ INFO: possible circular locking dependency detected ]
4.10.0+ #29 Not tainted
-------------------------------------------------------
modprobe/12392 is trying to acquire lock:
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] spin_lock
include/linux/spinlock.h:299 [inline]
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>] __netif_tx_lock
include/linux/netdevice.h:3486 [inline]
 (_xmit_ETHER#2){+.-...}, at: [<ffffffff837a8182>]
sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180

but task is already holding lock:
 (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock
include/linux/spinlock.h:299 [inline]
 (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>]
ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&(&q->lock)->rlock){+.-...}:
       validate_chain kernel/locking/lockdep.c:2267 [inline]
       __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
       lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
       __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
       _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
       spin_lock include/linux/spinlock.h:299 [inline]
       ip_defrag+0x3a2/0x4130 net/ipv4/ip_fragment.c:669
       ip_check_defrag+0x4e3/0x8b0 net/ipv4/ip_fragment.c:713
       packet_rcv_fanout+0x282/0x800 net/packet/af_packet.c:1459
       deliver_skb net/core/dev.c:1834 [inline]
       dev_queue_xmit_nit+0x294/0xa90 net/core/dev.c:1890
       xmit_one net/core/dev.c:2903 [inline]
       dev_hard_start_xmit+0x16b/0xab0 net/core/dev.c:2923
       sch_direct_xmit+0x31f/0x6d0 net/sched/sch_generic.c:182
       __dev_xmit_skb net/core/dev.c:3092 [inline]
       __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
       dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
       neigh_resolve_output+0x6b9/0xb10 net/core/neighbour.c:1308
       neigh_output include/net/neighbour.h:478 [inline]
       ip_finish_output2+0x8b8/0x15a0 net/ipv4/ip_output.c:228
       ip_do_fragment+0x1d93/0x2720 net/ipv4/ip_output.c:672
       ip_fragment.constprop.54+0x145/0x200 net/ipv4/ip_output.c:545
       ip_finish_output+0x82d/0xe10 net/ipv4/ip_output.c:314
       NF_HOOK_COND include/linux/netfilter.h:246 [inline]
       ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
       dst_output include/net/dst.h:486 [inline]
       ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
       ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
       ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
       raw_sendmsg+0x26de/0x3a00 net/ipv4/raw.c:655
       inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761
       sock_sendmsg_nosec net/socket.c:633 [inline]
       sock_sendmsg+0xca/0x110 net/socket.c:643
       ___sys_sendmsg+0x4a3/0x9f0 net/socket.c:1985
       __sys_sendmmsg+0x25c/0x750 net/socket.c:2075
       SYSC_sendmmsg net/socket.c:2106 [inline]
       SyS_sendmmsg+0x35/0x60 net/socket.c:2101
       do_syscall_64+0x2e8/0x930 arch/x86/entry/common.c:281
       return_from_SYSCALL_64+0x0/0x7a

-> #0 (_xmit_ETHER#2){+.-...}:
       check_prev_add kernel/locking/lockdep.c:1830 [inline]
       check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940
       validate_chain kernel/locking/lockdep.c:2267 [inline]
       __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
       lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
       __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
       _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
       spin_lock include/linux/spinlock.h:299 [inline]
       __netif_tx_lock include/linux/netdevice.h:3486 [inline]
       sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180
       __dev_xmit_skb net/core/dev.c:3092 [inline]
       __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
       dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
       neigh_hh_output include/net/neighbour.h:468 [inline]
       neigh_output include/net/neighbour.h:476 [inline]
       ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228
       ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316
       NF_HOOK_COND include/linux/netfilter.h:246 [inline]
       ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
       dst_output include/net/dst.h:486 [inline]
       ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
       ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
       ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
       icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394
       icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754
       ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239
       call_timer_fn+0x241/0x820 kernel/time/timer.c:1268
       expire_timers kernel/time/timer.c:1307 [inline]
       __run_timers+0x960/0xcf0 kernel/time/timer.c:1601
       run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614
       __do_softirq+0x31f/0xbe7 kernel/softirq.c:284
       invoke_softirq kernel/softirq.c:364 [inline]
       irq_exit+0x1cc/0x200 kernel/softirq.c:405
       exiting_irq arch/x86/include/asm/apic.h:657 [inline]
       smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962
       apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707
       __read_once_size include/linux/compiler.h:254 [inline]
       atomic_read arch/x86/include/asm/atomic.h:26 [inline]
       rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline]
       __rcu_is_watching kernel/rcu/tree.c:1133 [inline]
       rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147
       rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293
       radix_tree_deref_slot include/linux/radix-tree.h:238 [inline]
       filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335
       do_fault_around mm/memory.c:3231 [inline]
       do_read_fault mm/memory.c:3265 [inline]
       do_fault+0xbd5/0x2080 mm/memory.c:3370
       handle_pte_fault mm/memory.c:3600 [inline]
       __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714
       handle_mm_fault+0x1e2/0x480 mm/memory.c:3751
       __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397
       do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460
       page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&q->lock)->rlock);
                               lock(_xmit_ETHER#2);
                               lock(&(&q->lock)->rlock);
  lock(_xmit_ETHER#2);

 *** DEADLOCK ***

10 locks held by modprobe/12392:
 #0:  (&mm->mmap_sem){++++++}, at: [<ffffffff81329758>]
__do_page_fault+0x2b8/0xb60 arch/x86/mm/fault.c:1336
 #1:  (rcu_read_lock){......}, at: [<ffffffff8188cab6>]
filemap_map_pages+0x1e6/0x1570 mm/filemap.c:2324
 #2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
spin_lock include/linux/spinlock.h:299 [inline]
 #2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
pte_alloc_one_map mm/memory.c:2944 [inline]
 #2:  (&(ptlock_ptr(page))->rlock#2){+.+...}, at: [<ffffffff81984a78>]
alloc_set_pte+0x13b8/0x1b90 mm/memory.c:3072
 #3:  (((&q->timer))){+.-...}, at: [<ffffffff81627e72>]
lockdep_copy_map include/linux/lockdep.h:175 [inline]
 #3:  (((&q->timer))){+.-...}, at: [<ffffffff81627e72>]
call_timer_fn+0x1c2/0x820 kernel/time/timer.c:1258
 #4:  (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>] spin_lock
include/linux/spinlock.h:299 [inline]
 #4:  (&(&q->lock)->rlock){+.-...}, at: [<ffffffff8389a4d1>]
ip_expire+0x51/0x6c0 net/ipv4/ip_fragment.c:201
 #5:  (rcu_read_lock){......}, at: [<ffffffff8389a633>]
ip_expire+0x1b3/0x6c0 net/ipv4/ip_fragment.c:216
 #6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] spin_trylock
include/linux/spinlock.h:309 [inline]
 #6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>] icmp_xmit_lock
net/ipv4/icmp.c:219 [inline]
 #6:  (slock-AF_INET){+.-...}, at: [<ffffffff839b3313>]
icmp_send+0x803/0x1c80 net/ipv4/icmp.c:681
 #7:  (rcu_read_lock_bh){......}, at: [<ffffffff838ab9a1>]
ip_finish_output2+0x2c1/0x15a0 net/ipv4/ip_output.c:198
 #8:  (rcu_read_lock_bh){......}, at: [<ffffffff836d1dee>]
__dev_queue_xmit+0x23e/0x1e60 net/core/dev.c:3324
 #9:  (dev->qdisc_running_key ?: &qdisc_running_key){+.....}, at:
[<ffffffff836d3a27>] dev_queue_xmit+0x17/0x20 net/core/dev.c:3423

stack backtrace:
CPU: 0 PID: 12392 Comm: modprobe Not tainted 4.10.0+ #29
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:16 [inline]
 dump_stack+0x2ee/0x3ef lib/dump_stack.c:52
 print_circular_bug+0x307/0x3b0 kernel/locking/lockdep.c:1204
 check_prev_add kernel/locking/lockdep.c:1830 [inline]
 check_prevs_add+0xa8f/0x19f0 kernel/locking/lockdep.c:1940
 validate_chain kernel/locking/lockdep.c:2267 [inline]
 __lock_acquire+0x2149/0x3430 kernel/locking/lockdep.c:3340
 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x33/0x50 kernel/locking/spinlock.c:151
 spin_lock include/linux/spinlock.h:299 [inline]
 __netif_tx_lock include/linux/netdevice.h:3486 [inline]
 sch_direct_xmit+0x282/0x6d0 net/sched/sch_generic.c:180
 __dev_xmit_skb net/core/dev.c:3092 [inline]
 __dev_queue_xmit+0x13e5/0x1e60 net/core/dev.c:3358
 dev_queue_xmit+0x17/0x20 net/core/dev.c:3423
 neigh_hh_output include/net/neighbour.h:468 [inline]
 neigh_output include/net/neighbour.h:476 [inline]
 ip_finish_output2+0xf6c/0x15a0 net/ipv4/ip_output.c:228
 ip_finish_output+0xa29/0xe10 net/ipv4/ip_output.c:316
 NF_HOOK_COND include/linux/netfilter.h:246 [inline]
 ip_output+0x1f0/0x7a0 net/ipv4/ip_output.c:404
 dst_output include/net/dst.h:486 [inline]
 ip_local_out+0x95/0x170 net/ipv4/ip_output.c:124
 ip_send_skb+0x3c/0xc0 net/ipv4/ip_output.c:1492
 ip_push_pending_frames+0x64/0x80 net/ipv4/ip_output.c:1512
 icmp_push_reply+0x372/0x4d0 net/ipv4/icmp.c:394
 icmp_send+0x156c/0x1c80 net/ipv4/icmp.c:754
 ip_expire+0x40e/0x6c0 net/ipv4/ip_fragment.c:239
 call_timer_fn+0x241/0x820 kernel/time/timer.c:1268
 expire_timers kernel/time/timer.c:1307 [inline]
 __run_timers+0x960/0xcf0 kernel/time/timer.c:1601
 run_timer_softirq+0x21/0x80 kernel/time/timer.c:1614
 __do_softirq+0x31f/0xbe7 kernel/softirq.c:284
 invoke_softirq kernel/softirq.c:364 [inline]
 irq_exit+0x1cc/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:657 [inline]
 smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:962
 apic_timer_interrupt+0x93/0xa0 arch/x86/entry/entry_64.S:707
RIP: 0010:__read_once_size include/linux/compiler.h:254 [inline]
RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline]
RIP: 0010:rcu_dynticks_curr_cpu_in_eqs kernel/rcu/tree.c:350 [inline]
RIP: 0010:__rcu_is_watching kernel/rcu/tree.c:1133 [inline]
RIP: 0010:rcu_is_watching+0x83/0x110 kernel/rcu/tree.c:1147
RSP: 0000:ffff8801c391f120 EFLAGS: 00000a03 ORIG_RAX: ffffffffffffff10
RAX: dffffc0000000000 RBX: ffff8801c391f148 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 000055edd4374000 RDI: ffff8801dbe1ae0c
RBP: ffff8801c391f1a0 R08: 0000000000000002 R09: 0000000000000000
R10: dffffc0000000000 R11: 0000000000000002 R12: 1ffff10038723e25
R13: ffff8801dbe1ae00 R14: ffff8801c391f680 R15: dffffc0000000000
 </IRQ>
 rcu_read_lock_held+0x87/0xc0 kernel/rcu/update.c:293
 radix_tree_deref_slot include/linux/radix-tree.h:238 [inline]
 filemap_map_pages+0x6d4/0x1570 mm/filemap.c:2335
 do_fault_around mm/memory.c:3231 [inline]
 do_read_fault mm/memory.c:3265 [inline]
 do_fault+0xbd5/0x2080 mm/memory.c:3370
 handle_pte_fault mm/memory.c:3600 [inline]
 __handle_mm_fault+0x1062/0x2cb0 mm/memory.c:3714
 handle_mm_fault+0x1e2/0x480 mm/memory.c:3751
 __do_page_fault+0x4f6/0xb60 arch/x86/mm/fault.c:1397
 do_page_fault+0x54/0x70 arch/x86/mm/fault.c:1460
 page_fault+0x28/0x30 arch/x86/entry/entry_64.S:1011
RIP: 0033:0x7f83172f2786
RSP: 002b:00007fffe859ae80 EFLAGS: 00010293
RAX: 000055edd4373040 RBX: 00007f83175111c8 RCX: 000055edd4373238
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00007f8317510970
RBP: 00007fffe859afd0 R08: 0000000000000009 R09: 0000000000000000
R10: 0000000000000064 R11: 0000000000000000 R12: 000055edd4373040
R13: 0000000000000000 R14: 00007fffe859afe8 R15: 0000000000000000

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pcmoore pushed a commit that referenced this issue Sep 5, 2017
…n exit"

------------[ cut here ]------------
 WARNING: CPU: 5 PID: 2288 at arch/x86/kvm/vmx.c:11124 nested_vmx_vmexit+0xd64/0xd70 [kvm_intel]
 CPU: 5 PID: 2288 Comm: qemu-system-x86 Not tainted 4.13.0-rc2+ #7
 RIP: 0010:nested_vmx_vmexit+0xd64/0xd70 [kvm_intel]
Call Trace:
  vmx_check_nested_events+0x131/0x1f0 [kvm_intel]
  ? vmx_check_nested_events+0x131/0x1f0 [kvm_intel]
  kvm_arch_vcpu_ioctl_run+0x5dd/0x1be0 [kvm]
  ? vmx_vcpu_load+0x1be/0x220 [kvm_intel]
  ? kvm_arch_vcpu_load+0x62/0x230 [kvm]
  kvm_vcpu_ioctl+0x340/0x700 [kvm]
  ? kvm_vcpu_ioctl+0x340/0x700 [kvm]
  ? __fget+0xfc/0x210
  do_vfs_ioctl+0xa4/0x6a0
  ? __fget+0x11d/0x210
  SyS_ioctl+0x79/0x90
  do_syscall_64+0x8f/0x750
  ? trace_hardirqs_on_thunk+0x1a/0x1c
  entry_SYSCALL64_slow_path+0x25/0x25

This can be reproduced by booting L1 guest w/ 'noapic' grub parameter, which
means that tells the kernel to not make use of any IOAPICs that may be present
in the system.

Actually external_intr variable in nested_vmx_vmexit() is the req_int_win
variable passed from vcpu_enter_guest() which means that the L0's userspace
requests an irq window. I observed the scenario (!kvm_cpu_has_interrupt(vcpu) &&
L0's userspace reqeusts an irq window) is true, so there is no interrupt which
L1 requires to inject to L2, we should not attempt to emualte "Acknowledge
interrupt on exit" for the irq window requirement in this scenario.

This patch fixes it by not attempt to emulate "Acknowledge interrupt on exit"
if there is no L1 requirement to inject an interrupt to L2.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
[Added code comment to make it obvious that the behavior is not correct.
 We should do a userspace exit with open interrupt window instead of the
 nested VM exit.  This patch still improves the behavior, so it was
 accepted as a (temporary) workaround.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
pcmoore pushed a commit that referenced this issue Sep 5, 2017
If we do not have a master network device attached dst->cpu_dp will be
NULL and accessing cpu_dp->netdev will create a trace similar to the one
below. The correct check is on dst->cpu_dp period.

[    1.004650] DSA: switch 0 0 parsed
[    1.008078] Unable to handle kernel NULL pointer dereference at
virtual address 00000010
[    1.016195] pgd = c0003000
[    1.018918] [00000010] *pgd=80000000004003, *pmd=00000000
[    1.024349] Internal error: Oops: 206 [#1] SMP ARM
[    1.029157] Modules linked in:
[    1.032228] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.13.0-rc6-00071-g45b45afab9bd-dirty #7
[    1.040772] Hardware name: Broadcom STB (Flattened Device Tree)
[    1.046704] task: ee08f840 task.stack: ee090000
[    1.051258] PC is at dsa_register_switch+0x5e0/0x9dc
[    1.056234] LR is at dsa_register_switch+0x5d0/0x9dc
[    1.061211] pc : [<c08fb28c>]    lr : [<c08fb27c>]    psr: 60000213
[    1.067491] sp : ee091d88  ip : 00000000  fp : 0000000c
[    1.072728] r10: 00000000  r9 : 00000001  r8 : ee208010
[    1.077965] r7 : ee2b57b0  r6 : ee2b5780  r5 : 00000000  r4 :
ee208e0c
[    1.084506] r3 : 00000000  r2 : 00040d00  r1 : 2d1b2000  r0 :
00000016
[    1.091050] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM
Segment user
[    1.098199] Control: 32c5387d  Table: 00003000  DAC: fffffffd
[    1.103957] Process swapper/0 (pid: 1, stack limit = 0xee090210)

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6d3c8c0 ("net: dsa: Remove master_netdev and use dst->cpu_dp->netdev")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
stephensmalley pushed a commit to stephensmalley/selinux-kernel that referenced this issue Apr 17, 2018
Patch series "kexec_file, x86, powerpc: refactoring for other
architecutres", v2.

This is a preparatory patchset for adding kexec_file support on arm64.

It was originally included in a arm64 patch set[1], but Philipp is also
working on their kexec_file support on s390[2] and some changes are now
conflicting.

So these common parts were extracted and put into a separate patch set
for better integration.  What's more, my original patch#4 was split into
a few small chunks for easier review after Dave's comment.

As such, the resulting code is basically identical with my original, and
the only *visible* differences are:

 - renaming of _kexec_kernel_image_probe() and  _kimage_file_post_load_cleanup()

 - change one of types of arguments at prepare_elf64_headers()

Those, unfortunately, require a couple of trivial changes on the rest
(SELinuxProject#1, SELinuxProject#6 to SELinuxProject#13) of my arm64 kexec_file patch set[1].

Patch SELinuxProject#1 allows making a use of purgatory optional, particularly useful
for arm64.

Patch SELinuxProject#2 commonalizes arch_kexec_kernel_{image_probe, image_load,
verify_sig}() and arch_kimage_file_post_load_cleanup() across
architectures.

Patches SELinuxProject#3-SELinuxProject#7 are also intended to generalize parse_elf64_headers(),
along with exclude_mem_range(), to be made best re-use of.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-February/561182.html
[2] http://lkml.iu.edu//hypermail/linux/kernel/1802.1/02596.html

This patch (of 7):

On arm64, crash dump kernel's usable memory is protected by *unmapping*
it from kernel virtual space unlike other architectures where the region
is just made read-only.  It is highly unlikely that the region is
accidentally corrupted and this observation rationalizes that digest
check code can also be dropped from purgatory.  The resulting code is so
simple as it doesn't require a bit ugly re-linking/relocation stuff,
i.e.  arch_kexec_apply_relocations_add().

Please see:

   http://lists.infradead.org/pipermail/linux-arm-kernel/2017-December/545428.html

All that the purgatory does is to shuffle arguments and jump into a new
kernel, while we still need to have some space for a hash value
(purgatory_sha256_digest) which is never checked against.

As such, it doesn't make sense to have trampline code between old kernel
and new kernel on arm64.

This patch introduces a new configuration, ARCH_HAS_KEXEC_PURGATORY, and
allows related code to be compiled in only if necessary.

[takahiro.akashi@linaro.org: fix trivial screwup]
  Link: http://lkml.kernel.org/r/20180309093346.GF25863@linaro.org
Link: http://lkml.kernel.org/r/20180306102303.9063-2-takahiro.akashi@linaro.org
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Dave Young <dyoung@redhat.com>
Tested-by: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pcmoore pushed a commit that referenced this issue Oct 22, 2018
Fixes a crash when the report encounters an address that could not be
associated with an mmaped region:

  #0  0x00005555557bdc4a in callchain_srcline (ip=<error reading variable: Cannot access memory at address 0x38>, sym=0x0, map=0x0) at util/machine.c:2329
  #1  unwind_entry (entry=entry@entry=0x7fffffff9180, arg=arg@entry=0x7ffff5642498) at util/machine.c:2329
  #2  0x00005555558370af in entry (arg=0x7ffff5642498, cb=0x5555557bdb50 <unwind_entry>, thread=<optimized out>, ip=18446744073709551615) at util/unwind-libunwind-local.c:586
  #3  get_entries (ui=ui@entry=0x7fffffff9620, cb=0x5555557bdb50 <unwind_entry>, arg=0x7ffff5642498, max_stack=<optimized out>) at util/unwind-libunwind-local.c:703
  #4  0x0000555555837192 in _unwind__get_entries (cb=<optimized out>, arg=<optimized out>, thread=<optimized out>, data=<optimized out>, max_stack=<optimized out>) at util/unwind-libunwind-local.c:725
  #5  0x00005555557c310f in thread__resolve_callchain_unwind (max_stack=127, sample=0x7fffffff9830, evsel=0x555555c7b3b0, cursor=0x7ffff5642498, thread=0x555555c7f6f0) at util/machine.c:2351
  #6  thread__resolve_callchain (thread=0x555555c7f6f0, cursor=0x7ffff5642498, evsel=0x555555c7b3b0, sample=0x7fffffff9830, parent=0x7fffffff97b8, root_al=0x7fffffff9750, max_stack=127) at util/machine.c:2378
  #7  0x00005555557ba4ee in sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fffffff97b8, evsel=<optimized out>, al=al@entry=0x7fffffff9750,
      max_stack=<optimized out>) at util/callchain.c:1085

Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Tested-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 2a9d505 ("perf script: Show correct offsets for DWARF-based unwinding")
Link: http://lkml.kernel.org/r/20180926135207.30263-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pcmoore pushed a commit that referenced this issue Oct 22, 2018
The nft_set_gc_batch_check() checks whether gc buffer is full.
If gc buffer is full, gc buffer is released by
the nft_set_gc_batch_complete() internally.
In case of rbtree, the rb_erase() should be called before calling the
nft_set_gc_batch_complete(). therefore the rb_erase() should
be called before calling the nft_set_gc_batch_check() too.

test commands:
   table ip filter {
	   set set1 {
		   type ipv4_addr; flags interval, timeout;
		   gc-interval 10s;
		   timeout 1s;
		   elements = {
			   1-2,
			   3-4,
			   5-6,
			   ...
			   10000-10001,
		   }
	   }
   }
   %nft -f test.nft

splat looks like:
[  430.273885] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  430.282158] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  430.283116] CPU: 1 PID: 190 Comm: kworker/1:2 Tainted: G    B             4.18.0+ #7
[  430.283116] Workqueue: events_power_efficient nft_rbtree_gc [nf_tables_set]
[  430.313559] RIP: 0010:rb_next+0x81/0x130
[  430.313559] Code: 08 49 bd 00 00 00 00 00 fc ff df 48 bb 00 00 00 00 00 fc ff df 48 85 c0 75 05 eb 58 48 89 d4
[  430.313559] RSP: 0018:ffff88010cdb7680 EFLAGS: 00010207
[  430.313559] RAX: 0000000000b84854 RBX: dffffc0000000000 RCX: ffffffff83f01973
[  430.313559] RDX: 000000000017090c RSI: 0000000000000008 RDI: 0000000000b84864
[  430.313559] RBP: ffff8801060d4588 R08: fffffbfff09bc349 R09: fffffbfff09bc349
[  430.313559] R10: 0000000000000001 R11: fffffbfff09bc348 R12: ffff880100f081a8
[  430.313559] R13: dffffc0000000000 R14: ffff880100ff8688 R15: dffffc0000000000
[  430.313559] FS:  0000000000000000(0000) GS:ffff88011b400000(0000) knlGS:0000000000000000
[  430.313559] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  430.313559] CR2: 0000000001551008 CR3: 000000005dc16000 CR4: 00000000001006e0
[  430.313559] Call Trace:
[  430.313559]  nft_rbtree_gc+0x112/0x5c0 [nf_tables_set]
[  430.313559]  process_one_work+0xc13/0x1ec0
[  430.313559]  ? _raw_spin_unlock_irq+0x29/0x40
[  430.313559]  ? pwq_dec_nr_in_flight+0x3c0/0x3c0
[  430.313559]  ? set_load_weight+0x270/0x270
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __switch_to_asm+0x40/0x70
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __switch_to_asm+0x40/0x70
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __switch_to_asm+0x40/0x70
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __switch_to_asm+0x40/0x70
[  430.313559]  ? __switch_to_asm+0x34/0x70
[  430.313559]  ? __schedule+0x6d3/0x1f50
[  430.313559]  ? find_held_lock+0x39/0x1c0
[  430.313559]  ? __sched_text_start+0x8/0x8
[  430.313559]  ? cyc2ns_read_end+0x10/0x10
[  430.313559]  ? save_trace+0x300/0x300
[  430.313559]  ? sched_clock_local+0xd4/0x140
[  430.313559]  ? find_held_lock+0x39/0x1c0
[  430.313559]  ? worker_thread+0x353/0x1120
[  430.313559]  ? worker_thread+0x353/0x1120
[  430.313559]  ? lock_contended+0xe70/0xe70
[  430.313559]  ? __lock_acquire+0x4500/0x4500
[  430.535635]  ? do_raw_spin_unlock+0xa5/0x330
[  430.535635]  ? do_raw_spin_trylock+0x101/0x1a0
[  430.535635]  ? do_raw_spin_lock+0x1f0/0x1f0
[  430.535635]  ? _raw_spin_lock_irq+0x10/0x70
[  430.535635]  worker_thread+0x15d/0x1120
[ ... ]

Fixes: 8d8540c ("netfilter: nft_set_rbtree: add timeout support")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
pcmoore pushed a commit that referenced this issue Mar 18, 2019
As Jiqun Li reported in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=202883

sometimes, dead lock when make system call SYS_getdents64 with fsync() is
called by another process.

monkey running on android9.0

1.  task 9785 held sbi->cp_rwsem and waiting lock_page()
2.  task 10349 held mm_sem and waiting sbi->cp_rwsem
3. task 9709 held lock_page() and waiting mm_sem

so this is a dead lock scenario.

task stack is show by crash tools as following

crash_arm64> bt ffffffc03c354080
PID: 9785   TASK: ffffffc03c354080  CPU: 1   COMMAND: "RxIoScheduler-3"
>> #7 [ffffffc01b50fac0] __lock_page at ffffff80081b11e8

crash-arm64> bt 10349
PID: 10349  TASK: ffffffc018b83080  CPU: 1   COMMAND: "BUGLY_ASYNC_UPL"
>> #3 [ffffffc01f8cfa40] rwsem_down_read_failed at ffffff8008a93afc
     PC: 00000033  LR: 00000000  SP: 00000000  PSTATE: ffffffffffffffff

crash-arm64> bt 9709
PID: 9709   TASK: ffffffc03e7f3080  CPU: 1   COMMAND: "IntentService[A"
>> #3 [ffffffc001e67850] rwsem_down_read_failed at ffffff8008a93afc
>> #8 [ffffffc001e67b80] el1_ia at ffffff8008084fc4
     PC: ffffff8008274114  [compat_filldir64+120]
     LR: ffffff80083584d4  [f2fs_fill_dentries+448]
     SP: ffffffc001e67b80  PSTATE: 80400145
    X29: ffffffc001e67b80  X28: 0000000000000000  X27: 000000000000001a
    X26: 00000000000093d7  X25: ffffffc070d52480  X24: 0000000000000008
    X23: 0000000000000028  X22: 00000000d43dfd60  X21: ffffffc001e67e90
    X20: 0000000000000011  X19: ffffff80093a4000  X18: 0000000000000000
    X17: 0000000000000000  X16: 0000000000000000  X15: 0000000000000000
    X14: ffffffffffffffff  X13: 0000000000000008  X12: 0101010101010101
    X11: 7f7f7f7f7f7f7f7f  X10: 6a6a6a6a6a6a6a6a   X9: 7f7f7f7f7f7f7f7f
     X8: 0000000080808000   X7: ffffff800827409c   X6: 0000000080808000
     X5: 0000000000000008   X4: 00000000000093d7   X3: 000000000000001a
     X2: 0000000000000011   X1: ffffffc070d52480   X0: 0000000000800238
>> #9 [ffffffc001e67be0] f2fs_fill_dentries at ffffff80083584d0
     PC: 0000003c  LR: 00000000  SP: 00000000  PSTATE: 000000d9
    X12: f48a02ff X11: d4678960 X10: d43dfc00  X9: d4678ae4
     X8: 00000058  X7: d4678994  X6: d43de800  X5: 000000d9
     X4: d43dfc0c  X3: d43dfc10  X2: d46799c8  X1: 00000000
     X0: 00001068

Below potential deadlock will happen between three threads:
Thread A		Thread B		Thread C
- f2fs_do_sync_file
 - f2fs_write_checkpoint
  - down_write(&sbi->node_change) -- 1)
			- do_page_fault
			 - down_write(&mm->mmap_sem) -- 2)
			  - do_wp_page
			   - f2fs_vm_page_mkwrite
						- getdents64
						 - f2fs_read_inline_dir
						  - lock_page -- 3)
  - f2fs_sync_node_pages
   - lock_page -- 3)
			    - __do_map_lock
			     - down_read(&sbi->node_change) -- 1)
						  - f2fs_fill_dentries
						   - dir_emit
						    - compat_filldir64
						     - do_page_fault
						      - down_read(&mm->mmap_sem) -- 2)

Since f2fs_readdir is protected by inode.i_rwsem, there should not be
any updates in inode page, we're safe to lookup dents in inode page
without its lock held, so taking off the lock to improve concurrency
of readdir and avoid potential deadlock.

Reported-by: Jiqun Li <jiqun.li@unisoc.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
pcmoore pushed a commit that referenced this issue Nov 14, 2021
Host crashes when pci_enable_atomic_ops_to_root() is called for VFs with
virtual buses. The virtual buses added to SR-IOV have bus->self set to NULL
and host crashes due to this.

  PID: 4481   TASK: ffff89c6941b0000  CPU: 53  COMMAND: "bash"
  ...
   #3 [ffff9a9481713808] oops_end at ffffffffb9025cd6
   #4 [ffff9a9481713828] page_fault_oops at ffffffffb906e417
   #5 [ffff9a9481713888] exc_page_fault at ffffffffb9a0ad14
   #6 [ffff9a94817138b0] asm_exc_page_fault at ffffffffb9c00ace
      [exception RIP: pcie_capability_read_dword+28]
      RIP: ffffffffb952fd5c  RSP: ffff9a9481713960  RFLAGS: 00010246
      RAX: 0000000000000001  RBX: ffff89c6b1096000  RCX: 0000000000000000
      RDX: ffff9a9481713990  RSI: 0000000000000024  RDI: 0000000000000000
      RBP: 0000000000000080   R8: 0000000000000008   R9: ffff89c64341a2f8
      R10: 0000000000000002  R11: 0000000000000000  R12: ffff89c648bab000
      R13: 0000000000000000  R14: 0000000000000000  R15: ffff89c648bab0c8
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
   #7 [ffff9a9481713988] pci_enable_atomic_ops_to_root at ffffffffb95359a6
   #8 [ffff9a94817139c0] bnxt_qplib_determine_atomics at ffffffffc08c1a33 [bnxt_re]
   #9 [ffff9a94817139d0] bnxt_re_dev_init at ffffffffc08ba2d1 [bnxt_re]

Per PCIe r5.0, sec 9.3.5.10, the AtomicOp Requester Enable bit in Device
Control 2 is reserved for VFs.  The PF value applies to all associated VFs.

Return -EINVAL if pci_enable_atomic_ops_to_root() is called for a VF.

Link: https://lore.kernel.org/r/1631354585-16597-1-git-send-email-selvin.xavier@broadcom.com
Fixes: 35f5ace ("RDMA/bnxt_re: Enable global atomic ops if platform supports")
Fixes: 430a236 ("PCI: Add pci_enable_atomic_ops_to_root()")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
pcmoore pushed a commit that referenced this issue Nov 14, 2021
After removing /dev/kmem, sanitizing /proc/kcore and handling /dev/mem,
this series tackles the last sane way how a VM could accidentially
access logically unplugged memory managed by a virtio-mem device:
/proc/vmcore

When dumping memory via "makedumpfile", PG_offline pages, used by
virtio-mem to flag logically unplugged memory, are already properly
excluded; however, especially when accessing/copying /proc/vmcore "the
usual way", we can still end up reading logically unplugged memory part
of a virtio-mem device.

Patch #1-#3 are cleanups.  Patch #4 extends the existing
oldmem_pfn_is_ram mechanism.  Patch #5-#7 are virtio-mem refactorings
for patch #8, which implements the virtio-mem logic to query the state
of device blocks.

Patch #8:
 "Although virtio-mem currently supports reading unplugged memory in the
  hypervisor, this will change in the future, indicated to the device
  via a new feature flag. We similarly sanitized /proc/kcore access
  recently.
  [...]
  Distributions that support virtio-mem+kdump have to make sure that the
  virtio_mem module will be part of the kdump kernel or the kdump
  initrd; dracut was recently [2] extended to include virtio-mem in the
  generated initrd. As long as no special kdump kernels are used, this
  will automatically make sure that virtio-mem will be around in the
  kdump initrd and sanitize /proc/vmcore access -- with dracut"

This is the last remaining bit to support
VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE [3] in the Linux implementation of
virtio-mem.

Note: this is best-effort.  We'll never be able to control what runs
inside the second kernel, really, but we also don't have to care: we
only care about sane setups where we don't want our VM getting zapped
once we touch the wrong memory location while dumping.  While we usually
expect sane setups to use "makedumfile", nothing really speaks against
just copying /proc/vmcore, especially in environments where HWpoisioning
isn't typically expected.  Also, we really don't want to put all our
trust completely on the memmap, so sanitizing also makes sense when just
using "makedumpfile".

[1] https://lkml.kernel.org/r/20210526093041.8800-1-david@redhat.com
[2] dracutdevs/dracut#1157
[3] https://lists.oasis-open.org/archives/virtio-comment/202109/msg00021.html

This patch (of 9):

The callback is only used for the vmcore nowadays.

Link: https://lkml.kernel.org/r/20211005121430.30136-1-david@redhat.com
Link: https://lkml.kernel.org/r/20211005121430.30136-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrvsky@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pcmoore pushed a commit that referenced this issue Nov 18, 2021
The exit function fixes a memory leak with the src field as detected by
leak sanitizer. An example of which is:

Indirect leak of 25133184 byte(s) in 207 object(s) allocated from:
    #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154
    #1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803
    #2 0x55defe6397e4 in symbol__hists util/annotate.c:952
    #3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968
    #4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119
    #5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182
    #6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236
    #7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315
    #8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473
    #9 0x55defe731e38 in machines__deliver_event util/session.c:1510
    #10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590
    #11 0x55defe72951e in ordered_events__deliver_event util/session.c:183
    #12 0x55defe740082 in do_flush util/ordered-events.c:244
    #13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323
    #14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341
    #15 0x55defe73837f in __perf_session__process_events util/session.c:2390
    #16 0x55defe7385ff in perf_session__process_events util/session.c:2420
    ...

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pcmoore pushed a commit that referenced this issue Feb 2, 2022
If the key is already present then free the key used for lookup.

Found with:
$ perf stat -M IO_Read_BW /bin/true

==1749112==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 32 byte(s) in 4 object(s) allocated from:
    #0 0x7f6f6fa7d7cf in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
    #1 0x55acecd9d7a6 in check_per_pkg util/stat.c:343
    #2 0x55acecd9d9c5 in process_counter_values util/stat.c:365
    #3 0x55acecd9e0ab in process_counter_maps util/stat.c:421
    #4 0x55acecd9e292 in perf_stat_process_counter util/stat.c:443
    #5 0x55aceca8553e in read_counters ./tools/perf/builtin-stat.c:470
    #6 0x55aceca88fe3 in __run_perf_stat ./tools/perf/builtin-stat.c:1023
    #7 0x55aceca89146 in run_perf_stat ./tools/perf/builtin-stat.c:1048
    #8 0x55aceca90858 in cmd_stat ./tools/perf/builtin-stat.c:2555
    #9 0x55acecc05fa5 in run_builtin ./tools/perf/perf.c:313
    #10 0x55acecc064fe in handle_internal_command ./tools/perf/perf.c:365
    #11 0x55acecc068bb in run_argv ./tools/perf/perf.c:409
    #12 0x55acecc070aa in main ./tools/perf/perf.c:539

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: zhengjun.xing@intel.com
Link: https://lore.kernel.org/r/20220105061351.120843-24-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pcmoore pushed a commit that referenced this issue Feb 2, 2022
Change the cifs filesystem to take account of the changes to fscache's
indexing rewrite and reenable caching in cifs.

The following changes have been made:

 (1) The fscache_netfs struct is no more, and there's no need to register
     the filesystem as a whole.

 (2) The session cookie is now an fscache_volume cookie, allocated with
     fscache_acquire_volume().  That takes three parameters: a string
     representing the "volume" in the index, a string naming the cache to
     use (or NULL) and a u64 that conveys coherency metadata for the
     volume.

     For cifs, I've made it render the volume name string as:

	"cifs,<ipaddress>,<sharename>"

     where the sharename has '/' characters replaced with ';'.

     This probably needs rethinking a bit as the total name could exceed
     the maximum filename component length.

     Further, the coherency data is currently just set to 0.  It needs
     something else doing with it - I wonder if it would suffice simply to
     sum the resource_id, vol_create_time and vol_serial_number or maybe
     hash them.

 (3) The fscache_cookie_def is no more and needed information is passed
     directly to fscache_acquire_cookie().  The cache no longer calls back
     into the filesystem, but rather metadata changes are indicated at
     other times.

     fscache_acquire_cookie() is passed the same keying and coherency
     information as before.

 (4) The functions to set/reset cookies are removed and
     fscache_use_cookie() and fscache_unuse_cookie() are used instead.

     fscache_use_cookie() is passed a flag to indicate if the cookie is
     opened for writing.  fscache_unuse_cookie() is passed updates for the
     metadata if we changed it (ie. if the file was opened for writing).

     These are called when the file is opened or closed.

 (5) cifs_setattr_*() are made to call fscache_resize() to change the size
     of the cache object.

 (6) The functions to read and write data are stubbed out pending a
     conversion to use netfslib.

Changes
=======
ver #8:
 - Abstract cache invalidation into a helper function.
 - Fix some checkpatch warnings[3].

ver #7:
 - Removed the accidentally added-back call to get the super cookie in
   cifs_root_iget().
 - Fixed the right call to cifs_fscache_get_super_cookie() to take account
   of the "-o fsc" mount flag.

ver #6:
 - Moved the change of gfpflags_allow_blocking() to current_is_kswapd() for
   cifs here.
 - Fixed one of the error paths in cifs_atomic_open() to jump around the
   call to use the cookie.
 - Fixed an additional successful return in the middle of cifs_open() to
   use the cookie on the way out.
 - Only get a volume cookie (and thus inode cookies) when "-o fsc" is
   supplied to mount.

ver #5:
 - Fixed a couple of bits of cookie handling[2]:
   - The cookie should be released in cifs_evict_inode(), not
     cifsFileInfo_put_final().  The cookie needs to persist beyond file
     closure so that writepages will be able to write to it.
   - fscache_use_cookie() needs to be called in cifs_atomic_open() as it is
     for cifs_open().

ver #4:
 - Fixed the use of sizeof with memset.
 - tcon->vol_create_time is __le64 so doesn't need cpu_to_le64().

ver #3:
 - Canonicalise the cifs coherency data to make the cache portable.
 - Set volume coherency data.

ver #2:
 - Use gfpflags_allow_blocking() rather than using flag directly.
 - Upgraded to -rc4 to allow for upstream changes[1].
 - fscache_acquire_volume() now returns errors.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
cc: Steve French <smfrench@gmail.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: linux-cifs@vger.kernel.org
cc: linux-cachefs@redhat.com
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=23b55d673d7527b093cd97b7c217c82e70cd1af0 [1]
Link: https://lore.kernel.org/r/3419813.1641592362@warthog.procyon.org.uk/ [2]
Link: https://lore.kernel.org/r/CAH2r5muTanw9pJqzAHd01d9A8keeChkzGsCEH6=0rHutVLAF-A@mail.gmail.com/ [3]
Link: https://lore.kernel.org/r/163819671009.215744.11230627184193298714.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906982979.143852.10672081929614953210.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967187187.1823006.247415138444991444.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021579335.640689.2681324337038770579.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/3462849.1641593783@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/1318953.1642024578@warthog.procyon.org.uk/ # v6
Signed-off-by: Steve French <stfrench@microsoft.com>
pcmoore pushed a commit that referenced this issue Apr 4, 2022
As guest_irq is coming from KVM_IRQFD API call, it may trigger
crash in svm_update_pi_irte() due to out-of-bounds:

crash> bt
PID: 22218  TASK: ffff951a6ad74980  CPU: 73  COMMAND: "vcpu8"
 #0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397
 #1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d
 #2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d
 #3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d
 #4 [ffffb1ba6707fb90] no_context at ffffffff856692c9
 #5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51
 #6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace
    [exception RIP: svm_update_pi_irte+227]
    RIP: ffffffffc0761b53  RSP: ffffb1ba6707fd08  RFLAGS: 00010086
    RAX: ffffb1ba6707fd78  RBX: ffffb1ba66d91000  RCX: 0000000000000001
    RDX: 00003c803f63f1c0  RSI: 000000000000019a  RDI: ffffb1ba66db2ab8
    RBP: 000000000000019a   R8: 0000000000000040   R9: ffff94ca41b82200
    R10: ffffffffffffffcf  R11: 0000000000000001  R12: 0000000000000001
    R13: 0000000000000001  R14: ffffffffffffffcf  R15: 000000000000005f
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm]
 #8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm]
 #9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm]
    RIP: 00007f143c36488b  RSP: 00007f143a4e04b8  RFLAGS: 00000246
    RAX: ffffffffffffffda  RBX: 00007f05780041d0  RCX: 00007f143c36488b
    RDX: 00007f05780041d0  RSI: 000000004008ae6a  RDI: 0000000000000020
    RBP: 00000000000004e8   R8: 0000000000000008   R9: 00007f05780041e0
    R10: 00007f0578004560  R11: 0000000000000246  R12: 00000000000004e0
    R13: 000000000000001a  R14: 00007f1424001c60  R15: 00007f0578003bc0
    ORIG_RAX: 0000000000000010  CS: 0033  SS: 002b

Vmx have been fix this in commit 3a8b067 (KVM: VMX: Do not BUG() on
out-of-bounds guest IRQ), so we can just copy source from that to fix
this.

Co-developed-by: Yi Liu <liu.yi24@zte.com.cn>
Signed-off-by: Yi Liu <liu.yi24@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Message-Id: <20220309113025.44469-1-wang.yi59@zte.com.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pcmoore pushed a commit that referenced this issue May 17, 2022
While handling PCI errors (AER flow) driver tries to
disable NAPI [napi_disable()] after NAPI is deleted
[__netif_napi_del()] which causes unexpected system
hang/crash.

System message log shows the following:
=======================================
[ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures.
[ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)'
[ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports:
'need reset'
[ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports:
'need reset'
[ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset'
[ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow:
[ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows:
[ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow:
[ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows:
[ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset'
[ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->slot_reset()
[ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing...
[ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset
--> driver unload

Uninterruptible tasks
=====================
crash> ps | grep UN
     213      2  11  c000000004c89e00  UN   0.0       0      0  [eehd]
     215      2   0  c000000004c80000  UN   0.0       0      0
[kworker/0:2]
    2196      1  28  c000000004504f00  UN   0.1   15936  11136  wickedd
    4287      1   9  c00000020d076800  UN   0.0    4032   3008  agetty
    4289      1  20  c00000020d056680  UN   0.0    7232   3840  agetty
   32423      2  26  c00000020038c580  UN   0.0       0      0
[kworker/26:3]
   32871   4241  27  c0000002609ddd00  UN   0.1   18624  11648  sshd
   32920  10130  16  c00000027284a100  UN   0.1   48512  12608  sendmail
   33092  32987   0  c000000205218b00  UN   0.1   48512  12608  sendmail
   33154   4567  16  c000000260e51780  UN   0.1   48832  12864  pickup
   33209   4241  36  c000000270cb6500  UN   0.1   18624  11712  sshd
   33473  33283   0  c000000205211480  UN   0.1   48512  12672  sendmail
   33531   4241  37  c00000023c902780  UN   0.1   18624  11648  sshd

EEH handler hung while bnx2x sleeping and holding RTNL lock
===========================================================
crash> bt 213
PID: 213    TASK: c000000004c89e00  CPU: 11  COMMAND: "eehd"
  #0 [c000000004d477e0] __schedule at c000000000c70808
  #1 [c000000004d478b0] schedule at c000000000c70ee0
  #2 [c000000004d478e0] schedule_timeout at c000000000c76dec
  #3 [c000000004d479c0] msleep at c0000000002120cc
  #4 [c000000004d479f0] napi_disable at c000000000a06448
                                        ^^^^^^^^^^^^^^^^
  #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x]
  #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x]
  #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc
  #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8
  #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64

And the sleeping source code
============================
crash> dis -ls c000000000a06448
FILE: ../net/core/dev.c
LINE: 6702

   6697  {
   6698          might_sleep();
   6699          set_bit(NAPI_STATE_DISABLE, &n->state);
   6700
   6701          while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
* 6702                  msleep(1);
   6703          while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
   6704                  msleep(1);
   6705
   6706          hrtimer_cancel(&n->timer);
   6707
   6708          clear_bit(NAPI_STATE_DISABLE, &n->state);
   6709  }

EEH calls into bnx2x twice based on the system log above, first through
bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes
the following call chains:

bnx2x_io_error_detected()
  +-> bnx2x_eeh_nic_unload()
       +-> bnx2x_del_all_napi()
            +-> __netif_napi_del()

bnx2x_io_slot_reset()
  +-> bnx2x_netif_stop()
       +-> bnx2x_napi_disable()
            +->napi_disable()

Fix this by correcting the sequence of NAPI APIs usage,
that is delete the NAPI after disabling it.

Fixes: 7fa6f34 ("bnx2x: AER revised")
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pcmoore pushed a commit that referenced this issue May 17, 2022
These routines were not intended to be called under a spinlock and will
throw debugging warnings:

   raw_local_irq_restore() called with IRQs enabled
   WARNING: CPU: 13 PID: 3107 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x2f/0x50
   CPU: 13 PID: 3107 Comm: python3 Tainted: G            E     5.18.0-rc1+ #7
   Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
   RIP: 0010:warn_bogus_irq_restore+0x2f/0x50
   Call Trace:
    <TASK>
    _raw_spin_unlock_irqrestore+0x75/0x80
    rxe_attach_mcast+0x304/0x480 [rdma_rxe]
    ib_attach_mcast+0x88/0xa0 [ib_core]
    ib_uverbs_attach_mcast+0x186/0x1e0 [ib_uverbs]
    ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xcd/0x140 [ib_uverbs]
    ib_uverbs_cmd_verbs+0xdb0/0xea0 [ib_uverbs]
    ib_uverbs_ioctl+0xd2/0x160 [ib_uverbs]
    do_syscall_64+0x5c/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xae

Move them out of the spinlock, it is OK if there is some races setting up
the MC reception at the ethernet layer with rbtree lookups.

Fixes: 6090a0c ("RDMA/rxe: Cleanup rxe_mcast.c")
Link: https://lore.kernel.org/r/20220504202817.98247-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
pcmoore pushed a commit that referenced this issue May 23, 2022
Do not allow to write timestamps on RX rings if PF is being configured.
When PF is being configured RX rings can be freed or rebuilt. If at the
same time timestamps are updated, the kernel will crash by dereferencing
null RX ring pointer.

PID: 1449   TASK: ff187d28ed658040  CPU: 34  COMMAND: "ice-ptp-0000:51"
 #0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be
 #1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d
 #2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd
 #3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54
 #4 [ff1966a94a713d08] no_context at ffffffff9d06bda4
 #5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c
 #6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4
 #7 [ff1966a94a713de0] page_fault at ffffffff9da0107e
    [exception RIP: ice_ptp_update_cached_phctime+91]
    RIP: ffffffffc076db8b  RSP: ff1966a94a713e98  RFLAGS: 00010246
    RAX: 16e3db9c6b7ccae4  RBX: ff187d269dd3c180  RCX: ff187d269cd4d018
    RDX: 0000000000000000  RSI: 0000000000000000  RDI: 0000000000000000
    RBP: ff187d269cfcc644   R8: ff187d339b9641b0   R9: 0000000000000000
    R10: 0000000000000002  R11: 0000000000000000  R12: ff187d269cfcc648
    R13: ffffffff9f128784  R14: ffffffff9d101b70  R15: ff187d269cfcc640
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice]
 #9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b
 #10 [ff1966a94a713f10] kthread at ffffffff9d101b4d
 #11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f

Fixes: 77a7811 ("ice: enable receive hardware timestamping")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Dave Cain <dcain@redhat.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
pcmoore pushed a commit that referenced this issue Jun 16, 2022
Send along the already-allocated fattr along with nfs4_fs_locations, and
drop the memcpy of fattr.  We end up growing two more allocations, but this
fixes up a crash as:

PID: 790    TASK: ffff88811b43c000  CPU: 0   COMMAND: "ls"
 #0 [ffffc90000857920] panic at ffffffff81b9bfde
 #1 [ffffc900008579c0] do_trap at ffffffff81023a9b
 #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78
 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45
 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de
 #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs]
 #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f
 #7 [ffffc90000857c60] walk_component at ffffffff813a86c4
 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553
 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b

Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Fixes: 9558a00 ("NFS: Remove the label from the nfs4_lookup_res struct")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
pcmoore pushed a commit that referenced this issue Aug 15, 2022
The bpf_sys_bpf() helper function allows an eBPF program to load another
eBPF program from within the kernel. In this case the argument union
bpf_attr pointer (as well as the insns and license pointers inside) is a
kernel address instead of a userspace address (which is the case of a
usual bpf() syscall). To make the memory copying process in the syscall
work in both cases, bpfptr_t was introduced to wrap around the pointer
and distinguish its origin. Specifically, when copying memory contents
from a bpfptr_t, a copy_from_user() is performed in case of a userspace
address and a memcpy() is performed for a kernel address.

This can lead to problems because the in-kernel pointer is never checked
for validity. The problem happens when an eBPF syscall program tries to
call bpf_sys_bpf() to load a program but provides a bad insns pointer --
say 0xdeadbeef -- in the bpf_attr union. The helper calls __sys_bpf()
which would then call bpf_prog_load() to load the program.
bpf_prog_load() is responsible for copying the eBPF instructions to the
newly allocated memory for the program; it creates a kernel bpfptr_t for
insns and invokes copy_from_bpfptr(). Internally, all bpfptr_t
operations are backed by the corresponding sockptr_t operations, which
performs direct memcpy() on kernel pointers for copy_from/strncpy_from
operations. Therefore, the code is always happy to dereference the bad
pointer to trigger a un-handle-able page fault and in turn an oops.
However, this is not supposed to happen because at that point the eBPF
program is already verified and should not cause a memory error.

Sample KASAN trace:

[   25.685056][  T228] ==================================================================
[   25.685680][  T228] BUG: KASAN: user-memory-access in copy_from_bpfptr+0x21/0x30
[   25.686210][  T228] Read of size 80 at addr 00000000deadbeef by task poc/228
[   25.686732][  T228]
[   25.686893][  T228] CPU: 3 PID: 228 Comm: poc Not tainted 5.19.0-rc7 #7
[   25.687375][  T228] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS d55cb5a 04/01/2014
[   25.687991][  T228] Call Trace:
[   25.688223][  T228]  <TASK>
[   25.688429][  T228]  dump_stack_lvl+0x73/0x9e
[   25.688747][  T228]  print_report+0xea/0x200
[   25.689061][  T228]  ? copy_from_bpfptr+0x21/0x30
[   25.689401][  T228]  ? _printk+0x54/0x6e
[   25.689693][  T228]  ? _raw_spin_lock_irqsave+0x70/0xd0
[   25.690071][  T228]  ? copy_from_bpfptr+0x21/0x30
[   25.690412][  T228]  kasan_report+0xb5/0xe0
[   25.690716][  T228]  ? copy_from_bpfptr+0x21/0x30
[   25.691059][  T228]  kasan_check_range+0x2bd/0x2e0
[   25.691405][  T228]  ? copy_from_bpfptr+0x21/0x30
[   25.691734][  T228]  memcpy+0x25/0x60
[   25.692000][  T228]  copy_from_bpfptr+0x21/0x30
[   25.692328][  T228]  bpf_prog_load+0x604/0x9e0
[   25.692653][  T228]  ? cap_capable+0xb4/0xe0
[   25.692956][  T228]  ? security_capable+0x4f/0x70
[   25.693324][  T228]  __sys_bpf+0x3af/0x580
[   25.693635][  T228]  bpf_sys_bpf+0x45/0x240
[   25.693937][  T228]  bpf_prog_f0ec79a5a3caca46_bpf_func1+0xa2/0xbd
[   25.694394][  T228]  bpf_prog_run_pin_on_cpu+0x2f/0xb0
[   25.694756][  T228]  bpf_prog_test_run_syscall+0x146/0x1c0
[   25.695144][  T228]  bpf_prog_test_run+0x172/0x190
[   25.695487][  T228]  __sys_bpf+0x2c5/0x580
[   25.695776][  T228]  __x64_sys_bpf+0x3a/0x50
[   25.696084][  T228]  do_syscall_64+0x60/0x90
[   25.696393][  T228]  ? fpregs_assert_state_consistent+0x50/0x60
[   25.696815][  T228]  ? exit_to_user_mode_prepare+0x36/0xa0
[   25.697202][  T228]  ? syscall_exit_to_user_mode+0x20/0x40
[   25.697586][  T228]  ? do_syscall_64+0x6e/0x90
[   25.697899][  T228]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   25.698312][  T228] RIP: 0033:0x7f6d543fb759
[   25.698624][  T228] Code: 08 5b 89 e8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 a6 0e 00 f7 d8 64 89 01 48
[   25.699946][  T228] RSP: 002b:00007ffc3df78468 EFLAGS: 00000287 ORIG_RAX: 0000000000000141
[   25.700526][  T228] RAX: ffffffffffffffda RBX: 00007ffc3df78628 RCX: 00007f6d543fb759
[   25.701071][  T228] RDX: 0000000000000090 RSI: 00007ffc3df78478 RDI: 000000000000000a
[   25.701636][  T228] RBP: 00007ffc3df78510 R08: 0000000000000000 R09: 0000000000300000
[   25.702191][  T228] R10: 0000000000000005 R11: 0000000000000287 R12: 0000000000000000
[   25.702736][  T228] R13: 00007ffc3df78638 R14: 000055a1584aca68 R15: 00007f6d5456a000
[   25.703282][  T228]  </TASK>
[   25.703490][  T228] ==================================================================
[   25.704050][  T228] Disabling lock debugging due to kernel taint

Update copy_from_bpfptr() and strncpy_from_bpfptr() so that:
 - for a kernel pointer, it uses the safe copy_from_kernel_nofault() and
   strncpy_from_kernel_nofault() functions.
 - for a userspace pointer, it performs copy_from_user() and
   strncpy_from_user().

Fixes: af2ac3e ("bpf: Prepare bpf syscall to be used from kernel and user space.")
Link: https://lore.kernel.org/bpf/20220727132905.45166-1-jinghao@linux.ibm.com/
Signed-off-by: Jinghao Jia <jinghao@linux.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220729201713.88688-1-jinghao@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
pcmoore pushed a commit that referenced this issue Aug 15, 2022
When use 'echo c > /proc/sysrq-trigger' to trigger kdump, riscv_crash_save_regs()
will be called to save regs for vmcore, we found "epc" value 00ffffffa5537400
is not a valid kernel virtual address, but is a user virtual address. Other
regs(eg, ra, sp, gp...) are correct kernel virtual address.
Actually 0x00ffffffb0dd9400 is the user mode PC of 'PID: 113 Comm: sh', which
is saved in the task's stack.

[   21.201701] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #45
[   21.201979] Hardware name: riscv-virtio,qemu (DT)
[   21.202160] epc : 00ffffffa5537400 ra : ffffffff80088640 sp : ff20000010333b90
[   21.202435]  gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be7c
[   21.202707]  t1 : 0720072007200720 t2 : 30203a7375746174 s0 : ff20000010333cf0
[   21.202973]  s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001
[   21.203243]  a2 : 0000000000000010 a3 : 0000000000000000 a4 : 28c8f0aeffea4e00
[   21.203519]  a5 : 28c8f0aeffea4e00 a6 : 0000000000000009 a7 : ffffffff8035c9b8
[   21.203794]  s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98
[   21.204062]  s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468
[   21.204331]  s8 : 00ffffffef451410 s9 : 0000000000000007 s10: 00aaaaaac0510700
[   21.204606]  s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00
[   21.204876]  t5 : ff60000001218000 t6 : ff200000103338b8
[   21.205079] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008

With the incorrect PC, the backtrace showed by crash tool as below, the first
stack frame is abnormal,

crash> bt
PID: 113      TASK: ff60000002269600  CPU: 0    COMMAND: "sh"
 #0 [ff2000001039bb90] __efistub_.Ldebug_info0 at 00ffffffa5537400 <-- Abnormal
 #1 [ff2000001039bcf0] panic at ffffffff806578ba
 #2 [ff2000001039bd50] sysrq_reset_seq_param_set at ffffffff8038c030
 #3 [ff2000001039bda0] __handle_sysrq at ffffffff8038c5f8
 #4 [ff2000001039be00] write_sysrq_trigger at ffffffff8038cad8
 #5 [ff2000001039be20] proc_reg_write at ffffffff801b7edc
 #6 [ff2000001039be40] vfs_write at ffffffff80152ba6
 #7 [ff2000001039be80] ksys_write at ffffffff80152ece
 #8 [ff2000001039bed0] sys_write at ffffffff80152f46

With the patch, we can get current kernel mode PC, the output as below,

[   17.607658] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #42
[   17.607937] Hardware name: riscv-virtio,qemu (DT)
[   17.608150] epc : ffffffff800078f8 ra : ffffffff8008862c sp : ff20000010333b90
[   17.608441]  gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be68
[   17.608741]  t1 : 0720072007200720 t2 : 666666666666663c s0 : ff20000010333cf0
[   17.609025]  s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001
[   17.609320]  a2 : 0000000000000010 a3 : 0000000000000000 a4 : 0000000000000000
[   17.609601]  a5 : ff60000001c78000 a6 : 000000000000003c a7 : ffffffff8035c9a4
[   17.609894]  s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98
[   17.610186]  s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468
[   17.610469]  s8 : 00ffffffca281410 s9 : 0000000000000007 s10: 00aaaaaab5bb6700
[   17.610755]  s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00
[   17.611041]  t5 : ff60000001218000 t6 : ff20000010333988
[   17.611255] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008

With the correct PC, the backtrace showed by crash tool as below,

crash> bt
PID: 113      TASK: ff6000000226c200  CPU: 0    COMMAND: "sh"
 #0 [ff20000010333b90] riscv_crash_save_regs at ffffffff800078f8 <--- Normal
 #1 [ff20000010333cf0] panic at ffffffff806578c6
 #2 [ff20000010333d50] sysrq_reset_seq_param_set at ffffffff8038c03c
 #3 [ff20000010333da0] __handle_sysrq at ffffffff8038c604
 #4 [ff20000010333e00] write_sysrq_trigger at ffffffff8038cae4
 #5 [ff20000010333e20] proc_reg_write at ffffffff801b7ee8
 #6 [ff20000010333e40] vfs_write at ffffffff80152bb2
 #7 [ff20000010333e80] ksys_write at ffffffff80152eda
 #8 [ff20000010333ed0] sys_write at ffffffff80152f52

Fixes: e53d281 ("RISC-V: Add kdump support")
Co-developed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220811074150.3020189-3-xianting.tian@linux.alibaba.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
pcmoore pushed a commit that referenced this issue Oct 17, 2022
…(other cases)

BUGs like this are still reproducible:

[   31.509616] list_add corruption. prev->next should be next (ffff8f8644242300), but was ffff8f86493fd300. (prev=ffff8f86493fd300).
[   31.521544] ------------[ cut here ]------------
[   31.526248] kernel BUG at lib/list_debug.c:30!
[   31.530781] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[   31.535831] CPU: 1 PID: 626 Comm: wpa_supplicant Not tainted 6.0.0+ #7
[   31.542450] Hardware name: Dell Inc. Inspiron 660s/0478VN       , BIOS A07 08/24/2012
[   31.550484] RIP: 0010:__list_add_valid.cold+0x3a/0x5b
[   31.555537] Code: f2 4c 89 c1 48 89 fe 48 c7 c7 28 20 69 89 e8 4c e3 fd ff 0f 0b 48 89 d1 4c 89 c6 4c 89 ca 48 c7 c7 d0 1f 69 89 e8 35 e3 fd ff <0f> 0b 4c 89 c1 48 c7 c7 78 1f 69 89 e8 24 e3 fd ff 0f 0b 48 c7 c7
[   31.574605] RSP: 0018:ffff9f6f00dc3748 EFLAGS: 00010286
[   31.579990] RAX: 0000000000000075 RBX: ffff8f8644242080 RCX: 0000000000000000
[   31.587155] RDX: 0000000000000201 RSI: ffffffff8967862d RDI: 00000000ffffffff
[   31.594482] RBP: ffff8f86493fd2e8 R08: 0000000000000000 R09: 00000000ffffdfff
[   31.601735] R10: ffff9f6f00dc3608 R11: ffffffff89f46128 R12: ffff8f86493fd300
[   31.608986] R13: ffff8f86493fd300 R14: ffff8f8644242300 R15: ffff8f8643dd3f2c
[   31.616151] FS:  00007f3bb9a707c0(0000) GS:ffff8f865a300000(0000) knlGS:0000000000000000
[   31.624447] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   31.630286] CR2: 00007fe3647d5600 CR3: 00000001125a6002 CR4: 00000000000606e0
[   31.637539] Call Trace:
[   31.639936]  <TASK>
[   31.642143]  iwl_mvm_mac_wake_tx_queue+0x71/0x90 [iwlmvm]
[   31.647569]  ieee80211_queue_skb+0x4b6/0x720 [mac80211]
...

So, it is necessary to extend the applied solution with commit 14a3aac
("iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue")
to all other cases where the station queues are invalidated and the related
lists are not emptied. Because, otherwise as before, if some new element is
added later to the list in iwl_mvm_mac_wake_tx_queue, it can match with the
old one and produce the same commented BUG.

That is, in order to avoid this problem completely, we must also remove the
related lists for the other cases when station queues are invalidated.

Fixes: cfbc6c4 ("iwlwifi: mvm: support mac80211 TXQs model")
Reported-by: Petr Stourac <pstourac@redhat.com>
Tested-by: Petr Stourac <pstourac@redhat.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221010081611.145027-1-jtornosm@redhat.com
pcmoore pushed a commit that referenced this issue Jan 3, 2023
We need to check if we have a OS prefix, otherwise we stumble on a
metric segv that I'm now seeing in Arnaldo's tree:

  $ gdb --args perf stat -M Backend true
  ...
  Performance counter stats for 'true':

          4,712,355      TOPDOWN.SLOTS                    #     17.3 % tma_core_bound

  Program received signal SIGSEGV, Segmentation fault.
  __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77
  77      ../sysdeps/x86_64/multiarch/strlen-evex.S: No such file or directory.
  (gdb) bt
  #0  __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77
  #1  0x00007ffff74749a5 in __GI__IO_fputs (str=0x0, fp=0x7ffff75f5680 <_IO_2_1_stderr_>)
  #2  0x0000555555779f28 in do_new_line_std (config=0x555555e077c0 <stat_config>, os=0x7fffffffbf10) at util/stat-display.c:356
  #3  0x000055555577a081 in print_metric_std (config=0x555555e077c0 <stat_config>, ctx=0x7fffffffbf10, color=0x0, fmt=0x5555558b77b5 "%8.1f", unit=0x7fffffffbb10 "%  tma_memory_bound", val=13.165355724442199) at util/stat-display.c:380
  #4  0x00005555557768b6 in generic_metric (config=0x555555e077c0 <stat_config>, metric_expr=0x55555593d5b7 "((CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + tma_retiring * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES))"..., metric_events=0x555555f334e0, metric_refs=0x555555ec81d0, name=0x555555f32e80 "TOPDOWN.SLOTS", metric_name=0x555555f26c80 "tma_memory_bound", metric_unit=0x55555593d5b1 "100%", runtime=0, map_idx=0, out=0x7fffffffbd90, st=0x555555e9e620 <rt_stat>) at util/stat-shadow.c:934
  #5  0x0000555555778cac in perf_stat__print_shadow_stats (config=0x555555e077c0 <stat_config>, evsel=0x555555f289d0, avg=4712355, map_idx=0, out=0x7fffffffbd90, metric_events=0x555555e078e8 <stat_config+296>, st=0x555555e9e620 <rt_stat>) at util/stat-shadow.c:1329
  #6  0x000055555577b6a0 in printout (config=0x555555e077c0 <stat_config>, os=0x7fffffffbf10, uval=4712355, run=325322, ena=325322, noise=4712355, map_idx=0) at util/stat-display.c:741
  #7  0x000055555577bc74 in print_counter_aggrdata (config=0x555555e077c0 <stat_config>, counter=0x555555f289d0, s=0, os=0x7fffffffbf10) at util/stat-display.c:838
  #8  0x000055555577c1d8 in print_counter (config=0x555555e077c0 <stat_config>, counter=0x555555f289d0, os=0x7fffffffbf10) at util/stat-display.c:957
  #9  0x000055555577dba0 in evlist__print_counters (evlist=0x555555ec3610, config=0x555555e077c0 <stat_config>, _target=0x555555e01c80 <target>, ts=0x0, argc=1, argv=0x7fffffffe450) at util/stat-display.c:1413
  #10 0x00005555555fc821 in print_counters (ts=0x0, argc=1, argv=0x7fffffffe450) at builtin-stat.c:1040
  #11 0x000055555560091a in cmd_stat (argc=1, argv=0x7fffffffe450) at builtin-stat.c:2665
  #12 0x00005555556b1eea in run_builtin (p=0x555555e11f70 <commands+336>, argc=4, argv=0x7fffffffe450) at perf.c:322
  #13 0x00005555556b2181 in handle_internal_command (argc=4, argv=0x7fffffffe450) at perf.c:376
  #14 0x00005555556b22d7 in run_argv (argcp=0x7fffffffe27c, argv=0x7fffffffe270) at perf.c:420
  #15 0x00005555556b26ef in main (argc=4, argv=0x7fffffffe450) at perf.c:550
  (gdb)

Fixes: f123b2d ("perf stat: Remove prefix argument in print_metric_headers()")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/CAP-5=fUOjSM5HajU9TCD6prY39LbX4OQbkEbtKPPGRBPBN=_VQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pcmoore pushed a commit that referenced this issue Mar 6, 2023
This patch implements per virtqueue dma device for mlx5_vdpa. This is
needed for virtio_vdpa to work for CVQ which is backed by vringh but
not DMA. We simply advertise the vDPA device itself as the DMA device
for CVQ then DMA API can simply use PA so the identical mapping for
CVQ can still be used. Otherwise the identical (1:1) mapping won't
work when platform IOMMU is enabled since the IOVA is allocated on
demand which is not necessarily the PA.

This fixes the following crash when mlx5 vDPA device is bound to
virtio-vdpa with platform IOMMU enabled but not in passthrough mode:

BUG: unable to handle page fault for address: ff2fb3063deb1002
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1393001067 P4D 1393002067 PUD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 55 PID: 8923 Comm: kworker/u112:3 Kdump: loaded Not tainted 6.1.0+ #7
Hardware name: Dell Inc. PowerEdge R750/0PJ80M, BIOS 1.5.4 12/17/2021
Workqueue: mlx5_vdpa_wq mlx5_cvq_kick_handler [mlx5_vdpa]
RIP: 0010:vringh_getdesc_iotlb+0x93/0x1d0 [vringh]
Code: 14 25 40 ef 01 00 83 82 c0 0a 00 00 01 48 2b 05 93 5a 1b ea 8b 4c 24 14 48 c1 f8 06 48 c1 e0 0c 48 03 05 90 5a 1b ea 48 01 c8 <0f> b7 00 83 aa c0 0a 00 00 01 65 ff 0d bc e4 41 3f 0f 84 05 01 00
RSP: 0018:ff46821ba664fdf8 EFLAGS: 00010282
RAX: ff2fb3063deb1002 RBX: 0000000000000a20 RCX: 0000000000000002
RDX: ff2fb318d2f94380 RSI: 0000000000000002 RDI: 0000000000000001
RBP: ff2fb3065e832410 R08: ff46821ba664fe00 R09: 0000000000000001
R10: 0000000000000000 R11: 000000000000000d R12: ff2fb3065e832488
R13: ff2fb3065e8324a8 R14: ff2fb3065e8324c8 R15: ff2fb3065e8324a8
FS:  0000000000000000(0000) GS:ff2fb3257fac0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ff2fb3063deb1002 CR3: 0000001392010006 CR4: 0000000000771ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
  mlx5_cvq_kick_handler+0x89/0x2b0 [mlx5_vdpa]
  process_one_work+0x1e2/0x3b0
  ? rescuer_thread+0x390/0x390
  worker_thread+0x50/0x3a0
  ? rescuer_thread+0x390/0x390
  kthread+0xd6/0x100
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>

Reviewed-by: Eli Cohen <elic@nvidia.com>
Tested-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230119061525.75068-6-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pcmoore pushed a commit that referenced this issue Mar 6, 2023
GCC warns about the pattern sizeof(void*)/sizeof(void), as it looks like
the abuse of a pattern to calculate the array size. This pattern appears
in the unevaluated part of the ternary operator in _INTC_ARRAY if the
parameter is NULL.

The replacement uses an alternate approach to return 0 in case of NULL
which does not generate the pattern sizeof(void*)/sizeof(void), but still
emits the warning if _INTC_ARRAY is called with a nonarray parameter.

This patch is required for successful compilation with -Werror enabled.

The idea to use _Generic for type distinction is taken from Comment #7
in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108483 by Jakub Jelinek

Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/619fa552-c988-35e5-b1d7-fe256c46a272@mkarcher.dialup.fu-berlin.de
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
pcmoore pushed a commit that referenced this issue Mar 6, 2023
code path:

ocfs2_ioctl_move_extents
 ocfs2_move_extents
  ocfs2_defrag_extent
   __ocfs2_move_extent
    + ocfs2_journal_access_di
    + ocfs2_split_extent  //sub-paths call jbd2_journal_restart
    + ocfs2_journal_dirty //crash by jbs2 ASSERT

crash stacks:

PID: 11297  TASK: ffff974a676dcd00  CPU: 67  COMMAND: "defragfs.ocfs2"
 #0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01
 #1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d
 #2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d
 #3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f
 #4 [ffffb25d8dad3a58] do_trap at ffffffff83833205
 #5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6
 #6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18
    [exception RIP: jbd2_journal_dirty_metadata+0x2ba]
    RIP: ffffffffc09ca54a  RSP: ffffb25d8dad3b70  RFLAGS: 00010207
    RAX: 0000000000000000  RBX: ffff9706eedc5248  RCX: 0000000000000000
    RDX: 0000000000000001  RSI: ffff97337029ea28  RDI: ffff9706eedc5250
    RBP: ffff9703c3520200   R8: 000000000f46b0b2   R9: 0000000000000000
    R10: 0000000000000001  R11: 00000001000000fe  R12: ffff97337029ea28
    R13: 0000000000000000  R14: ffff9703de59bf60  R15: ffff9706eedc5250
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2]
 #8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2]
 #9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2]

Analysis

This bug has the same root cause of 'commit 7f27ec9 ("ocfs2: call
ocfs2_journal_access_di() before ocfs2_journal_dirty() in
ocfs2_write_end_nolock()")'.  For this bug, jbd2_journal_restart() is
called by ocfs2_split_extent() during defragmenting.

How to fix

For ocfs2_split_extent() can handle journal operations totally by itself. 
Caller doesn't need to call journal access/dirty pair, and caller only
needs to call journal start/stop pair.  The fix method is to remove
journal access/dirty from __ocfs2_move_extent().

The discussion for this patch:
https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html

Link: https://lkml.kernel.org/r/20230217003717.32469-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pcmoore pushed a commit that referenced this issue May 8, 2023
If something was written to the buffer just before destruction,
it may be possible (maybe not in a real system, but it did
happen in ARCH=um with time-travel) to destroy the ringbuffer
before the IRQ work ran, leading this KASAN report (or a crash
without KASAN):

    BUG: KASAN: slab-use-after-free in irq_work_run_list+0x11a/0x13a
    Read of size 8 at addr 000000006d640a48 by task swapper/0

    CPU: 0 PID: 0 Comm: swapper Tainted: G        W  O       6.3.0-rc1 #7
    Stack:
     60c4f20f 0c203d48 41b58ab3 60f224fc
     600477fa 60f35687 60c4f20f 601273dd
     00000008 6101eb00 6101eab0 615be548
    Call Trace:
     [<60047a58>] show_stack+0x25e/0x282
     [<60c609e0>] dump_stack_lvl+0x96/0xfd
     [<60c50d4c>] print_report+0x1a7/0x5a8
     [<603078d3>] kasan_report+0xc1/0xe9
     [<60308950>] __asan_report_load8_noabort+0x1b/0x1d
     [<60232844>] irq_work_run_list+0x11a/0x13a
     [<602328b4>] irq_work_tick+0x24/0x34
     [<6017f9dc>] update_process_times+0x162/0x196
     [<6019f335>] tick_sched_handle+0x1a4/0x1c3
     [<6019fd9e>] tick_sched_timer+0x79/0x10c
     [<601812b9>] __hrtimer_run_queues.constprop.0+0x425/0x695
     [<60182913>] hrtimer_interrupt+0x16c/0x2c4
     [<600486a3>] um_timer+0x164/0x183
     [...]

    Allocated by task 411:
     save_stack_trace+0x99/0xb5
     stack_trace_save+0x81/0x9b
     kasan_save_stack+0x2d/0x54
     kasan_set_track+0x34/0x3e
     kasan_save_alloc_info+0x25/0x28
     ____kasan_kmalloc+0x8b/0x97
     __kasan_kmalloc+0x10/0x12
     __kmalloc+0xb2/0xe8
     load_elf_phdrs+0xee/0x182
     [...]

    The buggy address belongs to the object at 000000006d640800
     which belongs to the cache kmalloc-1k of size 1024
    The buggy address is located 584 bytes inside of
     freed 1024-byte region [000000006d640800, 000000006d640c00)

Add the appropriate irq_work_sync() so the work finishes before
the buffers are destroyed.

Prior to the commit in the Fixes tag below, there was only a
single global IRQ work, so this issue didn't exist.

Link: https://lore.kernel.org/linux-trace-kernel/20230427175920.a76159263122.I8295e405c44362a86c995e9c2c37e3e03810aa56@changeid

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 1569345 ("tracing/ring-buffer: Move poll wake ups into ring buffer code")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
pcmoore pushed a commit that referenced this issue May 8, 2023
Sai Krishna says:

====================
octeontx2: Miscellaneous fixes

This patchset includes following fixes.

Patch #1 Fix for the race condition while updating APR table

Patch #2 Fix end bit position in NPC scan config

Patch #3 Fix depth of CAM, MEM table entries

Patch #4 Fix in increase the size of DMAC filter flows

Patch #5 Fix driver crash resulting from invalid interface type
information retrieved from firmware

Patch #6 Fix incorrect mask used while installing filters involving
fragmented packets

Patch #7 Fixes for NPC field hash extract w.r.t IPV6 hash reduction,
         IPV6 filed hash configuration.

Patch #8 Fix for NPC hardware parser configuration destination
         address hash, IPV6 endianness issues.

Patch #9 Fix for skipping mbox initialization for PFs disabled by firmware.

Patch #10 Fix disabling packet I/O in case of mailbox timeout.

Patch #11 Fix detaching LF resources in case of VF probe fail.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
stephensmalley pushed a commit to stephensmalley/selinux-kernel that referenced this issue May 2, 2024
The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the
corresponding ttm_resource_manager is not allocated.
This leads to a crash when trying to read from this file.

Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file
only when the corresponding ttm_resource_manager is allocated.

crash> bt
PID: 3133409  TASK: ffff8fe4834a5000  CPU: 3    COMMAND: "grep"
 #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3
 SELinuxProject#1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a
 SELinuxProject#2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1
 SELinuxProject#3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1
 SELinuxProject#4 [ffffb954506b3c70] no_context at ffffffffb2a7e913
 SELinuxProject#5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c
 SELinuxProject#6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887
 SELinuxProject#7 [ffffb954506b3d40] page_fault at ffffffffb360116e
    [exception RIP: ttm_resource_manager_debug+0x11]
    RIP: ffffffffc04afd11  RSP: ffffb954506b3df0  RFLAGS: 00010246
    RAX: ffff8fe41a6d1200  RBX: 0000000000000000  RCX: 0000000000000940
    RDX: 0000000000000000  RSI: ffffffffc04b4338  RDI: 0000000000000000
    RBP: ffffb954506b3e08   R8: ffff8fee3ffad000   R9: 0000000000000000
    R10: ffff8fe41a76a000  R11: 0000000000000001  R12: 00000000ffffffff
    R13: 0000000000000001  R14: ffff8fe5bb6f3900  R15: ffff8fe41a6d1200
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 SELinuxProject#8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm]
 SELinuxProject#9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3
    RIP: 00007f4c4eda8985  RSP: 00007ffdbba9e9f8  RFLAGS: 00000246
    RAX: ffffffffffffffda  RBX: 000000000037e000  RCX: 00007f4c4eda8985
    RDX: 000000000037e000  RSI: 00007f4c41573000  RDI: 0000000000000003
    RBP: 000000000037e000   R8: 0000000000000000   R9: 000000000037fe30
    R10: 0000000000000000  R11: 0000000000000246  R12: 00007f4c41573000
    R13: 0000000000000003  R14: 00007f4c41572010  R15: 0000000000000003
    ORIG_RAX: 0000000000000000  CS: 0033  SS: 002b

Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: af4a25b ("drm/vmwgfx: Add debugfs entries for various ttm resource managers")
Cc: <stable@vger.kernel.org>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240312093551.196609-1-jfalempe@redhat.com
stephensmalley pushed a commit to stephensmalley/selinux-kernel that referenced this issue May 2, 2024
At current x1e80100 interface table, interface SELinuxProject#3 is wrongly
connected to DP controller #0 and interface SELinuxProject#4 wrongly connected
to DP controller SELinuxProject#2. Fix this problem by connect Interface SELinuxProject#3 to
DP controller #0 and interface SELinuxProject#4 connect to DP controller SELinuxProject#1.
Also add interface SELinuxProject#6, SELinuxProject#7 and SELinuxProject#8 connections to DP controller to
complete x1e80100 interface table.

Changs in V3:
-- add v2 changes log

Changs in V2:
-- add x1e80100 to subject
-- add Fixes

Fixes: e3b1f36 ("drm/msm/dpu: Add X1E80100 support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/585549/
Link: https://lore.kernel.org/r/1711741586-9037-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
stephensmalley pushed a commit to stephensmalley/selinux-kernel that referenced this issue May 2, 2024
…git/netfilter/nf

netfilter pull request 24-04-11

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

Patches SELinuxProject#1 and SELinuxProject#2 add missing rcu read side lock when iterating over
expression and object type list which could race with module removal.

Patch SELinuxProject#3 prevents promisc packet from visiting the bridge/input hook
	 to amend a recent fix to address conntrack confirmation race
	 in br_netfilter and nf_conntrack_bridge.

Patch SELinuxProject#4 adds and uses iterate decorator type to fetch the current
	 pipapo set backend datastructure view when netlink dumps the
	 set elements.

Patch SELinuxProject#5 fixes removal of duplicate elements in the pipapo set backend.

Patch SELinuxProject#6 flowtable validates pppoe header before accessing it.

Patch SELinuxProject#7 fixes flowtable datapath for pppoe packets, otherwise lookup
         fails and pppoe packets follow classic path.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
stephensmalley pushed a commit to stephensmalley/selinux-kernel that referenced this issue May 2, 2024
vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.

net_ratelimit mechanism can be used to limit the dumping rate.

PID: 33036    TASK: ffff949da6f20000  CPU: 23   COMMAND: "vhost-32980"
 #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
 SELinuxProject#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
 SELinuxProject#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
 SELinuxProject#3 [fffffe00003fced0] do_nmi at ffffffff8922660d
 SELinuxProject#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
    [exception RIP: io_serial_in+20]
    RIP: ffffffff89792594  RSP: ffffa655314979e8  RFLAGS: 00000002
    RAX: ffffffff89792500  RBX: ffffffff8af428a0  RCX: 0000000000000000
    RDX: 00000000000003fd  RSI: 0000000000000005  RDI: ffffffff8af428a0
    RBP: 0000000000002710   R8: 0000000000000004   R9: 000000000000000f
    R10: 0000000000000000  R11: ffffffff8acbf64f  R12: 0000000000000020
    R13: ffffffff8acbf698  R14: 0000000000000058  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 SELinuxProject#5 [ffffa655314979e8] io_serial_in at ffffffff89792594
 SELinuxProject#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
 SELinuxProject#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
 SELinuxProject#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
 SELinuxProject#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
 SELinuxProject#10 [ffffa65531497ac8] console_unlock at ffffffff89316124
 SELinuxProject#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
 SELinuxProject#12 [ffffa65531497b68] printk at ffffffff89318306
 SELinuxProject#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
 SELinuxProject#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
 SELinuxProject#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
 SELinuxProject#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
 SELinuxProject#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
 SELinuxProject#18 [ffffa65531497f10] kthread at ffffffff892d2e72
 SELinuxProject#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f

Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <lei.chen@smartx.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pcmoore pushed a commit that referenced this issue May 28, 2024
…rnel/git/netfilter/nf-next

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

Patch #1 skips transaction if object type provides no .update interface.

Patch #2 skips NETDEV_CHANGENAME which is unused.

Patch #3 enables conntrack to handle Multicast Router Advertisements and
	 Multicast Router Solicitations from the Multicast Router Discovery
	 protocol (RFC4286) as untracked opposed to invalid packets.
	 From Linus Luessing.

Patch #4 updates DCCP conntracker to mark invalid as invalid, instead of
	 dropping them, from Jason Xing.

Patch #5 uses NF_DROP instead of -NF_DROP since NF_DROP is 0,
	 also from Jason.

Patch #6 removes reference in netfilter's sysctl documentation on pickup
	 entries which were already removed by Florian Westphal.

Patch #7 removes check for IPS_OFFLOAD flag to disable early drop which
	 allows to evict entries from the conntrack table,
	 also from Florian.

Patches #8 to #16 updates nf_tables pipapo set backend to allocate
	 the datastructure copy on-demand from preparation phase,
	 to better deal with OOM situations where .commit step is too late
	 to fail. Series from Florian Westphal.

Patch #17 adds a selftest with packetdrill to cover conntrack TCP state
	 transitions, also from Florian.

Patch #18 use GFP_KERNEL to clone elements from control plane to avoid
	 quick atomic reserves exhaustion with large sets, reporter refers
	 to million entries magnitude.

* tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: nf_tables: allow clone callbacks to sleep
  selftests: netfilter: add packetdrill based conntrack tests
  netfilter: nft_set_pipapo: remove dirty flag
  netfilter: nft_set_pipapo: move cloning of match info to insert/removal path
  netfilter: nft_set_pipapo: prepare pipapo_get helper for on-demand clone
  netfilter: nft_set_pipapo: merge deactivate helper into caller
  netfilter: nft_set_pipapo: prepare walk function for on-demand clone
  netfilter: nft_set_pipapo: prepare destroy function for on-demand clone
  netfilter: nft_set_pipapo: make pipapo_clone helper return NULL
  netfilter: nft_set_pipapo: move prove_locking helper around
  netfilter: conntrack: remove flowtable early-drop test
  netfilter: conntrack: documentation: remove reference to non-existent sysctl
  netfilter: use NF_DROP instead of -NF_DROP
  netfilter: conntrack: dccp: try not to drop skb in conntrack
  netfilter: conntrack: fix ct-state for ICMPv6 Multicast Router Discovery
  netfilter: nf_tables: remove NETDEV_CHANGENAME from netdev chain event handler
  netfilter: nf_tables: skip transaction if update object is not implemented
====================

Link: https://lore.kernel.org/r/20240512161436.168973-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
Development

No branches or pull requests

2 participants