GL358 2G4 WiFi board
Function
Variants
Parts
Programming
External interfaces
Service interfaces
Board view
Schematics
The board contains 2.4GHz Radio Frequency components for communications between the remote controller and a mobile device. It is separated from the main board to reduce interference and allow separate shielding for the high frequency components.
There are multiple versions of the board.
| Marking | Overview |
|---|---|
| P00994.04 |
| Marking | Amt. | Pkg. | Function | Specification |
|---|---|---|---|---|
| Micron 5KM12 D9NLC GZPC | 1 | 60-ball FBGA | MT46V16M16CY-5B:M Automotive DDR SDRAM, 4 Meg x 16 x 4 banks | description |
| Atheros AR9312 8B1A | 1 | |||
| Winbond 25Q64FVSIG 1452 | 1 | 64MBit Serial NOR Flash Memory | description | |
| SiGe 2565T 510GR | 2 | |||
| SKY2 5405 | 2 | |||
| SKY 3348 | 2 |
| Chips | Firmware | Description |
|---|---|---|
| AR9312, 25Q64FV, MT46V16M16 | Programming for the WiFi video transmission relay |
Connectors on the board are:
| Marking | Overview |
|---|---|
| TODO |
The following service pads exist on this board:
| Marking | Overview |
|---|---|
| TX1 | UART transmit |
| RX1 | UART receive |
| GND | |
| GPIO16 | |
| GND | |
| 3V6 | |
| GND | |
| 3V6 | |
| TX0 | UART transmit; Atheros system console |
| RX0 | UART receive; Atheros system console |
| GND | |
| 3V3 | |
| GPIO_4 | |
| TXD3 | |
| TXD1 | |
| DEV | |
| HOST | |
| D+ | USB D+ |
| D- | USB D- |
Top of a P00994.04 board:
Bottom of the P00994.04 board:
Top of a second P00994.04 board:
Bottom of the P00994.04 board:
No schematics available.