WM610 X5 Camera Hi Res Encoder Gimbal Control board
Function
Variants
Parts
Programming
External interfaces
Service interfaces
Board view
Schematics
The board conatains high bandwidth video encoder used to compress video stream and save it on SD-card. Gimbal main controller is also on it.
Several versions of the module are known.
| Marking | Overview |
|---|---|
| P01243.02 |
| Marking | Amt. | Pkg. | Function | Specification |
|---|---|---|---|---|
| Elpida B8132B3PB | 1 | 168-ball 12×12 FBGA | Embedded LPDDR2 SDRAM for Ambarella | description |
| Ambarella A9-A1-RH A1520 N8UWX-C ANM1N1 A9S75 | 1 | BGA | Ultra HD 4K Camera SoC | brief |
| MXIC X154009 MX30LF2G18AC-XKI 8C149000 | 1 | 63-ball 11x9 VFBGA | 3V SLC 2GBit NAND Flash memory; stores programming for A9S75 | description |
| 5HE12 NQ283 | 1 | 63-ball 11x9 VFBGA | Micron MT29F2G08ABAEAH4 NAND Flash; stores programming for A9S75; is MX30LF2G replacement on some boards | description |
| ARM1 STM32 F427IIH6 HPADF VQ KOR HP 521 | 1 | 201-ball 10x10 UFBGA176+25 | ARM-based 32-bit MCU; for gimbal master control | description |
| Chips | Firmware | Description |
|---|---|---|
| A9S75, EDB8132B, MX30LF2G/MT29F2G | m0100, m0101 | Takes care of video encoding and controls firmware update process. Controls SD card slot. Consists of loader (01) and application (00). |
| STM32F427 | m0400 | Gimbal master control; provides gimbal arm micro-controllers with proper signals to ensure stabilization and responsiveness to user commands. |
| Marking | Overview |
|---|---|
| TODO |
The following service pads exist on this board:
| Marking | Overview |
|---|---|
| TODO |
Top of a P01243.02 board:
Bottom of the P01243.02 board:
No schematics available.