Skip to content

WM610 X5 Camera Live View Encoder board

mefistotelis edited this page Oct 10, 2019 · 2 revisions

Table of Contents

Function
Variants
Parts
Programming
External interfaces
Service interfaces
Board view
Schematics

Function

The board conatains supplementary video encoder, used to prepare compressed video stream which is later sent to Remote Controller using Lightbridge technolongy.

Variants

Several versions of the module are known.

Marking Overview
WM610_M43_DM368_v1

Parts

Marking Amt. Pkg. Function Specification
DM368ZCED 55A9DGW 570 GI 1 338-ball 13x13 NFBGA / ZCE TMS320DM365 Digital Media System-on-Chip; only on 4K boards description datasheet
ISSI 1511 IS43DR16640B-250BLI 1 84-ball 8x12.5 TW-BGA DDR2 SDRAM 64MB x16; used by DM368 datasheet
DAJ TI 51X DEX3 1 20-pin 3x3 WQFN-5555 TI TPS650061RUKR 2.25MHz Step-Down Converter with Dual LDOs & SVS Power Management description
MXIC MX30LF1G 1 63-ball 11x9 VFBGA 3V SLC 1GBit NAND Flash memory; programming for DM368 description
5ME12 NW361 1 63-ball 11x9 VFBGA Micron MT29F1G08ABAEAH4 NAND Flash, 1GBit; programming for DM368; is MX30LF1G replacement on some boards description

Programming

Chips Firmware Description
DM365, IS43DR, MX30LF1G/MT29F1G m0800 Prepares video for FPV transmission through Lightbridge.

External interfaces

Marking Overview
TODO

Service interfaces

The following service pads exist on this board:

Marking Overview
TODO

Board view

Top of a WM610_M43_DM368_v1 board:

WM610 X5 Camera Live View Encoder board v1 A top

Bottom of the WM610_M43_DM368_v1 board:

WM610 X5 Camera Live View Encoder board v1 A bottom

Schematics

No schematics available.

Clone this wiki locally