-
Notifications
You must be signed in to change notification settings - Fork 421
WM220 GPS Module board
Function
Variants
Parts
Programming
External interfaces
Service interfaces
Board view
Schematics
The GPS module provides the Flight Controller with current GPS coordinates.
There are multiple versions of the board:
Marking | Overview |
---|---|
P01559.08 |
Marking | Amt. | Pkg. | Function | Specification |
---|---|---|---|---|
TODO | 1 |
The u-blox modules are programmable, but there is no capability of updating GPS firmware via WM220 firmware package.
Chips | Firmware | Description |
---|---|---|
todo | n/a |
Connector on the board is:
Marking | Overview |
---|---|
Tied 6 Wires | Supplies power and allows I/O with the board |
Here is the connector pinout:
Pin | Function |
---|---|
1 | SCA |
2 | SCL |
3 | TX |
4 | RX |
5 | GND |
6 | +5V |
The following service pads exist on this board:
Marking | Overview |
---|---|
TODO |
Top of a P01559.08 board, antenna visible:
Bottom of the P01559.08 board, SMD components visible:
No schematics available.
This page is created by drone enthusiasts for drone enthusiasts.
If you see a mistake, or you know more about specific subject, or you see an area for improvement for the wiki - create an issue in this project and attach your patch (or describe the change you propose).