Kubo: Ackermann Steering

Overview

    Kubo drives via Ackermann Steering, controlled via a linear actuator on the velocity pedal and a rotational actuator on the steering wheel. The basic concept behind Ackermann steering is that the inner wheel in a turn turns a greater angle than the outer wheel to prevent excess wear and increase steering effectiveness. For more on Ackermann steering, read the following RcTek article (link).

    Ackermann steered vehicles function differently from differential-driver vehicles in that they cannot instantly reach a given heading, and must instead approach a heading by turning the wheels, driving forward for a certain period of time, then straightening the wheels. The OAK (documentation) hind-brain deals with Ackermann steering by taking in a ROS Ackermann steering message (reference)

Setup for Ackermann Steering Class

Setup Ackermann Steering Messages

• Installed ROS ackermann steering messages via sudo apt-get install ros-indigo-ackermann-msgs
• Re-setup rosserial on arduino IDE (tutorial)
• Go into /opt/"your arduino ide"/libraries/ros_lib/ArduinoHardware.h and find the following line of code:
• Update the line to look like this:

Connor Novak last edited this page 17/08/02