MavToPT project support
Version 1.8.0 and above natively support Eric Stockenstrom's MavlinkToPassthru converter firmware Plus version.
By using Eric's Plus version the script can display
- waypoint number, bearing and distance
- airspeed info
- throttle %
To enable this feature please select it from the script config menu by choosing "m2f" as left panel option.
If you wish to use the RSSI source provided by MavlinkToPassthru, ensure that you have the correct sensor selected in the "RSSI Source" option in the OpenTX Telemetry tab.
- Passthrough protocol specs
- Screen Layout
- Display GPS coordinates on Taranis radios
- Feature list
- Sensor discovery
- How to display additional sensors on screen
- Flight modes
- Voltage sources
- Battery configurations
- Airspeed vs Groundspeed
- Alerts
- Telemetry reset
- Telemetry logging to SD
- MavToPT support
- Supported Radios
- Installation on BW LCD radios running OpenTX/EdgeTX
- Installation on Color LCD radios running OpenTX/EdgeTX
- Installation on Color LCD radios running Ethos
- CRSF and ExpressLRS support
- Ardupilot Hardware requirements
- Ardupilot Configuration
- Google Maps configuration
- GMAPCatcher Maps configuration
- QGIS Maps configuration
- Maps Zoom control
- Plotting telemetry values on OpenTX/EdgeTX
- Configuration menu
- Sound files customization
