Skip to content

Lamps 1MLED

FLMRobert edited this page Jan 29, 2018 · 6 revisions

1MLED (Standard Light Strip) Overview

Lamp 1MLED

1MLED light strip

The 1MLED light strip was designed as replacement for three 60 W light bulbs. Because of the high efficiency of LEDs the light of the 40FLATLED lamp became even brighter as planned - it is almost as bright as two 60 W lamps.

1MLED is a general purpose light strip and may be used in the kitchen or on other workplace where you need very bright light. (Hint: make sure to choose the appropriate LED light color temperature. For workplaces you typically choose a light color of 5000 K)

The effort for building this lamp is pretty low, since it mainly consist of a an aluminium profile. Creating the required 7 LED modules is also straightforward and should be doable for all tinkerers who attended a LED workshop.

The 1MLED light strip can be soldered and assembled by an average tinkerer in a couple of hours and without deeper knowledge.

Module

1MLED is based on seven Module 2 circuit boards.

Power Source

1MLED is powered by a Constant Current Source with a current of 700 mA.

Lamp Design Status

The 1MLED lamp is currently being designed.

Please consult the 1MLED Logbook to check out the current status of the lamp.

Data Sheet

Data Sheet 1MLED