Skip to content

Lamps 40FLATLED

FLMRobert edited this page Jan 29, 2018 · 7 revisions

40FLATLED (Standard Ceiling Light) Overview

Lamp 40FLATLED

40FLATLED LED Panel Prototype

The 40FLATLED ceiling light was designed as replacement for a 60 W light bulb. Because of the high efficiency of LEDs the light of the 40FLATLED lamp became even brighter as planned - it is almost as bright as two 60 W lamps.

40FLATLED is a general purpose ceiling light and may be used in the living room, bedroom, kitchen, corridor, ... wherever you want. (Hint: make sure to choose the appropriate LED light color temperature for different use cases: choose 2700K for living room or bedroom and 5000 K for kitchen, corridor or workplaces)

The effort for building this lamp is pretty low, since it is made of standard parts from the furniture store. Creating the required 5 LED modules is also straightforward and should be doable for all tinkerers who attended a LED workshop.

This 40FLATLED ceiling light can be soldered and assembled by an average tinkerer in a couple of hours and without deeper knowledge.

Module

40FLATLED is based on five Module 2 circuit boards.

Power Source

40FLATLED is powered by a Constant Current Source with a current of 350 mA.

Lamp Design Status

The 40FLATLED lamp is currently being designed.

Please consult the 40FLATLED Logbook to check out the current status of the lamp.

Data Sheet

Data Sheet 40FLATLED