SN4800 SONiC platform API change #82
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Conflicts: platform/mellanox/mlnx-platform-api/sonic_platform/chassis.py platform/mellanox/mlnx-platform-api/sonic_platform/psu.py
…nic-net#7820) Why I did it * For SAI - Upgrade to Version 1.19.0 - Add support for VxLAN encap TTL uniform model on SPC2/3 - Add ACL entry actions set VRF, set do no learn, add VLAN ID, add VLAN priority - Add ACL field has VLAN tag - Bulk counters (improve port statistics performance) - Create async dump extra as part of debug generate dump - Create irisc dump on severe health event - Support 0 port systems (modify get switch mac to work accordingly) - Set interface vlan up state for ping tool in SONiC - Support attributes SAI_PORT_ATTR_QOS_SCHEDULER_PROFILE_ID, SAI_PORT_ATTR_QOS_INGRESS_BUFFER_PROFILE_LIST, SAI_PORT_ATTR_QOS_EGRESS_BUFFER_PROFILE_LIST, SAI_PORT_ATTR_POLICER_ID as part of port create Git stats * For SDK\FW - Upgrade to Version SDK 4.4.3106, FW 2008_3110 Added Features: - Increased ACL table - Enhanced PSAMPLE support - Added support for Finisar SR4 module in SN3700 systems - Added support for Python 3.0 in examples. Fix bugs: - On LR4 transceivers 00YD278, the firmware incorrectly identified the transceiver - Reduce memory consumption for virtual LAG - Fixed PSAMPLE listeners cleanup on SDK drivers unloading. - On Spectrum-2 and Spectrum-3 systems, slow reaction time to Rx pause packets may lead to buffer overflow on servers. - BER may be experienced when using 5m DAC cables between SN4700 and SN2700 in 100GbE speed. - On very rare occasion, when connecting DR4 PAM4 transceiver to 100GbE DR1 NRZ, low BER may be experienced. - Unexpected packet drops on the port ingress buffer may be experienced when working in 400GbE mode. Note: When performing ISSU from an older version, this fix won't be applied. For fix to apply, a non-ISSU reset is required. - Fix SN3800 specific warm boot scenario: Disable interface, Warm Boot, Enable Interface --> link will remain down. Signed-off-by: Dror Prital <drorp@nvidia.com>
This change has SONiC Yang model support for NAT - Created SONiC Yang model for NAT - Tables: STATIC_NAPT, STATIC_NAT, NAT_GLOBAL, NAT_POOL, NAT_BINDINGS. How I did it Defined Yang models for NAT based on Guideline doc: https://github.com/Azure/SONiC/blob/master/doc/mgmt/SONiC_YANG_Model_Guidelines.md and https://github.com/Azure/sonic-utilities/blob/master/doc/Command-Reference.md How to verify it Added test cases to verify it.
…ta (sonic-net#7712) Why I did it This PR adds changes in sonic-config-engine to consume configuration data in SONiC Yang schema and generate config_db entries How I did it Add a new file sonic_yang_cfg_generator . This file has the functions to parse yang data json and convert them in config_db json format. Validate the converted config_db entries to make sure all the dependencies and constraints are met. Add a new option -Y to the sonic-cfggen command for this purpose Add unit tests This capability is support only in sonic-config-engine Python3 package only
To fix determine-reboot-cause service which was failing due to non-implemented thrown from get_reboot_case, if the reboot was done with `sudo reboot` (cold reboot) Signed-off-by: Volodymyr Boyko <volodymyrx.boiko@intel.com>
Added support BRCM SAI 5.0.0.1. Major changes here: CS00012019568 Link Training (all 100G ASICs - TH families and TD3) CS00012184310 [attribute_capability| for port SAI_PORT_ATTR_TPID returns CREATE_IMP=false|SET_IMP=true|GET_IMP=true CS00012182145 [IPinIP][Tunnel Delete] If IPinIP tunnel delete is performed observed following SYNCd error: ERR syncd#syncd: [none] SAI_API_TUNNEL:brcm_sai_tnl_mp_remove_tunnel_term_table_entry:4026 _brcm_sai_mptnl_sip_tnl_lookup failed with error -7. CS00012182148 Rate Limit Parity error message to syncd/sonic. CS00012178692 ACL drops counted as interface drops CS00012183901 [WARMBOOT] WARMReboot with active traffic causes port flap reported during warm reboot CS00012023263 TD3/TH2 : Support 4 lossless queues(2 SW PFCWD and 2 HW PFCWD) CS00012019578 Pre FEC bit-error rate (BER) - DNX and XGS (TD and TH 50/100G)
Fixed the RADIUS client debian packages build for arm64, armhf PLATFORM_ARCH
To have access to MFT tools in the Syncd container on Mellanox switches due to SAI dump API implementation enhancements
Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>
[Submodule update] sonic-telemetry [multi-asic] Added Support for multi-asic for telemetry/gnmi server (#77)
…hon2 and python3 (sonic-net#7848) - Why I did it Adjust the Makefile for SDK/python-SDK-API to support both python2 and python3 - How to verify it Build the image and check whether python2 and python3 are both supported by SDK API. Signed-off-by: Stephen Sun <stephens@nvidia.com>
- Why I did it Enhance the Python3 support for platform API. Originally, some platform APIs call SDK API which didn't support Python 3. Now the Python 3 APIs have been supported in SDK 4.4.3XXX, Python3 is completely supported by platform API - How I did it Start all platform daemons from python3 1. Remove #/usr/bin/env python at the beginning of each platform API file as the platform API won't be started as daemons but be imported from other daemons. 2. Adjust SDK API calls accordingly - How to verify it Manually test and run regression platform test Signed-off-by: Stephen Sun <stephens@nvidia.com>
Signed-off-by: Mykola Gerasymenko <mykolax.gerasymenko@intel.com> Why I did it Dynamic Port Breakout falls cause of PG_DROP yang model missing How I did it Add PG_DROP yang model and add check this field in unit test for yang model How to verify it Firstly try to do DPB (2x50G) for Ethernet0 port: sudo config interface breakout Ethernet0 2x50G -f After that try to do DPB (1x100G[40G]) for Ethernet0 port: sudo config interface breakout Ethernet0 1x100G[40G] -f Both commands should work correctly.
Explicitly check for null VLAN MAC in minigraph parser before setting it - if it is null, do not set the VLAN MAC attribute
There is no rule to build swi target. The correct target is *.bin.
sonic-net#7840) #### Why I did it The PR checkers do not re-run the sonic-config-engine test cases, caused by some of the config files changes not detected. https://sonic-jenkins.westus2.cloudapp.azure.com/job/mellanox/job/buildimage-mlnx-all/660/console … 07:13:24 ====================================================================== 07:13:24 ERROR: test_bgpd_quagga (tests.test_j2files.TestJ2Files) 07:13:24 ---------------------------------------------------------------------- … 07:13:24 ====================================================================== 07:13:24 ERROR: test_zebra_quagga (tests.test_j2files.TestJ2Files) 07:13:24 ---------------------------------------------------------------------- … 07:13:24 error: Test failed: <unittest.runner.TextTestResult run=161 errors=2 failures=0> 07:13:24 [ FAIL LOG END ] [ target/python-wheels/sonic_config_engine-1.0-py2-none-any.whl ] 07:13:24 make: *** [slave.mk:603: target/python-wheels/sonic_config_engine-1.0-py2-none-any.whl] Error 1 07:13:24 Makefile.work:292: recipe for target 'target/sonic-mellanox.bin' failed 07:13:24 make[1]: *** [target/sonic-mellanox.bin] Error 2 07:13:24 make[1]: Leaving directory '/data2/johnar/workspace/mellanox/buildimage-mlnx-all' 07:13:24 Makefile:7: recipe for target 'target/sonic-mellanox.bin' failed 07:13:24 make: *** [target/sonic-mellanox.bin] Error 2 See PR: sonic-net#7476 #### How I did it Add the depended files. See src/sonic-config-engine/tests/test_j2files.py
What I did: Updated 7260 MMU Profile based on latest MSFT Tier 1 Tomahawk2_MMU_Setting_48x100G_40m_16x100G_300m_v1.0 and TH2_PGHdrm_MSFT. How I verify: Made sure image is up/traffic is flowing/mmu dump looked fine. SAI qos test need will be updated to support this SKU.
…ic-net#7817) Signed-off-by: Jing Kan jika@microsoft.com
Conflicts: platform/broadcom/sai.mk platform/mellanox/mlnx-platform-api/sonic_platform/psu.py platform/mellanox/mlnx-platform-api/sonic_platform/sfp.py platform/mellanox/mlnx-platform-api/sonic_platform/utils.py rules/sonic-config.dep src/sonic-yang-models/setup.py src/sonic-yang-models/tests/files/sample_config_db.json
This PR contains the following commits: 54b74a2 2021-08-04 [LLDP] Fix lldpshow script to enable display multiple MAC addresses on the same remote physical interface (sonic-net#1657) 0d53b7a 2021-08-03 [sonic_installer] don't print errors when installing an image not supporting app ext (sonic-net#1719) 394e2fb 2021-08-03 Implement script null_route_helper (sonic-net#1737) dd01b56 2021-08-02 disk_check updates: (sonic-net#1736) 8a74d03 2021-07-30 [CLI][show][bgp] Fix the show ip bgp network command (sonic-net#1733) 679a4ba 2021-07-30 [MACsec]: Allow upgrade-docker for macsec container (sonic-net#1716) e9c73e8 2021-07-28 [CLI][MPLS][Show] Added multi ASIC support for 'show mpls command'. Signed-off-by: Basim Shalata <basims@nvidia.com>
Why I did it platform test suite failed for few API's in DellEMC Z9332f platform. How I did it Modified the API's to return the expected values in the script. How to verify it Run platform test suite after making the changes.
#### Why I did it Remove the call to `SonicDBConfig.load_sonic_global_db_config()` in the multi asic functions. The expection is the client calling this function will call `SonicDBConfig.load_sonic_global_db_config()` This PR is dependent on the PR sonic-net/sonic-utilities#1712 #### How to verify it compile sonic-utilities
* SONiC YANG model support for sFlow feature. Signed-off-by: Arthi Sivanantham <arthi_sivanantham@dell.com>
) * Update default cable len to 0m for TD2 (sonic-net#8298) * Update sonic-cfggen tests with the correct cable len Signed-off-by: Neetha John <nejo@microsoft.com> As part of the buffer reclamation efforts for TD2, setting the default cable len to 0m which means unused ports will have a cable len of 0m. Why I did it To align with the changes in sonic-net/sonic-swss#1830 How to verify it - With the default cable len set to 0m and the associated changes in swss, CABLE_LENGTH table had '0m' set for unused ports and accordingly more space was reserved for the shared pool - Cfggen tests passed with the cable len update
…t#8363) #### Why I did it * `arp_update` fails to ping those neighbors over vlan sub interfaces. #### How I did it * modify `arp_update_vars.j2` to get vlan sub interfaces with ipv6 addresses assigned. * modify `arp_update` to send ipv6 pings over those retrieved vlan sub interfaces. Signed-off-by: Longxiang Lyu <lolv@microsoft.com>
armhf build uses native dockerd Signed-off-by: Guohan Lu <lguohan@gmail.com>
Advance utilities submodule head to include: * b540f5f 2021-08-05 | [fast-reboot] revert the change of disabling counter polling before fast-reboot (sonic-net#1744) (HEAD -> master, github/master) [Ying Xie] Signed-off-by: Ying Xie <ying.xie@microsoft.com>
* monitor mux_cable_table in state_db to update dhcp acl
print out the process that hold the dpkg frontend lock. Signed-off-by: Guohan Lu <lguohan@gmail.com>
…6356) the branch refers the branch name that the commit is in, for example master, 202012, 201911, ... In case there is no branch, the name will be HEAD. release is encoded in /etc/sonic/sonic_release file. the file is only available for a release branch. It is not available in master branch. example for master branch ``` build_version: 'master.602-6efc0a88' debian_version: '10.7' kernel_version: '4.19.0-9-2-amd64' asic_type: vs commit_id: '6efc0a88' branch: 'master' release: 'none' build_date: Tue Dec 29 06:54:02 UTC 2020 build_number: 602 built_by: johnar@jenkins-worker-23 ``` example for 202012 release branch ``` build_version: '202012.602-6efc0a88' debian_version: '10.7' kernel_version: '4.19.0-9-2-amd64' asic_type: vs commit_id: '6efc0a88' branch: '202012' release: '202012' build_date: Tue Dec 29 06:54:02 UTC 2020 build_number: 602 built_by: johnar@jenkins-worker-23 ``` Signed-off-by: Guohan Lu <lguohan@gmail.com>
…et#8381) install build dep causes dpkg lock issue in parallel build Signed-off-by: Guohan Lu <lguohan@gmail.com>
* DellEMC: Change PG values for S5232f,Z9264f * change-v1
…#8330) #### Why I did it 1. Add version control for debian* docker image to white list. 2. Always record docker image sha256 value, regardless of white list.
This PR updates the following commits cd3cca7 [Y-Cable][Credo] Credo implementation of YCable class which inherits from YCableBase required for Y-Cable API's in sonic-platform-daemons (#203) bd694b2 Load interval from thermal_policy.json (#178) c43dc17 [sonic_y_cable] add abstract class YCableBase required for Y-cable API support for multiple vendors (#186) Signed-off-by: vaibhav-dahiya <vdahiya@microsoft.com>
This is the continuation of PR 8381 and is needed for debian 11 build. Signed-off-by: Guohan Lu <lguohan@gmail.com>
…et#7965) #### Why I did it hostcfgd is starting at the same time as 'create_switch' method is called on orchagent process. This introduce a degradation on the function execution time which eventually cause the fast-boot flow and a boot scenarion in general to run slower (~6 seconds). This change will delay the start time of this daemon. The aaastatsd will delay as well since it has a dependency on hostcfgd, so it is required to delay both. 90 seconds determined as the maximum allowed downtime for control plane to come back up on fast-boot flow. #### How I did it Add two timers for hostcfgd and aaastatsd services in order to delay the startup of these services. #### How to verify it Install an image with this change and observe the daemons start 90 seconds after the system boot.
…#8391) Fix warning shown during compilation [ DPKG ] Cache is not enabled for opennsl-modules-dnx_5.0.0.4_amd64.deb package
…e it to connect to dockerd (sonic-net#8398) Use DOCKER_HOST. Every client including docker command and python docker API uses this environment variable to connect to dockerd. Signed-off-by: Stepan Blyschak <stepanb@nvidia.com>
…et#8210) Signed-off-by: Rajkumar Pennadam Ramamoorthy rpennadamram@marvell.com Why I did it Install sonic image from ONIE. Once system is up, execute "config reload" command. Root cause is that "determine-reboot-cause.service" was in failed state. root@sonic:/host/reboot-cause# systemctl list-units --failed UNIT LOAD ACTIVE SUB DESCRIPTION ● determine-reboot-cause.service loaded failed failed Reboot cause determination service How I did it Fixed the issue by setting default reason to "REBOOT_CAUSE_UNKNOWN" instead of "None". How to verify it Check " determine-reboot-cause.service' loaded successfully post image installation from ONIE. Verify "reboot-cause.txt" file is created and config reload succeeds.
Junchao-Mellanox
pushed a commit
that referenced
this pull request
Nov 25, 2021
e466ac226c48cf87f83aa5564efd7155ac97a0c1 (HEAD -> master, origin/master, origin/HEAD) Reject incorrect CIDR addresses while configuring routes (#91) 07cf59d866914ef7cb6901d51f289f0bee721e44 [CI] Set up Azure pipeline (#89) 47476acdfaf668ab0cd9ae2443205a3bdc2e9ef9 Upgrade Go version to 1.14 (#90) ee887c785c10d8b4f70db90ca50cc398327c5d73 Added flag to make go/pkg/ folder writable (removable) (#87) 6cfc8fe110c46a1ee5a8430e02a440b5a7b4006d (origin/shilongliu/azp) Default Vrf static route support (#85) d3e8b8e4aee278fa11d7d86acabdab3fffc70d5a Add BFD config to subinterface and neighbor (#68) 8d4fd4a56b637d3b7403c321aef36b8dff58cd62 Fix WS-2018-0594 potential non-random UUIDs security issue (#78) fad87fa20f6b15e28c90e02a131c44d236d6a751 Update API description for default vrf and ecmp routes (#82) Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>
Junchao-Mellanox
pushed a commit
that referenced
this pull request
Nov 21, 2023
…utomatically (sonic-net#17083) #### Why I did it src/sonic-host-services ``` * beb8bbe - (HEAD -> master, origin/master, origin/HEAD) [DualToR][caclmgrd] Fix IPtables rules for multiple vlan interfaces for DualToR config (#82) (3 hours ago) [vdahiya12] ``` #### How I did it #### How to verify it #### Description for the changelog
Junchao-Mellanox
pushed a commit
that referenced
this pull request
Nov 30, 2023
…utomatically (sonic-net#17229) #### Why I did it src/sonic-host-services ``` * 689395a - (HEAD -> 202305, origin/202305) Updated the iptable rule to use parent/base name of midplane interface of chassis. (#75) (2 days ago) [abdosi] * 45212a8 - [DualToR][caclmgrd] Fix IPtables rules for multiple vlan interfaces for DualToR config (#82) (2 days ago) [vdahiya12] ``` #### How I did it #### How to verify it #### Description for the changelog
Junchao-Mellanox
pushed a commit
that referenced
this pull request
Apr 2, 2024
…e latest HEAD automatically (sonic-net#18374) #### Why I did it src/wpasupplicant/sonic-wpa-supplicant ``` * 13e6f1100 - (HEAD -> master, origin/master, origin/HEAD) Fix a memory leak introduced by last commit for high level EVP API #82 (64 minutes ago) [xumia] |\ | failure_prs.log 225157a01 - Merge branch 'master' into master (3 days ago) [wumiao_nokia] | |\ | |/ |/| * | 413704a6c - Provide CMAC high level API replacement #81 (4 days ago) [xumia] | failure_prs.log c7eafc778 - Fix a memory leak introduced by last commit for high level EVP API for CMAC (3 days ago) [wumiao_nokia] |/ * 8521d4abb - Fix a port issue (6 days ago) [wumiao_nokia] * 01a39044a - Provide CMAC high level API replacement (6 days ago) [wumiao_nokia] ``` #### How I did it #### How to verify it #### Description for the changelog
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Why I did it
How I did it
How to verify it
Which release branch to backport (provide reason below if selected)
Description for the changelog
A picture of a cute animal (not mandatory but encouraged)