forked from benirose/O_C-BenisphereSuite
-
Notifications
You must be signed in to change notification settings - Fork 37
Logic
Nicholas Michalek edited this page Jun 14, 2024
·
3 revisions
Logic is a two-input logic module that performs two logical operations at once.
1/3 | 2/4 | |
---|---|---|
TRIG | Operand 1 | Operand 2 |
CV INs | Gate type select for "-CV-" mode | Gate type for "-CV-" mode |
OUTs | Result Ch1 (high/low) | Result Ch2 (high/low) |
- Logical gate type or "-CV-" for each channel
The Digital Inputs act as two logical operands, in the form of gate signals with high being True and low being False. CV Inputs 1 and 2 set the logical gate when the gate selected for the corresponding channel is "-CV-". The results of the logical operations are output as a high (5 volt, when True) or low (0 volt, when False) signal.
Available gate types are:
- AND: True when both inputs are True
- OR: True when either or both inputs are True
- XOR: True when both inputs are different than the other input
- NAND: True when either input is False
- NOR: True when both inputs are False
- XNOR: True when both inputs are the same
Another option, "-CV-" is available. When set to "-CV-" the logical gate type will be set via CV using the corresponding CV input.
Adapted from Logic by Chysn.
This wiki is part of the Phazerville Suite O_C firmware project