-
Notifications
You must be signed in to change notification settings - Fork 37
VectorLFO
Vector LFO is a dual low-frequency oscillator based on Vector Oscillator waveforms. There is a variety of built-in waveforms from which to choose, or you can create your own with the Waveform Editor.
1/3 | 2/4 | |
---|---|---|
TRIG | Sync Clock Ch1 | Sync Clock Ch2 |
CV INs | Freq mod Ch1 | Mix Ch1 into Ch2 |
OUTs | LFO Ch1 | LFO Ch2 + Ch1 mix |
- LFO 1 frequency
- LFO 1 waveform select
- LFO 2 frequency
- LFO 2 waveform select
The LFO range is from .10Hz to 999Hz.
Output A/C is a the output of only LFO 1. LFO 1 can be synchronized with an external clock at Digital 1, and its frequency can be modulated over a 30Hz bi-polar range with CV 1.
Output B/D is a mixed output. By default, it is 100% LFO 2. Increasing voltage to CV 2 mixes in the LFO 1 signal up to a max of 50%/50% of each.
When a new waveshape is selected from the panel, both LFO 1 and LFO 2 will be reset to the beginning of their respective cycles.
VectorLFO is in Hemisphere Suite starting with v1.6.
This wiki is part of the Phazerville Suite O_C firmware project