Seq32
The Seq32 applet reinterprets the 8 pattern storage slots from the original Sequins app as 32-step note sequences. (This will corrupt your Sequins patterns, if you have any!)
Each step has a bipolar range of -32 to +31 (scale degrees) and can be Muted or Accented. Accent currently means a longer gate + glide. Mute means no gate is sent and the Pitch output doesn't change.
Important: In addition to storing applet settings in a Preset, a manual EEPROM Save is necessary to save changes to the global patterns!
| 1/3 | 2/4 | |
|---|---|---|
| TRIG | Clock | Reset |
| CV INs | Sequence Select | Transpose |
| OUTs | Pitch | Gate/Trigger |
- Pattern select #1-8
- Length, per pattern
- Record mode
- Quantizer scale settings (popup editor)
- Transpose
- Edit notes
With certain parameters highlighted for editing, the select button will execute a secondary action:
- Pattern# - Clear pattern
- Length - Randomize current pattern completely
- Transpose - Randomize pitches of current pattern, using transpose as the range
Use the encoder to move the cursor to a step, and push to toggle editing the note value. While editing, use the AuxButton to toggle Mute. Double-click to toggle Accent, indicated by a solid square.
When the small record icon is engaged, the cursor is locked and a crude CV recording mechanism is active. When a clock is received, the sequencer advances, CV1 is captured as pitch, and CV2 is measured as Mute/Unmute/Accent (threshold at 0.5v for Unmute, and 2v for Accent).
It works, but it's a little clumsy because recording pitch/gate with the inputs conflicts with normal operation. This might get reworked in the future.