Fix polarity and names of LEDs #47
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Makes names consistent with schematic. Signed-off-by: Norman James <nkskjames@gmail.com>
|
Hey Norm, This is merged as 4b61633 |
amboar
pushed a commit
to amboar/linux
that referenced
this pull request
Jul 12, 2016
UBSAN reports the following warning from accessing path->path[-1] in set_path_power(): [ 16.078040] ================================================================================ [ 16.078124] UBSAN: Undefined behaviour in sound/pci/hda/hda_generic.c:3981:17 [ 16.078198] index -1 is out of range for type 'hda_nid_t [10]' [ 16.078270] CPU: 2 PID: 1738 Comm: modprobe Not tainted 4.7.0-rc1-wt+ openbmc#47 [ 16.078274] Hardware name: LENOVO 3443CTO/3443CTO, BIOS G6ET23WW (1.02 ) 08/14/2012 [ 16.078278] ffff8800cb246000 ffff8800cb3638b8 ffffffff815c4fe3 0000000000000032 [ 16.078286] ffff8800cb3638e0 ffffffffffffffff ffff8800cb3638d0 ffffffff8162443d [ 16.078294] ffffffffa0894200 ffff8800cb363920 ffffffff81624af7 0000000000000292 [ 16.078302] Call Trace: [ 16.078311] [<ffffffff815c4fe3>] dump_stack+0x86/0xd3 [ 16.078317] [<ffffffff8162443d>] ubsan_epilogue+0xd/0x40 [ 16.078324] [<ffffffff81624af7>] __ubsan_handle_out_of_bounds+0x67/0x70 [ 16.078335] [<ffffffffa087665f>] set_path_power+0x1bf/0x230 [snd_hda_codec_generic] [ 16.078344] [<ffffffffa087880d>] add_pin_power_ctls+0x8d/0xc0 [snd_hda_codec_generic] [ 16.078352] [<ffffffffa087f190>] ? pin_power_down_callback+0x20/0x20 [snd_hda_codec_generic] [ 16.078360] [<ffffffffa0878947>] add_all_pin_power_ctls+0x107/0x150 [snd_hda_codec_generic] [ 16.078370] [<ffffffffa08842b3>] snd_hda_gen_parse_auto_config+0x2d73/0x49e0 [snd_hda_codec_generic] [ 16.078376] [<ffffffff81173360>] ? trace_hardirqs_on_caller+0x1b0/0x2c0 [ 16.078390] [<ffffffffa089df27>] alc_parse_auto_config+0x147/0x310 [snd_hda_codec_realtek] [ 16.078402] [<ffffffffa08a332a>] patch_alc269+0x23a/0x560 [snd_hda_codec_realtek] [ 16.078417] [<ffffffffa0838644>] hda_codec_driver_probe+0xa4/0x1a0 [snd_hda_codec] [ 16.078424] [<ffffffff817bbac1>] driver_probe_device+0x101/0x380 [ 16.078430] [<ffffffff817bbdf9>] __driver_attach+0xb9/0x100 [ 16.078438] [<ffffffff817bbd40>] ? driver_probe_device+0x380/0x380 [ 16.078444] [<ffffffff817b8d20>] bus_for_each_dev+0x70/0xc0 [ 16.078449] [<ffffffff817bb087>] driver_attach+0x27/0x50 [ 16.078454] [<ffffffff817ba956>] bus_add_driver+0x166/0x2c0 [ 16.078460] [<ffffffffa0369000>] ? 0xffffffffa0369000 [ 16.078465] [<ffffffff817bd13d>] driver_register+0x7d/0x130 [ 16.078477] [<ffffffffa083816f>] __hda_codec_driver_register+0x6f/0x90 [snd_hda_codec] [ 16.078488] [<ffffffffa036901e>] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek] [ 16.078493] [<ffffffff8100215e>] do_one_initcall+0x4e/0x1d0 [ 16.078499] [<ffffffff8119f54d>] ? rcu_read_lock_sched_held+0x6d/0x80 [ 16.078504] [<ffffffff813701b1>] ? kmem_cache_alloc_trace+0x391/0x560 [ 16.078510] [<ffffffff812bb314>] ? do_init_module+0x28/0x273 [ 16.078515] [<ffffffff812bb387>] do_init_module+0x9b/0x273 [ 16.078522] [<ffffffff811e3782>] load_module+0x20b2/0x3410 [ 16.078527] [<ffffffff811df140>] ? m_show+0x210/0x210 [ 16.078533] [<ffffffff813b2b26>] ? kernel_read+0x66/0xe0 [ 16.078541] [<ffffffff811e4cfa>] SYSC_finit_module+0xba/0xc0 [ 16.078547] [<ffffffff811e4d1e>] SyS_finit_module+0xe/0x10 [ 16.078552] [<ffffffff81a860fc>] entry_SYSCALL_64_fastpath+0x1f/0xbd [ 16.078556] ================================================================================ Fix by checking path->depth before use. Signed-off-by: Bob Copeland <me@bobcopeland.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
shenki
pushed a commit
that referenced
this pull request
Aug 4, 2016
commit 81e4396 upstream. UBSAN reports the following warning from accessing path->path[-1] in set_path_power(): [ 16.078040] ================================================================================ [ 16.078124] UBSAN: Undefined behaviour in sound/pci/hda/hda_generic.c:3981:17 [ 16.078198] index -1 is out of range for type 'hda_nid_t [10]' [ 16.078270] CPU: 2 PID: 1738 Comm: modprobe Not tainted 4.7.0-rc1-wt+ #47 [ 16.078274] Hardware name: LENOVO 3443CTO/3443CTO, BIOS G6ET23WW (1.02 ) 08/14/2012 [ 16.078278] ffff8800cb246000 ffff8800cb3638b8 ffffffff815c4fe3 0000000000000032 [ 16.078286] ffff8800cb3638e0 ffffffffffffffff ffff8800cb3638d0 ffffffff8162443d [ 16.078294] ffffffffa0894200 ffff8800cb363920 ffffffff81624af7 0000000000000292 [ 16.078302] Call Trace: [ 16.078311] [<ffffffff815c4fe3>] dump_stack+0x86/0xd3 [ 16.078317] [<ffffffff8162443d>] ubsan_epilogue+0xd/0x40 [ 16.078324] [<ffffffff81624af7>] __ubsan_handle_out_of_bounds+0x67/0x70 [ 16.078335] [<ffffffffa087665f>] set_path_power+0x1bf/0x230 [snd_hda_codec_generic] [ 16.078344] [<ffffffffa087880d>] add_pin_power_ctls+0x8d/0xc0 [snd_hda_codec_generic] [ 16.078352] [<ffffffffa087f190>] ? pin_power_down_callback+0x20/0x20 [snd_hda_codec_generic] [ 16.078360] [<ffffffffa0878947>] add_all_pin_power_ctls+0x107/0x150 [snd_hda_codec_generic] [ 16.078370] [<ffffffffa08842b3>] snd_hda_gen_parse_auto_config+0x2d73/0x49e0 [snd_hda_codec_generic] [ 16.078376] [<ffffffff81173360>] ? trace_hardirqs_on_caller+0x1b0/0x2c0 [ 16.078390] [<ffffffffa089df27>] alc_parse_auto_config+0x147/0x310 [snd_hda_codec_realtek] [ 16.078402] [<ffffffffa08a332a>] patch_alc269+0x23a/0x560 [snd_hda_codec_realtek] [ 16.078417] [<ffffffffa0838644>] hda_codec_driver_probe+0xa4/0x1a0 [snd_hda_codec] [ 16.078424] [<ffffffff817bbac1>] driver_probe_device+0x101/0x380 [ 16.078430] [<ffffffff817bbdf9>] __driver_attach+0xb9/0x100 [ 16.078438] [<ffffffff817bbd40>] ? driver_probe_device+0x380/0x380 [ 16.078444] [<ffffffff817b8d20>] bus_for_each_dev+0x70/0xc0 [ 16.078449] [<ffffffff817bb087>] driver_attach+0x27/0x50 [ 16.078454] [<ffffffff817ba956>] bus_add_driver+0x166/0x2c0 [ 16.078460] [<ffffffffa0369000>] ? 0xffffffffa0369000 [ 16.078465] [<ffffffff817bd13d>] driver_register+0x7d/0x130 [ 16.078477] [<ffffffffa083816f>] __hda_codec_driver_register+0x6f/0x90 [snd_hda_codec] [ 16.078488] [<ffffffffa036901e>] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek] [ 16.078493] [<ffffffff8100215e>] do_one_initcall+0x4e/0x1d0 [ 16.078499] [<ffffffff8119f54d>] ? rcu_read_lock_sched_held+0x6d/0x80 [ 16.078504] [<ffffffff813701b1>] ? kmem_cache_alloc_trace+0x391/0x560 [ 16.078510] [<ffffffff812bb314>] ? do_init_module+0x28/0x273 [ 16.078515] [<ffffffff812bb387>] do_init_module+0x9b/0x273 [ 16.078522] [<ffffffff811e3782>] load_module+0x20b2/0x3410 [ 16.078527] [<ffffffff811df140>] ? m_show+0x210/0x210 [ 16.078533] [<ffffffff813b2b26>] ? kernel_read+0x66/0xe0 [ 16.078541] [<ffffffff811e4cfa>] SYSC_finit_module+0xba/0xc0 [ 16.078547] [<ffffffff811e4d1e>] SyS_finit_module+0xe/0x10 [ 16.078552] [<ffffffff81a860fc>] entry_SYSCALL_64_fastpath+0x1f/0xbd [ 16.078556] ================================================================================ Fix by checking path->depth before use. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
amboar
pushed a commit
to amboar/linux
that referenced
this pull request
Dec 23, 2016
Reported by syzkaller:
[ INFO: suspicious RCU usage. ]
4.9.0-rc4+ openbmc#47 Not tainted
-------------------------------
./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage!
stack backtrace:
CPU: 1 PID: 6679 Comm: syz-executor Not tainted 4.9.0-rc4+ openbmc#47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
ffff880039e2f6d0 ffffffff81c2e46b ffff88003e3a5b40 0000000000000000
0000000000000001 ffffffff83215600 ffff880039e2f700 ffffffff81334ea9
ffffc9000730b000 0000000000000004 ffff88003c4f8420 ffff88003d3f8000
Call Trace:
[< inline >] __dump_stack lib/dump_stack.c:15
[<ffffffff81c2e46b>] dump_stack+0xb3/0x118 lib/dump_stack.c:51
[<ffffffff81334ea9>] lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4445
[< inline >] __kvm_memslots include/linux/kvm_host.h:534
[< inline >] kvm_memslots include/linux/kvm_host.h:541
[<ffffffff8105d6ae>] kvm_gfn_to_hva_cache_init+0xa1e/0xce0 virt/kvm/kvm_main.c:1941
[<ffffffff8112685d>] kvm_lapic_set_vapic_addr+0xed/0x140 arch/x86/kvm/lapic.c:2217
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: fda4e2e
Cc: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
shenki
pushed a commit
that referenced
this pull request
Jun 5, 2017
commit 9d7f29c upstream. calculate_min_delta() may incorrectly access a 4th element of buf2[] which only has 3 elements. This may trigger undefined behaviour and has been reported to cause strange crashes in start_kernel() sometime after timer initialization when built with GCC 5.3, possibly due to register/stack corruption: sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns CPU 0 Unable to handle kernel paging request at virtual address ffffb0aa, epc == 8067daa8, ra == 8067da84 Oops[#1]: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.18 #51 task: 8065e3e0 task.stack: 80644000 $ 0 : 00000000 00000001 00000000 00000000 $ 4 : 8065b4d0 00000000 805d0000 00000010 $ 8 : 00000010 80321400 fffff000 812de408 $12 : 00000000 00000000 00000000 ffffffff $16 : 00000002 ffffffff 80660000 806a666c $20 : 806c0000 00000000 00000000 00000000 $24 : 00000000 00000010 $28 : 80644000 80645ed0 00000000 8067da84 Hi : 00000000 Lo : 00000000 epc : 8067daa8 start_kernel+0x33c/0x500 ra : 8067da84 start_kernel+0x318/0x500 Status: 11000402 KERNEL EXL Cause : 4080040c (ExcCode 03) BadVA : ffffb0aa PrId : 0501992c (MIPS 1004Kc) Modules linked in: Process swapper/0 (pid: 0, threadinfo=80644000, task=8065e3e0, tls=00000000) Call Trace: [<8067daa8>] start_kernel+0x33c/0x500 Code: 24050240 0c0131f9 24849c64 <a200b0a8> 41606020 000000c0 0c1a45e6 00000000 0c1a5f44 UBSAN also detects the same issue: ================================================================ UBSAN: Undefined behaviour in arch/mips/kernel/cevt-r4k.c:85:41 load of address 80647e4c with insufficient space for an object of type 'unsigned int' CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.18 #47 Call Trace: [<80028f70>] show_stack+0x88/0xa4 [<80312654>] dump_stack+0x84/0xc0 [<8034163c>] ubsan_epilogue+0x14/0x50 [<803417d8>] __ubsan_handle_type_mismatch+0x160/0x168 [<8002dab0>] r4k_clockevent_init+0x544/0x764 [<80684d34>] time_init+0x18/0x90 [<8067fa5c>] start_kernel+0x2f0/0x500 ================================================================= buf2[] is intentionally only 3 elements so that the last element is the median once 5 samples have been inserted, so explicitly prevent the possibility of comparing against the 4th element rather than extending the array. Fixes: 1fa4055 ("MIPS: cevt-r4k: Dynamically calculate min_delta_ns") Reported-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Tested-by: Rabin Vincent <rabinv@axis.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15892/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
amboar
pushed a commit
to amboar/linux
that referenced
this pull request
Jul 4, 2017
…e spin_lock This patch uses spin_lock_init() instead of __SPIN_LOCK_UNLOCKED() to initialize the per namespace net->can.can_rcvlists_lock lock to fix this lockdep warning: | INFO: trying to register non-static key. | the code is fine but needs lockdep annotation. | turning off the locking correctness validator. | CPU: 0 PID: 186 Comm: candump Not tainted 4.12.0-rc3+ openbmc#47 | Hardware name: Marvell Kirkwood (Flattened Device Tree) | [<c0016644>] (unwind_backtrace) from [<c00139a8>] (show_stack+0x18/0x1c) | [<c00139a8>] (show_stack) from [<c0058c8c>] (register_lock_class+0x1e4/0x55c) | [<c0058c8c>] (register_lock_class) from [<c005bdfc>] (__lock_acquire+0x148/0x1990) | [<c005bdfc>] (__lock_acquire) from [<c005deec>] (lock_acquire+0x174/0x210) | [<c005deec>] (lock_acquire) from [<c04a6780>] (_raw_spin_lock+0x50/0x88) | [<c04a6780>] (_raw_spin_lock) from [<bf02116c>] (can_rx_register+0x94/0x15c [can]) | [<bf02116c>] (can_rx_register [can]) from [<bf02a868>] (raw_enable_filters+0x60/0xc0 [can_raw]) | [<bf02a868>] (raw_enable_filters [can_raw]) from [<bf02ac14>] (raw_enable_allfilters+0x2c/0xa0 [can_raw]) | [<bf02ac14>] (raw_enable_allfilters [can_raw]) from [<bf02ad38>] (raw_bind+0xb0/0x250 [can_raw]) | [<bf02ad38>] (raw_bind [can_raw]) from [<c03b5fb8>] (SyS_bind+0x70/0xac) | [<c03b5fb8>] (SyS_bind) from [<c000f8c0>] (ret_fast_syscall+0x0/0x1c) Cc: Mario Kicherer <dev@kicherer.org> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
shenki
pushed a commit
that referenced
this pull request
May 21, 2019
[ Upstream commit 36096f2 ] kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1 CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_del_entry_valid+0x53/0x90 Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48 89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2 RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000 FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0 Call Trace: unregister_pernet_operations+0x34/0x120 unregister_pernet_subsys+0x1c/0x30 packet_exit+0x1c/0x369 [af_packet __x64_sys_delete_module+0x156/0x260 ? lockdep_hardirqs_on+0x133/0x1b0 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x6e/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe When modprobe af_packet, register_pernet_subsys fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
shenki
pushed a commit
that referenced
this pull request
Jan 14, 2020
commit 9d05c18 upstream. When enabling ftrace graph tracer, it gets the tracing clock in ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock() to get the clock value. If riscv_sched_clock() isn't marked with 'notrace', it will call ftrace_push_return_trace() and cause infinite loop. The result of failure as follow: command: echo function_graph >current_tracer [ 46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48 [ 46.177309] Oops [#1] [ 46.177478] Modules linked in: [ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47 [ 46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0 [ 46.178216] gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968 [ 46.178430] t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0 [ 46.178643] s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411 [ 46.178856] a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48 [ 46.179099] a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005 [ 46.179338] s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58 [ 46.179570] s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003 [ 46.179809] s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004 [ 46.180053] s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90 [ 46.180293] t5 : ffffffe000d29658 t6 : 0000000000040000 [ 46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> [paul.walmsley@sifive.com: cleaned up patch description] Fixes: 92e0d14 ("clocksource/drivers/riscv_timer: Provide the sched_clock") Cc: stable@vger.kernel.org Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
shenki
pushed a commit
that referenced
this pull request
May 5, 2020
[ Upstream commit a866759 ] This reverts commit 64e62bd. This commit ends up causing some lockdep splats due to trying to grab the payload lock while holding the mgr's lock: [ 54.010099] [ 54.011765] ====================================================== [ 54.018670] WARNING: possible circular locking dependency detected [ 54.025577] 5.5.0-rc6-02274-g77381c23ee63 #47 Not tainted [ 54.031610] ------------------------------------------------------ [ 54.038516] kworker/1:6/1040 is trying to acquire lock: [ 54.044354] ffff888272af3228 (&mgr->payload_lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.054957] [ 54.054957] but task is already holding lock: [ 54.061473] ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.071193] [ 54.071193] which lock already depends on the new lock. [ 54.071193] [ 54.080334] [ 54.080334] the existing dependency chain (in reverse order) is: [ 54.088697] [ 54.088697] -> #1 (&mgr->lock){+.+.}: [ 54.094440] __mutex_lock+0xc3/0x498 [ 54.099015] drm_dp_mst_topology_get_port_validated+0x25/0x80 [ 54.106018] drm_dp_update_payload_part1+0xa2/0x2e2 [ 54.112051] intel_mst_pre_enable_dp+0x144/0x18f [ 54.117791] intel_encoders_pre_enable+0x63/0x70 [ 54.123532] hsw_crtc_enable+0xa1/0x722 [ 54.128396] intel_update_crtc+0x50/0x194 [ 54.133455] skl_commit_modeset_enables+0x40c/0x540 [ 54.139485] intel_atomic_commit_tail+0x5f7/0x130d [ 54.145418] intel_atomic_commit+0x2c8/0x2d8 [ 54.150770] drm_atomic_helper_set_config+0x5a/0x70 [ 54.156801] drm_mode_setcrtc+0x2ab/0x833 [ 54.161862] drm_ioctl+0x2e5/0x424 [ 54.166242] vfs_ioctl+0x21/0x2f [ 54.170426] do_vfs_ioctl+0x5fb/0x61e [ 54.175096] ksys_ioctl+0x55/0x75 [ 54.179377] __x64_sys_ioctl+0x1a/0x1e [ 54.184146] do_syscall_64+0x5c/0x6d [ 54.188721] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 54.194946] [ 54.194946] -> #0 (&mgr->payload_lock){+.+.}: [ 54.201463] [ 54.201463] other info that might help us debug this: [ 54.201463] [ 54.210410] Possible unsafe locking scenario: [ 54.210410] [ 54.217025] CPU0 CPU1 [ 54.222082] ---- ---- [ 54.227138] lock(&mgr->lock); [ 54.230643] lock(&mgr->payload_lock); [ 54.237742] lock(&mgr->lock); [ 54.244062] lock(&mgr->payload_lock); [ 54.248346] [ 54.248346] *** DEADLOCK *** [ 54.248346] [ 54.254959] 7 locks held by kworker/1:6/1040: [ 54.259822] #0: ffff888275c4f528 ((wq_completion)events){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.269451] #1: ffffc9000119beb0 ((work_completion)(&(&dev_priv->hotplug.hotplug_work)->work)){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.282768] #2: ffff888272a403f0 (&dev->mode_config.mutex){+.+.}, at: i915_hotplug_work_func+0x4b/0x2be [ 54.293368] #3: ffffffff824fc6c0 (drm_connector_list_iter){.+.+}, at: i915_hotplug_work_func+0x17e/0x2be [ 54.304061] #4: ffffc9000119bc58 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x40/0xfd [ 54.314855] #5: ffff888272a40470 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x74/0xe2 [ 54.324385] #6: ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.334597] [ 54.334597] stack backtrace: [ 54.339464] CPU: 1 PID: 1040 Comm: kworker/1:6 Not tainted 5.5.0-rc6-02274-g77381c23ee63 #47 [ 54.348893] Hardware name: Google Fizz/Fizz, BIOS Google_Fizz.10139.39.0 01/04/2018 [ 54.357451] Workqueue: events i915_hotplug_work_func [ 54.362995] Call Trace: [ 54.365724] dump_stack+0x71/0x9c [ 54.369427] check_noncircular+0x91/0xbc [ 54.373809] ? __lock_acquire+0xc9e/0xf66 [ 54.378286] ? __lock_acquire+0xc9e/0xf66 [ 54.382763] ? lock_acquire+0x175/0x1ac [ 54.387048] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.393177] ? __mutex_lock+0xc3/0x498 [ 54.397362] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.403492] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.409620] ? drm_dp_dpcd_access+0xd9/0x101 [ 54.414390] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.420517] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.426645] ? intel_digital_port_connected+0x34d/0x35c [ 54.432482] ? intel_dp_detect+0x227/0x44e [ 54.437056] ? ww_mutex_lock+0x49/0x9a [ 54.441242] ? drm_helper_probe_detect_ctx+0x75/0xfd [ 54.446789] ? intel_encoder_hotplug+0x4b/0x97 [ 54.451752] ? intel_ddi_hotplug+0x61/0x2e0 [ 54.456423] ? mark_held_locks+0x53/0x68 [ 54.460803] ? _raw_spin_unlock_irqrestore+0x3a/0x51 [ 54.466347] ? lockdep_hardirqs_on+0x187/0x1a4 [ 54.471310] ? drm_connector_list_iter_next+0x89/0x9a [ 54.476953] ? i915_hotplug_work_func+0x206/0x2be [ 54.482208] ? worker_thread+0x4d5/0x6e2 [ 54.486587] ? worker_thread+0x455/0x6e2 [ 54.490966] ? queue_work_on+0x64/0x64 [ 54.495151] ? kthread+0x1e9/0x1f1 [ 54.498946] ? queue_work_on+0x64/0x64 [ 54.503130] ? kthread_unpark+0x5e/0x5e [ 54.507413] ? ret_from_fork+0x3a/0x50 The proper fix for this is probably cleanup the VCPI allocations when we're enabling the topology, or on the first payload allocation. For now though, let's just revert. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 64e62bd ("drm/dp_mst: Remove VCPI while disabling topology mgr") Cc: Sean Paul <sean@poorly.run> Cc: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200117205149.97262-1-lyude@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
shenki
pushed a commit
that referenced
this pull request
Sep 28, 2020
[ Upstream commit 32f6865 ] Running the eBPF test_verifier leads to random errors looking like this: [ 6525.735488] Unexpected kernel BRK exception at EL1 [ 6525.735502] Internal error: ptrace BRK handler: f2000100 [#1] SMP [ 6525.741609] Modules linked in: nls_utf8 cifs libdes libarc4 dns_resolver fscache binfmt_misc nls_ascii nls_cp437 vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul efi_pstore sha2_ce sha256_arm64 sha1_ce evdev efivars efivarfs ip_tables x_tables autofs4 btrfs blake2b_generic xor xor_neon zstd_compress raid6_pq libcrc32c crc32c_generic ahci xhci_pci libahci xhci_hcd igb libata i2c_algo_bit nvme realtek usbcore nvme_core scsi_mod t10_pi netsec mdio_devres of_mdio gpio_keys fixed_phy libphy gpio_mb86s7x [ 6525.787760] CPU: 3 PID: 7881 Comm: test_verifier Tainted: G W 5.9.0-rc1+ #47 [ 6525.796111] Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #1 Jun 6 2020 [ 6525.804812] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--) [ 6525.810390] pc : bpf_prog_c3d01833289b6311_F+0xc8/0x9f4 [ 6525.815613] lr : bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c [ 6525.820832] sp : ffff8000130cbb80 [ 6525.824141] x29: ffff8000130cbbb0 x28: 0000000000000000 [ 6525.829451] x27: 000005ef6fcbf39b x26: 0000000000000000 [ 6525.834759] x25: ffff8000130cbb80 x24: ffff800011dc7038 [ 6525.840067] x23: ffff8000130cbd00 x22: ffff0008f624d080 [ 6525.845375] x21: 0000000000000001 x20: ffff800011dc7000 [ 6525.850682] x19: 0000000000000000 x18: 0000000000000000 [ 6525.855990] x17: 0000000000000000 x16: 0000000000000000 [ 6525.861298] x15: 0000000000000000 x14: 0000000000000000 [ 6525.866606] x13: 0000000000000000 x12: 0000000000000000 [ 6525.871913] x11: 0000000000000001 x10: ffff8000000a660c [ 6525.877220] x9 : ffff800010951810 x8 : ffff8000130cbc38 [ 6525.882528] x7 : 0000000000000000 x6 : 0000009864cfa881 [ 6525.887836] x5 : 00ffffffffffffff x4 : 002880ba1a0b3e9f [ 6525.893144] x3 : 0000000000000018 x2 : ffff8000000a4374 [ 6525.898452] x1 : 000000000000000a x0 : 0000000000000009 [ 6525.903760] Call trace: [ 6525.906202] bpf_prog_c3d01833289b6311_F+0xc8/0x9f4 [ 6525.911076] bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c [ 6525.915957] bpf_dispatcher_xdp_func+0x14/0x20 [ 6525.920398] bpf_test_run+0x70/0x1b0 [ 6525.923969] bpf_prog_test_run_xdp+0xec/0x190 [ 6525.928326] __do_sys_bpf+0xc88/0x1b28 [ 6525.932072] __arm64_sys_bpf+0x24/0x30 [ 6525.935820] el0_svc_common.constprop.0+0x70/0x168 [ 6525.940607] do_el0_svc+0x28/0x88 [ 6525.943920] el0_sync_handler+0x88/0x190 [ 6525.947838] el0_sync+0x140/0x180 [ 6525.951154] Code: d4202000 d4202000 d4202000 d4202000 (d4202000) [ 6525.957249] ---[ end trace cecc3f93b14927e2 ]--- The reason is the offset[] creation and later usage, while building the eBPF body. The code currently omits the first instruction, since build_insn() will increase our ctx->idx before saving it. That was fine up until bounded eBPF loops were introduced. After that introduction, offset[0] must be the offset of the end of prologue which is the start of the 1st insn while, offset[n] holds the offset of the end of n-th insn. When "taken loop with back jump to 1st insn" test runs, it will eventually call bpf2a64_offset(-1, 2, ctx). Since negative indexing is permitted, the current outcome depends on the value stored in ctx->offset[-1], which has nothing to do with our array. If the value happens to be 0 the tests will work. If not this error triggers. commit 7c2e988 ("bpf: fix x64 JIT code generation for jmp to 1st insn") fixed an indentical bug on x86 when eBPF bounded loops were introduced. So let's fix it by creating the ctx->offset[] differently. Track the beginning of instruction and account for the extra instruction while calculating the arm instruction offsets. Fixes: 2589726 ("bpf: introduce bounded loops") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: Jiri Olsa <jolsa@kernel.org> Co-developed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Co-developed-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200917084925.177348-1-ilias.apalodimas@linaro.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
shenki
pushed a commit
that referenced
this pull request
May 24, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== #45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 #46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== #30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20210426192949.416837-4-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
shenki
pushed a commit
that referenced
this pull request
May 24, 2021
[ Upstream commit d5027ca ] Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted): (gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144 indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started. This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init(). Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init(). Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work. Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default. Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible. Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there. [1] https://bugs.debian.org/983379 Reported-by: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Tested-By: Ritesh Raj Sarraf <rrs@debian.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
shenki
pushed a commit
that referenced
this pull request
Jan 14, 2022
[ Upstream commit ffb76a8 ] Hi, When testing install and uninstall of ipmi_si.ko and ipmi_msghandler.ko, the system crashed. The log as follows: [ 141.087026] BUG: unable to handle kernel paging request at ffffffffc09b3a5a [ 141.087241] PGD 8fe4c0d067 P4D 8fe4c0d067 PUD 8fe4c0f067 PMD 103ad89067 PTE 0 [ 141.087464] Oops: 0010 [#1] SMP NOPTI [ 141.087580] CPU: 67 PID: 668 Comm: kworker/67:1 Kdump: loaded Not tainted 4.18.0.x86_64 #47 [ 141.088009] Workqueue: events 0xffffffffc09b3a40 [ 141.088009] RIP: 0010:0xffffffffc09b3a5a [ 141.088009] Code: Bad RIP value. [ 141.088009] RSP: 0018:ffffb9094e2c3e88 EFLAGS: 00010246 [ 141.088009] RAX: 0000000000000000 RBX: ffff9abfdb1f04a0 RCX: 0000000000000000 [ 141.088009] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 141.088009] RBP: 0000000000000000 R08: ffff9abfffee3cb8 R09: 00000000000002e1 [ 141.088009] R10: ffffb9094cb73d90 R11: 00000000000f4240 R12: ffff9abfffee8700 [ 141.088009] R13: 0000000000000000 R14: ffff9abfdb1f04a0 R15: ffff9abfdb1f04a8 [ 141.088009] FS: 0000000000000000(0000) GS:ffff9abfffec0000(0000) knlGS:0000000000000000 [ 141.088009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 141.088009] CR2: ffffffffc09b3a30 CR3: 0000008fe4c0a001 CR4: 00000000007606e0 [ 141.088009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 141.088009] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 141.088009] PKRU: 55555554 [ 141.088009] Call Trace: [ 141.088009] ? process_one_work+0x195/0x390 [ 141.088009] ? worker_thread+0x30/0x390 [ 141.088009] ? process_one_work+0x390/0x390 [ 141.088009] ? kthread+0x10d/0x130 [ 141.088009] ? kthread_flush_work_fn+0x10/0x10 [ 141.088009] ? ret_from_fork+0x35/0x40] BUG: unable to handle kernel paging request at ffffffffc0b28a5a [ 200.223240] PGD 97fe00d067 P4D 97fe00d067 PUD 97fe00f067 PMD a580cbf067 PTE 0 [ 200.223464] Oops: 0010 [#1] SMP NOPTI [ 200.223579] CPU: 63 PID: 664 Comm: kworker/63:1 Kdump: loaded Not tainted 4.18.0.x86_64 #46 [ 200.224008] Workqueue: events 0xffffffffc0b28a40 [ 200.224008] RIP: 0010:0xffffffffc0b28a5a [ 200.224008] Code: Bad RIP value. [ 200.224008] RSP: 0018:ffffbf3c8e2a3e88 EFLAGS: 00010246 [ 200.224008] RAX: 0000000000000000 RBX: ffffa0799ad6bca0 RCX: 0000000000000000 [ 200.224008] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 [ 200.224008] RBP: 0000000000000000 R08: ffff9fe43fde3cb8 R09: 00000000000000d5 [ 200.224008] R10: ffffbf3c8cb53d90 R11: 00000000000f4240 R12: ffff9fe43fde8700 [ 200.224008] R13: 0000000000000000 R14: ffffa0799ad6bca0 R15: ffffa0799ad6bca8 [ 200.224008] FS: 0000000000000000(0000) GS:ffff9fe43fdc0000(0000) knlGS:0000000000000000 [ 200.224008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.224008] CR2: ffffffffc0b28a30 CR3: 00000097fe00a002 CR4: 00000000007606e0 [ 200.224008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 200.224008] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 200.224008] PKRU: 55555554 [ 200.224008] Call Trace: [ 200.224008] ? process_one_work+0x195/0x390 [ 200.224008] ? worker_thread+0x30/0x390 [ 200.224008] ? process_one_work+0x390/0x390 [ 200.224008] ? kthread+0x10d/0x130 [ 200.224008] ? kthread_flush_work_fn+0x10/0x10 [ 200.224008] ? ret_from_fork+0x35/0x40 [ 200.224008] kernel fault(0x1) notification starting on CPU 63 [ 200.224008] kernel fault(0x1) notification finished on CPU 63 [ 200.224008] CR2: ffffffffc0b28a5a [ 200.224008] ---[ end trace c82a412d93f57412 ]--- The reason is as follows: T1: rmmod ipmi_si. ->ipmi_unregister_smi() -> ipmi_bmc_unregister() -> __ipmi_bmc_unregister() -> kref_put(&bmc->usecount, cleanup_bmc_device); -> schedule_work(&bmc->remove_work); T2: rmmod ipmi_msghandler. ipmi_msghander module uninstalled, and the module space will be freed. T3: bmc->remove_work doing cleanup the bmc resource. -> cleanup_bmc_work() -> platform_device_unregister(&bmc->pdev); -> platform_device_del(pdev); -> device_del(&pdev->dev); -> kobject_uevent(&dev->kobj, KOBJ_REMOVE); -> kobject_uevent_env() -> dev_uevent() -> if (dev->type && dev->type->name) 'dev->type'(bmc_device_type) pointer space has freed when uninstall ipmi_msghander module, 'dev->type->name' cause the system crash. drivers/char/ipmi/ipmi_msghandler.c: 2820 static const struct device_type bmc_device_type = { 2821 .groups = bmc_dev_attr_groups, 2822 }; Steps to reproduce: Add a time delay in cleanup_bmc_work() function, and uninstall ipmi_si and ipmi_msghandler module. 2910 static void cleanup_bmc_work(struct work_struct *work) 2911 { 2912 struct bmc_device *bmc = container_of(work, struct bmc_device, 2913 remove_work); 2914 int id = bmc->pdev.id; /* Unregister overwrites id */ 2915 2916 msleep(3000); <--- 2917 platform_device_unregister(&bmc->pdev); 2918 ida_simple_remove(&ipmi_bmc_ida, id); 2919 } Use 'remove_work_wq' instead of 'system_wq' to solve this issues. Fixes: b2cfd8a ("ipmi: Rework device id and guid handling to catch changing BMCs") Signed-off-by: Wu Bo <wubo40@huawei.com> Message-Id: <1640070034-56671-1-git-send-email-wubo40@huawei.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
shenki
pushed a commit
that referenced
this pull request
Nov 28, 2022
[ Upstream commit 03c1f1e ] syzbot reported a warning like below [1]: WARNING: CPU: 3 PID: 9 at net/netfilter/nf_tables_api.c:10096 nf_tables_exit_net+0x71c/0x840 Modules linked in: CPU: 2 PID: 9 Comm: kworker/u8:0 Tainted: G W 6.1.0-rc3-00072-g8e5423e991e8 #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:nf_tables_exit_net+0x71c/0x840 ... Call Trace: <TASK> ? __nft_release_table+0xfc0/0xfc0 ops_exit_list+0xb5/0x180 cleanup_net+0x506/0xb10 ? unregister_pernet_device+0x80/0x80 process_one_work+0xa38/0x1730 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 ? rwlock_bug.part.0+0x90/0x90 ? _raw_spin_lock_irq+0x46/0x50 worker_thread+0x67e/0x10e0 ? process_one_work+0x1730/0x1730 kthread+0x2e5/0x3a0 ? kthread_complete_and_exit+0x40/0x40 ret_from_fork+0x1f/0x30 </TASK> In nf_tables_exit_net(), there is a case where nft_net->commit_list is empty but nft_net->module_list is not empty. Such a case occurs with the following scenario: 1. nfnetlink_rcv_batch() is called 2. nf_tables_newset() returns -EAGAIN and NFNL_BATCH_FAILURE bit is set to status 3. nf_tables_abort() is called with NFNL_ABORT_AUTOLOAD (nft_net->commit_list is released, but nft_net->module_list is not because of NFNL_ABORT_AUTOLOAD flag) 4. Jump to replay label 5. netlink_skb_clone() fails and returns from the function (this is caused by fault injection in the reproducer of syzbot) This patch fixes this issue by calling __nf_tables_abort() when nft_net->module_list is not empty in nf_tables_exit_net(). Fixes: eb014de ("netfilter: nf_tables: autoload modules from the abort path") Link: https://syzkaller.appspot.com/bug?id=802aba2422de4218ad0c01b46c9525cc9d4e4aa3 [1] Reported-by: syzbot+178efee9e2d7f87f5103@syzkaller.appspotmail.com Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
shenki
pushed a commit
that referenced
this pull request
Nov 28, 2022
[ Upstream commit 03c1f1e ] syzbot reported a warning like below [1]: WARNING: CPU: 3 PID: 9 at net/netfilter/nf_tables_api.c:10096 nf_tables_exit_net+0x71c/0x840 Modules linked in: CPU: 2 PID: 9 Comm: kworker/u8:0 Tainted: G W 6.1.0-rc3-00072-g8e5423e991e8 #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:nf_tables_exit_net+0x71c/0x840 ... Call Trace: <TASK> ? __nft_release_table+0xfc0/0xfc0 ops_exit_list+0xb5/0x180 cleanup_net+0x506/0xb10 ? unregister_pernet_device+0x80/0x80 process_one_work+0xa38/0x1730 ? pwq_dec_nr_in_flight+0x2b0/0x2b0 ? rwlock_bug.part.0+0x90/0x90 ? _raw_spin_lock_irq+0x46/0x50 worker_thread+0x67e/0x10e0 ? process_one_work+0x1730/0x1730 kthread+0x2e5/0x3a0 ? kthread_complete_and_exit+0x40/0x40 ret_from_fork+0x1f/0x30 </TASK> In nf_tables_exit_net(), there is a case where nft_net->commit_list is empty but nft_net->module_list is not empty. Such a case occurs with the following scenario: 1. nfnetlink_rcv_batch() is called 2. nf_tables_newset() returns -EAGAIN and NFNL_BATCH_FAILURE bit is set to status 3. nf_tables_abort() is called with NFNL_ABORT_AUTOLOAD (nft_net->commit_list is released, but nft_net->module_list is not because of NFNL_ABORT_AUTOLOAD flag) 4. Jump to replay label 5. netlink_skb_clone() fails and returns from the function (this is caused by fault injection in the reproducer of syzbot) This patch fixes this issue by calling __nf_tables_abort() when nft_net->module_list is not empty in nf_tables_exit_net(). Fixes: eb014de ("netfilter: nf_tables: autoload modules from the abort path") Link: https://syzkaller.appspot.com/bug?id=802aba2422de4218ad0c01b46c9525cc9d4e4aa3 [1] Reported-by: syzbot+178efee9e2d7f87f5103@syzkaller.appspotmail.com Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
shenki
pushed a commit
that referenced
this pull request
Oct 26, 2023
commit 72377ab upstream. Christoph reported that the MPTCP protocol can find the subflow-level write queue unexpectedly not empty while crafting a zero-window probe, hitting a warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 188 at net/mptcp/protocol.c:1312 mptcp_sendmsg_frag+0xc06/0xe70 Modules linked in: CPU: 0 PID: 188 Comm: kworker/0:2 Not tainted 6.6.0-rc2-g1176aa719d7a #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:mptcp_sendmsg_frag+0xc06/0xe70 net/mptcp/protocol.c:1312 RAX: 47d0530de347ff6a RBX: 47d0530de347ff6b RCX: ffff8881015d3c00 RDX: ffff8881015d3c00 RSI: 47d0530de347ff6b RDI: 47d0530de347ff6b RBP: 47d0530de347ff6b R08: ffffffff8243c6a8 R09: ffffffff82042d9c R10: 0000000000000002 R11: ffffffff82056850 R12: ffff88812a13d580 R13: 0000000000000001 R14: ffff88812b375e50 R15: ffff88812bbf3200 FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000695118 CR3: 0000000115dfc001 CR4: 0000000000170ef0 Call Trace: <TASK> __subflow_push_pending+0xa4/0x420 net/mptcp/protocol.c:1545 __mptcp_push_pending+0x128/0x3b0 net/mptcp/protocol.c:1614 mptcp_release_cb+0x218/0x5b0 net/mptcp/protocol.c:3391 release_sock+0xf6/0x100 net/core/sock.c:3521 mptcp_worker+0x6e8/0x8f0 net/mptcp/protocol.c:2746 process_scheduled_works+0x341/0x690 kernel/workqueue.c:2630 worker_thread+0x3a7/0x610 kernel/workqueue.c:2784 kthread+0x143/0x180 kernel/kthread.c:388 ret_from_fork+0x4d/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:304 </TASK> The root cause of the issue is that expectations are wrong: e.g. due to MPTCP-level re-injection we can hit the critical condition. Explicitly avoid the zero-window probe when the subflow write queue is not empty and drop the related warnings. Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: multipath-tcp/mptcp_net-next#444 Fixes: f70cad1 ("mptcp: stop relying on tcp_tx_skb_cache") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-3-17ecb002e41d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
amboar
pushed a commit
that referenced
this pull request
Feb 11, 2024
[ Upstream commit 36a8738 ] The test_tag test triggers an unhandled page fault: # ./test_tag [ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70 [ 130.640501] Oops[#3]: [ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a [ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40 [ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000 [ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000 [ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70 [ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0 [ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0 [ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000 [ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000 [ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988 [ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988 [ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 130.642658] BADV: ffff80001b898004 [ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)] [ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd) [ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8 [ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0 [ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000 [ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000 [ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000 [ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000 [ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558 [ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000 [ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc [ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0 [ 130.644572] ... [ 130.644629] Call Trace: [ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988 [ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec [ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0 [ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44 [ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588 [ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c [ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94 [ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158 [ 130.645507] [ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91 [ 130.645729] [ 130.646418] ---[ end trace 0000000000000000 ]--- On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at loading a BPF prog with 2039 instructions: prog = (struct bpf_prog *)ffff80001b894000 insn = (struct bpf_insn *)(prog->insnsi)ffff80001b894048 insn + 2039 = (struct bpf_insn *)ffff80001b898000 <- end of the page In the build_insn() function, we are trying to access next instruction unconditionally, i.e. `(insn + 1)->imm`. The address lies in the next page and can be not owned by the current process, thus an page fault is inevitable and then segfault. So, let's access next instruction only under `dst = imm64` context. With this fix, we have: # ./test_tag test_tag: OK (40945 tests) Fixes: bbfddb9 ("LoongArch: BPF: Avoid declare variables in switch-case") Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Sasha Levin <sashal@kernel.org>
amboar
pushed a commit
that referenced
this pull request
Jul 10, 2024
commit ab9e0c5 upstream. If e.g. the ata_port_alloc() call in ata_host_alloc() fails, we will jump to the err_out label, which will call devres_release_group(). devres_release_group() will trigger a call to ata_host_release(). ata_host_release() calls kfree(host), so executing the kfree(host) in ata_host_alloc() will lead to a double free: kernel BUG at mm/slub.c:553! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 11 PID: 599 Comm: (udev-worker) Not tainted 6.10.0-rc5 #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:kfree+0x2cf/0x2f0 Code: 5d 41 5e 41 5f 5d e9 80 d6 ff ff 4d 89 f1 41 b8 01 00 00 00 48 89 d9 48 89 da RSP: 0018:ffffc90000f377f0 EFLAGS: 00010246 RAX: ffff888112b1f2c0 RBX: ffff888112b1f2c0 RCX: ffff888112b1f320 RDX: 000000000000400b RSI: ffffffffc02c9de5 RDI: ffff888112b1f2c0 RBP: ffffc90000f37830 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90000f37610 R11: 617461203a736b6e R12: ffffea00044ac780 R13: ffff888100046400 R14: ffffffffc02c9de5 R15: 0000000000000006 FS: 00007f2f1cabe980(0000) GS:ffff88813b380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2f1c3acf75 CR3: 0000000111724000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body.cold+0x19/0x27 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x6a/0x90 ? kfree+0x2cf/0x2f0 ? exc_invalid_op+0x50/0x70 ? kfree+0x2cf/0x2f0 ? asm_exc_invalid_op+0x1a/0x20 ? ata_host_alloc+0xf5/0x120 [libata] ? ata_host_alloc+0xf5/0x120 [libata] ? kfree+0x2cf/0x2f0 ata_host_alloc+0xf5/0x120 [libata] ata_host_alloc_pinfo+0x14/0xa0 [libata] ahci_init_one+0x6c9/0xd20 [ahci] Ensure that we will not call kfree(host) twice, by performing the kfree() only if the devres_open_group() call failed. Fixes: dafd6c4 ("libata: ensure host is free'd on error exit paths") Cc: stable@vger.kernel.org Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20240629124210.181537-9-cassel@kernel.org Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Makes names consistent with schematic and correct polarity.
Signed-off-by: Norman James nkskjames@gmail.com