merge master from Azure/sonic-buildimage #6
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
…3851) Patch isc-dhcp-relay in order to allow the relay agent to discover configured interfaces even if they are down. Without this patch, the relay agent will not discover configured interfaces if they are down when the relay agent starts up. If the interface(s) then get brought up after the relay started, the relay will discard packets received on these interfaces and log the message, Discarding packet received on <iface_name> interface that has no IPv4 address assigned. This led to race conditions when starting SONiC (or loading configuration). To resolve this, the relay agent would need to be restarted with all configured interfaces up. With this patch, the relay agent will discover all configured interfaces, whether or not they are up at the time the relay agent starts. Thus, the state of the configured interfaces can be down when the relay agent starts and brought up during the lifetime of the relay agent process, and the relay agent will relay packets as expected; it will not discard them.
Fix the issue when an SFP module is plugged into a QSFP port via an adapter. - How I did it Originally the type of an SFP module is determined according to the SKU dictionary. However, it's possible that as SFP module is plugged into a QSFP port via an adapter. In this case, the EEPROM content will be parsed in the wrong format. To address that we fetch the identifier value of an xSFP module and then get the type by parsing it.
#3298) * ZTP infrastructure changes to support DHCP discovery provisioning data - Dynamically generate DHCP client configuration based on current ZTP state - Added support to request and process hostname when using DHCPv6 - Do not process graphservice url dhcp option if ZTP is enabled, ZTP service will process it - Generate /e/n/i file with all active interfaces seeking address assignment via DHCP. Only interfaces that are created in Linux will be added to /e/n/i. Also DHCP is started only on linked up in-band interfaces. Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com>
This common utility would set next boot option as onie mode and when reboot is triggered it would reboot the box into that specific onie mode. Current support modes are rescue/install/uninstall
In the scope of migration from docker shell plugin to docker connection plugin, we need to have docker-ce-cli installed in docker-sonic-mgmt. sonic-net/sonic-mgmt#1269 Added docker-ce-cli package to docker-sonic-mgmt.
sonic-net/sonic-platform-common#71 [Bug fix] fix a syntax error which was introduced by last commit sonic-net/sonic-platform-common#70 Fix EEPROM vendor extension TLV number counting issue sonic-net/sonic-platform-common#62 Platform Driver Development Framework (PDDF): 1) Changes to psu base class (1.0 APIs) to support PDDF CLI utils, 2) Adding fan_base class to support PDDF fan CLI utils (comments incorporated) sonic-net/sonic-platform-common#68 DeviceBase.get_name should raise NotImplementedError like other member
* [Mellanox]Update hw-mgmt to V7.0000.2308 sonic-linux-kernel should be updated accordingly with necessary patches uploaded. * [sub-module]Advance submodule head for sonic-linux-kernel
…to prevent prompt (#3879) * Change the dpkg default behavior in slave, and docker-base, in order to prevent prompt * Move to right place
As part of this commit, there are a few enhancements being made for EM policy implementation: a) Introduced hysteresis algorithm to prevent fan hunting b) Reading ASIC temperature to make decision for fan speed. As part of the PR# 3599, Workaround for the boot problem from secondary bios was addressed. When the SONiC image is upgraded, this resulted in creating multiple entries for BOOTX64.EFI. To fix the problem, as part of this changeset, introducing a check to see if there is already an UEFI entry for BOOTX64.EFI and accordingly creating / skipping the UEFI entry. Signed-off-by: Ciju Rajan K <crajank@juniper.net>
* lldpctl: put a lock around some commands to avoid race conditions * Read all notifications in lldpctl_recv * lib: fix memory leak * lib: fix memory leak when handling I/O * Update series
Updated the l2 preset config generator to specify 'admin_status': 'up' for every port by default. The use of setdefault() ensures that if port already has some admin_status set, the original value will not be overwritten. Signed-off-by: Mykola Faryma <mykolaf@mellanox.com>
We need to set min_mtu/max_mtu properly to support MTU setting torvalds/linux@61e84623 Signed-off-by: Wataru Ishida <ishida@nel-america.com>
In place editing (sed -i) seems having some issues with filesystem interaction. It could leave 0 size file or corrupted file behind. It would be safer to sed the file contents into a new file and switch new file with the old file. Signed-off-by: Ying Xie <ying.xie@microsoft.com>
…ned when warm reboot follows a hardware caused reboot (#3880) * [process-reboot-cause]Address the issue: Incorrect reboot cause returned when warm reboot follows a hardware caused reboot 1. check whether /proc/cmdline indicates warm/fast reboot. if yes the software reboot cause file will be treated as the reboot cause. finish 2. check whether platform api returns a reboot cause. if yes it is treated as the reboot cause. finish. 3. check whether /hosts/reboot-cause contains a cause. if yes it is treated as the cause otherwise return unknown. * [process-reboot-cause]Fix review comments * [process-reboot-cause]address comments 1. use "with" statement 2. update fast/warm reboot BOOT_ARG * [process-reboot-cause]address comments * refactor the code flow * Remove escape * Remove extra ':'
* Corefile uploader service 1) A service is added to watch /var/core and upload to Azure storage 2) The service is disabled on boot. One may enable explicitly. 3) The .rc file to be updated with acct credentials and http proxy to use. 4) If service is enabled with no credentials, it would sleep, with periodic log messages 5) For any update in .rc, the service has to be restarted to take effect. * Remove rw permission for .rc file for group & others. * Changes per review comments. Re-ordered .rc file per JSON.dump order. Added a script to enable partial update of .rc, which HWProxy would use to add acct key. * Azure storage upload requires python module futures, hence added it to install list. * Removed trailing spaces. * A mistake in name corrected. Copy the .rc updater script to /usr/bin.
remove afulnx_64 install script
If we need to stop swss during fast-reboot procedure on the boot up path, it means that something went wrong, like syncd/orchagent crashed already, we are stopping and restarting swss/syncd to re-initialize. In this case, we should proceed as if it is a cold reboot. Signed-off-by: Ying Xie <ying.xie@microsoft.com>
used overriding method instead of making changes in sfputilbase.py and changed the sff84xx to optoe driver for both QSFP and SFP.
…vice (#3690) * [platform/cel]: add fancontrol service support for dx010 * [device/celestica]: add hysteresis temp to dx010 fancontrol configuration
) Delay CPU intensive services at boot - How I did it Made snmp.timer work and add telemetry.timer. But this is not enough because it breaks the existing snmp dependency on swss. So, in this solution snmp timer is a wanted by swss service, but since OnBootSec timer expires only once it will not trigger snmp service, so I added line "OnUnitActiveSec=0 sec" which will start snmp service based on the last time it was active. On boot only OnBootSec will expire, on swss start/restarts only second timer will expire immediately and trigger snmp service. However, snmp service will not stop after "systemctl stop snmp" because of the second timer which will always expire when snmp service because unavailable. So there is a conflict which will be handled by systemd if we add "Conflicts=" line to both snmp.service and snmp.timer. So during boot: snmp does not start by default swss starts and starts snmp timer OnUnitActiveSec=0 does not expire since there is no snmp active OnBootSec expires and starts snmp service and snmp timer gets stopped During "systemctl restart swss" snmp stops because of Requisite on swss snmp unblocks snmp timer from running swss starts and starts snmp timer OnUnitActiveSec=0 expires imidiately and start snmp which stops snmp timer During "systemctl stop snmp" stop of snmp service unblocks snmp timer but no one starts the timer so it is not started by "OnUnitActiveSec=0"
Signed-off-by: Volodymyr Samotiy <volodymyrs@mellanox.com>
…rs. (#3885) Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
There is no ledd in qfx5210 platform. This patch skip starting ledd in pmon container. This also will help in fixing the pmon container not getting started if there is no ledd running. Signed-off-by: Ciju Rajan K <crajank@juniper.net>
9f6efa0 [port/buffer] introduce a sync mechanism to protect port PG/queue from changes under PFC storm (#1143) 823e426 [aclorch] Enable DSCP rules on IPv6 mirror tables (#1146) b8745f8 [bitmap_vnet]: Fix removal flow for tunnel route (#1139) 03be983 Increase ip2me CIR/CBR for faster in-band file transfers (#1000) a4a1d3b [vnet]: Update VNET route table size to 40K for BITMAP implementation (#1132) efe142a Fix bug: Wrong condition for mac address (#1142) 7bf63a0 [teammgrd]during warm-reboot teamd need to recover system-id from saved lacp-pdu (#1003) 8b4cfb6 Cleanup configure.ac from BFN specific code (#1133) b931751 [teamsyncd]: Add retry logic in teamsyncd to avoid team handler init failure (#854) Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
Signed-off-by: Guohan Lu <gulv@microsoft.com>
* Updates per review comments 1) core_uploader service waits for syslog.service 2) core_uploader service enabled for restart on failure 3) Use mtime instead of file size + ample time to be robust. * Avoid reloading already uploaded file, by marking the names with a prefix. * Updated failing path. 1) If rc file is missing or required data missing, it periodically logs error in forever loop. 2) If upload fails, retry every hour with a error log, forever. * Fix few bugs * The binary update_json.py will come from sonic-utilities.
Adding buffers.json.j2, buffers_defaults_t1.j2 and qos.json.j2 for qfx5210 platform. Signed-off-by: Ciju Rajan K <crajank@juniper.net>
…lable on system (#3875)
…#3958) * [docker-base-stretch]: Do not check expire for stretch-backports repo Signed-off-by: Guohan Lu <gulv@microsoft.com>
… and use new DBConnector (#3928) * [MultiDB]except src and dockers : replace redis-cli with sonic-db-cli and use new DBConnector * fix vs tests along with swss vs tests together
* Implement path traversal just once * Add support of vrf to bgpcfgd
Packaging libnl 3.5.0 based off libnl 3.2.27 packaging. libnl contains various bug fixes that are nice to have. pull-request: #3967 signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
* [Mellanox/hw-mgmt] Update the hw-mgmt patch for simx on V.7.0000.2308 * removing the extra "[PATCH]"
… files (#3973) This is an addendum to #3958, which also instructs apt to ignore the "Valid Until" date in Release files inside the slave containers, making a complete solution, much like the previously abandoned PR #2609. This patch also unifies file names and contents. When the Debian team archives a repo, it stops updating the "Valid Until" date, thus apt-get will not apply updates for that repo unless we explicitly tell it to ignore the "Valid Until" date. Also, this has become an issue with active (i.e., non-archived) repos twice in the past year because the Debian folks seem to occasionally let the expiration lapse before updating the date. This will cause SONiC builds to fail with a message like E: Release file for http://debian-archive.trafficmanager.net/debian-security/dists/jessie/updates/InRelease is expired (invalid since 3d 3h 11min 20s). Updates for this repository will not be applied. until the dates have been updated and propagated to all mirrors. With this patch, SONiC should no longer be affected by lapsed "Valid Until" dates, whether they be accidental or purposeful.
DHCP relay MONitor (dhcpmon) keeps track of DORA messages. If DHCP Relay is detected to be not forwarding DORA message, dhcpmon will log such event to syslog. Under the hood dhcpmon keeps counts of clients DR messages, forwarded DR messages, DHCP server OA messages, and forwarded OA messages. dhcpmon will check every 12 sec (configurable) if counts are monotonically increasing and record snapshot of those counters. dhcpmon will report discrepancies when detected between current counters and snapshot counters. pull-request: #3886 signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
* Install python-subnettree to sonic-mgmt container.
…ection is stable (#4003)
* [device/celestica]: add pmon_daemon_control config * [device/celestica]: update sfp index follow port_config * [device/celestica]: update get_watchdog to avoid multiple daemon try opening watchdog
Otherwise, build process gets stuck because isc-dhcp-relay gives promt: ``` $ make SONIC_PROFILING_ON=y INSTALL_DEBUG_TOOLS=y SONIC_BUILD_JOBS=12 target/debs/stretch/isc-dhcp-relay_4.3.5-2_amd64.deb-install +++ --- Making target/debs/stretch/isc-dhcp-relay_4.3.5-2_amd64.deb-install --- +++ EXTRA_JESSIE_TARGETS=isc-dhcp-relay_4.3.5-2_amd64.deb-install make -f Makefile.work jessie make[1]: Entering directory `/build2/stepanb/hitless/sonic-buildimage' SONiC Build System Build Configuration "CONFIGURED_PLATFORM" : "mellanox" "CONFIGURED_ARCH" : "amd64" "SONIC_CONFIG_PRINT_DEPENDENCIES" : "" "SONIC_BUILD_JOBS" : "12" "SONIC_CONFIG_MAKE_JOBS" : "12" "SONIC_USE_DOCKER_BUILDKIT" : "" "USERNAME" : "admin" "PASSWORD" : "YourPaSsWoRd" "ENABLE_DHCP_GRAPH_SERVICE" : "" "SHUTDOWN_BGP_ON_START" : "" "ENABLE_PFCWD_ON_START" : "" "INSTALL_DEBUG_TOOLS" : "" "ROUTING_STACK" : "frr" "FRR_USER_UID" : "300" "FRR_USER_GID" : "300" "ENABLE_SYNCD_RPC" : "" "ENABLE_ORGANIZATION_EXTENSIONS" : "y" "HTTP_PROXY" : "" "HTTPS_PROXY" : "" "ENABLE_SYSTEM_TELEMETRY" : "y" "ENABLE_ZTP" : "" "SONIC_DEBUGGING_ON" : "" "SONIC_PROFILING_ON" : "" "KERNEL_PROCURE_METHOD" : "build" "BUILD_TIMESTAMP" : "20200106.124851" "BLDENV" : "" "VS_PREPARE_MEM" : "yes" "ENABLE_SFLOW" : "y" make: Nothing to be done for 'jessie'. make[1]: Leaving directory `/build2/stepanb/hitless/sonic-buildimage' BLDENV=stretch make -f Makefile.work target/debs/stretch/isc-dhcp-relay_4.3.5-2_amd64.deb-install make[1]: Entering directory `/build2/stepanb/hitless/sonic-buildimage' SONiC Build System Build Configuration "CONFIGURED_PLATFORM" : "mellanox" "CONFIGURED_ARCH" : "amd64" "SONIC_CONFIG_PRINT_DEPENDENCIES" : "" "SONIC_BUILD_JOBS" : "12" "SONIC_CONFIG_MAKE_JOBS" : "12" "SONIC_USE_DOCKER_BUILDKIT" : "" "USERNAME" : "admin" "PASSWORD" : "YourPaSsWoRd" "ENABLE_DHCP_GRAPH_SERVICE" : "" "SHUTDOWN_BGP_ON_START" : "" "ENABLE_PFCWD_ON_START" : "" "INSTALL_DEBUG_TOOLS" : "" "ROUTING_STACK" : "frr" "FRR_USER_UID" : "300" "FRR_USER_GID" : "300" "ENABLE_SYNCD_RPC" : "" "ENABLE_ORGANIZATION_EXTENSIONS" : "y" "HTTP_PROXY" : "" "HTTPS_PROXY" : "" "ENABLE_SYSTEM_TELEMETRY" : "y" "ENABLE_ZTP" : "" "SONIC_DEBUGGING_ON" : "" "SONIC_PROFILING_ON" : "" "KERNEL_PROCURE_METHOD" : "build" "BUILD_TIMESTAMP" : "20200106.124855" "BLDENV" : "stretch" "VS_PREPARE_MEM" : "yes" "ENABLE_SFLOW" : "y" [ 01 ] [ target/debs/stretch/isc-dhcp-relay_4.3.5-2_amd64.deb-install ] Servers the DHCP relay should forward requests to: Interfaces the DHCP relay should listen on: ``` Signed-off-by: Stepan Blyschak <stepanb@mellanox.com>
Updated SDK package with X1/X2 profiles Signed-off-by: Andriy Kokhan <akokhan@barefootnetworks.com>
…3974) * [Monit] Change the monitoring period of monit from 120 seconds to 60 seconds and also at the same time double the interval for existing sonic monit config file in host. Signed-off-by: Yong Zhao <yozhao@microsoft.com>
When database service is down, psud daemon throws an error because of DB connection reset, this because pmon service has no dependency with database service. To resolve this issue, added database service dependency to the pmon service. Also, increased the net.core.somaxconn value to 512 to solve the connection failure on the scaled setup.
…status running in various SONiC containers. (#3940) * Add a monit config file for teamd container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a copy mechanism to put the monit config file in teamd container into base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a monit config file for snmp container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a copy mechanism to put the monit config file of snmp container into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a monit config file for dhcp_relay container in the dir base_image_files. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a copy mechanism to put the monit config file of dhcp_relay container into base image under /etc/monit/conf.d. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a monit config file for router advertiser container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * Add a copy mechanism to put the monit config file of router advertiser contianer into base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-Pmon] Add a monit config file for pmon container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-Pmon] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-lldp] Add a monit config file for lldp container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-lldp] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-bgp] Add a monit config file for BGP container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-bgp] Add a copy mechanism to put monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-swss] Add a monit config file for the swss container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-swss] Add a copy mechanism to put monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on barefoot platform. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image on barefoot. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on broadcom. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image on broadcom. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on cavium. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-centec] Add a monit config file for syncd container on centen platform. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on centen platform. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on marvell. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit conifg file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on marvell-arm64. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image on marvell-arm64. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on marvell-armhf. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on mellanox. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a monit config file for syncd container on nephos. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-sflow] Add a monit config file for sflow container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-sflow] Add a copy mechanism to put the monit conifg file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-telemetry] Add a monit config file for telemetry container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-telemetry] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-database] Add a monit config file for database container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-database] Add a copy mechanism to put the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-Dhcprelay] Change a typo. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-Dhcprelay] Change the process name in monit config file to dhcrelay. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] There is no desserve process in syncd container on barefoot. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] There is no process desserve in syncd container on cavium. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] There is no process named desserve in syncd on centec. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] There is no process named desserve in syncd on marvell. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Should not delete the process desserve in syncd container on marvell. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Delete the process dsserve in syncd on marvell. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Delete the process dsserve in syncd container on marvell-arm64. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Delete the process dsserve in syncd container on marvell-armhf. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Delete the process dsserve in syncd container on mellanox. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-Radv] Change the process name to radvd. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-telemetry] Correct a typo in monit_telemetry. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-teamd] Delete the monit config file for teamd. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-teamd] Delete the mechanism to copy the monit config file into base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-dhcprelay] Delete the monit config file for dhcp_relay container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-dhcprelay] Delete the mechanism to copy the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-radv] Delete the monit config file foe radv container. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-radv] Delete the mechanism to copy the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-bgp] change the monit config file for BGP container such that monit only generates alert if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-snmp] Change the monit config file for snmp container such that monit only generates alret if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-pmon] Change the monit config file for pmon container such that monit only generates alert if the processes are not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-lldp] Change the monit config file for lldp container such that monit only generates alerts if some processes are not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-pmon] Delete the monit config file for pmon container since some of processes are not running depended on the type of box. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-pmon] Delete the copy mechanism to copy the monit config file into the base image. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-lldp] Change the matching name for the process lldpd. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-swss] Change the monit config file for swss container such that monit only generates alerts if the processes are not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on barefoot such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Correct a typo in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on broadcom such that monit only generates alerts if the processes are not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on cavium such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on marvell such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on marvell-arm64 such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on marvell-armhf such that monit will generate alert if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Change the monit config file for syncd container on mellanox such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-sycnd] Change the monit config file for syncd container such that monit only generates alerts if the processes are not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-sflow] Change the monit config file for sflow container such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-telemetry] Change the monit config file for telemetry container such that monit only generates alerts if the processes are not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-database] Change the monit config file for database container such that monit only generates alerts if the process is not running for 5 minutes. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-database] Use 4 spaces to replace 2 spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-bgp] Use 4 spcess to replace 2 spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-lldp] Use 4 spaces to replace 2 spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-swss] Use 4 spaces to replace 2 space in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-sflow] Use 4 spaces to replace 2 spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-snmp] Use 4 spaces to replace 2 spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-telemetry] Use 4 spaces to replace 2 spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file on barefoot. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file on broadcom. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file on cavium. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file on centec. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file on marvell. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to replace 2 spaces in the monit config file on mellanox. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-syncd] Use 4 spaces to repalce 2 spaces in the monit config file on nephos. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [Docker-bgp] Remove the trailing extra spaces in monit config file. Signed-off-by: Yong Zhao <yozhao@microsoft.com>
guxianghong
pushed a commit
that referenced
this pull request
Dec 12, 2020
This update brings in the following commits. 86c1108 Enable arm architecture to build in addition to amd64 (sonic-net#37) 4acb2c3 fix bugs and enhance Transformer (sonic-net#35) 49e5a22 ygot related enhancements and fixes (sonic-net#34) 51224de Fix ietf yang search path for cvl schema builds (sonic-net#32) 3c6cdb3 CVL Changes #8: 'must' and 'when' expression evaluation (sonic-net#31) dabf231 CVL Changes #7: 'leafref' evaluation (sonic-net#28) 6f9535f CVL Changes #6: Customized Xpath Engine integration (sonic-net#27) 5e2466b DB-Layer fixes/enhancements (sonic-net#26) 9a27302 CVL Changes #4: Implementation of new CVL APIs (sonic-net#22) dbf1093 Translib support for authorization, yang versioning and Delete flag (sonic-net#21) 80f369e CVL Changes #5: YParser enhancement (sonic-net#23) 904ce18 CVL Changes #3: Multi-db instance support (sonic-net#20) 9d24a34 CVL Changes #2: YValidator infra changes for evaluating xpath expression (sonic-net#19) f3fc40f CVL Changes #1: Initial CVL code reorganization and common infra changes (sonic-net#18) 4922601 Bulk and RPC API support in translib (sonic-net#16) 1d730df RFC7895 yang module library implementation (sonic-net#15)
AlanYoush
pushed a commit
that referenced
this pull request
Aug 23, 2023
…sonic-net#15634) #### Why I did it src/dhcpmon ``` * 824a144 - (HEAD -> master, origin/master, origin/HEAD) replace atoi with strtol (#6) (3 hours ago) [Mai Bui] * 32c0c3f - Fix libswsscommon package installation for non-amd64 (#7) (6 hours ago) [Saikrishna Arcot] ``` #### How I did it #### How to verify it #### Description for the changelog
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
- What I did
- How I did it
- How to verify it
- Description for the changelog
- A picture of a cute animal (not mandatory but encouraged)