01 Oct 19:32

Koenkk

e06848d

1.40.2 Latest

Latest

Improvements

#8049 Add current level startup to all IKEA TRADFRI lights (@dannyneup)
#8031 Improve multi-endpoint support for lights (@mundschenk-at)
#8040 Improvements for tint (Mueller Licht) (@FernetMenta)
#8011 Improve support for the SUTON STB3L-125-ZJ DIN rail RCBO (TZE204_wbhaespm) (@octa22)
#7895 OWON PC 321 - support clear measurement data (@Lacrymal3)
#1200 ZBOSS: group and broadcast requests (@kirovilya)
#1194 Standardize ZDO (@Nerivec)
#1187 Prepare to move specific ZDO requests out of Adapter (@Nerivec)

Fixes

#23601 Enforce TS strict type checking (@Nerivec)
#24045 Fix Home Assistant Invalid state message error when state is too long (@Koenkk)
#23893 Improve performance when logging is disabled (@tomer-w)
#24090 Fix incorrect logging when value is not in Tuya lookup (@Koenkk)
#21738 Fix Tuya ZY-M100-24GV2 integration (@Koenkk)
#24049 Fix Tuya ZY-M100-24GV3 move/presenence sentivity range (@Koenkk)
#24091 Mark GL-C-003P as color temp only (instead of color) (@Koenkk)
#8041 Fix Lumi pet feeder LED indicator control (@impankratov)
#8048 Fix scaling ignored when precision is specified in a modernExtend.numeric (@morgendagen)
#8024 Fix vendor naming resulting in duplicate vendors (@MarkusPalm)
#24081 Log Lumi Unhandled key as debug (@Koenkk)
#8018 Expose toggle command for SONOFF ZBMINIR2 (@Koenkk)
#8005 Improve _TZE204_aoclfnxz integration (@Dukobpa3)
#7567 Fix _TZ3210_mja6r5ix not controllable (@diegocjorge)
#8017 Fix _TZE204_m1wl5fvq not being detected as supported (@ab3al91)
#8004 Fix battery reporting for Tuya _TZ3210_up3pngle (@marcelhoogantink)
#24013 Fix configure failing for ZG-101ZL (@Koenkk)
#23993 Fix custom cluster missing in configure (@Koenkk)
#24074 Fix power source unknown for some lights and switches (@Koenkk)
#8007 Add custom cluster for Perenio PEHPL0X (@Stonos)
#24007 Fix power source unknown for all battery powered devices (@Koenkk)
#8003 Fix power source unknown for Sonoff plugs SA-028/SA-09 (@kbullet)
#8002 Hint for required firmware for auto close valve in SONOFF SWV (@N3rdix)
#23825 Send transition when IKEA bulb is turned OFF when not already OFF (@Koenkk)
#7992 Add status shutter for Legrand 067776 (@apages2)
#23979 Fix Tuya _TZE204_lzriup1j working_day (@Koenkk)
#7993 Fixes in ptvo.switch converter (@ptvoinfo)
#7995 TO-Q-SY2-163JZT unable to set over voltage higher than 255 (@iaxon)
#7986 Increase poll interval of Livolo TI0001-hygrometer and TI0001-pir to 300 seconds (@PaulVanSchayck)
#7982 Rename AEOTEC -> Aeotec (@chris-1243)
#7981 Rename ubisys -> Ubisys and update converters for C4 (@chris-1243)
#7983 Update Danfoss 014G2461 external_measured_room_sensor description (@magicus)
#7966 Fix preset value for Tuya ZWT198/ZWT100-BH (@friyin)
#23918 Fix SLZB-06p7 configure failing (@Koenkk)
#23887 Fix Tuya energy polling not working when measurement interval is set to "" (@Koenkk)
#7972 Fix Ubisys C4 integration (@chris-1243)
#7961 Migrate to eslint 9 (@Koenkk)
#23911 Fix remove unsupported color from Innr RB 178 T (@Koenkk)
#7959 Fix S1-R (5601) fingerprint (@lgraf)
#7953 Fix Tuya-RB-SRAIN01 cleaning_reminder value (@marcelhoogantink)
#7965 Improve compatibility with _TZ3000_303avxxt DIN rail switch (@octa22)
#7963 Improve compatibility with _TZ3000_zjchz7pd DIN rail switch (@octa22)
#1207 Fix unable to join some devices with Conbee III (@schrluka)
#1209 Fix crash on IEEE address request timeout (@Koenkk)
#1206 On NO_ENTRY error during unbind cleanup database (@sjorge)
#1201 Cleanup network address change code (@Nerivec)
#1190 Fix always use number for reportableChange (@Koenkk)
#1181 Add missing response ID to view command (@canardos)
#3363 Fix Error: CommandID '159' from subsystem '5' not found (@Koenkk)
#1182 Fix two docs typos in device.ts (@deviantintegral)
#1133 Use BuffaloZdo in ZStackAdapter (@Koenkk)
#1186 ZDO spec: improve build/read logic and typing (@Nerivec)

Frontend

New supported devices

This release adds support for 29 devices:

#8043 FP1E Aqara Presence sensor (@morgendagen)
#8055 ZPIR-10 Tuya Treatlife human presence sensor (@benedicttobias)
#8050 ZBEK-32 ADEO ENKI Inspire Extraflat D12 (@legantois)
#8037 929003823001 Philips Hue Tento white ambiance 29,1cm (@lgraf)
#8037 929003823601 Philips Hue Tento color 29,1cm (@lgraf)
#8033 SPM01V2.5 Tuya Smart energy monitor for 1P+N system (@script0803)
#8033 SPM02V2.5 Tuya Smart energy monitor for 3P+N system (@script0803)
#8033 SPM02V3 Tuya Smart energy monitor for 3P+N system (@script0803)
#8033 SDM01V1.5 Tuya Smart energy monitor for 3P+N system (@script0803)
#8033 SDM02V1 Tuya Smart energy monitor for 2P+N system (@script0803)
#8030 TGM50-ZB Tuya Beok wall thermostat (@kasperiio)
#8029 TRV07 Avatto Thermostatic radiator valve (@petepal)
#8021 CSAC451-WTC-E CASAIA Dry contact relay switch module in 6-24v AC (@Albenss)
#8013 371050043 Paulmann Solar LED house number light (@AndyDorn)
#8015 C201 Candeo Zigbee micro smart dimmer (@MarkusPalm)
[#8016](https://github.com/Koe...

Contributors

Stonos, basdp, and 57 other contributors

Assets 2

1 Join discussion

07 Sep 11:26

Koenkk

1.40.1

403d3c0

1.40.1

Notes

This hotfix release primarily addresses the Cannot read properties of undefined (reading 'some') error (#23821)

Improvements

#7898 Support inching feature for various Tuya TS000X devices and cleanup definitions (@guidugli)

Fixes

#23821 Fix Cannot read properties of undefined (reading 'some') (@Koenkk)
#23798 Log stack trace when update check fails (@Koenkk)
#23863 Fix Invalid Version error when controlling TRADFRI light (@Koenkk)
#7948 Fix on_off_countdown when payload had no state (@Koenkk)
#19665 Fix state and position access of various Tuya covers (@Koenkk)
#23187 Fix Zemismart ZMR4 integration (@Koenkk)
#7946 Tuya RB-SRAIN01: change 'water-leak' to 'rain'; remove 'battery_low' and 'tamper' (@marcelhoogantink)
#23825 Don't ignore off transition for TRADFRI bulbs with firmware 1.0.021 (@Koenkk)
#7831 Fix electricityMeter modern extend showing disabled exposes (@Koenkk)
#22687 Fix Ledvance OTA failing with AssertionError [ERR_ASSERTION]: Size mismatch (@Koenkk)
#7944 Inovelli blue switches min/max modification (@knaackville)
#23815 Add rain_intensity unit to Tuya RB-SRAIN01 (@Koenkk)
#7930 Add three phase support for modernExted electricityMeter (@taraldb)
#7931 Add water leak expose to Tuya RB-SRAIN01 (@rdorys)
#1176 Use Map for runtime Device/Group lookups (@Nerivec)
#1175 Fix Deconz Green power implementation (@Koenkk)
#1174 ZBOSS: fixed logging and uart packet handling (@kirovilya)

New supported devices

This release adds support for 14 devices:

#7947 501.40 Paulmann RGB remote control (@Hykario)
#7915 S1-R-2 ubisys Power switch S1-R (Series 2) (@lgraf)
#7941 929003736201 Philips Hue White and Color Ambiance Datura Ceiling light small (@coendaar)
#23854 RF 262 Innr E27 smart filament LED light bulb (@Koenkk)
#7940 SSKT11IW-F1 Feibit Power plug (@snksos)
#7932 TS0601_din_4 Tuya Din rail switch with power monitoring and threshold settings (@rfcdejong)
#7936 ZA03 Tuya Siren alarm (@amessers)
#7925 1811680 SOMFY Zigbee opening sensor (@ngraziano)
#7925 1811681 SOMFY Zigbee motion sensor (@ngraziano)
#7899 4099854295232 LEDVANCE SMART+ indoor plug EU with energy meter (@dhanukapulkit)
#7899 4099854293276 LEDVANCE SMART+ Compact outdoor plug EU with energy meter (@dhanukapulkit)
#7928 SQM300Z1 ShinaSystem SiHAS big button switch 1 gang (@shinasys)
#7928 SQM300Z2 ShinaSystem SiHAS big button switch 2 gang (@shinasys)
#7928 SQM300Z3 ShinaSystem SiHAS big button switch 3 gang (@shinasys)

Fixed device detections

#7943 Detect _TZB210_ayx58ft5 as MiBoxer E2-ZR #23379 (@pvyleta)
#7935 Detect _TZE200_7ytb3h8u as GiEX GX02 (@idogrf)
#23826 Detect HOMA1022 as HLD503-Z-CT (@mullahomes2012)

Contributors

ngraziano, lgraf, and 18 other contributors

Assets 2

01 Sep 18:13

Koenkk

1.40.0

6fa1dab

1.40.0

Notes

For TI ZStack users: a new firmware has been released, 20240710. This firmware improves reliability and improves performance. To determine what firmware is compatible with your adapter, see the docs.
Experimental support for ZBOSS adapters has been added.
For external extensions (not converters!): the emitDeviceRemoved event has been renamed to emitEntityRemoved.

Improvements

#23747 Add support for zboss adapter (@kirovilya)
#7913 Support genBinaryOutput and genBinaryInput in definition generator (@tomaszduda23)
#7891 Support auto_close_when_water_shortage for SONOFF SWV (@liubotongs)
#7877 Enable on/off countdown for AutomatOn AUT000069 (@sixtysecrun)
#7817 Make Lupus 12126 and 12127 OTA capable (@cromefire)
#1165 ZBOSS adapter for nRF ZBOSS NCP (@kirovilya)
#1146 Enforce TS strict type checking and other improvements (@Nerivec)

Fixes

#23703 Add logging when loading external converters (@Koenkk)
#23503 Add min/max for some adapter options (@Koenkk)
#23578 Add OCI labels to image (@klaernie)
#23494 Fix expose category ignored by HA discovery (@Koenkk)
#23541 Improve looping performance (@Nerivec)
#23492 Remove group from Home Assistant when removed (@LaurentvdBos)
#23566 Set zigbee-herdsman transmit power through settings on startup (@Koenkk)
#23757 Update watchdog delays (@Koenkk)
#7919 Changed enum to numeric expose for counters in 'ptvo_counter_2ch' device (@kirovilya)
#23776 Fix configure failing for SONOFF ZBMINI-L and ZBMINIL2 (@Koenkk)
#23741 Add unit for OWON PC321 power factor (@Koenkk)
#19665 Fix state for some Tuya covers not updating (@Koenkk)
#7907 Standarize namron smart plugs (@taraldb)
#2966 Add missing actions to 404049D (@kaiseracm)
#23694 Fix 3RDTS01056Z power source (@Koenkk)
#7896 Fix some commands send to wrong endpoint when using modernExtend (@Koenkk)
#7889 Support endpoint for window covering modernExtend (@Koenkk)
#7887 Adjust battery % calculation for CSM-300ZB_V2 (@shinasys)
#7885 Rename Owon to OWON (@diemade)
#7875 Add "off" system mode to Vimar 02973.B (@saveriol)
#7866 Fix IKEA E2013 contact not updating (@baierjan)
#7865 Fix IKEA E2202 not reporting water leak (@baierjan)
#18603 Fix negative readings for several Tuya TS0601 power meters (@Koenkk)
#7871 Fixes for ELKO Super TR + ctm_thermostat (@chdefrene)
#7864 Ignore identify cluster for definition generator (@Koenkk)
#7860 Improve Gledopto GL-D-013P support (@marthubner)
#7872 Update Gledopto Pro LED controllers to standard light ModernExtend (@marthubner)
#2936 Fix Lonsonho QS-Zigbee-C01 calibration_time (@Koenkk)
#23496 Fix illuminance value incorect for Tuya ZG-205Z/A (@Koenkk)
#22030 Fix some IKEA lights turning ON when receiving OFF if already OFF (@Koenkk)
#23534 Fix Ledvance/OSRAM/Sylvania OTA broken for some models (@Koenkk)
#23582 Fix Tuya ZY-M100-24GV2 sensitivity divided by 10 (@Koenkk)
#7781 Add back TS110E_1gang_1 (@marthubner)
#23485 Allow toZigbee converter to match on any key (@Koenkk)
#7839 Convert ELKO 4523430 to use modern extend syntax (@chdefrene)
#7829 Fix electricity meter exposes of AEOTEC ZGA003 (@vilaemail)
#23522 Remove unsupported battery_low from SONOFF SNZB-03P (@Koenkk)
#7827 Add read-write interfaces for private cluster in 3RSNL02043Z (@llhappier)
#23519 Fix battery % multiplied by 2 for ROBB ROB_200-009-0 (@Koenkk)
#7814 Fix configure failing for some Hue light which support gradient (@LaurentvdBos)
#7816 Fix Tuya TS0601_soil_2 datapoint mappings (@rare-magma)
#7822 Inovelli - Adding custom device specific cluster to converter (@InovelliUSA)
#23462 Remove unsupported color_xy from Sengled Z01-A19NAE26 (@Koenkk)
#7818 Update Aqara WS-EUK03 power measurement (@priitliivak)
#1166 Remove heimanSpecificFormaldehydeMeasurement in favour of msFormaldehyde (@smartboxchannel)
#1170 Zigate: parse all values as big endian (@devbis)
#1153 Ember: fix CCA issues in busy environments (broadcast errors) (@Nerivec)
#1151 Ember: fix GP proxied messages handling (@Nerivec)
#1144 Improve bind/unbind logic (@Nerivec)
#1150 Support install code format with pipe delimiter (@yoo)
#1139 Allow to set adapter transmit power on startup (@Koenkk)
#1134 Call fsync before rename (@LaurentvdBos)
#1138 Move Deconz change network paramters to start from getNetworkParameters (@Koenkk)

Frontend

New supported devices

This release adds support for 38 devices:

#7914 THE01860A Tuya Soil sensor with illuminance (@Burki24)
#7889 TSKT106W-M1 Feibit Portable Smart Socket (@snksos)
#7889 SZSN325W-Q Feibit Three-Gang Scene Switch (@snksos)
#7889 NZRC106W-M2 Feibit Security Remote (@snksos)
#7889 SZT211_AW-P1 Feibit Curtain Motor (@snksos)
#7889 SSS401ZB-T Feibit Temperature control panel (@snksos)
#7889 TZSC302W-V1 Feibit Dimmer Switch (@snksos)
#7889 TSKT222W-H4 Feibit Power Socket with Metering (@snksos)
#7889 TCUR218W-V1 Feibit Dual Track Curtain Panel (@snksos)
#7912 VC-X01D Aqara Valve controller T1 (@kirovilya)
#7908 ZG-103Z Tuya Vibration sensor (@13717033460)
#7909 ZY-M100-24GV3 Tuya 24G MmWave radar human presence motion sensor（added distance switch） (@yuanxin32323)
...

Contributors

diemade, shadowpanther, and 57 other contributors

Assets 2

01 Aug 18:51

Koenkk

1.39.1

e132316

1.39.1

Notes

This release introduces the ability to change the Zigbee channel of an existing network when using the zstack adapter. Note that this functionality was already available for the ember adapter in previous releases. (docs)

Improvements

#7764 Ubisys H1 open window support (@sjorge)
#7733 Make 6735/6736/6737 state poll interval configurable and default to 60 seconds (@Koenkk)
#7743 Support silene for Tuya PA-44Z (@Koenkk)
#7716 Expose deviceRunTime for STARKVIND air purifier (@indrajitr)
#1117 Add serialNumber to genBasic cluster (@turboproc)
#1116 Add pm1Measurement and pm10Measurement clusters, update pm25Measurement (@turboproc)
#1110 Support channel change for z-stack (@Koenkk)
#1096 Inovelli Adding P26 For VZM36 (@InovelliUSA)
#1106 Ember: Implement requests concurrency (@Nerivec)
#1094 Ember: Support for EmberZNet v8.0.0 (@Nerivec)

Fixes

#23075 Allow definition to override HA discovery payload (@gpayer)
#23316 Fix availability blocking other extensions startup (@Koenkk)
#23412 Fix race condition in frontend extension (@Koenkk)
#23269 Fix syslog output (@Nerivec)
#23328 Ignore cache when re-interviewing device (@Koenkk)
#23405 Improve looping when retrieving all devices from herdsman (@Nerivec)
#23199 Truncate text of Home Assistant text sensor (@Koenkk)
#19803 Fix illuminance multiplied by 100 for Tuya ZG-205Z/A (@Koenkk)
#7809 Fix manuSpecificUbisysDimmerSetup cluster ID (@sjorge)
#22421 Fix configure failing for Tuya TS0205 (@Koenkk)
#7800 Fix no occupancy for WB-MSW-ZIGBEE v.4 (@BurchuMikhail)
#7810 Fix no converter available errors for Tuya TOQCB2-80 (@bifi2090)
#630 Increase max Tuya BLE-YL01 ec_max value (@Koenkk)
#7805 LumiOutageCountRestoreBindReporting sometimes stuck (@sjorge)
#23419 Support endpointNames for electricityMeter (@Koenkk)
#7793 Add quadruple to Aqara WXKG13LM (@TeHashX)
#7786 Add typing for battery voltage (@Nerivec)
#22492 Fix configure of HESZB-120 failing with Ember (@Koenkk)
#22416 Fix duplicate actions for various Tuya TS004X devices (@Koenkk)
#23362 Fix Tuya TS0601_smart_air_house_keeper voc unit (@Koenkk)
#7774 Fix wrong vendor name and model for _TZE204_ztqnh5cg (@Burki24)
#7772 Sonoff TRV: move superfluous entities from sensors device category (@blacknell)
#7711 Migrate more to modernExtend for Develco devices (@sjorge)
#23336 Rename TB26-1 to TB26-3 (@Koenkk)
#21357 Fix getFromLookup when retrieved value is null (@Koenkk)
#23056 Fix Lumi ZNJLBL01LM position incorrect when device restarts (@Koenkk)
#7757 Fix missing color command for ZG2858A (@adescamps)
#7745 Fix AEOTEC ZGA002 state, voltage, power, current and energy postfix (@lgraf)
#6509 Fix Lidl FB20-002 not sending on action after triggering it once (@Koenkk)
#7681 Ignore reported battery % if battery % is computed from voltage (@deviantintegral)
#7753 ZigbeeTLc: Adjust parameter scaling to ZigbeeTLc firmware v1.2.2 (@robvanoostenrijk)
#7727 Add noise_level for Livolo TI0001-illuminance (@PaulVanSchayck)
#7726 Fix all channel trigger simultaneously for Zemismart ZMO-606-S2 (@fabergoncalves)
#519 Fix Home Assistant discovery for various switches (@Koenkk)
#7738 Fix TS130F calibration_time access (@murtas)
#7736 Fix ZigDC inputs action (@xyzroe)
#22809 Fix configure failing for various LifeControl MCLH-0X devices (@Koenkk)
#7725 Improve battery % calculation for Tuya TS0203 and WSD500A (@deviantintegral)
#7565 Change S8 vendor to SODA (@Koenkk)
#23227 Disable unsupported Hue effects for Philips 3216331P5 (@Koenkk)
#7720 Fix Bosch BTH-RA Home Assistant discovery (@Koenkk)
#7715 Fix Bosch BWA-1 water_leak returns null (@burmistrzak)
#23155 Fix electrical measurements for Tuya _TZ3000_x3ewpzyr not working (@Koenkk)
#7723 Recategorize configurable attributes for Inovelli (@indrajitr)
#1128 ZStack: throw errors when ZDO calls fail (@Koenkk)
#1130 Improve loops performance (@Nerivec)
#1125 ZStack: throw error when bind/unbind fails (@Koenkk)
#1121 Ember: Add keys to adapter queue executors (@Nerivec)
#1118 Ember: Fix launch bootloader command (@Nerivec)
#1119 Fix no checkinInterval after restart if device has no genPollCtl cluster (@sjorge)
#1114 Add IEEE -> NWK Addr translation on RX for Conbee 3 (@schrluka)
#1109 Allow to ignore cache for device interview (@Koenkk)
#1108 Ember: Always set TRUST_CENTER_ADDRESS_CACHE_SIZE (@Nerivec)

Frontend

ad2784f ignore en translation from poeeditor (#2085) (@Koenkk)
48568dd display hexadecimal and decimal values for network addresses (#2078) (@Nerivec)

New supported devices

This release adds support for 39 devices:

#7798 CSP043 ClickSmart+ 1 gang switch module with neutral wire (@matthewsmithy)
#7798 CSP051 ClickSmart+ 1 gang smart dimmer switch module without neutral (@matthewsmithy)
#7812 NAS-WV05B2-L NEO Smart sprinkler timer (@baggiowu)
#7812 NAS-WV05B2 NEO Smart sprinkler timer (@baggiowu)
#7812 NAS-STH02B2 NEO Soil moisture, temperature, and ec (@baggiowu)
#23442 SLZB-06 SMLIGHT Router (@Koenkk)
#7804 TS0502C Immax Neo FINO Smart pendant li...

Contributors

bjornbak, indrajitr, and 51 other contributors

Assets 2

11 Join discussion

01 Jul 18:26

Koenkk

1.39.0

0326926

1.39.0

Improvements

#22859 Allow hierarchical filtering of logger namespaces (@ghoz)
#7694 Add support for leading/trailing edge dimming parameter for inovelli fan canopy module (@jsievenpiper)
#23033 Support power measurements for Legrand 412171 (@CodeForLove83)
#7656 Support electrical measurements for MG-ZG01W (@hexchain)
#7633 Enable modern OTA for BTH-RM & minor cleanup (@burmistrzak)
#7627 Support OTA for PMM-300Z2, PMM-300Z3 (@shinasys)
#7611 Add pincode support for Kwikset 99140-002 (@timnolte)
#7612 Support calibration_shutter_button_hold_time and calibration_shutter_delay_start_time for Bosch BMCT-SLZ (@boesec)
#7585 Optimize OTA (@Nerivec)
#7595 Support move_to_hue_and_saturation action for MiBoxer FUT089Z (@Frogomeli)
#1090 Add tuyaSetMinimumBrightness command (@mlichvar)
#1088 Expose all commands (@Koenkk)

Fixes

#2027 Add logging for interview (@Koenkk)
#23065 Availability code optimization/formatting (@Nerivec)
#23110 Bind code optimisation/formatting (@Nerivec)
#23026 Differentiate the MQTT publish/ received from regular MQTT logs (@ghoz)
#23209 Don't allow homeassistant.discovery_topic to be equal to mqtt.base_topic #23109 (@Koenkk)
#23058 Don't call onEvent on disabled devices (@ghoz)
#22880 Enforce no floating promises (@Nerivec)
#22995 Exclude homeassistant entries from null cleanup (@ghoz)
#22943 Fix floating promises originating from index.js (@Nerivec)
#23129 Fix OTA overriding custom software version attribute (@sjorge)
#23015 Groups code optimization/formatting (@Nerivec)
#23072 MQTT code optimization/formatting (@Nerivec)
#23043 Optional watchdog for "adapter disconnected"-type events (non-node-crash) (@Nerivec)
#23063 Remove outdated (@types/debounce)
#22920 Set voc_index to mdi:molecule to match other VOC icons in Home Assistant (@agoode)
#22895 Support ppb and ppm for VOC reporting in Home Assistant (@agoode)
#22896 Use occupancy device_class instead of motion for occupancy sensors (@agoode)
#7706 Refactor develcoSpecificAirQuality into manuSpecificDevelcoAirQuality (@sjorge)
#7703 Fix Bosch BSD-2 alarm states (@burmistrzak)
#7697 Fix energy reporting change for ShinaSystem PMM-300Z1, PMM-300Z2 and PMM-300Z3 (@shinasys)
#7685 Fix HA discovery for Bosch BTH-RA (@burmistrzak)
#7696 Fix leadingTrailingEdge for Inovelli VZM36 (@InovelliUSA)
#7702 Implement prettier (@Koenkk)
#7683 Allow exposes in ModernExtend interface to be a function (@Koenkk)
#18228 Remove unsupported tamper from Lidl HG06336 (@Koenkk)
#7679 BHI-US: Add missing expose of button actions (@mldytech)
#7682 Improve Third Reality 3RSS009Z battery % calculation (@deviantintegral)
#7654 Minor modernExtend updates for Bosch BMCT-SLZ (@burmistrzak)
#7675 Add 4512727 as whitelabel to EnOcean PTM 215Z (@ruant)
#7673 Fix 'customized' spelling for Tuya color_power_on_behavior (@robvanoostenrijk)
#7677 Omit battery_low for Tuya TS0203 models that don't have it (@deviantintegral)
#7667 Fix BITUO TECHNIK SPM01-U01 energy reporting (@script0803)
#7664 Inovelli - fix fan mode issue with vzm36 (@InovelliUSA)
#7668 Refactor Iluminize 511.344 to modernExtend (@chris-1243)
#7653 SPLZB-132: read develco specific sw/hw versions (@sjorge)
#7641 Add "off" fan mode for Inovelli (@MangoScango)
#7640 Fixes for TICMeter (@xmow49)
#7637 Improve support of Sunricher ZG2858A (@maginawin)
#7615 Add manuSpecificIkeaUnknown (@sjorge)
#7621 Add manuSpecificIkeaUnknown to all ikea devices (@sjorge)
#22985 Fix Tuya BLE-YL01 free_chlorine multiplied by 10 (@Koenkk)
#7582 Remove unsupported battery_low from SONOFF TRVZB (@Koenkk)
#21330 Fix LXN56-TS27LX1.2 support (@kamaldeepdhiman)
#7614 Move manuSpecificIkeaAirPurifier to zhc (@sjorge)
#502 Enable OTA for frient EMIZB-141 (@Koenkk)
#22937 Fix definition generator for lights only supporting genLevelCtrl (@Koenkk)
#7590 Fix typo in ZG-204ZM (dadar -> radar) (@Koenkk)
#7605 Fix E8332SRY800ZB with multiple model (@buiducnhat)
#7585 Log Images currently unavailable for as debug (@Koenkk)
#7602 STARKVIND child_lock broken (@sjorge)
#20983 Disable OTA for Ledvance 74746 (@Koenkk)
#7597 WISZB-120: Use "battery_voltage" instead of "voltage" (@kranzj)
#7590 Fix TuYa ZG-204ZM motion_detection_mode values (@Koenkk)
#22876 Rename TuYa to Tuya (@Koenkk)
#7587 Ubisys writeStructure for config was not using ZLC.DataType (@sjorge)
#1098 Add calibration attributes for Niko 552-72301 (@Sennevds)
#1085 Ember: automatically rename/ignore unsupported backup versions (@Nerivec)
#1089 Ember: workaround: auto-register unknown multicasts in coordinator (@Nerivec)
#1081 Ezsp: log failed message delivery (@Nerivec)
#1086 Hide network key in zigbee-herdsman logs (@ghoz)
#1080 Ember: Handle port close event triggered with error but without port error event (@Nerivec)
#1077 Remove all Bosch clusters (@burmistrzak)

Frontend

cb2b887 fix setting external converters and passlist not working (@Koenkk)

New supported devices

This release adds support for 51 devices:

[#7707](https://github.com/Koenkk/zigbee-herdsman-conv...

Contributors

lauer, agoode, and 69 other contributors

Assets 2

21 Join discussion

01 Jun 09:22

Koenkk

1.38.0

fe048e6

1.38.0

Notes

Bosch BMCT-SLZ: due to some changes, the device needs to be reconfigured. This is required in order to get the mode exposed.

Improvements

#22788 Add api for device re-interview (@justfalter)
#7553 Support new features for TuYa ZG-225Z and ZG-204ZM (@13717033460)
#7561 Enable OTA for some Develco devices (@samuli-as)
#22728 Add cover_mode to NodOn SIN-4-RS-20 and SIN-4-RS-20_PRO (@Koenkk)
#7566 Floor sensor support for Danfoss Icon (@tomash345)
#7549 Improvements for ISM300Z3 (@shinasys)
#7536 Allow to change sensitivity of Aqara ZNXNKG02LM (@kirovilya)
#7519 Support more features for WETEN PCI E (@Urusus2)
#7516 Support more features for Zemismart ZM25R1 (@Urusus2)
#1072 Ember: Custom stack config support (@Nerivec)
#1065 Ember: change default APS options to follow silabs impl (@Nerivec)
#1066 Optimize adapter disconnected state (@Nerivec)
#1042 Zigbee specification revamp (@Nerivec)

Fixes

#22619 Add namespace-specific levels support to logger (@Nerivec)
#22595 Add Node 22 support, remove Node 21 (@Koenkk)
#22583 Expose custom clusters to MQTT (@LaurentChardin)
#22258 Fix Entity 'homeassistant/sensor' is unknown (@Koenkk)
#22425 Fix custom cluster not available in frontend (@Koenkk)
#22674 Improve settings changing (@Koenkk)
#22701 Optimize Home Assistant discovery (@Koenkk)
#7583 Enforce no floating promises with eslint (@Nerivec)
#7271 Expose message to TuYa valueConverters (@Koenkk)
#7572 Convert Sonoff SNZB-02D & SNZB-02P to modernExtend (@burmistrzak)
#7575 Expose voltage for WISZB-120 (@kranzj)
#7574 Remove last manuSpecificBosch* usage (@burmistrzak)
#7573 Set entity category to configuration for Sonoff TRVZB open/close degree entities (@blacknell)
#7569 Partly convert Bosch BMCT-SLZ to modernExtend (@burmistrzak)
#7551 Add Envilar 7853 whiteLabel info (@MortenTurbo)
#7557 Add missing effects to LCX015 (@mundschenk-at)
#7548 Convert Bosch BSD-2 to modernExtend (@burmistrzak)
#7560 Convert Bosch Twinguard to modernExtend (@burmistrzak)
#7556 Fix iHORN LH03121 zone type (@Koenkk)
#7562 Fix IKEA E2112 OTA (@samuli-as)
#7554 Fixes in the PTVO converter (@ptvoinfo)
#7550 Increased the temperature setting interval for the Moes thermostats (BHT-002-GCLZB) (@kirovilya)
#21903 Fix brightness reporting for TuYa TS110E_2gang_2 (@Koenkk)
#16fddf99b54a0db551df5885901c5a42c41b374d Update TuYa TS0210 sensitivity description (@Koenkk)
#7534 Bug fixes in the PTVO device converter (@ptvoinfo)
#22573 Fix Failed to configure TypeError: func is not a function (@Koenkk)
#22686 Fix red color not working for Paulmann 500.4X (@Koenkk)
#7525 Improve modernExtend for Bosch BSEN-C*, BWA-1 & BTH-* (@burmistrzak)
#7532 Fix cannot find manuSpecificUbisysDeviceSetup (@sjorge)
#7529 Fix ID checks for scene/group 0 (@Nerivec)
#7530 Improvements for Aqara Spotlight T3 (@kirovilya)
#7523 Convert Bosch BWA-1 to modernExtend (@burmistrzak)
#7520 Add shared modernExtend for Bosch BTH-* (@burmistrzak)
#7521 Fix 3RSNL02043Z occupancy report (@llhappier)
#7509 Fix ShinaSystem USM-300ZB not reporting humidity (@shinasys)
#7510 Note QOTO QT-05M timer must be set after starting auto shutdown (@deviantintegral)
#7498 Convert Bosch BTH-RA to modernExtend (@burmistrzak)
#7482 Fix electrical measurements not working for _TZ3000_cehuw1lw with swBuilId 1.0.5 (@hutchx86)
#22528 Fix IKEA E2103 battery % multiplied by 2 (@Koenkk)
#22414 Log Default response to xxx failed as debug (@Koenkk)
#22720 Fix seMetering cluster (@Koenkk)
#1068 Ember: revert default APS options change in #1065 (@Nerivec)
#1062 Ember: fix some int8 read/written as uint8 (@Nerivec)
#22584 Fix DatabaseEntry with ID already exists (@Koenkk)

Frontend

452fc00 Add interview button (#2027) (@justfalter)
324538c Support custom attributes (nurikk/zigbee2mqtt-frontend#2001) (#2019) (@LaurentChardin)
23f61fa Send settings diff to Z2M instead of whole object (#2023) (@Koenkk)
152942d Info alert with a link to the documentation (#2020) (@MacDada)
a4b6bc2 User-selectable logs limit (#1999) (@MacDada)

New supported devices

This release adds support for 23 devices:

#22828 046677585235 Philips Hue Dymera indoor and outdoor wall light (@Koenkk)
#22821 RB 262 Innr E27 bulb (@Koenkk)
#7579 ZGA002 AEOTEC Pico switch with power meter (@iot-holding)
#7579 ZGA003 AEOTEC Pico switch duo with power meter (@iot-holding)
#7579 ZGA004 AEOTEC Pico shutter (@iot-holding)
#22707 404051 Müller Licht Tint LED-Spotlights, white+color 3x (1800-6500K+RGB) 19W (@Chrischan-git)
#7563 98426061 Nordtronic Remote Control (@maginawin)
#22772 TS0601_cover_9 TuYa Cover motor (@slothking87)
#7541 TS0603 TuYa Garage door opener (...

Contributors

mzanetti, justfalter, and 42 other contributors

Assets 2

11 Join discussion

09 May 20:26

Koenkk

1.37.1

ea39d86

1.37.1

Improvements

#7490 Improve support for Bosch BTH-RM230Z & BTH-RM (@burmistrzak)
#7479 Add colorloop effect for color lights (@slugzero)
#7484 Improve support for Bosch BTH-RM230Z (@burmistrzak)
#7463 Allow exposes function in combination with modernExtend (@Koenkk)
#7475 Support on/off countdown for various TuYa devices (@schauveau)
#7456 ZCL types revamp (@Nerivec)
#1033 ZCL types revamp (@Nerivec)

Fixes

#21852 Add Helm chart (@jlpedrosa)
#22426 Add settings for finer control over debug log level (@Nerivec)
#22565 Fix logger crashing on restart (@Nerivec)
#605 Fix MQTT ECONNREFUSED error (@Koenkk)
#7497 Fix Backlight for TuYa TS0013 (@piwi3910)
#7330 Fix configure failing and no lock/unlock action for Yale YAYRD256HA2619 (@Koenkk)
#22458 Fix IKEA E2001/E2002 configure (@Koenkk)
#22468 Fix Iluminize 511.10 not detected as supported (@Koenkk)
#2742 Rename TONGOU to Tongou (@Koenkk)
#22475 Add missing manuSpecificLumi to Aqara ZNJLBL01LM (@Koenkk)
#7489 Expose missing actions for Hue Wall Switch Module (929003017102/RDM001) (@marazmarci)
#22464 Fix power not updating for Aurora Lighting AU-A1ZBDSS (@Koenkk)
#22458 Fix IKEA E1524/E1810 and E2001/E2002 right/left hold action not working (@Koenkk)
#7486 Fix inverted cover status for LED-Trading 9135 (@anharald)
#22467 Fix no action on color wheel for Sunricher ZG2858A (@Koenkk)
#7483 Fix motor_state for ZNCLDJ12LM (@burmistrzak)
#22328 Fix no actions for some TuYa TS0026 (@Koenkk)
#22219 Disable unsupported power outage memory for Aqara CL-L02D (@Koenkk)
#22387 Fix motor_state for Lumi ZNJLBL01LM (@Koenkk)
#22403 Fix ReferenceError: meta is not defined for Lumi devices (@Koenkk)
#7451 Move Ubisys clusters/attributes out of zh (@sjorge)
#22212 Support color for Philips 7602031K6 (@Koenkk)
#7441 Rework and expand occupancy extend (@mrskycriper)
#1053 Ember: fix for some startup issues, with associated tests (@Nerivec)
#1052 Ember: fix permit join denied for single-device (zdo) (@Nerivec)
#1050 Move Received network/route error to info (@Koenkk)
#21825 Add motDEtat to liXeePrivate cluster (@Koenkk)
#22140 Fix Received undefined command from '0' (@Koenkk)
#1049 Fixes for ember (@Nerivec)
#22467 Add commandMoveToHueAndSaturation (@Koenkk)
#22396 Move Unknown attribute log to debug (@Koenkk)
#1043 Move some ZiGate log statement to debug (@Koenkk)

Frontend

07536d1 Show edit buttons on mobile width (#2012) (@S33G)
3279bf6 Display toggle to rename Home Assistant entity ID (#2010) (@danroc)

New supported devices

This release adds support for 2 devices:

#19804 THS317-ET-EY OWON Temperature sensor with probe (@awhitwam)
#7460 TICMeter GammaTroniques TICMeter pour Linky (@xmow49)

Fixed device detections

#17008 Detect _TZE200_s1xgth2u as TuYa TS0601_temperature_humidity_sensor_1 (@vivalton)
#22440 Detect _TZE204_pfayrzcw as TuYa MTG035-ZB-RL (@Koenkk)
#21940 Detect _TZE204_znvwzxkq as Zemismart ZN2S-RS3E-DH (@Koenkk)
#22364 Detect _TZE200_2se8efxh as TuYa TS0601_soil (@supaeasy)
#22356 Detect _TZ3000_gdyjfvgm as TuYa TS011F_5 (@mircicd)

Contributors

sjorge, S33G, and 16 other contributors

Assets 2

01 May 19:39

Koenkk

1.37.0

46f34c8

1.37.0

Notes

For Home Assistant users: this release requires at least Home Assistant 2024.4.
This release contains various improvements to the logging:
- Zigbee-herdsman now uses the Zigbee2MQTT logger, meaning that the logging will now be included in the Zigbee2MQTT log files.
- To increase the overal performance of Zigbee2MQTT, debug logging is not logged to zigbee2mqtt/bridge/logging and the frontend anymore.
The ezsp driver is now deprecated in favour of the new ember driver. The ember driver will become the officially supported driver for EmberZNet adapters in the future. See this discussion for more info and how to migrate.

Improvements

#21984 Unified logging across z2m/zh/zhc (@Nerivec)
#7455 Improvements for TuYa PJ-1203A (@schauveau)
#7472 Support on_level for Legrand 067771 (@tkintscher)
#7470 Use common motor_state values for Bosch & Lumi devices (@burmistrzak)
#7464 OTA support for Innr SP 240,242 and 244 (@leander091)
#7461 Add toggle for cover_position_tilt_disable_report (@burmistrzak)
#7427 Expose broadcast_alarm for Bosch BSD-2 (@burmistrzak)
#7432 Add custom cluster for SONOFF TRVZB (@Koenkk)
#7416 Add smoke sensitivity option for Bosch BSD-2 (@burmistrzak)
#7412 Legrand 067776(A): Added support for showing / hiding the tilt control (@FabianMangold)
#7230 Add Calibration attributes for SIN-4-RS-20 (@AlexisPolegato)
#7130 Add valve opening and closing configuration for Sonoff TRVZB (@lcheng33775823)
#7395 Added levelConfig to MEG5126-0300/MEG5172-0000 (@Nailik)
#7390 Ptvo.switch: expose DC power metering (@ptvoinfo)
#7328 Separate Sber devices and add SBDV-00079 (@mrskycriper)
#7289 Improve logging (@Koenkk)
#1039 Log EZSP adapter deprecated (@Koenkk)
#1028 Add zclCommandBroadcast to endpoint (@burmistrzak)
#1019 Support custom clusters (@Koenkk)
#1008 Add manuSpecificBosch11 cluster (@burmistrzak)
#989 Improve logging (@Koenkk)

Fixes

#22063 Change MQTT publish log to debug (@Koenkk)
#22069 Cleanup old logger leftovers (@Nerivec)
#22129 Convert logger into a class (@Nerivec)
#22088 Disable automatic reconfigure when configureKey changes (@Koenkk)
#22110 Fix crash when stopping in case MQTT client did not connect yet (@Koenkk)
#22066 Reduce MQTT publishing by excluding debug logging from bridge/logging (@Koenkk)
#22142 Remove deprecated Home Assistant color_mode (@Koenkk)
#7476 Correct attribute name for Aqara curtain hand open (@aurimasniekis)
#7467 Fix cover_position_tilt_disable_report (@burmistrzak)
#7473 Fix Eurotronic Zigbee Spirit system mode/host flags (@mzanetti)
#22348 Fix ROBB ROB_200-024-0 battery percentage divided by 2 (@Koenkk)
#7468 Fix typo "indetify" to "identify" (@jonnycastaway)
#21787 Fix Value '5' is not allowed for TuYa TS0601_fan_5_levels_and_light_switch (@Koenkk)
#22294 Fix illuminance not reporting for Bosch RFDL-ZB-MS (@Ltek)
#7452 Fix invalid contact for MCCGQ01LM (@Koenkk)
#22332 Fix TuYa TS0601_illuminance_temperature_humidity_sensor_2 exposes units (@Koenkk)
#7450 IKEA VINDSTYRKA uses different DataType for measuredValue (@sjorge)
#7438 Improve position reporting for Bosch BMCT-SLZ (@burmistrzak)
#7447 Add Yandex whitelabels (@mrskycriper)
#7444 Refactor modernExtend configure to array (@mrskycriper)
#7448 Update WS-K01D description (@mrskycriper)
#22312 Fix configure failing for _TZ3290_gnl5a6a5xvql7c2a (@Koenkk)
#7437 Improvements for FORIA and LEDRON devices (@kirovilya)
#7443 Improvements for PTVO ( (@ptvoinfo)
#7439 Refactor F00YK04-18-1 to modernExtend (@dinamik1488)
#7430 Increase Elko 4523430 max load (@Swampen)
#7417 GS: use alarm_2 for SGPHM-I1 and attribute cleanup (@mrskycriper)
#7399 Rework zoneStatus converter for Bosch BSD-2 (@burmistrzak)
#22205 Remove unsupported color from Innr RS 128 T (@Koenkk)
#7392 Aqara: refactor rotary knobs to modern extend (@mrskycriper)
#22183 Disable unsupported power on behaviour for Hive HALIGHTDIMWWE27 (@Koenkk)
#22078 Fix brightness out of range for various TuYa devices (@Koenkk)
#7393 Sonoff: force power source for SNZB-01P (@mrskycriper)
#7383 Improvements for Bosch 8750001213 Twinguard (@burmistrzak)
#7386 Minor improvements for Bosch BWA-1, BSD-2, BSEN-C2 & BSEN-CV (@burmistrzak)
#7378 Fix alarm_on_motion option for Bosch BWA-1 (@burmistrzak)
#7379 Fix Bosch BTH-RA display_ontime (@Burki24)
#21741 Fix TS0601_gas_sensor_3 detection (@Koenkk)
#7381 Inovelli: update some attribute descriptions for clarity (@InovelliUSA)
#7374 Use endpoint ids for filtering instead of friendly names (@mrskycriper)
#7373 Fix Inovelli VZM35 Breeze Mode (@InovelliUSA)
#7377 Fix Legrand identify (@FabianMangold)
#7372 Fixes for Bosch BSD-2 & BWA-1 (@burmistrzak)
#22148 Report Aqara LLKZMK12LM energy in kWh instead of Wh (@Koenkk)
#7376 Use legacyAction in modern extends to avoid problems from converter duplication (@mrskycriper)
#7364 Add RoomsAI 1-2-3 gang touch switches (@avbdr)
#7367 Added typing for lookup; fixed resulting issues (@Nerivec)
#7360 Fix Aqara FP1 zones problem (@kikecortes6)
#7359 Fix missing ssIasZone cluster on Bosch BWA-1 (@burmistrzak)
#7354 Fix TuYa TS0726 not sending actions (@kirovilya)
[#7355](https://github.com/Koenkk/zigbee-he...

Contributors

aurimasniekis, dflemstr, and 69 other contributors

Assets 2

53 Join discussion

01 Apr 18:00

Koenkk

1.36.1

ffc2ff1

1.36.1

Notes

Due to some internal changes, some external converters will break. To fix it simply remove const extend = require('zigbee-herdsman-converters/lib/extend'); from the external converter.

Improvements

#7201 Improve Aqara DJT12LM support (@mrskycriper)
#7286 Improve support for Bosch 8750001213 Twinguard (@burmistrzak)
#21960 Support emergency_heating mode for Zen-01-W (@Koenkk)
#7281 Improve Danfoss Icon2 support (@tomash345)
#7251 Add zclcommand converter (@kirovilya)
#7239 Modern extend improvements (@mrskycriper)
#7200 Remove legacy extend support (@Koenkk)
#7191 Improve Aqara ZNCLDJ14LM support (@deiger)
#7196 Support battery and OTA for IKEA E2202 (@thatslolo)
#7177 Add additional exposes for 8719514440937/8719514440999 (@m00nyONE)
#7178 Added OTA support for various Schneider Electric devices (@rmcleay)
#7173 BAC-002-ALZB & BAC-003 fan control units support (@robvanoostenrijk)
#7134 New modern extends and GS device converters update (@mrskycriper)
#7074 Add status LED switch for WB-MSW-ZIGBEE v.4 and refactor to modern extend (@mrskycriper)
#7162 Support indicator_mode for Schneider Electric EKO09716 (@Minims)
#7142 Add impulse mode configuration on SIN-4-1-2X devices from NodOn (@AlexisPolegato)
#978 Add zclCommand (@kirovilya)
#977 Base support for channel switching without re-pairing, support it for Ember adapter (@Nerivec)
#982 Support custom read responses (@Koenkk)
#968 Add tuyaAction command (@kirovilya)
#966 Add more attributes for manuSpecificLumi (@deiger)
#963 Update manufaturer codes (@Koenkk)
#950 EZSP: Network restore from backup (@kirovilya)

Fixes

#21652 Add more Home Assistant entity icons (@mrskycriper)
#21653 Fix set endpoint name conversion (@Koenkk)
#21680 Fix crash due to race condition during interview (@srett)
#12794 Fix incorrect update state when Z2M is restarted during OTA update (@Koenkk)
#21726 Home Assistant: remove button name if device_class is present (@mrskycriper)
#7287 Fix XX has multiple 'ota' when generating definition (@Koenkk)
#7291 Ignore GreenPower endpoint in definition generator (@Koenkk)
#7272 Inovelli: fix some non-working parameters (@InovelliUSA)
#7269 Set MCLH-02 color temp range and convert LifeControl to modern extend (@mrskycriper)
#7261 Fix OWON PC321 current value (@dduransseau)
#7252 Adding some parameters and fixing some ranges for Inovelli devices (@InovelliUSA)
#21752 Fix negative temperature value for TuYa TS0601_temperature_humidity_sensor_1 incorrect (@Koenkk)
#7259 Fix unrealistic pressure readings from Lumi WSDCGQ12LM (@rotdrop)
#7257 Fixes for TuYa BAC-003 (@robvanoostenrijk)
#7253 Set color temperature range for BDHM8E27W70-I1 and expose battery voltages (@mrskycriper)
#7245 Fix Inovelli vzm35-sn and vzm36 not reporting fan speed correctly (@InovelliUSA)
#21855 Fix TuYa ERS-10TZBVK-AA action not working (@Koenkk)
#7233 Update Third Reality 3RTHS0224Z description (@weihuan1111)
#7228 Fix pairing of Legrand devices failing (@Koenkk)
#7219 Fix iasZoneAlarm extend (@mrskycriper)
#21828 Increase TuYa TS0601_thermostat_3 local temperature calibraion range (@Koenkk)
#7204 Properly define generated device to be multiEndpoint (@ffenix113)
#7049 Support auto system_mode for Bosch Radiator thermostat II (@dierochade)
#7223 Update manufacturer codes to use ZCL definition (@Nerivec)
#7215 Fixes for ptvo.switch (@ptvoinfo)
#21775 Fix crash when customTimeResponse fails (@srett)
#7212 Fix for Legrand OTA updates (newer firmwares) (@FabianMangold)
#7202 Fix Develco FLSZB-110 temperature reporting (@samuli-as)
#7198 Refactor all switches to modernExtend (@Koenkk)
#7192 Fix some Aqara modernExtend (@mrskycriper)
#7194 Refactor more devices to modernExtend (@Koenkk)
#7185 Don't allow sceneID 0 (@Koenkk)
#7183 Fix 8719514440937/8719514440999 description (@m00nyONE)
#7179 Fix alarm for HESZB-120 (@Rickth64)
#7180 Fix battery modernExtend (@mrskycriper)
#7164 Inovelli bug fixes (@nathanfiscus)
#7155 Use writeStructure for Ubisys input configuration (@sjorge)
#7159 Fix power source for Aqara WS-USC01 (@gtalusan)
#7156 Add Aqara WB-R02D and DW-S03D whitelabels (@mrskycriper)
#17148 Fix led_indicator reversed for Aqara ZNCWWSQ01LM (@Koenkk)
#21648 Fix Value '4' is not allowed for TuYa YXZBRB58 (@Koenkk)
#21661 Fix incorrect long click send for WXKG01LM (@Koenkk)
#16900 Fix LEDVANCE ota failing (@Koenkk)
#20692 Fix no energy for Aqara QBKG24LM (@Koenkk)
#7143 Fix occupancy extend undefined args (@mrskycriper)
#7152 Fix the broken LED indicator for Schneider Electric wiser devices (@lucasteligioridis)
#7149 Make Philips 324131092621 configure more reliable (@sjorge)
#7144 Reference new named cluster and attribute for Schneider Electric switchActions (@lucasteligioridis)
#21449 Remove unsupported electricity measurements from Samotech SM323_v1 (@Koenkk)
#996 Ember: boost stack config (@Nerivec)
#993 Ember: bugfixes (@Nerivec)
#992 ZStack: emit network address change event on concentratorIndCb (@deviantintegral)
[#987](https://g...

Contributors

cbrunnkvist, deviantintegral, and 65 other contributors

Assets 2

78 Join discussion

01 Mar 20:05

Koenkk

1.36.0

86ed71c

1.36.0

Notes

This release adds support for a new experimental Ember driver which can be used as a replacement for the existing EZSP adapter driver. In case you are currently experiencing issues with your EZSP adapter (e.g. Dongle-E/SkyConnect), please give it a try. Instructions on how to use it can be found here. Many thanks to @Nerivec for implementing this!

Improvements

#21459 Add experimental Ember adapter (@Nerivec)
#21372 Add support for button entity in Home Assistant (@mrskycriper)
#7023 Support fanTimerMode for Inovelli VZM35-SN (@JefeDavis)
#7127 Add short_press_2_of_2 action to EnOcean PTM 216Z (@Nerivec)
#7131 Enable LED indicator functionality for 41E10PBSWMZ-VW (@lucasteligioridis)
#7072 Support switch_type for TuYa TS0601_dimmer_5 (@RafaelDuncan)
#7113 Add color support to Acuity Brands Lighting RB56SC and RB56AC (@zhihengq)
#7115 Expose Breeze Mode to Inovelli VZM35 (@nathanfiscus)
#7109 Support motor_speed for Aqara ZNJLBL01LM (@chaayac)
#7083 Modern extend enhancements (@mrskycriper)
#7086 Add trigger_count for Aqara MCCGQ11LM and SJCGQ11LM (@Drafteed)
#7060 Add new identify expose (@mrskycriper)
#7056 Support _TZE204_ztqnh5cg (@MondoGao)
#7044 Support more features for Aqara ZNQBKG26LM and ZNQBKG26LM (@alex209)
#937 Add manuSpecificSchneiderFanSwitchConfiguration (@DanielNagy)
#918 Add new ember adapter implementation, targeting EZSP 13 and above (@Nerivec)
#21512 Enable OTA for Frient HESZB-120 (@jamesonuk)

Fixes

#21492 trigger_count & power_outage_count adjustments in HA (@Drafteed)
#21610 Add noise and noise_detected to HA lookup (@mrskycriper)
#21494 Check if Zigbee2MQTT is running in update.sh (@Toniob)
#21576 Fix endpoint matching for TuYa dummy endpoints (@Koenkk)
#21493 Fix parsing entity name that contains slash in the name and endpoint specification (@grafalex82)
#21521 Improve nested group and device name match (@grafalex82)
#21214 Match endpoint name in the MQTT topic based on endpoints listed in the definition (@grafalex82)
#21446 Only configure routers on startup (@Koenkk)
#21264 Remove dependency on predefined list of endpoints (parseEntityID() function) (@grafalex82)
#21325 Remove predefined endpoint list, remove limits on device friendly name (@grafalex82)
#7139 Reference attributes directly from cluster for various Schneider Electric specific attributes (@lucasteligioridis)
#21607 Fix battery percentage doubled for ROBB ROB_200-025-0 (@Koenkk)
#7135 Fixes issue of passing function to TuYa lookup value converter (@stalniy)
#7128 Fix Attempt to access memory outside buffer bounds error after pairing of Aqara SRTS-A01 (@Koenkk)
#21589 Fix identify failing for Legrand devices (@Koenkk)
#20032 Fix power_on_behavior for TuYa TS011F_2_gang_wall (@Koenkk)
#21475 Fix Aqara KQJCMB11LM value (@Koenkk)
#7123 Correction to the model name for Moes bulbs (@diegocjorge)
#21570 Fix Orvibo ST30 configure failing (@Koenkk)
#7121 Fix Owon PC321 current value (@dduransseau)
#7122 Removed links from description fields (@xyzroe)
#7120 Update QBKG18LM converter and refactor all Aqara T1 wall switches to modern extend (@mrskycriper)
#7111 Improve trigger_count for MCCGQ11LM and SJCGQ11LM (@Drafteed)
#7117 Lumi: add quirkCheckinInterval(1_HOUR) to battery devices to fix configure failing (@sjorge)
#21442 Add missing color for EGLO 99099 (@Koenkk)
#21541 Fix Orvibo ST30 configure failing (@Koenkk)
#7107 Use deviceEndpoints extend instead of endpoint definitions (@mrskycriper)
#19765 Expose battery for TuYa LKWSZ211 (@KipK)
#7027 Fix action values of Vesternet VES-ZB-REM-013 (@spudwebb)
#7104 Fix system mode for Acova PERCALE 2 and TAFFETAS 2 (@cperriot)
#7099 Fix various Linptech ES1ZZ(TY) exposes (@AntoineGS)
#7098 Remove unsupported effect and power on behaviour for Samotech SM325-ZG (@alexeiw123)
#21442 Add missing action_group to various EGLO 99099 events (@Koenkk)
#20955 Fix Failed to find endpoint which support OTA cluster for various TuYa TS011F_plug_3 (@Koenkk)
#7094 Fix switch missing for CH2AX/SWITCH/1 and CH10AX/SWITCH/1 (@Nailik)
#20032 Add OTA for TuYa TS011F_2_gang_wall (@Koenkk)
#7087 BMCT-SLZ: Expose switch type in shutter mode and fix UNSUPPORTED_ATTRIBUTE error (@slugzero)
#7079 Remove unsupported tamper from various TuYa TS0207_water_leak_detector (@Chartreusito)
#7069 Enable configure reporting for SBM300ZX (@shinasys)
#21317 Fix Cannot read properties of undefined (reading '1') error for various Develco plugs (@Koenkk)
#21353 Fix preset for TuYa ZWT198/ZWT100-BH (_TZE204_lzriup1j) (@Koenkk)
#7062 Fix Schneider Electric MEG5126-0300/MEG5171-0000 endpoints (@Nailik)
#7066 Rename MOES to Moes to unify vendor (@tefracky)
#7065 Update various min/step values for Moes BRT-100-TRV (@tefracky)
#7037 Fix Aqara JTQJ-BF-01LM/BW device type and power source (@VivantSenior)
#20032 Fix state not updating for MakeGood MG-AUZG01 (@Koenkk)
#7047 Change window_open to window_detection for Bosch thermostats (@danielpetrovic)
#21282 Fix move and presense sensitivity for TuYa ZY-M100-24G (@Koenkk)
#7054 Fixes for YSRAI YSR-MINI-01_wwcw (@nklebedev)
#6982 Refactor Lumi specific converters (@mrskycriper)
#7058 Update WETEN PCI E buzzer_feedback description (@BenJamesAndo)
#7039 Fix Aqara Z1 triple and quadruple switch middle button not working (@waterlou)
#7038 Fix negative power values for Develco EMIZB-132 (@svhelge...