201911 fixes show ipv6 interfaces issue #937
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
* Fastboot/warmboot platform plugin * Added platform plugin
Add utility to translate text output of syseeprom dump into JSON, for consumption by new management (1.0) command. Signed-off-by: Howard Persh <hpersh@yahoo.com>
Signed-off-by: Mykola Faryma <mykolaf@mellanox.com>
Currently it misses the case where data for a new key is empty.
#757) * [neighbor advertiser] catch all exceptions while trying https endpoint When connecting https endpoint failed, we need to try http endpoint. Therefore we need to catch all exceptions. Signed-off-by: Ying Xie <ying.xie@microsoft.com> * raise exception if https returned non-success status code
…re (#758) * [neighbor advertiser] raise exception when http endpoint return failure Signed-off-by: Ying Xie <ying.xie@microsoft.com> * Delete deprecated error checking code * Add back check for None
…(s) (#761) Once any critical service is shutdown (radv/swss/syncd), we have to commit to the reboot. Failing in the middle will leave the system in bad state. Signed-off-by: Ying Xie <ying.xie@microsoft.com>
#770) * A generic JSON file updater, which can add/update-existing attributes. This tool would be used to update /etc/sonic/core_analyzer.rc.json file to add credentials by HW proxy. * Updated per review comments. The option is better named.
* [portstat] fix header used Signed-off-by: Mykola Faryma <mykolaf@mellanox.com> * [portstat] fix print table_as_json Signed-off-by: Mykola Faryma <mykolaf@mellanox.com> * Fix tx_ovr field
* [show] enhance 'show ip[v6] bgp summary' command * changing ipaddr to ipaddress
…op counters (#784) Signed-off-by: Danny Allen <daall@microsoft.com>
Merge two vrf configuration to avoid user can't add or delete management VRF through CLI. Co-authored-by: Minkang-Tsai <58835052+Minkang-Tsai@users.noreply.github.com>
If ACL table name contains the substring "v6", set the EtherType of the rule to V6, otherwise set to V4.
… OID->interface name mapping (#789) In release branches prior to 201911, FDB or ARP learnt on VLAN interface LAG port will cause nothing to appear in the "show arp" or "show mac" output because there existed no OID->interface name never had the mappings for LAG interface. This issue has since been fixed in master (and 201911). However, making this change in master is not harmful and will prevent a regression from causing no output to be displayed for the interface name in the future.
* [neighbor advertiser] remove http endpoint access Signed-off-by: Ying Xie <ying.xie@microsoft.com> * Remove obsolete comment
- Remove prefix-trimming from drop reason capability query - Remove prefix-trimming from create/add safety checks Signed-off-by: Danny Allen <daall@microsoft.com>
Signed-off-by: akhilesh.samineni@broadcom.com
Implemented following commands to use Zero Touch Provisioning show ztp status config ztp enable config ztp disable config ztp run Signed-off-by: Rajendra Dendukuri <rajendra.dendukuri@broadcom.com> Co-authored-by: Akhilesh Samineni <47657796+AkhileshSamineni@users.noreply.github.com> Co-authored-by: rlhui <48738894+rlhui@users.noreply.github.com>
…or each container (#798) Since we introduced the auto-restart feature for each container, we need add a show subcommand to display the current status of auto-restart feature for all containers or a specific container. - How I did it We define a function named autorestart to show the status of this features. This function will accept an option parameter which is the container name. If this parameter is not specified, this function will by default show the status of all containers. Otherwise it will show the status of specific container. Signed-off-by: Yong Zhao <yozhao@microsoft.com>
…re for each container (#801)
…init_cfg.json implicitly (#812) * [config/main.py] Modify the load() and reload() functions to load config from config_db.json and init_cfg.json. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [config/main.py] Undo the changes which load the configuration from init_cfg.json for load() function and define a constant string for the path of init_cfg.json. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [config/main.py] Correct a typo. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [config/main.py] Added an else statement in line 551 to decide whether the init_cfg.json exsits or not in reload function. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [config/main.py] Correct a typo error. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [config/main.py] Change the loading order and we should first load init_cfg.json and then config_db.json. Signed-off-by: Yong Zhao <yozhao@microsoft.com> * [config/main.py] Use constant string to represent the path of init_cfg.json. Signed-off-by: Yong Zhao <yozhao@microsoft.com>
Signed-off-by: Akhilesh Samineni <akhilesh.samineni@broadcom.com>
…815) This is possible if some of docker are not built then corresponding service file will not be present
…624) This change is related to Platform Driver Development Framework (PDDF) which is being added to sonic-buildimage repo. More details can be found here, sonic-net/SONiC#406 PDDF supports its own CLI utilities, which use generic PDDF component plugins. I added these PDDF CLI utilities.
Add a "show platform fanstatus" command to allow user fetch FAN status data. Add a "show platform temperature" command to allow user fetch thermal status data.
…ts (#772) * [fwutil]: initial version. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com> * [fwutil]: Fix UI: enable progressbar render finalizer. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com> * [fwutil]: integrate utility with SONiC CLI. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com> * [fwutil]: update CLI command reference documentation. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com> * [fwutil]: Revisit CLI architecture: avoid direct imports. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com> * [fwutil]: Fix review comments: refactor CLI command reference. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com> * [fwutil]: Fix review comments: update CLI documentation. Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
* [Vxlan] : adding show vnet/vxlan cmds
…e for FRR routing stack (#884) Co-authored-by: Travis Van Duyn <trvanduy@microsoft.com>
- This flag is currently no functional impact with just this change. - This flag is intended to coordinate fast-reboot shutdown path. - This flag enables moving fast-reboot per service knowledge to service scripts. which unblocks moving warm-reboot per service knowledge to service scripts. - This flag is consistent with the bootup flag we setting on the boot up path. Signed-off-by: Ying Xie <ying.xie@microsoft.com>
Co-authored-by: Travis Van Duyn <trvanduy@microsoft.com>
Signed-off-by: Nazarii Hnydyn <nazariig@mellanox.com>
* [utility] Filter FDB entries FDB table can get large due to VM creation/deletion which cause fast reboot to slow down. This utility fitlers FDB entries based on current MAC entries in the ARP table. signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>
* [Phase 1] Multi ASIC config command changes, db_mgrator.py script updates for handing namespace. * Fixes and comment updates * Comments addressed + added support for user to input the config files per namespace also. * Updates per comments + based on the updated SonicV2Connector/ConfigDBConnector class design * Review comments update. * Help string updated for config save/reload/load
* Fix NameError for 'swsssdk', align neig output
* Changes:
1) Add syslog support.
2) Enable forever periodic scan
3) Skip link local addresses
4) Skip eth0 routes
3) Adopt to 20191130 changes
3.1) APPl-DB INTF_TABLE may not have IP address
3.2) nexthop is never empty
* No logical code change. A small name change.
* 1) Adopt to 201811 -- Filter out 'lo' & 'docker0' in addition to 'eth0' as local routes
2) Ensure to read route entry w/o prefix, if not present with prefix
- Modify the load_minigraph command handler to support multi NPU platforms
…multi-npu platforms. (#908) * Changes to support acl-loader command for multi-npu platforms. Move multi-npu related utility functions from config/main.py to sonic-device-util.py so that it can be used by acl-loader/any other module. Updated Mirror Session add/remove for multi-npu platforms. Needed for Everflow ACL rule programming. * Address review comment to change comment from """ to # except for doc string
* Changes to ignore services stop/start for config reload and load_minigraph command. This will be needed when executed from config-setup script. * Updated Command Reference document * Address Review Comments.
…g DB (#885) Fix is_mgmt_vrf_enabled for the case where MGMT_VRF_CONFIG is not at all in the config DB. This is the case where mgmt vrf is never configured. The function throws error at File "/usr/lib/python2.7/dist-packages/show/main.py", line 651, in is_mgmt_vrf_enabled mvrf_dict = json.loads(p.stdout.read()) Two show commands uses is_mgmt_vrf_enabled. "show mgmt-vrf" and "show ntp" Both commands throw error if mgmt vrf is never configured Co-authored-by: Bing Sun <Bing_Sun@dell.com>
* Multi-asic changes for config bgp commands and utilities. * Review comments update * Optimized the logic of checking the internal hosts using AS number. * API changes due to rebase. Also setting ignore_local_hosts=false explicitly in BGP commands so that existing single ASIC platform implementation is unchanged.
load_minigraph. The behaviour got changed as part of multi-npu change so make it correct again.
* Changes to make lldp show command for multi-npu platforms. We will display only front-panel port information. * Address Review Comments. * Added Comment * Fix LGTM error * Address Review Comments
* [Mellanox] add document for thermal control related cli * Update review comments thermal zones -> thermal sensors * Make example better
… and thermal status (#836) * [thermal fix] use natural sort for fan status and thermal status * [thermal fix] set fan status to N/A when fan is removed * Adjust header name for show platform temperature output
* [thermal fix] use natural sort for fan status and thermal status * [thermal fix] set fan status to N/A when fan is removed * Adjust header name for show platform temperature output
tim-rj
changed the title
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
- What I did
check ipv6 interfaces
- How I did it
show ipv6 interfaces
- How to verify it
show ipv6 interfaces
- Previous command output (if the output of a command-line utility has changed)
root@switch2:/home/admin# show ipv6 interfaces
Interface Master IPv6 address/mask Admin/Oper BGP Neighbor Neighbor IP
Bridge fe80::88dc:a8ff:fecf:f537%Bridge/64 up/up N/A N/A
Ethernet0 PortChannel1 fe80::5a69:6cff:fefb:2230%Ethernet0/64 up/up N/A N/A
Ethernet52 2001:50:5:1::2/64 up/up N/A N/A
fe80::5a69:6cff:fefb:2230%Ethernet52/64
Loopback0 6::6/128 up/up N/A N/A
fe80::44f4:e3ff:fe31:cc94%Loopback0/64
PortChannel1 Bridge fe80::5a69:6cff:fefb:2230%PortChannel1/64 up/up N/A N/A
Vlan3 150::1/64 up/up N/A N/A
fe80::5a69:6cff:fefb:2230%Vlan3/64
eth0 fe80::5a69:6cff:fefb:2230%eth0/64 up/up N/A N/A
lo ::1/128 up/up N/A N/A
root@switch2:/home/admin# show ipv6 interfaces
root@switch2:/home/admin# show ipv6 interfaces
Interface Master IPv6 address/mask Admin/Oper BGP Neighbor Neighbor IP
Bridge fe80::88dc:a8ff:fecf:f537%Bridge/64 up/up N/A N/A
Ethernet0 PortChannel1 fe80::5a69:6cff:fefb:2230%Ethernet0/64 up/up N/A N/A
Ethernet52 2001:50:5:1::2/64 up/up LCv6 2001:50:5:1::1
fe80::5a69:6cff:fefb:2230%Ethernet52/64
Loopback0 6::6/128 up/up N/A N/A
fe80::44f4:e3ff:fe31:cc94%Loopback0/64
PortChannel1 Bridge fe80::5a69:6cff:fefb:2230%PortChannel1/64 up/up N/A N/A
Vlan3 150::1/64 up/up N/A N/A
fe80::5a69:6cff:fefb:2230%Vlan3/64
eth0 fe80::5a69:6cff:fefb:2230%eth0/64 up/up N/A N/A
lo ::1/128 up/up N/A N/A