openvas-scanner 21.4.3

21.4.3 - 2021-10-11

Added

• Add nasl function sftp_enabled_check() to check if sftp subsystem is enabled in the target.
  • Backport #853
  • Backport #862
  • Add find_all to eregmatch() nasl function #875
• Fix Segmentation fault when freeing hosts and alive hosts #888

Changed

• Changed defaults for installation locations #826
  • SYSCONFDIR is /etc by default now
  • LOCALSTATEDIR is /var by default now
  • OPENVAS_RUN_DIR is /run/ospd by default now
  • OPENVAS_FEED_LOCK_PATH is /var/lib/openvas/feed-update.lock by default now

Fixed

• Fix interrupted scan, when the process table is full. #832
• Use fchmod to change file permission instead of on open to prevent race conditions 854
• Fix plugins upload #878
• Fix Error Message when NVTI chache init failed #885
• Fix potential segfault.#884

openvas-scanner 20.8.4

20.8.4 - 2021-10-11

Changed

• Changed defaults for installation locations #826
  • SYSCONFDIR is /etc by default now
  • LOCALSTATEDIR is /var by default now
  • OPENVAS_RUN_DIR is /run/ospd by default now
  • OPENVAS_FEED_LOCK_PATH is /var/lib/openvas/feed-update.lock by default now

Fixed

• Backport #832. Fix interrupted scan, when the process table is full. #835
• Fix Segmentation fault when freeing hosts and alive hosts #893
• Backport #884. Fix potential segfault.#892

openvas-scanner 21.4.2

21.4.2 - 2021-08-03

• Fix clang-analyzer warnings.
  #791
  #795

openvas-scanner 20.8.3

20.8.3 - 2021-08-03

Fixed

• Fix clang-analyzer warnings.
  #791
  #795

openvas-scanner 21.4.1

21.4.1 - 2021-06-23

Added

• Improve nasl linter to catch more cases of undeclared variables. #728
• Add deprecation warning for source_iface related settings which will be removed with the 21.10 release. #732
• New Credentials for SSH to get su privileges. Backport of #744. #753

Changed

• Update default log config #711

Fixed

• Use host from the original hosts list when boreas is enabled. #725
• Initialize the the kb to store results for openvas-nasl #735
• Fix unittest. Mock kb_lnk_reset. #748

Removed

openvas-scanner 20.8.2

20.8.2 - 2021-06-23

Added

• Check for wrong names or values in the script_xrefs params.
  #650
  #653
• Log a message if the scanner did not launch all plugins against a host.
  #700
  #734

Changed

• Replace bogus data with a better message and the vendor. #665
• Improve log message for WMI connect failed or missing WMI support. #670
• Don't use g_error. Use g_warning instead and let the scanner to continue. #710
• Update COPYING file. #750
• Set file permissions when syncing community feed #769

Fixed

• Fix issues discovered with clang compiler. #654
• Fix gcc-9 and gcc-10 warnings. #655
• Fix double free in nasl_cert_query. #658
• Fix message to the client if there is a iface problem. #695
• Fix SIGSEGV when no best route is found. #702
• Fix host count when reverse_lookup_only is enabled. #715
• Use host from the orignal hosts list when boreas is enabled. Backport of PR #727. #725
• The function description of nasl_ssh_shell_read() has been fixed. #755

Removed

• Remove code from the openvas daemon era. Do not flushall redis. #689
• Remove deprecated option logfile. #713

OpenVAS v21.4.0

Added

• Add scanner-only option to enable tls debugging. #558
• Extend nasl lint to detect if function parameter is used twice. #585
• Add option to specify if a host can be scanned through its IPv4 and IPv6 in parallel.
  #604
  #645
• Add insert_tcp_options and insert_tcp_v6_options nasl functions. #618
• Add get_tcp_option and extend dump_tcp_packet nasl functions. #621
• Add new scanner only option for spawning NASL functions with a different owner. #634
• Add debug logs for allow_simultaneous_ips=no. #685
• Add min_free_mem and max_sysload scanner only options. #690

Changed

• Store results in main_kb instead of host_kb. #550
• Also use internal function name in some nasl log messages. #611
• Move more scanner preferences to gvm-libs to make them available for openvas-nasl. #614

Removed

• Use the nvticache name from gvm-libs, defined in nvticache.h. #578

OpenVAS v20.8.1

Added

• Extend nasl lint to detect if function parameter is used twice. #590
• Add support for TLSv1.3. #588#598
• Add alternative for supporting snmp during scans. #594
• Add resolve_hostname_to_multiple_ips() NASL function. #596
• Send message to the client with hosts count. #606
• Use nasl_perror on invalid input and add more documentation. #608
• Add timeout argument to ssh_connect() nasl function to set the connection timeout. 631

Changed

• Downgrade wmi queries log level for common errors.
  #602
  #607
• Rename some nasl functions and func parameters for consistency and fix byte order issue in get_ipv6_element. #613
• Change log level from debug to message to show max_host and max_scan during scan start. #626

Fixed

• Fork vhosts before creating the socket.#576
• Check if another forked child has already added the same vhost. #581
• Send duplicated hosts as dead hosts to ospd, to adjust scan progress calculation. #586
• Only send the signal if the pid is a positive value. #593
• When routes with same mask are found the route with the better metric is chosen.
  #593
  #639
• Fix malformed target. #625
• Fix snmp result. Only return the value and do not stop at the first \n. #627
• Fix masking of IPv6 addresses. #635
• Fix technique switch for getting the appropriate interface to use for IPv6 dst addr. #636
• Fix host count. Set to -1 when the target string is invalid. #646

OpenVAS v20.8.0

Added

• Create greenbone-nvt-sync create lock file during feed sync.
  #458
  #459
• Extend script_get_preference() to get the value by id. #470
• Add extended environmental variables info to greenbone-nvt-sync help text. #488
• Extend nasl functions which generate results with optional "uri" parameter #526
• Add nasl function to get the host kb index. #530
• Print the filter used by pcap in the error message.
  #537
  #540

Changed

• The logging of the NASL internal regexp functions was extended to include the pattern in case of a failed regcomp(). #397
• Add config for gpg keyring path (OPENVAS_GPG_BASE_DIR) #407
• Use func instead of FUNCTION #419
• Use pcap_findalldevs() instead of deprecated function pcap_lookupdev() #422 #430
• Add port-range option for openvas-nasl #431
• Add test_alive_hosts_only feature. #456
• Don't reload the plugins when start a new scan. #458
• Drop http feed sync. #478
• Add aligned summary to log at scan end. #496
• Unify log messages about start/end of scan and of hosts. #500
• Use flock to lock the feed lock file. #507
• Move alive detection module (Boreas) into gvm-libs #519
• Allow to set all legal types of icmp v6 in icmp header in openvas-nasl. #542
• The output of the NASL dump_* packet forgery functions was made consistent. #555
• Make drop_privileges setting a scanner-only preference. #557
• Feed lock path is now configurable. #574

Fixed

• Improve signal handling when update vhosts list. #425
• Wait for all children instead of waiting just for one a time. #428
• Don't detect MongoDB as a HTTP service. #447
• Set status finished and send a message if the port list is invalid. #453
• Fix format-truncation warning in GCC 8.2 and later. #461
• Clean the new kb when the scan was stopped and the host has not been started. #494
• Prevent child deadlock. #491
• Memleak fixes for kb_item_get_str(). #502
• Fix denied hosts. #510
• Fix openvas-nasl. Add kb key/value for all vhosts. #533
• Wait for last plugin to finish before change to other category. #534
• Corrected function parameter names in nasl_perror calls. #539
• Various updates to the nasl_perror() error texts. #539
• Fix icmp checksum calculation in openvas-nasl. #543
• Fix ipv6 flow label in nasl_packet_forgery_v6() for openvas-nasl. #545
• Fix name of NASL internal IPPROTO_IP variable. #552
• Fix byte ordering and wrong PROTO identifier in dump_ipv6_packet() for openvas-nasl. #549
• Fix size calculation which lead to alloc error in get_tcp_element() of openvas-nasl. #546
• Fix filter out of default 'radio' type preferences #560
• Allow group access to lockfile and fix empty timestamp #562

Removed

• Removed "network scan" mode. This includes removal of NASL API methods "scan_phase()" and "network_targets()". Sending a "network_mode=yes" in a scanner configuration will have no effect anymore. #493

OpenVAS v7.0.1

Added

• Display gvm-libs version in openvas --version output #436
• Create greenbone-nvt-sync create lock file during feed sync.
  #457
  #460
• Extend script_get_preference() to get the value by id. #471

Changed

• Improve handling of invalid or existent ids of nvt's preference id. #416
• Perform a scan even if there are missing plugins. #439
• Don't reload the plugins when start a new scan. #457
• Use new URL for GCF rsync. #474

Fixed

• Do not store in memory an empty file received as nvt preference. #409
• Fix stop scan. #414
• Fix hanging scans. #423
• Improve signal handling when update vhosts list. #426
• Wait for all children instead of waiting just for one a time. #429
• Fix format-truncation warning in GCC 8.2 and later. #462

Removed

• Drop HTTP sync #489