Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Weekly Digest (16 June, 2019 - 23 June, 2019) #12318

Closed
weekly-digest bot opened this issue Jun 23, 2019 · 0 comments
Closed

Weekly Digest (16 June, 2019 - 23 June, 2019) #12318

weekly-digest bot opened this issue Jun 23, 2019 · 0 comments
Labels
[ARCHIVED] weekly-digest (depreciated)

Comments

@weekly-digest
Copy link

weekly-digest bot commented Jun 23, 2019

Here's the Weekly Digest for PX4/Firmware:

ISSUES

Last week 29 issues were created.
Of these, 15 issues have been closed and 14 issues are still open.

OPEN ISSUES

💚 #12317 Stable v1.9.1 fixes, by dagar
💚 #12315 v1.9.1 TODO, by dagar
💚 #12314 PX4 Models crash Gazebo, by capitalPSA
💚 #12313 Here2 not being detected with PX4 firmware, by donbreum
💚 #12312 Can't get the distance data of the PX4_Flow and sonar, by Martz19
💚 #12310 Request for differential drive robot control, by rishab26201
💚 #12309 Mavlink PLAY_TUNE message does not play tune, by wluker
💚 #12307 RC loss behavior, by RyanHurst
💚 #12306 launch: multiple sdf models, by lamping7
💚 #12305 EKF2_RNG_A_HMAX, EKF2_RNG_A_VMAX missing units in parameter meta data, by DonLakeFlyer
💚 #12304 Removed negative sign from _takeoff_ramp_vz_init, by roangel
💚 #12302 Differential thrust in Tailsitter is link to aileron not rudder, by bluecat1997
💚 #12299 Parameter for virtual battery in SITL, by potaito
💚 #12291 Copter lose altitude and start yaw in mission mode, by MKargus0

CLOSED ISSUES

❤️ #12316 Update submodule jMAVSim to latest Fri Jun 21 20:37:21 EDT 2019, by dagar
❤️ #12311 Fill in thrust field correctly for offboard rates setpoints on fixed wing, by Jaeyoung-Lim
❤️ #12308 px4io can't autostart and can't update, by Evaneee
❤️ #12303 Adding VTOL Octoplane airframe type, by irsdkv
❤️ #12301 [load_mon] pga460 low on stack!, by danielghirst
❤️ #12300 vscode: start gzclient GUI for Gazebo simulation, by julianoes
❤️ #12298 Refactored state-machine strings, by potaito
❤️ #12297 Enable setting simulation speed in VSCode, by julianoes
❤️ #12296 MC rate controller: add I term reduction factor , by bkueng
❤️ #12295 MC mixer: prioritize roll/pitch over yaw for full airmode, by bkueng
❤️ #12294 GPS takes way too long to lock or not locking at all, by HVKHVK
❤️ #12293 Mavlink ODOMETRY (331) support MAV_FRAME_BODY_FLU, by dagar
❤️ #12292 Can't change UAV-Type in Multi-UAV SITL Simulation, by tensarflow
❤️ #12289 Update submodule sitl_gazebo to latest Sun Jun 16 00:37:52 UTC 2019, by dagar
❤️ #12288 Update submodule mavlink v2.0 to latest Sun Jun 16 00:37:57 UTC 2019, by dagar

NOISY ISSUE

🔈 #12294 GPS takes way too long to lock or not locking at all, by HVKHVK
It received 4 comments.

PULL REQUESTS

Last week, 58 pull requests were created, updated or merged.

UPDATED PULL REQUEST

Last week, 34 pull requests were updated.
💛 #12317 Stable v1.9.1 fixes, by dagar
💛 #12306 launch: multiple sdf models, by lamping7
💛 #12304 Removed negative sign from _takeoff_ramp_vz_init, by roangel
💛 #12299 Parameter for virtual battery in SITL, by potaito
💛 #12279 Pr new vision mav mode, by DanielePettenuzzo
💛 #12259 init.d-posix: support running SITL slower, by julianoes
💛 #12239 Updated gnd_pos_control and removed gnd_att_control, by ItsTimmy
💛 #12229 vtol_att_control move to WQ with uORB callback scheduling, by dagar
💛 #12228 fw_pos_control_l1 move to WQ with uORB callback scheduling, by dagar
💛 #12227 ekf2 move to WQ with uORB callback scheduling, by dagar
💛 #12226 fw_att_control move to WQ with uORB callback scheduling, by dagar
💛 #12225 mc_att_control move to WQ with uORB callback scheduling, by dagar
💛 #12224 px4fmu move to WQ with uORB callback scheduling, by dagar
💛 #12220 Adjustable land speed via RC, by dakejahl
💛 #12209 Implement ModuleParams inheritance and DEFINE_PARAMETERS in the LandDetector class, by mcsauder
💛 #12179 Collision Prevention with distance sensor , by mrivi
💛 #12176 send_event: move to new WQ and uORB::Subscription, by dagar
💛 #12166 Allow more than 4 MC motors in VTOL Simulator, by irsdkv
💛 #12148 Thoneflow 3901U Driver, by mhkabir
💛 #12123 logger move to uORB::SubscriptionInterval, by dagar
💛 #12106 Adding ntest for unit testing on NuttX, by julianoes
💛 #11944 rename fields in tecs_status and make it EAS explicit , by CarlOlsson
💛 #11894 Migrate ulanding driver class member variable initialization to declarations, format whitespace and alphabetize/group/order var/method declarations, by mcsauder
💛 #11892 Migrate teraranger driver class member variable initialization to declarations, format whitespace and alphabetize/group/order var/method declarations, by mcsauder
💛 #11891 Migrate srf02 driver class member variable initialization to declarations, format whitespace and alphabetize/group/order var/method declarations, by mcsauder
💛 #11874 Cherry pick the src/modules/land_detector/ directory and voted_sensors_update.h from PR #9756, by mcsauder
💛 #11861 Change variable initialization to uniform initialization style and format whitespace in the pga460 driver., by mcsauder
💛 #11859 Refactor mb12xx driver class to allow for multiple sensors. Add ability to set sensor addresses. Deprecate rignbuffer and IOCTL., by mcsauder
💛 #11858 Migrate remaining member variable intialization to declarations, employ uniform initialization styling, and standardize method order within leddar_one.cpp, by mcsauder
💛 #11857 Migrate HC_SR04 class member variable initialization to declarations, augment code so that it compiles., by mcsauder
💛 #11853 Migrate cm8jl65 variable initialization from constructor list to declarations, format whitespace/comments, refactor, and deprecate IOCTL., by mcsauder
💛 #11776 Jenkinsfile run unit tests under AddressSanitizer, by dagar
💛 #11676 version: Expose PX4 git tag string, by sfalexrog
💛 #11629 Adis16477 driver standardization work, by mcsauder

MERGED PULL REQUEST

Last week, 24 pull requests were merged.
💜 #12316 Update submodule jMAVSim to latest Fri Jun 21 20:37:21 EDT 2019, by dagar
💜 #12311 Fill in thrust field correctly for offboard rates setpoints on fixed wing, by Jaeyoung-Lim
💜 #12303 Adding VTOL Octoplane airframe type, by irsdkv
💜 #12300 vscode: start gzclient GUI for Gazebo simulation, by julianoes
💜 #12298 Refactored state-machine strings, by potaito
💜 #12297 Enable setting simulation speed in VSCode, by julianoes
💜 #12296 MC rate controller: add I term reduction factor , by bkueng
💜 #12295 MC mixer: prioritize roll/pitch over yaw for full airmode, by bkueng
💜 #12293 Mavlink ODOMETRY (331) support MAV_FRAME_BODY_FLU, by dagar
💜 #12289 Update submodule sitl_gazebo to latest Sun Jun 16 00:37:52 UTC 2019, by dagar
💜 #12288 Update submodule mavlink v2.0 to latest Sun Jun 16 00:37:57 UTC 2019, by dagar
💜 #12284 hardfault_log: fix NULL terminator truncation, by bruenn
💜 #12253 commander refactor and cleanup offboard control mode, by dagar
💜 #12244 Update submodule ecl to latest Tue Jun 11 12:38:12 UTC 2019, by dagar
💜 #12222 drivers/px4io move to uORB::Subscription, by dagar
💜 #12207 uORB Subscription callbacks with WorkItem scheduling on publication, by dagar
💜 #12196 land_detector initiate cycle immediately, by dagar
💜 #12149 Fill the correct throttle field by checking its frametype in offboard mode., by SalimTerryLi
💜 #12147 Sensordots Mappydot+ driver, by mhkabir
💜 #12146 Enable gimbal control using SET_ACTUATOR_CONTROL_TARGET while controlling the vehicle offboard, by Jaeyoung-Lim
💜 #11896 Migrate vl53lxx driver class member variable initialization to declarations, formatting, and deprecate IOCTL usage., by mcsauder
💜 #11893 Migrate tfmini driver class member variable initialization to declarations, format whitespace and alphabetize/group/order var/method declarations, by mcsauder
💜 #11394 [READY FOR test] Add f7 bl update, by davids5
💜 #11274 Utilize DEFINE_PARAMETERS() macro for params in mavlink_receiver.cpp/h, by mcsauder

COMMITS

Last week there were 29 commits.
🛠️ [Update submodule jMAVSim to latest Sat Jun 22 12:37:52 UTC 2019 (#12316) - jMAVSim in PX4/Firmware (fb8630c): https://github.com/PX4/jMAVSim/commit/883413f8b97cc53d48491d6ff3630d6efd2e2467
- jMAVSim current upstream: https://github.com/PX4/jMAVSim/commit/def7501bc0536b8d1050f65d09c7dfbebcc0ce61
- Changes: https://github.com/PX4/jMAVSim/compare/883413f8b97cc53d48491d6ff3630d6efd2e2467...def7501bc0536b8d1050f65d09c7dfbebcc0ce61

 def7501 2019-06-18 romain-chiap - SIH support: add display-only mode for simulation-in-hardware (#101)](https://github.com/PX4/Firmware/commit/d96c97ed48813b0b93a01d4b669ee36dc2633104) by [dagar](https://github.com/dagar)

🛠️ Adding VTOL Octoplane airframe type (#12303) * Srcparser updated, default script for VTOL octoplane added. by irsdkv
🛠️ mc airframes: increase I gains a bit Previous commit allows to increase them again. Partially reverts commit 6c3e79f3614f0060d5998c39be358512101252ff. by bkueng
🛠️ mc rate controller: add I term reduction factor Reduce the I gain for high rate errors to reduce bounce-back effects after flips. Up to 200 degrees the gain is almost not reduced (<25%), so this will only take noticeable effects for large errors (setpoint changes), where we actually want to have an effect. This allows to increase the MC_*RATE_I parameters w/o negative effects when doing flips (i.e. bounce-back after flips). The 400 degrees limit and the x^2 are empirical. The better the rate tracking in general (high P gain), the less this is required (because of the lower tracking error). At the same time it also does not harm, as the i_factor will always be close to 1. by bkueng
🛠️ Mavlink: Fill in thrust field correctly for offboard rates setpoints on fixed wing (#12311) * Fill in thrust field for rates sp by Jaeyoung-Lim
🛠️ Update submodule ecl to latest Tue Jun 18 20:37:33 EDT 2019 - ecl in PX4/Firmware (4673dd0a0c9b90fcab84a26e75812a5c7172d1af): https://github.com/PX4/ecl/commit/0f49eb34a08e499a26d749ed981429047f2100ff - ecl current upstream: https://github.com/PX4/ecl/commit/a036cf82cc92ef6572ea7ee960cfff4d305c01fa - Changes: https://github.com/PX4/ecl/compare/0f49eb34a08e499a26d749ed981429047f2100ff...a036cf82cc92ef6572ea7ee960cfff4d305c01fa a036cf8 2019-06-14 Paul Riseborough - EKF: Remove use of of quaternion self product operator and fix delta rotation sign 0e946f2 2019-06-14 Paul Riseborough - EKF: Remove use of quaternion self product operator and fix delta rotation sign error ad7f7af 2019-05-21 CarlOlsson - ekf: correct quaternion multiplication order d6351bd 2019-05-21 CarlOlsson - EKF: update comment 7612fa4 2019-05-30 Paul Riseborough - EKF: Don't start using GPS for height until all validity checks have passed cef2ba5 2019-05-08 Roman - implemented Kahan summation algorithm for adding process noise to delta angle- and delta velocity bias variance by PX4BuildBot
🛠️ Mavlink receiver SET_ATTITUDE_TARGET fill the correct throttle field by checking its frametype in offboard mode (#12149) by SalimTerryLi
🛠️ vscode: add PX4_SIM_SPEED_FACTOR This env variable can be changed to adapt the simulation speed. by julianoes
🛠️ vscode: use lockstep This changes the VSCode debugging to use lockstep. For lockstep, the rate needs to be 250 Hz. by julianoes
🛠️ jMAVSim: use PX4_SIM_SPEED_FACTOR, not cli arg In order to be consistent between Gazebo and jMAVSim we should be using the env variable PX4_SIM_SPEED_FACTOR in the same way. This enables vscode to set the speed using the env variable. by julianoes
🛠️ vscode: start gzclient GUI for Gazebo simulation by julianoes
🛠️ commander: refactored state-machine strings - Follow-up changes to https://github.com/PX4/Firmware/pull/11796 by potaito
🛠️ uORB Subscription callbacks with WorkItem scheduling on publication (#12207) by dagar
🛠️ mc mixer: prioritize roll/pitch over yaw for full airmode Improves roll/pitch tracking in situations of large yaw demands. by bkueng
🛠️ Modify the update_params() comment to better reflect what is taking place in mavlink_receiver.h. by mcsauder
🛠️ Rename _param_sub to _param_update_sub and initialize. Re-define and re-implement the update_params() method and only call if parameters have been updated. by mcsauder
🛠️ Move variable initialization from constructor to declarations in MavlinkReceiver class, alphabetize var lists. Added update_params() method to ensure that parameters subscribed to are updated routinely. by mcsauder
🛠️ hardfault_log: fix NULL terminator truncation building "make omnibus_f4sd_default" with gcc 8.2.1 failes with: hardfault_log.c:315:7: error: 'strncat' specified bound 30 equals destination size gcc8 introduced -Wstringop-truncation, which will warn about NULL terminator truncation. This patch fixes two similar issues: - strncpy() makes no sense if we want to copy without NULL terminator - strncat() needs space to append the NULL terminator fixes #12283 by bruenn
🛠️ Mavlink ODOMETRY (331) support MAV_FRAME_BODY_FLU by dagar
🛠️ Update submodule mavlink v2.0 to latest Sun Jun 16 00:37:57 UTC 2019 - mavlink v2.0 in PX4/Firmware (067eb41d23252cbc5725f98e63ea56a2951da317): https://github.com/mavlink/c_library_v2/commit/70c1b4ef2db3244df23196bf2e47e369e2e8b78a
- mavlink v2.0 current upstream: https://github.com/mavlink/c_library_v2/commit/18cf6ff2fc0e51e4555b19fc31e8b06eb38bdd79
- Changes: https://github.com/mavlink/c_library_v2/compare/70c1b4ef2db3244df23196bf2e47e369e2e8b78a...18cf6ff2fc0e51e4555b19fc31e8b06eb38bdd79 by dagar
🛠️ [Update submodule sitl_gazebo to latest Sun Jun 16 00:37:52 UTC 2019 - sitl_gazebo in PX4/Firmware (648e7de): https://github.com/PX4/sitl_gazebo/commit/f2593dbcc2980dd15714925931fbb0e46a63a4b2
- sitl_gazebo current upstream: https://github.com/PX4/sitl_gazebo/commit/95adbb11f8deef06fb132bf0eb85c19e6ca00f6e
- Changes: https://github.com/PX4/sitl_gazebo/compare/f2593dbcc2980dd15714925931fbb0e46a63a4b2...95adbb1

 95adbb1 2019-06-08 David Jablonski - fix gstreamer package finding for ubuntu](https://github.com/PX4/Firmware/commit/115b8f83ef1d588ccc80bb75d2a715752e4aafce) by [dagar](https://github.com/dagar)

🛠️ [vl53lxx: migrate variable initialization from constructor list to declaration uniform initialization (#11896) * Format whitespace

CONTRIBUTORS

Last week there were 12 contributors.
👤 dagar
👤 irsdkv
👤 bkueng
👤 Jaeyoung-Lim
👤 PX4BuildBot
👤 SalimTerryLi
👤 julianoes
👤 potaito
👤 mcsauder
👤 bruenn
👤 davids5
👤 mhkabir

STARGAZERS

Last week there were 24 stagazers.
⭐ srandoux
⭐ XiaoaiSun
⭐ isaackay
⭐ ecust304
⭐ srqqq
⭐ q1426271062
⭐ jannsta1
⭐ hmjack2008
⭐ tomoyukim
⭐ yuchnw
⭐ rynaldi95
⭐ jindegithub
⭐ daumanec
⭐ syzhen
⭐ zhouliangyi
⭐ wangpengcheng
⭐ Nicknyr
⭐ BeingAmirMalik
⭐ Marxlp
⭐ kumekay
⭐ rachavludo
⭐ nowaylv
⭐ mslavescu
⭐ vhelmer
You all are the stars! 🌟

RELEASES

Last week there were no releases.

That's all for last week, please 👀 Watch and ⭐ Star the repository PX4/Firmware to receive next weekly updates. 😃

You can also view all Weekly Digests by clicking here.

Your Weekly Digest bot. 📆
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
[ARCHIVED] weekly-digest (depreciated)
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@dagar