CHANGELOG.md

@urql/core

5.0.6

Patch Changes

• Allow empty error messages when re-hydrating GraphQL errors Submitted by @JoviDeCroock (See #3650)

5.0.5

Patch Changes

• Removes double serialization of data in ssrExchange Submitted by @negezor (See #3632)

5.0.4

Patch Changes

• Change how we calculate the OperationKey to take files into account, before we would encode them to null resulting in every mutation with the same variables (excluding the files) to have the same key. This resulted in mutations that upload different files at the same time to share a result in GraphCache Submitted by @JoviDeCroock (See #3601)

5.0.3

Patch Changes

• Use documentId from persisted documents for document keys, when it's available Submitted by @kitten (See #3575)

5.0.2

Patch Changes

• ⚠️ Fix issue where a reexecute on an in-flight operation would lead to multiple network-requests. For example, this issue presents itself when Graphcache is concurrently updating multiple, inter-dependent queries with shared entities. One query completing while others are still in-flight may lead to duplicate operations being issued Submitted by @JoviDeCroock (See #3573)

5.0.1

Patch Changes

• ⚠️ Fix @ts-ignore on TypeScript peer dependency import in typings not being applied due to a leading ! character Submitted by @kitten (See #3567)

5.0.0

Major Changes

• Remove deprecated dedupExchange Submitted by @JoviDeCroock (See #3520)
• Remove deprecated maskTypename Submitted by @JoviDeCroock (See #3520)

Patch Changes

• Upgrade @0no-co/graphql.web to 1.0.5 Submitted by @kitten (See #3553)

4.3.0

Minor Changes

• Support Apollo Federation's format for subscription results in multipart/mixed responses (result properties essentially are namespaced on a payload key) Submitted by @JoviDeCroock (See #3499)
• Add support for sending persisted documents. Any DocumentNode with no/empty definitions and a documentId property is considered a persisted document. When this is detected a documentId parameter rather than a query string is sent to the GraphQL API, similar to Automatic Persisted Queries (APQs). However, APQs are only supported via @urql/exchange-persisted, while support for documentId is now built-in Submitted by @kitten (See #3515)

Patch Changes

• Allow url to be a plain, non-URL pathname (i.e. /api/graphql) to be used with preferGetMethod Submitted by @akrantz01 (See #3514)
• Correctly support the Headers class being used in fetchOptions Submitted by @JoviDeCroock (See #3505)

4.2.3

Patch Changes

• Add back our cache-outcome on the document-cache, this was behind a development flag however in our normalized cache we always add it already Submitted by @JoviDeCroock (See #3464)

4.2.2

Patch Changes

• ⚠️ Fix the default cacheExchange crashing on cache-only request policies with cache misses due to undefined results Submitted by @JoviDeCroock (See #3459)

4.2.1

Patch Changes

• ⚠️ Fix incorrect JSON stringification of objects from different JS contexts. This could lead to invalid variables being generated in the Vercel Edge runtime specifically Submitted by @SoraKumo001 (See #3453)

4.2.0

Minor Changes

• Try to parse text/plain content-type as JSON before bailing out with an error Submitted by @JoviDeCroock (See #3430)

4.1.4

Patch Changes

• Implement new @defer / @stream transport protocol spec changes Submitted by @JoviDeCroock (See #3389)
• Support non spec-compliant error bodies, i.e. the Shopify API does return errors but as an object. Adding a check whether we are really dealing with an Array of errors enables this Submitted by @JoviDeCroock (See #3395)
• ⚠️ Fix preferGetMethod: 'force' | 'within-url-limit' not being applied correctly by the Client Submitted by @Burbenog (See #3403)

4.1.3

Patch Changes

• ⚠️ Fix missing teardown operation handling in the ssrExchange. This could lead to duplicate network operations being executed Submitted by @kitten (See #3386)

4.1.2

Patch Changes

• Explicitly unblock client.reexecuteOperation calls to allow stalled operations from continuing and re-executing. Previously, this could cause @urql/exchange-graphcache to stall if an optimistic mutation led to a cache miss Submitted by @kitten (See #3363)

4.1.1

Patch Changes

• Add case for subscriptionExchange to handle GraphQLError[] received in the error observer callback. Note: This doesn't strictly check for the GraphQLError shape and only checks for arrays and receiving errors in the ExecutionResult on the next observer callback is preferred and recommended for transports Submitted by @kitten (See #3346)

4.1.0

Minor Changes

• Update formatDocument to output FormattedNode type mapping. The formatter will now annotate added __typename fields with _generated: true, place selection nodes' directives onto a _directives dictionary, and will filter directives to not include "_" underscore prefixed directives in the final query. This prepares us for a feature that allows enhanced client-side directives in Graphcache Submitted by @kitten (See #3317)

Patch Changes

• Add OperationContext.optimistic flag as an internal indication on whether a mutation triggered an optimistic update in @urql/exchange-graphcache's cacheExchange Submitted by @kitten (See #3308)

4.0.11

Patch Changes

• Re-order maskTypename to apply masking earlier in the chain Submitted by @kitten (See #3298)
• ⚠️ Fix ssrExchange not formatting query documents using formatDocument. Without this call we'd run the risk of not having __typename available on the client-side when rehydrating Submitted by @kitten (See #3288)
• Add deprecation notice for maskTypename option. Masking typenames in a result is no longer recommended. It’s only useful when multiple pre-conditions are applied and inferior to mapping to an input object manually Submitted by @kitten (See #3299)

4.0.10

Patch Changes

• Add missing fetchSubscriptions entry to OperationContext. The Client’s fetchSubscriptions now works properly and can be used to execute subscriptions as multipart/event-stream requests Submitted by @kitten (See #3244)
• ⚠️ Fix fetchSource not working for subscriptions since hasNext isn’t necessarily set Submitted by @kitten (See #3244)

4.0.9

Patch Changes

• Return AbortController invocation to previous behaviour where it used to be more forceful. It will now properly abort outside of when our generator yields results, and hence now also cancels requests again that have already delivered headers but are currently awaiting a response body Submitted by @kitten (See #3239)

4.0.8

Patch Changes

• Respect additionalTypenames on subscriptions and re-execute queries for them as well, as one would intuitively expect Submitted by @kitten (See #3230)
• Update build process to generate correct source maps Submitted by @kitten (See #3201)
• Don't allow isSubscriptionOperation option in subscriptionExchange to include teardown operations, to avoid confusion Submitted by @kitten (See #3206)

4.0.7

Patch Changes

• Publish with npm provenance Submitted by @kitten (See #3180)

4.0.6

Patch Changes

• Handle multipart/mixed variations starting with boundary rather than CRLF and a boundary Submitted by @kitten (See #3172)
• ⚠️ Fix regression which would disallow network-only operations after cache-and-network completed Submitted by @kitten (See #3174)

4.0.5

Patch Changes

• Replace File and Blob objects with null in variables if multipart request will be started Submitted by @kitten (See #3169)
• Strictly deduplicate cache-and-network and network-only operations, while a non-stale response is being waited for Submitted by @kitten (See #3157)
• ⚠️ Fix boundary stopping multipart/mixed streams when it randomly occurs in response payloads Submitted by @kitten (See #3155)
• Improve dispatching of arbitrary operations using reexecuteOperation Submitted by @kitten (See #3159)

4.0.4

Patch Changes

• ⚠️ Fix hasNext being defaulted to false when a new subscription event is received on the subscriptionExchange that doesn't have hasNext set Submitted by @kitten (See #3137)

4.0.3

Patch Changes

• Handle fetch rejections in makeFetchSource and properly hand them over to CombinedErrors Submitted by @kitten (See #3131)

4.0.2

Patch Changes

• ⚠️ Fix incremental delivery payloads not merging data correctly, or not handling patches on root results Submitted by @kitten (See #3124)

4.0.1

Patch Changes

• ⚠️ Fix format of map form data field on multipart upload requests. This was erroneously set to a string rather than a string tuple Submitted by @kitten (See #3118)

4.0.0

Major Changes

• Remove defaultExchanges from @urql/core and make exchanges a required property on Client construction. In doing so we make the urql package more tree-shakeable as the three default exchanges are in no code paths meaning they can be removed if not used. A migration would look as follows if you are currently creating a client without exchanges

  import { createClient, cacheExchange, fetchExchange } from '@urql/core';
  
  const client = createClient({
    url: '',
    exchanges: [cacheExchange, fetchExchange],
  });

  Submitted by @JoviDeCroock (See #3033)

• Update subscriptionExchange to receive FetchBody instead. In the usual usage of subscriptionExchange (for instance with graphql-ws) you can expect no breaking changes. However, the key and extensions field has been removed and instead the forwardSubscription function receives the full Operation as a second argument Submitted by @kitten (See #3054)

• Remove dependence on graphql package and replace it with @0no-co/graphql.web, which reduces the default bundlesize impact of urql packages to a minimum. All types should remain compatible, even if you use graphql elsewhere in your app, and if other dependencies are using graphql you may alias it to graphql-web-lite Submitted by @kitten (See #3097)

• Update OperationResult.hasNext and OperationResult.stale to be required fields. If you have a custom exchange creating results, you'll have to add these fields or use the makeResult, mergeResultPatch, or makeErrorResult helpers Submitted by @kitten (See #3061)

• Remove getOperationName export from @urql/core Submitted by @kitten (See #3062)

Minor Changes

• Return a new OperationResultSource from all Client methods (which replaces PromisifiedSource on shortcut methods). This allows not only toPromise() to be called, but it can also be used as an awaitable PromiseLike and has a .subscribe(onResult) method aliasing the subscribe utility from wonka Submitted by @kitten (See #3060)
• Update subscriptionExchange to support incremental results out of the box. If a subscription proactively completes, results are also now updated with hasNext: false Submitted by @kitten (See #3055)
• Implement text/event-stream response support. This generally adheres to the GraphQL SSE protocol and GraphQL Yoga push responses, and is an alternative to multipart/mixed Submitted by @kitten (See #3050)
• Implement GraphQL Multipart Request support in @urql/core. This adds the File/Blob upload support to @urql/core, which effectively deprecates @urql/exchange-multipart-fetch Submitted by @kitten (See #3051)
• Support GraphQLRequest.extensions as spec-extensions input to GraphQL requests Submitted by @kitten (See #3054)
• Allow subscriptions to be handled by the fetchExchange when fetchSubscriptions is turned on Submitted by @kitten (See #3106)
• Deprecate the dedupExchange. The functionality of deduplicating queries and subscriptions has now been moved into and absorbed by the Client. Previously, the Client already started doing some work to share results between queries, and to avoid dispatching operations as needed. It now only dispatches operations strictly when the dedupExchange would allow so as well, moving its logic into the Client Submitted by @kitten (See #3058)

Patch Changes

• Deduplicate operations as the dedupExchange did; by filtering out duplicate operations until either the original operation has been cancelled (teardown) or a first result (without hasNext: true) has come in Submitted by @kitten (See #3101)
• ⚠️ Fix source maps included with recently published packages, which lost their sourcesContent, including additional source files, and had incorrect paths in some of them Submitted by @kitten (See #3053)
• Allow makeOperation to be called with a partial OperationContext when it’s called to copy an operation. When it receives an Operation as a second argument now, the third argument, the context, will be spread into the prior operation.context Submitted by @kitten (See #3081)
• Move multipart/mixed to end of Accept header to avoid cauing Yoga to unnecessarily use it Submitted by @JoviDeCroock (See #3039)
• Upgrade to wonka@^6.3.0 Submitted by @kitten (See #3104)
• Update Exchange contract and composeExchanges utility to remove the need to manually call share on either incoming Source<Operation> or forward()’s Source<OperationResult>. This is now taken care of internally in composeExchanges and should make it easier for you to create custom exchanges and for us to explain them Submitted by @kitten (See #3082)
• Add support for graphql’s built-in TypedQueryDocumentNode typings for type inference Submitted by @kitten (See #3085)
• Add missing type exports of SSR-related types (SerializedResult, SSRExchangeParams, SSRExchange, and SSRData) to @urql/core's type exports Submitted by @kitten (See #3079)
• Allow any object fitting the GraphQLError shape to rehydrate without passing through a GraphQLError constructor in CombinedError Submitted by @kitten (See #3087)
• Add missing hasNext and stale passthroughs on caching exchanges Submitted by @kitten (See #3059)
• ⚠️ Fix incremental results not merging errors from subsequent non-incremental results Submitted by @kitten (See #3055)
• Add logic for request.extensions.persistedQuery to @urql/core to omit sending query as needed Submitted by @kitten (See #3057)
• ⚠️ Fix incorrect operation name being picked from queries that contain multiple operations Submitted by @kitten (See #3062)
• Replace fetch source implementation with async generator implementation, based on Wonka's fromAsyncIterable. This also further hardens our support for the "Incremental Delivery" specification and refactors its implementation and covers more edge cases Submitted by @kitten (See #3043)
• Ensure network errors are always issued with CombinedErrors, while downstream errors are re-thrown Submitted by @kitten (See #3063)
• Refactor Client result source construction code and allow multiple mutation results, if result.hasNext on a mutation result is set to true, indicating deferred or streamed results Submitted by @kitten (See #3102)
• Remove dependence on import { visit } from 'graphql'; with smaller but functionally equivalent alternative Submitted by @kitten (See #3097)

3.2.2

Patch Changes

• ⚠️ Fix generated empty Variables type as passed to generics, that outputs a type of { [var: string]: never; }. A legacy/unsupported version of typescript-urql, which wraps urql's React hooks, generates empty variables types as the following code snippet, which is not detected:

  type Exact<T extends { [key: string]: unknown }> = { [K in keyof T]: T[K] };
  type Variables = Exact<{ [key: string]: never }>;

  Submitted by @kitten (See #3029)

3.2.1

Patch Changes

• Bump to @urql/core@3.2.1 due to invalid 3.2.0 release Submitted by @kitten (See a84268db)

3.2.0

Minor Changes

• Update support for the "Incremental Delivery" payload specification, accepting the new incremental property on execution results, as per the specification. This will expand support for newer APIs implementing the more up-to-date specification Submitted by @kitten (See #3007)
• Update default Accept header to include multipart/mixed and application/graphql-response+json. The former seems to now be a defactor standard-accepted indication for support of the "Incremental Delivery" GraphQL over HTTP spec addition/RFC, and the latter is an updated form of the older Content-Type of GraphQL responses, so both the old and new one should now be included Submitted by @kitten (See #3007)

Patch Changes

• Add TSDoc annotations to all external @urql/core APIs Submitted by @kitten (See #2962)
• ⚠️ Fix subscriptions not being duplicated when hasNext isn't set. The hasNext field is an upcoming "Incremental Delivery" field. When a subscription result doesn't set it we now set it to true manually. This indicates to the dedupExchange that no duplicate subscription operations should be started Submitted by @kitten (See #3015)
• Expose consistent GraphQLRequestParams utility type from which GraphQLRequests are created in all bindings Submitted by @kitten (See #3022)

3.1.1

Patch Changes

• Correctly mark cache-hits from the ssr-exchange, by @JoviDeCroock (See #2872)
• ⚠️ Fix type-generation, with a change in TS/Rollup the type generation took the paths as src and resolved them into the types dir, by @JoviDeCroock (See #2870)
• ⚠️ Fix regression in @urql/core's stringifyDocument that caused some formatted documents to not be reprinted, by @JoviDeCroock (See #2871)

3.1.0

Minor Changes

• Implement mapExchange, which replaces errorExchange, allowing onOperation and onResult to be called to either react to or replace operations and results. For backwards compatibility, this exchange is also exported as errorExchange and supports onError, by @kitten (See #2846)

Patch Changes

• Move remaining Variables generics over from object default to Variables extends AnyVariables = AnyVariables. This has been introduced previously in #2607 but some missing ports have been missed due to TypeScript not catching them previously. Depending on your TypeScript version the object default is incompatible with AnyVariables, by @kitten (See #2843)
• Reuse output of stringifyDocument in place of repeated print. This will mean that we now prevent calling print repeatedly for identical operations and are instead only reusing the result once. This change has a subtle consequence of our internals. Operation keys will change due to this refactor and we will no longer sanitise strip newlines from queries that @urql/core has printed, by @kitten (See #2847)
• Update to wonka@^6.1.2 to fix memory leak in fetch caused in Node.js by a lack of clean up after initiating a request, by @kitten (See #2850)

3.0.5

Patch Changes

• Update typings of the client to encompass the changes of #2692, by @c-schwan (See #2758)
• ⚠️ Fix case where our transform-debug-target babel plugin would override the root dispatchDebug in compose.ts with the latest found exchange, in this case fetchExchange, by @JoviDeCroock (See #2762)

3.0.4

Patch Changes

• ⚠️ Fix ssrExchange bug which prevented staleWhileRevalidate from sending off requests as network-only requests, and caused unrelated network-only operations to be dropped, by @kitten (See #2691)
• Allow URL limit for GET requests to be bypassed using preferGetMethod: 'force' rather than the default true or 'within-url-limit' value, by @kitten (See #2692)
• ⚠️ Fix operation identities preventing users from deeply cloning operation contexts. Instead, we now use a client-wide counter (rolling over as needed). While this changes an internal data structure in @urql/core only, this change also affects the offlineExchange in @urql/exchange-graphcache due to it relying on the identity being previously an object rather than an integer, by @kitten (See #2732)

3.0.3

Patch Changes

• ⚠️ Fix variable types in core makeOperation, by @JoviDeCroock (See #2665)

3.0.2

Patch Changes

• ⚠️ Fix case where maskTypename would not traverse down when the root query-field does not contain a __typename, by @mlecoq (See #2643)

3.0.1

Patch Changes

• ⚠️ fix setting a client default requestPolicy, we set context.requestPolicy: undefined from our bindings which makes a spread override the client-set default, by @JoviDeCroock (See #2634)

3.0.0

Major Changes

• Goodbye IE11! 👋 This major release removes support for IE11. All code that is shipped will be transpiled much less and will not be ES5-compatible anymore, by @kitten (See #2504)
• Remove support for options on the Client and Client.createOperationContext. We've noticed that there's no real need for createOperationContext or the options on the Client and that it actually encourages modifying properties on the Client that are really meant to be modified dynamically via exchanges, by @kitten (See #2619)
• Implement stricter variables types, which require variables to always be passed and match TypeScript types when the generic is set or inferred. This is a breaking change for TypeScript users potentially, unless all types are adhered to, by @kitten (See #2607)
• Upgrade to Wonka v6 (wonka@^6.0.0), which has no breaking changes but is built to target ES2015 and comes with other minor improvements. The library has fully been migrated to TypeScript which will hopefully help with making contributions easier!, by @kitten (See #2504)

Minor Changes

• Remove the babel-plugin-modular-graphql helper, this because the graphql package hasn't converted to ESM yet which gives issues in node environments, by @JoviDeCroock (See #2551)

2.6.1

Patch Changes

• ⚠️ Fix missing React updates after an incoming response that schedules a mount. We now prevent dispatched operations from continuing to flush synchronously when the original source that runs the queue has terminated. This is important for the React bindings, because an update (e.g. setState) may recursively schedule a mount, which then disabled other setState updates from being processed. Previously we assumed that React used a trampoline scheduler for updates, however it appears that setState can recursively start more React work, by @kitten (See #2556)

2.6.0

Minor Changes

• Allow providing a custom isSubscriptionOperation implementation, by @n1ru4l (See #2534)

2.5.0

Minor Changes

• Add Accept header to GraphQL HTTP requests. This complies to the specification but doesn't go as far as sending Content-Type which would throw a lot of APIs off. Instead, we'll now be sending an accept header for application/graphql+json, application/json to indicate that we comply with the GraphQL over HTTP protocol. This also fixes headers merging to allow overriding Accept and Content-Type regardless of the user options' casing, by @kitten (See #2457)

Patch Changes

• Support aborting in withPromise cases, by @JoviDeCroock (See #2446)
• Passthrough responses with content type of text/* as error messages, by @kitten (See #2456)

2.4.4

Patch Changes

• cut off url when using the GET method at 2048 characters (lowest url-size coming from chromium), by @JoviDeCroock (See #2384)
• ⚠️ Fix issue where a synchronous toPromise() return would not result in the stream tearing down, by @JoviDeCroock (See #2386)

2.4.3

Patch Changes

• Prevent ignored characters in GraphQL queries from being replaced inside strings and block strings. Previously we accepted sanitizing strings via regular expressions causing duplicate hashes as acceptable, since it'd only be caused when a string wasn't extracted into variables. This is fixed now however, by @kitten (See #2295)

2.4.2

Patch Changes

• Undo logic to catch errors from incremental fetching and forking the response stream, introduce logic to detect results, by @JoviDeCroock (See #2287)

2.4.1

Patch Changes

• ⚠️ Fix mutation operation being used as compared identity and instead add a stand-in comparison, by @kitten (See #2228)

2.4.0

Minor Changes

• Allow for repeated mutations that have similar inputs which results in the same key, this is for instance the case with file uploads, by @JoviDeCroock (See #2189)

Patch Changes

• Bump @graphql-typed-document-node/core to 3.1.1 for graphql@16 support, by @JoviDeCroock (See #2153)
• ⚠️ Fix error bubbling, when an error happened in the exchange-pipeline we would treat it as a GraphQL-error, by @JoviDeCroock (See #2210)
• Filter network-only requests from the ssrExchange, this is to enable staleWhileRevalidated queries to successfully dispatch their queries, by @JoviDeCroock (See #2198)

2.3.6

Patch Changes

• Extend peer dependency range of graphql to include ^16.0.0. As always when upgrading across many packages of urql, especially including @urql/core we recommend you to deduplicate dependencies after upgrading, using npm dedupe or npx yarn-deduplicate, by @kitten (See #2133)

2.3.5

Patch Changes

• ⚠️ Fix issue where maskTypename would ignore array shapes, by @JoviDeCroock (See #2074)

2.3.4

Patch Changes

• Prevent Buffer from being polyfilled by an automatic detection in Webpack. Instead of referencing the Buffer global we now simply check the constructor name, by @kitten (See #2027)
• ⚠️ Fix error-type of an ExecutionResult to line up with subscription-libs, by @JoviDeCroock (See #1998)

2.3.3

Patch Changes

• Adding option to ssrExchange to include the extensions field of operation results in the cache, by @dios-david (See #1985)

2.3.2

Patch Changes

• ⚠️ Fix issue where the ssr-exchange would loop due to checking network-only revalidations, by @JoviDeCroock (See #1944)

2.3.1

Patch Changes

• ⚠️ Fix mark query.__key as non-enumerable so formatDocument does not restore previous invocations when cloning the gql-ast, by @JoviDeCroock (See #1870)
• ⚠️ Fix: update toPromise to exclude hasNext results. This change ensures that when we call toPromise() on a query we wont serve an incomplete result, the user will expect to receive a non-stale full-result when using toPromise(), by @JoviDeCroock (See #1880)

2.3.0

Minor Changes

• Add experimental support for @defer and @stream responses for GraphQL. This implements the "GraphQL Defer and Stream Directives" and "Incremental Delivery over HTTP" specifications. If a GraphQL API supports multipart/mixed responses for deferred and streamed delivery of GraphQL results, @urql/core (and all its derived fetch implementations) will attempt to stream results. This is only supported on browsers supporting streamed fetch responses, which excludes IE11. The implementation of streamed multipart responses is derived from meros by @maraisr, and is subject to change if the RFCs end up changing, by @kitten (See #1854)

2.2.0

Minor Changes

• Add a staleWhileRevalidate option to the ssrExchange, which allows the client to immediately refetch a new result on hydration, which may be used for cached / stale SSR or SSG pages. This is different from using cache-and-network by default (which isn't recommended) as the ssrExchange typically acts like a "replacement fetch request", by @kitten (See #1852)

Patch Changes

• ⚠️ Fix prevent mangling embedded strings in queries sent using the GET method, by @JoviDeCroock (See #1851)
• The single-source behavior previously wasn't effective for implementations like React, where the issue presents itself when the state of an operation is first polled. This led to the operation being torn down erroneously. We now ensure that operations started at the same time still use a shared single-source, by @JoviDeCroock (See #1850)

2.1.6

Patch Changes

• Warn for invalid operation passed to query/subscription/mutation, by @JoviDeCroock (See #1829)

2.1.5

Patch Changes

• Prevent ssrExchange().restoreData() from adding results to the exchange that have already been invalidated. This may happen when restoreData() is called repeatedly, e.g. per page. When a prior run has already invalidated an SSR result then the result is 'migrated' to the user's cacheExchange, which means that restoreData() should never attempt to re-add it again, by @kitten (See #1776)
• ⚠️ Fix accidental change in passive stale: true, where a cache-first operation issued by Graphcache wouldn't yield an affected query and update its result to reflect the loading state with stale: true. This is a regression from v2.1.0 and mostly becomes unexpected when cache.invalidate(...) is used, by @kitten (See #1755)

2.1.4

Patch Changes

• Prevent stale results from being emitted by promisified query sources, e.g. client.query(...).toPromise() yielding a partial result with stale: true set. Instead, .toPromise() will now filter out stale results, by @kitten (See #1709)

2.1.3

Patch Changes

• Treat empty variables the same as no variables in @urql/core's createRequest, by @kitten (See #1695)

2.1.2

Patch Changes

• ⚠️ Fix a condition under which the Client would hang when a query is started and consumed with toPromise(), by @kitten (See #1634)
• Refactor Client to hide some implementation details and to reduce size, by @kitten (See #1638)

2.1.1

Patch Changes

• ⚠️ Fix a regression in @urql/core@2.1.1 that prevented concurrent operations from being dispatched with differing request policies, which for instance prevented the explicit executeQuery calls on bindings to fail, by @kitten (See #1626)

2.1.0

Minor Changes

• With the "single-source behavior" the Client will now also avoid executing an operation if it's already active, has a previous result available, and is either run with the cache-first or cache-only request policies. This is similar to a "short circuiting" behavior, where unnecessary work is avoided by not issuing more operations into the exchange pipeline than expected, by @kitten (See #1600)
• Add consistent "single-source behavior" which makes the Client more forgiving when duplicate sources are used, which previously made it difficult to use the same operation across an app together with cache-and-network; This was a rare use-case, and it isn't recommended to overfetch data across an app, however, the new Client implementation of shared sources ensures that when an operation is active that the Client distributes the last known result for the active operation to any new usages of it (which is called “replaying stale results”) (See #1515)

Patch Changes

• Remove closure-compiler from the build step (See #1570)
• ⚠️ Fix inconsistency in generating keys for DocumentNodes, especially when using GraphQL Code Generator, which could cause SSR serialization to fail, by @zenflow (See #1509)

2.0.0

Major Changes

• Breaking: Remove pollInterval feature from OperationContext. Instead consider using a source that uses Wonka.interval and Wonka.switchMap over client.query()'s source, by @kitten (See #1374)
• Remove deprecated operationName property from Operations. The new Operation.kind property is now preferred. If you're creating new operations you may also use the makeOperation utility instead. When upgrading @urql/core please ensure that your package manager didn't install any duplicates of it. You may deduplicate it manually using npx yarn-deduplicate (for Yarn) or npm dedupe (for npm), by @kitten (See #1357)

Minor Changes

• Reemit an OperationResult as stale: true if it's being reexecuted as network-only operation to give bindings immediate feedback on background refetches, by @kitten (See #1375)

1.16.2

Patch Changes

• Add a workaround for graphql-tag/loader, which provides filtered query documents (where the original document contains multiple operations) without updating or providing a correct document.loc.source.body string, by @kitten (See #1315)

1.16.1

Patch Changes

• Add fragment deduplication to gql tag. Identical fragments can now be interpolated multiple times without a warning being triggered or them being duplicated in gql's output, by @kitten (See #1225)

1.16.0

Minor Changes

• Add a built-in gql tag function helper to @urql/core. This behaves similarly to graphql-tag but only warns about locally duplicated fragment names rather than globally. It also primes @urql/core's key cache with the parsed DocumentNode, by @kitten (See #1187)

Patch Changes

• ⚠️ Fix edge case in formatDocument, which fails to add a __typename field if it has been aliased to a different name, by @kitten (See #1186)
• Cache results of formatDocument by the input document's key, by @kitten (See #1186)

1.15.2

Patch Changes

• Don't add undefined to any property of the ssrExchange's serialized results, as this would crash in Next.js, by @JoviDeCroock (See #1168)

1.15.1

Patch Changes

• Export getOperationName from @urql/core and use it in @urql/exchange-execute, fixing several imports, by @JoviDeCroock (See #1135)

1.15.0

Minor Changes

• Improve the Suspense implementation, which fixes edge-cases when Suspense is used with subscriptions, partially disabled, or used on the client-side. It has now been ensured that client-side suspense functions without the deprecated suspenseExchange and uncached results are loaded consistently. As part of this work, the Client itself does now never throw Suspense promises anymore, which is functionality that either way has no place outside of the React/Preact bindings, by @kitten (See #1123)

Patch Changes

• Use Record over object type for subscription operation variables. The object type is currently hard to use (see this issue), by @enisdenjo (See #1119)
• Add support for TypedDocumentNode to infer the type of the OperationResult and Operation for all methods, functions, and hooks that either directly or indirectly accept a DocumentNode. See graphql-typed-document-node and the corresponding blog post for more information., by @kitten (See #1113)
• Refactor useSource hooks which powers useQuery and useSubscription to improve various edge case behaviour. This will not change the behaviour of these hooks dramatically but avoid unnecessary state updates when any updates are obviously equivalent and the hook will furthermore improve continuation from mount to effects, which will fix cases where the state between the mounting and effect phase may slightly change, by @kitten (See #1104)

1.14.1

Patch Changes

• ⚠️ Fix the production build overwriting the development build. Specifically in the previous release we mistakenly replaced all development bundles with production bundles. This doesn't have any direct influence on how these packages work, but prevented development warnings from being logged or full errors from being thrown, by @kitten (See #1097)

1.14.0

This version of @urql/core renames Operation.operationName to Operation.kind. For now the old property is merely deprecated and will issue a warning if it's used directly. That said, all exchanges that are released today also need this new version of @urql/core@>=1.14.0, so if you upgrade to any of the following packages, you will also need to upgrade @urql/core. If you upgrade and see the deprecation warning, check whether all following exchanges have been upgraded:

• @urql/exchange-auth@0.1.2
• @urql/exchange-execute@1.0.2
• @urql/exchange-graphcache@3.1.8
• @urql/exchange-multipart-fetch@0.1.10
• @urql/exchange-persisted-fetch@1.2.2
• @urql/exchange-populate@0.2.1
• @urql/exchange-refocus@0.2.1
• @urql/exchange-retry@0.1.9
• @urql/exchange-suspense@1.9.2

Once you've upgraded @urql/core please also ensure that your package manager hasn't accidentally duplicated the @urql/core package. If you're using npm you can do so by running npm dedupe, and if you use yarn you can do so by running yarn-deduplicate.

If you have a custom exchange, you can mute the deprecation warning by using Operation.kind rather than Operation.operationName. If these exchanges are copying or altering operations by spreading them this will also trigger the warning, which you can fix by using the new makeOperation helper function.

Minor Changes

• Deprecate the Operation.operationName property in favor of Operation.kind. This name was previously confusing as operationName was effectively referring to two different things. You can safely upgrade to this new version, however to mute all deprecation warnings you will have to upgrade all urql packages you use. If you have custom exchanges that spread operations, please use the new makeOperation helper function instead, by @bkonkle (See #1045)

Patch Changes

• Add missing .mjs extension to all imports from graphql to fix Webpack 5 builds, which require extension-specific import paths for ESM bundles and packages. This change allows you to safely upgrade to Webpack 5., by @kitten (See #1094)

1.13.1

Patch Changes

• Allow client.reexecuteOperation to be called with mutations which skip the active operation minimums, by @kitten (See #1011)

1.13.0

Please note that this release changes the data structure of the ssrExchange's output. We don't treat this as a breaking change, since this data is considered a private structure, but if your tests or other code relies on this, please check the type changes and update it.

Minor Changes

• Adds an error exchange to urql-core. This allows tapping into all graphql errors within the urql client. Useful for logging, debugging, handling authentication errors etc, by @kadikraman (See #947)

Patch Changes

• ⚠️ Fix condition where mutated result data would be picked up by the ssrExchange, for instance as a result of mutations by Graphcache. Instead the ssrExchange now serializes data early, by @kitten (See #962)
• Omit the Content-Type: application/json HTTP header when using GET in the fetchExchange, persistedFetchExchange, or multipartFetchExchange, by @JoviDeCroock (See #957)

1.12.3

Patch Changes

• Remove whitespace and comments from string-queries, by @JoviDeCroock (See #911)
• Remove redundant whitespaces when using GET for graphql queries, by @JoviDeCroock (See #908)

1.12.2

Patch Changes

• ⚠️ Fix formatDocument mutating parts of the DocumentNode which may be shared by other documents and queries. Also ensure that a formatted document will always generate the same key in createRequest as the original document, by @kitten (See #880)
• ⚠️ Fix ssrExchange invalidating results on the client-side too eagerly, by delaying invalidation by a tick, by @kitten (See #885)

1.12.1

Patch Changes

• ⚠️ Fix timing for out-of-band client.reexecuteOperation calls. This would surface in asynchronous caching scenarios, where no result would be delivered by the cache synchronously, while it still calls client.reexecuteOperation for e.g. a network-only request, which happens for cache-and-network. This issue becomes especially obvious in highly synchronous frameworks like Svelte, by @kitten (See #860)
• Replace unnecessary scheduleTask polyfill with inline Promise.resolve().then(fn) calls, by @kitten (See #861)

1.12.0

As always, please ensure that you deduplicate @urql/core when upgrading. Additionally deduplicating the versions of wonka that you have installed may also reduce your bundlesize.

Minor Changes

• Expose a client.subscription shortcut method, similar to client.query and client.mutation, by @FredyC (See #838)

Patch Changes

• Upgrade to a minimum version of wonka@^4.0.14 to work around issues with React Native's minification builds, which use uglify-es and could lead to broken bundles, by @kitten (See #842)

1.11.8

Patch Changes

• Add operationName to GET queries, by @jakubriedl (See #798)

1.11.7

Patch Changes

• Add source debug name to all dispatchDebug calls during build time to identify events by which exchange dispatched them, by @JoviDeCroock (See #780)

1.11.6

Patch Changes

• Add a "./package.json" entry to the package.json's "exports" field for Node 14. This seems to be required by packages like rollup-plugin-svelte to function properly, by @JoviDeCroock (See #771)

1.11.5

Patch Changes

• Hoist variables in unminified build output for Metro Bundler builds which otherwise fails for process.env.NODE_ENV if-clauses, by @kitten (See #737)
• Add a babel-plugin that removes empty imports from the final build output, by @JoviDeCroock (See #735)

1.11.4

Patch Changes

Sorry for the many updates; Please only upgrade to >=1.11.4 and don't use the deprecated 1.11.3 and 1.11.2 release.

• ⚠️ Fix nested package path for @urql/core/internal and @urql/exchange-graphcache/extras, by @kitten (See #734)

1.11.3

Patch Changes

• Make the extension of the main export unknown, which fixes a Webpack issue where the resolver won't pick module fields in package.json files once it's importing from another .mjs file, by @JoviDeCroock (See #733)

1.11.1

Patch Changes

• ⚠️ Fix missing @urql/core/internal entrypoint in the npm-release, which was previously not included, by @JoviDeCroock (See #731)

1.11.0

Minor Changes

• Add debugging events to exchanges that add more detailed information on what is happening internally, which will be displayed by devtools like the urql Chrome / Firefox extension, by @andyrichardson (See #608)
• Add @urql/core/internal entrypoint for internally shared utilities and start sharing fetchExchange-related code, by @kitten (See #722)

Patch Changes

• ⚠️ Fix stringifyVariables breaking on x.toJSON scalars, by @kitten (See #718)

1.10.9

Patch Changes

• Pick modules from graphql package, instead of importing from graphql/index.mjs, by @kitten (See #700)

1.10.8

Patch Changes

• Add graphql@^15.0.0 to peer dependency range, by @kitten (See #688)
• ⚠️ Fix non-2xx results never being parsed as GraphQL results. This can result in valid GraphQLErrors being hidden, which should take precedence over generic HTTP NetworkErrors, by @kitten (See #678)

1.10.7

Patch Changes

• ⚠️ Fix oversight in edge case for #662. The operation queue wasn't marked as being active which caused stale results and cache-and-network operations from reissuing operations immediately (unqueued essentially) which would then be filtered out by the dedupExchange, by @kitten (See #669)

1.10.6

Patch Changes

• ⚠️ Fix critical bug in operation queueing that can lead to unexpected teardowns and swallowed operations. This would happen when a teardown operation kicks off the queue, by @kitten (See #662)

1.10.5

Patch Changes

• Refactor a couple of core helpers for minor bundlesize savings, by @kitten (See #658)
• Add support for variables that contain non-plain objects without any enumerable keys, e.g. File or Blob. In this case stringifyVariables will now use a stable (but random) key, which means that mutations containing Files — or other objects like this — will now be distinct, as they should be, by @kitten (See #650)

1.10.4

Patch Changes

• ⚠️ Fix node resolution when using Webpack, which experiences a bug where it only resolves package.json:main instead of module when an .mjs file imports a package, by @JoviDeCroock (See #642)

1.10.3

Patch Changes

• ⚠️ Fix Node.js Module support for v13 (experimental-modules) and v14. If your bundler doesn't support .mjs files and fails to resolve the new version, please double check your configuration for Webpack, or similar tools, by @JoviDeCroock (See #637)

1.10.2

Patch Changes

• Add a guard to "maskTypenames" so a null value isn't considered an object, by @JoviDeCroock (See #621)

1.10.1

Patch Changes

• ⚠️ Fix Rollup bundle output being written to .es.js instead of .esm.js, by @kitten (See #609)

1.10.0

Minor Changes

• Add additionalTypenames to the OperationContext, which allows the document cache to invalidate efficiently when the __typename is unknown at the initial fetch, by @JoviDeCroock (See #601) You can learn more about this change in our docs.

Patch Changes

• Add missing GraphQLError serialization for extensions and path field to ssrExchange, by @kitten (See #607)

1.9.2

Patch Changes

• Prevent active teardowns for queries on subscriptionExchange, by @kitten (See #577)

1.9.1

Patch Changes

• ⚠️ Fix cache-only operations being forwarded and triggering fetch requests, by @JoviDeCroock (See #551)
• Adds a one-tick delay to the subscriptionExchange to prevent unnecessary early tear downs, by @JoviDeCroock (See #542)
• Add enableAllOperations option to subscriptionExchange to let it handle queries and mutations as well, by @kitten (See #544)

1.9.0

Minor Changes

• Adds the maskTypename export to urql-core, this deeply masks typenames from the given payload. Masking __typename properties is also available as a maskTypename option on the Client. Setting this to true will strip typenames from results, by @JoviDeCroock (See #533)
• Add support for sending queries using GET instead of POST method (See #519)
• Add client.readQuery method (See #518)

Patch Changes

• ⚠️ Fix ssrExchange not serialising networkError on CombinedErrors correctly. (See #515)
• Add explicit error when creating Client without a URL in development. (See #512)